Any "burps" with Snow Leopard?

Just touching base with the folks to see if there have been any problems installing and using Snow Leopard. I will be installing it next week.
Thank you.

On the one side, there are always problems. On the other side, it depends on your hardware and add-ons, as well as 3rd party software - and your system's health.
I can't even keep up with the traffic on Snow Leopard:
http://discussions.apple.com/category.jspa?categoryID=263

Similar Messages

Are there any problems with Snow Leopard Server (Xserve) and PPC Clients

Hi,
are there any problems identified yet with Snow Leopard Server, installed on a Xserve and PPC Clients running Mac OS X Tiger and Leopard?
Currently I have a Xserve Intel running Leopard Server and about 12 Mac Minis PPC running Mac OS X Tiger and Mac OS X Leopard. The Xserve serves services like DNS, OpenDirectory, Software Update Server, NetBoot, etc. All users have Home Directories stored on the Xserve.
Now I want to install Snow Leoaprd Server on the Xserve, but I wonder if there are any problems using the PPC Clients? I have read something like this on a german website.
Thanks!

We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

M-audio profire 610 any issues with snow leopard?

anyone using profire 610 with snow leopard?...any issues?..

For a Profire 610/2626 work around see here:
http://forums.m-audio.com/showthread.php?t=11831
This works for me using a Profire 610, Mac Pro and 10.6.1.

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?

Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?

Once the Lion download is complete quit the installer and follow these directions. The file you need to make a boot disk disappears after you install Lion.
Egg Freckles | Burning A Lion Boot Disc
However, the Lion installation includes a recovery partition. It won't be of help if your entire HD dies but is very handy otherwise. This Knowledge Base article has a lot of good information about Lion's recovery partition.
OS X Lion: About Lion Recovery

I face a problem with my macbook air or i think it's from the lion OS cause i didn't happen with snow leopard OS the massage says ( you can't open the application ....... because powerPC applications are no longer supported) any advice ??

I face a problem with my macbook air or i think it's from the lion OS cause i didn't happen with snow leopard OS the massage says ( you can't open the application ....... because powerPC applications are no longer supported). any advice ??

Mac OS X Lion has dropped support for Rosetta, the feature that allowed you to run PowerPC apps on previous OS X systems. Check if you can find a newer version of the app you are trying to run that supports Intel processors.
What application are you trying to run? Maybe I can help you find a version that runs on Lion.

I had an iMac with Snow Leopard 10.6.8, I downloaded and installed Lion, did not make me any questions. After the reboot I get this fatal error: Panic(cpu 0 ......) Kernel trap ......

I had an iMac with Snow Leopard 10.6.8, I downloaded and installed Lion, did not make me any questions. After the reboot I get this fatal error: Panic(cpu 0 ......) Kernel trap ......

Please post the Kernel Panic report. You will find it at /Library/Logs/DiagnosticReports per
http://support.apple.com/kb/ht2546
When we look at the KP report we may find some clues why it is occuring.

After downloading Lion the noise level of the fans increased. A noise which did not exist with Snow Leopard. Any ideas how to reduce noise?

After downloading Lion the noise level of (what I believe to be ) the fans increased. A humming noise which did not exist with Snow Leopard. Any ideas how to reduce this noise?

I have seen this mentioned a dozen times, here, on Lion,and MacRumors.
Nope. Usual suspects.
And whether you tried a clean install instead (backup and erase) and then use MA to import

Had to restore my Mac Book with Snow Leopard. My i Life disc appears to be damaged, and I can't restore my iPhoto application. I have searched for downloads but all appear to be upgrades. Any ideas on how to restore iphotos

Had to restore my Mac Book with Snow Leopard. My i Life disc appears to be damaged, and I can't restore my iPhoto application. I have searched for downloads but all appear to be upgrades. Any ideas on how to restore iphotos

Given what you describe you will have to upgrade Snow Leopard by downloading and installing Mac OS X 10.6.8 Update Combo v1.1. Then go to the App Store and sign in with your Apple ID. Purchase and download Mountain Lion to upgrade your OS. Then purchase the latest upgrades for the iLife applications which includes iPhoto.
Or you can go on eBay, Google, or Amazon and purchase another copy of the DVD based iLife.

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

Dear Nathan,
Many thanks. To the best of my memory, that is how I got where I am today. Initially I had one failed setup, then discovered compatibility mode and ran using it. The result was not an obvious failure, but something was not there because not only were some drivers missing (wi-fi, trackpad, ...) but (much to my disappointment) the 3.1 update would not run. It complained that 3.0 wasn't there. If I hardwired to my home network, the machine would do almost everything I wanted, but the graphics were slow and clumsy. That is when I hunted around for the NVidia driver and downloaded it from NVidia. And that is where I stand now.
My son found this link http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
which has instructions claiming to do the install straight to Win 7 without using compatibility mode.
Given that my clumsy efforts to patch things up have probably necessitated a Win 7 deinstall and reinstall to test either your plan or the one my son found, I am inclined to sit tight for a couple of days to see how much I can learn.
I appreciate your interest in this problem, and if you are up for reading the process at the link my son found and commenting, I would be grateful.
In any case, many thanks, Paul

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

I have an imac with snow leopard. I do not have enough memory to get lion. I switched my mail to icloud and now my ipod touch has icloud. i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly

I have an imac with snow leopard. I do not have enough memory to get lion.
I switched my mail to icloud and now my ipod touch has icloud.
i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly any more. There is an exclamation point on my mail in box and also an ! on .mac.
Can anyone help me with settings so I can receive mail again directly on my mac?
Thanks
Mathmarv
<Edited by Host>

See this Apple note on troubleshooting icloud mail: http://support.apple.com/kb/TS4002
You may have seen this page already: http://www.apple.com/support/icloud/mail-notes/

Tons of problems with Snow Leopard

Made this post over at my blog but I figure this would be a better forum for it in hopes we can get some of these issues resolved... it seems like Apple has pulled a Microsoft and released what appears to be a beta version of Snow Leopard! Inexcusable bugs are appearing left and right, and the supposed "improvements" have actually hindered my computer performance and productivity...
This really surprised me. After years of releasing amazing OS upgrades that seemed to make the best OS even better, it seems like Apple has taken 2 steps back with Snow Leopard. I can't tell you how upset I was to realize I was experiencing many problems that I previously only saw on PCs.
After one of the many bugs popped up again on my computer, I got frustrated and started combing the internets for a list of known bugs in the OS and the inevitable slew of Apple users registering their disgust. Unfortunately, my search didn't turn up anything but positive reviews of the OS and very limited complaints on a few message boards. To this end, I'm posting this entry to try and help other users who are experiencing similar issues and hopefully get Apple to clean up this mess of an OS.
Below I've created (and will be adding to) a list of problems I've experienced in OS X 10.6, Snow Leopard. I encourage everyone to list your Snow Leopard issues in the comments as well, in hopes we can create a master list of problems.
I am using a 2 GHz Black MacBook (Core 2 Duo) with 2GB of RAM. Keep in mind Leopard (OS 10.5) was running flawlessly on this more than capable machine. I am currently running the latest Snow Leopard build, 10.6.1. I upgraded 10.5 with the retail version of Snow Leopard, integrating my current apps into 10.6 (did not do a clean install). I've organized my issues below by application. This post is less about third-party applications and more about Apple apps/built-in OS features, as Apple is fully accountable for these pieces.
APPLE APPS
Airport:
• Airport is now incredibly slow getting past the "searching" status message and into what was known as "scanning" status in 10.5 (now called "Looking For Networks…" status message). This issue occurs most often when I revive the computer from sleep. I have to turn Airport off and on again, then wait an inordinate amount of time to get past the useless "Searching…" message.
Volume and Sound:
• I rely on my volume control icon on the toolbar. I change my system volume dozens of times every day (due to my job)... previously, I could click the volume icon then simply roll the scroll wheel on my two-button mouse to adjust the volume. Now, I have to actually move my mouse down onto the volume slider area before my scroll wheel works! What gives? In allowing the user to fine-tune the volume levels, Apple removed this functionality for some reason? This is a real pain for me as the extra second it takes to do this really adds up by the end of the day.
• Sound now starts stuttering for no reason? When I wake my computer up from sleep and I have headphones or speaker plugged in, the audio stutters greatly. I have to unplug then re-plug my speakers or headphones to fix the issue! This is a problem I saw on many PCs due to sound cards not playing with Windows nicely, but was NEVER an issue I experienced using OS X.
• The Mac OS startup chime plays on my MacBook external speaker when I startup, even though I have speakers or headphones plugged in! It also does not matter if I had my system volume on mute when restarting • the OS seems to now decide what volume my system should be at when I start up!
Safari:
• Defaults to 64-bit mode silently, and this breaks most plug-ins (my issue was with download manager iGetter, specifically). I had to manually Get Info on the app, then switch back to 32-bit mode, which it seems Apple has not designed Snow Leopard to support properly?
• Freezes and crashes more often, most often when running Flash video. This occurs when I open multiple videos on YouTube, for example.
• Hogging memory even more than it used to (1GB of RAM to run the app?? Really?)
Stacks:
• Apple seems to have completely removed the functionality or sortable sub-folder listings? For example, if I choose to sort my stack by "Date Modified", the initial list of folders in the stack appear by date, but all my sub-folders appear in Alpha order, and there is no way to change this! Come on Apple, why remove this?
iPhoto:
• Freezes completely when I go to "Export…". My Export opens on the Facebook tab of the dialogue box, and it seems the issue occurs when iPhoto can't find the source image. Rather than an error message though, I get the color wheel of death.
Spotlight/Search:
• When I search from a Finder window, sometimes I get the new feature of sortable results columns to work, but sometimes I don't. Seems arbitrary when it works and when it doesn't.
System Preferences:
• More of an annoyance, System Preferences now has to restart the first time I click on any third-party preference in "Other". Some work, most don't.
Install:
• In previous OS X upgrades, Apple gave me the option to "Backup and Install". This option was not present on Snow Leopard, so not sure what a user can d if they do not have a Time Machine backup and their install fails.
Preview:
• Preview slows down considerably when opening multiple files.
THIRD-PARTY APPS
Entourage:
• Entourage froze up when I tried to simply delete one of my email accounts. The Accounts window went blank and the application froze.
CS3:
• Slower than ever, Photoshop is running at a snail's pace.
I hope everyone can contribute to this string and get Apple to fix these problems.

I can address some of these:
Safari defaults to 64-bit mode silently, and this breaks most plug-ins (my issue was with download manager iGetter, specifically). I had to manually Get Info on the app, then switch back to 32-bit mode, which it seems Apple has not designed Snow Leopard to support properly?
All applications, to the best of my knowledge, will run in 64-bit if they include 64-bit code. With most you'll never notice, but if an application supports plugins, then you have to pay attention to whether the plug-in is available in a 64-bit version. More and more are becoming available, but not all. If you have plug-ins that aren't, you need to set the app - Safari or whatever - to 32-bit mode. This is not a bug; it's necessitated by the conversion to full-time 64-bit support. The developer of iGetter claims that an update for compatibility with Safari in 64-bit mode is under development but no time frame has been given.
Snow Leopard is perfectly capable of running 32-bit apps. You just can't mix them, running a 32-bit plugin in a 64-bit app.
Freezes and crashes more often, most often when running Flash video. This occurs when I open multiple videos on YouTube, for example.
Have you installed the latest version of Flash? Flash is almost always a bit problematical, but I've had no problems running Flash content on any site with SL.
Hogging memory even more than it used to (1GB of RAM to run the app?? Really?)
This may just be an issue of not being clear on how Mac OS X allocates memory. This article may provide some insight:
http://support.apple.com/kb/HT1342
More of an annoyance, System Preferences now has to restart the first time I click on any third-party preference in "Other". Some work, most don't.
This is normal if a preference pane has not been provided in a 64-bit version.
In previous OS X upgrades, Apple gave me the option to "Backup and Install". This option was not present on Snow Leopard
Actually it was called "archive and install" and was removed as an option as no longer necessary. The normal installation creates all necessary new files and more robustly replaces old ones, so having an archive of the old system folder was deemed to no longer be needed.
so not sure what a user can d if they do not have a Time Machine backup and their install fails.
To restore completely from a full Time Machine backup, you erase the disk using Disk Utility from the menu in the Installer, then choose to restore from a TM backup.
Preview slows down considerably when opening multiple files.
Seems to work OK for me. I've had as many as twenty open with no noticeable slowdown. But you may be opening much larger documents than I have.
Entourage froze up when I tried to simply delete one of my email accounts. The Accounts window went blank and the application froze.
Impossible to offer any advice here without knowing what version of Entourage you're using, whether it's been fully updated, and what type of email account this was.
Regards.

My XP printer no longer works with snow leopard over the network

My XP networked printer (Samsung 4200) no longer works with snow leopard after Mac update. Printer hooked up to XP and can access it through network.
When I print it requests that I to authenticate the printer with a user name and password but it's not password protected. I don't have a password, but I tried all the usuals anyways.
It worked fine a couple days ago, and I've tried everything since. I've reset my printers, turned off both computers. Plugged the printer directly into the Mac - didn't work at first but downloaded a new driver Splix - 2 (Samsung doesn't make an OS X driver for this printer) and got it working. Reinstalled Bonjour on the PC, which can't even see a printer now. Any help would be hugely appreciated.
THanks in advance.

helpthismacuser wrote:
When I print it requests that I to authenticate the printer with a user name and password but it's not password protected. I don't have a password, but I tried all the usuals anyways.
Connecting from a Mac to Windows is password protected. If you tried to connect to a shared folder on Windows you would also be prompted to enter your Windows credentials. So when you do print next time, enter your Windows user details and password. If XP has no password then set one - it is bad practise to have a Windows computer without a password. And updates to Mac OS X expect you to have one set in the Windows computer.
If for some reason you don't want to set a password in XP then enable the Guest account and you can use this on the Mac when you get the prompt (either select Guest or type it in).

Any "burps" with Snow Leopard?

Similar Messages

Maybe you are looking for