Any business Object for CJ02?

hello friends,
can any one of u tell me the Business Object for the transaction CJ02?
I want to trigger my workflow when Status of WBS element changes to released.
Thanks,
Romanch

Hi,
You can use BUS2054. If you want to trigger when status changes, then u need to create new event and make entries in BSVW tcode.

Similar Messages

  • Any business object for Organisation Unit Create

    is there any business object for Organisation Unit Creation. BUS0018 is available but there it is not defined. basically on saving the Organisation Unit in PP01 Transaction, a workflow should be triggered to send a mail to the Requestor intimating him that the org unit has been created.
    points will be awarded even to the slightest cues.

    Hi,
    Did you check SWEHR2 to see if there are any clues there? I found object PDOTYPE_O there. But it triggers an event for BOR BUS1221. So depending on your needs you could use one of these maybe. The problem is PDOTYPE_O doesn't have any events, so you would need to create a subtype and delegate it. In the subtype you could create your own events which you could call using SWEHR3.
    Regards,
    Martin

  • Any business Object for CJ92?

    Hello friends,
    cam any one of u tell me the standard business object for the transaction CJ92? or any BADI / BTE ?
    I want to trigger my workflow on saving WBS.
    Thanks,
    Romanch

    You can use BUS2054 if WBS Element is attached to project or you can use BUS2001 or bus2001001.
    Thanks
    Arghadip

  • Business Object for asset accounting/capitalization

    Hello frineds,
    I need to develop a work flow to notify IO owner when IO status changes to RELEASED.
    my workflow needs to be triggered once we save the internal order.
    1) I am not getting any Business Object for this asset accounting. do u have any suggestion?
    2) Can u tell me how to save the internal order through which my workflow is getting triggered?
    My requirement is to use the transaction *  CJ92 , CJ20N, ko02 or ko04 * for changing the IO status to released.
    Thanks,
    Romanch

    Hi,
    In the transaction KO02, U can find one tab Control data, In that Control data tab u can change the status to released.
    Thanks and Regards,
    Chandra M

  • Business  Object for Transaction CJ02

    Helllo friends,
    can anyone tell me the business object for the transaction CJ02 ?
    I need to trigger the workflow when WBS element's status chagnes to release.
    Thank u for your help.
    Romanch

    hi Argahdip,
    BUS2054 is the BO that I was looking for.
    Thanks,
    Romanch

  • How to Find Business Objects for any Tranaction .

    Hi Abapers,
                        How to find Business objects for any transcation.....  and how to connect the Work flow to  any  Trancation  so that for example any body changes the date of Birth ...... so that the work flow should trigger .
    Thanks & Regards
    Bhaskar Rao.M

    Hi Bhaskar,
    For finding business object,you can try transaction SWO4 and by checking the documentation in it you can find your required business object.
    Another method is:
    1) Go to Trx SWE4 and switch on the event trace.
    2) Run your transaction which you want to use for triggering your workflow.
    3) Run transaction SWEL and find your Business Object and related event in it.
    For connnecting your WF to your transaction you have to create a start event in your WF in SWDD,where in you specify the Business Object and start event which you find using above method.
    Eg.You want your WF to be triggered whenever you have an error in your idoc.For this your BO will be IDOCAPPL and your event will be (inputErrorOccurred).This you will give in header data in SWDD.
    Neerja

  • Create a business object for a Maintenance object

    Hello,
    I want to create a business object for a maintenance object to change all XML attributes to XML elements.
    Should I have to change the whole XML Schema from attributes to elements one by one?
    For example, I create the business object CM_Person_BO for the maintenance object Person, and use the business object to add user in a more standard way.
    But it is a quite large job to rewrite the whole schema for the maintenance object Person, which has following elements, which are PersonIdentifiers, PersonNames, PersonPhones, PersonCharacteristics, Person and SeasAddress.
    Is there any easy way to do it?
    Thanks,
    Kerr

    Should I have to change the whole XML Schema from attributes to elements one by one?
    Is there any easy way to do it?Unfortunately not, you will have to define the schema containing each field/element, once. The primary objective is that you should create a scaled down version of the BO having only the required fields or subset of available fields, you may not need all the fields of a MO. This increases performance as the IO is performed only for specified fields in the BO.
    You can define separate Data Areas for each Person object's context, i.e. Identifiers, Names, Phones, etc. and include them (includeDA) within the Person BO (CM_Person_BO) for clarity.

  • Creation of Generic business Object for a standard transaction

    Hi,
    We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this audit train we have been asked to use "Generic Business Object" in transaction code ABAA.
    Unfortunately, Generic object services are not available in this transaction code. Can you please suggest me how to create "Generic Business Object" for a particular standard transaction code. Also, we have show the details of custom workflow that follows the approval process in order to depreciate the asset. how to show this workflow details using Generic Business Object. This is a very critical issue, any help will be very help ful.
    Please let me know should you require more information on this topic.
    Thanks,
    Ashish

    this is already answered in the forum, and also explained in the sap library

  • Business object for FB50 or Fv50  transcation

    Hello All,
    When a transaction is processed in T-code FB50 or FV50
    a.     It can be directly posted if the transaction amount is less than 10000
    b.     The document has to be parked, and a workflow has to be created if  the amount exceeds 10000, a workflow has to be created and a mail should be sent to higher level (Manager) for approval . Manager should have the facility to edit the document and post it.
    please let me know the business object for FB50 transcation and any standard workflow template  for my scenario.
    Thanks,
    ram

    Hi JMB,
    i went to FB50 and i have given all necessary detail and when i click the park button or post (save)button workflow  not trigering, i have tested in swel and swels transcation.
    please let me know for my scenario when workflow will start i mean when the park the document or when post the dcoument.
    you have given  5 template but in  my scenario one approver is there ,please let me know which template i can use...
    please guide me..
    Thanks,
    ram

  • Business object for MIGO

    Hi,
    Can any one tell me What is the Busines Object for MIGO
    and  How to find the Business object for a transaction ?
    answers will be rewarded.
    Thanks,

    Hi Rambabu,
    Check the below thread:
    How to find a Business Object
    This will explain how to search business objects for any transaction.
    Regards,
    Nitin.

  • Business object for workflow

    Hi Experts,
    I am facing a proble to create a workflow for service connection .
    The business process is that is a business partner want a electricity connection then if it  is a reconnection then agent shud take the previous dues to the business partner for this i want to open the cash payment screen .
      So, can any body tell me what is the business object to open the cash payment screen .
    Regards,
    Khurram Siddique

    Hi, I don't think you have a business object for the cash desk, you'll have maybe to create you own BOR method to call transaction FPB0.
    Cheers,

  • Business Objects for OM in HR

    Hi Experts,
    I have a small doubt about ABAP-hr OM module. How to find out the business objects for Organization Management (OM) in swo1 T.code.
    and please let me know any procedure and any Objects you have.
    Please help me in this regard...............
    thanks in advance..........
    ravindra....

    Hi,
    Check
    Business Objects :
    ORGASSIGNM: Employee organizational assignment
    ORGMASTER: Control object for org. master data replication
    ORGCHEARM: Designation for organizational reassignment
    ORGUNITEXT: Enhanced Organizational Unit
    PDOTYPE_SH:HR Position
    HRMASTER:Control object for HR master data replication,
    EMPLOYEET:Time specification of employee,
    EMPLOYEEI:Employee Information
    Goto SWO1, in object type, type EMP* and press F4, you will get a list of objects.
    Edited by: Neenu Jose on Nov 5, 2008 7:48 AM
    Edited by: Neenu Jose on Nov 5, 2008 7:49 AM
    Edited by: Neenu Jose on Nov 5, 2008 7:51 AM
    Edited by: Neenu Jose on Nov 5, 2008 7:53 AM
    Edited by: Neenu Jose on Nov 5, 2008 7:55 AM
    Edited by: Neenu Jose on Nov 5, 2008 8:01 AM

  • Urgent - Business Object for Original Budget in Project Systems

    Hi,
      I am working on a workflow for original budget release in Project Systems.The transactions used are CJ30 (Original budget creation) CJ32( Budget release).
      I have to send a workitem fo release the original budget for a user. But I am not able to find out any business object relevant to Budget.
    Can any one helo me in this...????
    Thanx,
    Sivagami.R

    Hi,
    I have tried that option already. But I could not find any.
    Any update????
    Thanx,
    Sivagami.R

  • Business Object for spot/forward transaction - TX01

    Hi All,
      My requriement is to implement workflow for the transaction TX01. I can't able to findout Business Object for this transaction. Has anyone had experiences about  this transaction. Can any one help me on this.
    Thanks - Krish

    Hi,
    Then in T.code SWEC, you can configure for the Event.
    For this you need the BO to configure, Search the BO first in Forum & SAP Help.
    Once BO found, you can trigger the event via CDHDR config.
    Refer this [Link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ddeba4-e780-2b10-7bb2-fc7a33efabbd] for CDHDR config.
    Regards,
    Surjith

  • Business object for Settlement Rules

    Hi Experts,
    Is there any Business Object available in SAP for Settlement Rules ?
    I've identified Change Document Object RKABRV for Settlement Rules but I need respective BO to do the mapping in tcode SWEC.
    Please share.
    Thanks,
    Anirban.

    Hi Naval,
    To find out a BTE for a given tcode you can try this. In a session open SE37 tcode and open the function module BF_FUNCTIONS_FIND. Set a break point at CALL FUNCTION. Then in another session open FB08 tcode. Try creating a entry and save. When you press it will call this function module. Now check for the values in the container I_EVENT. It contains the BTE that can be used for the given tcode.
    Regards,
    Raj

Maybe you are looking for