Any business users depositing checks digitally? What software are you using

I am using my Mac for a small buisness. My bank wants me to digitally deposit checks. My bank tells me the software only works with Windows. Will I have to run dual op sys on my IMAC or is there another way? I am not technically savvy so am leary of loading the Windows operating system to my IMAC. Thanks.

Here's a recent story with links to both:
Mac virtualization vendors prep for Windows 8

Similar Messages

What Camera are you using?

Hi,
What camera are you using for you shot?Let share about the Semi Pro cam together: Fix Lens with manual Focus and Zoom,Affortable Price...

Well, before I got my Digital Rebel XT I dreamed of the Powershot S2 IS. Then the S3 came out...but I was hookoed on my Rebel XT. I hear the S5 is a monster...
Now, my 20D is probably more prosumer. I wouldn't call it a pro camera, although it is legendary for it's use on the sports areana and weddings by pros. For my money, any camera with a pop-up flash and automatic modes is not a pro camera. Having said that, I hope no one starts throwing eggs and tomatoes!
-Scott

What browser are you using with OS 9.x?

Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
Again, what browser are you using with OS 9.x and what are its good/bad points?
Thanks!
Message was edited by: Paul Stamser

(Almost forgot
I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
For the URL string I use (asterisk)yahoo(asterisk)
For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
Cheers,
K.S.
(I use iCab 3.0.5)
Message was edited by: K.S.

What application are you using for student collaboration?

The only part that is missing from iTunes University is real time student collaboration. What application are you using to bridge the gap? Thanks, Ed

Yeah, I'm not sure I know what you mean either.
Q: If you're asking which server-side code to use on Windows IIs Servers?
A: ASP or ASP.net and MSSql. Since Microsoft built these languages, you would get the best support from MS Expression.
If you're asking for software that helps you write code, you'll need to be more specific about which code you want to write and for what purpose.
Nancy O.

What PSU are you using?

K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)

Quote
Mr Woo- I think the question we should all be asking is who is using a high end PSU (30ish 12v amps) and also getting stability problems.
sorry mr woo This thread has been set up by k3nt to acess a specific prob he's having.
Quote
what PSU are you using?
K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)
and
Quote
I might be having to replace my Antec Truepower 480. Apparently its 22A on 12V rail is questionable considering my system? See my specs below in sig.
I feel if the thread was as u suggested would just be a mirror of this one
Worst PSU that works on an A64-system?

What launcher are you using?

What launcher are you using with your Z2?
I'm on Nova Launcher Prime with HERAcon theme and icons.

Apex Launcher

What software do you use for rich media ad development?

I am a flash designer that would like to start developing rich media ads. My my full-time job, I am designing and developing banner ads but they are just normal banners with clickTags and flashing buttons.
I would like to make them more interesting and widget like too, passing data via the database or allowing users to play and interact some how.
How do you think is the best way for me to learn more about rich media adds? Should I try a trial membership with a place like Eyeblaster? I have heard about their plug-in for Flash that allow you to develop rich media. But is that a good system? Do you know others? What is it like. And do you normally just get into rich media ad dev because of clients or is it mainly used by ad agencies? Also, for those who use it at work or on banners, did you recommend / purchase it or was it purchased by your company? Are you a designer or developer? Does it work with AS 2.0 or AS 3.0 or both?
Thx for reading and any replies thanks so much!
Ms.Lee

Most web advertising is still done with AS 2 because usually an on release event handler is required for tracking the clicks.
A lot of rich media ads are produced by agencies. Or if a website sells banner ads, the company usually purchases the software for the in-house designer/developer to use and charges clients more for rich media ads. Companies like Eyeblaster usually charge based on the file size of the rich media ad, so they usually cost more to serve than regular old banner ads (and can take a lot longer to create) which is why they are more expensive for the client. Some clients want more than will fit or look good in a banner in which case rich media can be a good solution.

Regarding Backup of Referenced Masters: What Software do you use?

Hi, I have a portion of my library stored on an external drive via referenced masters. I back up these image files to another external drive. Currently I do this manually - I just copy the folders using the Finder. But I'm interesting in a program that can automatically backup these files incrementally and keep the backup up to date. What does everybody here use? Lacie Silverkeeping? Thanks.

GraemeSmith wrote:
The referenced masters are stored on an external drive, not the internal drive (which is backed up with Time Machine). Is it even possible to use Time Machine on an external drive?
Sure. Time Machine can backup whichever hard drives are plugged in to the machine on which Time Machine is running. This is to be distinguished from drives attached to the network, via Airport Extreme, for example. Time Machine won't get those.
Also the backup drive I want to use for the referenced masters is different that the Time Machine drive.
Gotcha. That obviously rules out Time Machine.

What LMS are you using with UPK?

I have been using UPK for about 2 years. I have been tasked with finding an LMS for our organization. If you are using an LMS, please let me know what you are using, what you like and don't like about it.

Hi
We are using Janison - LMS Vs 7.01
Its a bit clunky and visually not what you call cutting edge.
We have over 2.5k users in 13 different institutes who are all tested on the LMS and we use SCORM 1.2 to score a 80% pass.
No pass - no access.
Wouldnt recommend Janison but it may have been our initial setup of the file structure that is causing a lot of our problems and lack or reporting options.
Cheers
J.

What armband are you using?

Looking for an armband to use that can accomodate receiver. Just wondering what armbands people were using.
I don't really like the nike armband.

Xtreme mac Sport Wrap http://www.xtrememac.com/cases/nano/sportwrap.php
It's comfortable on either wrist or arm & has a screen. (It has two straps in different sizes.)
I cut a small slit with a box cutter in bottom of the sport case to fit Nike+ sensor and put a hole for the earplug cord. The neoprene has not stretched or torn so it holds the Nano firmily in place (despite the slit--which looks like it was meant to be there--not jagged or rough).
I wear this on my wrist so that I can see the dial. No matter how much I perspire, the Nano does not get wet because it is not flat against my wrist. You couldn't pay me to use a screenless arm/wristband.

What DVD to iPod software are you using?

I know this topic has probably been beat to death, but I'm just curious. BTW, I did a search for my questions as well!
I've tried PQ DVD to iPod and Super DVD to iPod and they both have + and - about them. It seems like the PQ software is a little easier to use and you can actually control the DVD where with the Super software you can't. The Super doesn't have the progress bar like the PQ one and I find that very helpfull! Also with the PQ one you can actually control the DVD menu through this software and can crop the DVD. I did find that the Super one had a better picture without changing any settings. That seems like the determing factor for me. I did change some of the setting on the PQ one and it really didn't get any better. If someone could help me with these settings, it would definately make my decision easier. Basically I like the PQ one better if I could only get better resolution. Sometimes it just isn't all that clear as far as the pixels are concerned or maybe I'm just asking for too much with this iPod?
I'm ready to buy some type of DVD to iPod software so what exactly do I have to change to get the resolution better on each software?
Thanks!

No I haven't tried those and I'm sure there are many different ways to go about it. I'm really not interested in trying alot of different softwares, I would just rather find one and stick to it and learn as much as I can about how to use it. I'm going to convert a few more DVD's and see if I have the same problems with the pixels. I currently have two different comedian DVD's installed in my 60gb with the same software, one looks very good and the other is where you can see the pixels in the backround. It may just be the backround on the stage he is on because I don't have that problem with the other DVD. It may also be the DVD I'm sure.

Poll: How many users on your apps and what hardware are you using?

I am curious about the collective experience and performance of others APEX applications and how much "horsepower" your hardware has.
I have a need to support 20-30 users and am using a Windows XP machine with 1.99 Gig of RAM and a 2.8 GHz Pentium 4 CPU.
Any thoughts on this?

For my personal use, I'm renting a Celeron 2.4ghz with 1Gig RAM running CentOS, Oracle XE and Apex 3.2 at a data center 1200 miles away. Seems to work fine. I find the biggest issue is network bandwidth. I originally had a 10Mb link to the datacenter's backbone, now have a 100Mbit. The difference was night and day.
For work (speaking only of our Apex servers), we've got:
One Dell 2way P4 with 4G RAM and 10,000 RPM drives.
It runs 2 10G instances and several Apex apps and it also runs Enterprise Manager Grid Control for 40+ databases. No issues.
Multiple prod/dev/test servers.
All are VIRTUAL running on VMWare ESX3.5. Each database VM has 2 gig of RAM and 2 "CPUs" running 11g/Apex3.2 on Oracle Linux. They all work fine.
I find that a poorly written app can crush just about any hardware you can throw at it. Luckily we don't have any of those ;).
I suspect that your hardware would be fine, particularly if running Linux. I cannot speak to Oracle/Apex on XP. I suspect you might be disappointed, mostly because it is tuned for interactive use rather than background applications (services). Not trying to be a Windows vs Linux troll here, just saying that if you are running a workstation with Oracle/Apex and you on it and expect to support 20-30 other people, you are all likely to be disappointed. Apex/Oracle should be on dedicated server hardware with a server OS.
You also aren't giving us much info on your hardware; 7200RPM IDE/SATA drives aren't going to be as fast as 15KRPM SCSI or SAS, etc.
It wouldn't surprise me if your well written application was able to support 20-30 users with the hardware you are describing (though I won't vouch for the OS).
Google for "apex.oracle.com" and "poweredge 1950" that will take you to this link:
http://joelkallman.blogspot.com/2009/06/who-says-application-express-cant-scale.html
The whole thing apparently serves up 6 million page hits a week with a 1.5Gig SGA. That's a lot of work on a pretty small box.

What software are you guys using to encode the videos on the

Ipod? I'm using windows and right now I'm using the 3gp converter for the psp to put the videos on my ipod. What's other good software what's going to give me the best quality? I don't care how big they are i just want the best quality. Thanks alot!

I found this really grreat application! it "rips" a dvd and converts it to the setting the ipod can read. its called handbrake
here is the site that will guide you through the process(really great website):
http://arstechnica.com/guides/tweaks/ipod-video.ars/4
be prepared to wait a while....it takes a long time! i have an ibook g4 and what i did was start the ripping on a couple of episodes of king of queens and then just closed the ibook and when i woke up in the morning it was done.....even when the ibook went to sleep(idk how..l0l)
but yea try it out if thats what ur tryin to do...it works like a charm...real ez 2!
hope this helps!
btw- the quality is rather impressive 2!!!

What software do you use to design the art for your CD

I used Mixonic on my last project and it came out okay using their online method but I was wondering if Apple had something that would work? , maybe Aperture or Pages would except a CD template?

This is from the DiscMakers FAQs recommended software. I don't think I need photoshop but I guess I need a layout program.
Layout files:
• Adobe Illustrator (versions 8 - CS3)
• Adobe InDesign (version 2 - CS3)
• QuarkXPress (versions 3.3 - 7)
• Macromedia FreeHand (versions 7-11/MX)
• CorelDRAW 8 - X3
Photos or images:
• TIFF (.tif)
• Adobe Photoshop (up to version CS3) (.psd)
• Photoshop EPS (.eps) - with 8-bit TIFF preview
• Windows Bitmaps (.bmp)
• Corel Photo-Paint (.cpt)
• Photo CD (.pcd)
• GIF (.gif) – accepted, but not recommended for print
• JPEG (.jpg) – accepted, but not recommended for print

Is your iOS6 wifi ok? What router are you using?

After trying every possible solution proposed to resolve my wifi connection problems after upgrading to iOS6'the only solution left is to purchase another router. Today an Apple tech support rep told me wifi connection was hardware related only and had nothing to do with iOS6. I don't believe her but it is true that some are claiming they have no wifi connection problems at all after updating to iOS6.
If that is the case please tell me what brand and model router you are using so I can purchase a new one that is compatible with iOS6.
Thanks!

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Any business users depositing checks digitally? What software are you using

Similar Messages

Maybe you are looking for