Any chance for the "away" and "busy" statuses to make it back into Skype for Android?

I recently realized that the new (well new as of early July) Skype for Android is missing the "away" and "busy" statuses (and perhaps some other one as well). I've seen other users around this forum mentioning the same thing, but it's unclear to me whether this was done intentionally or not. Are there any chances for these statuses to be added back? And if not what has been reasoning behind the decision of taking them out? - Adriano

There is another topic, addressing this issue and also explaining it pretty good:http://community.skype.com/t5/Android/Regression-in-4-0-Away-and-Busy-statuses-not-visible/td-p/1729768Unfortunately it doesn’t have much kudos either, even though it is pretty old. The worst about it is, that you aren’t even able to see the real status of your contacts: Contacts who have their status set to “away” are shown as online. Contacts who have it set to “busy” are shown as offline. (Which is even worse…)This simply can’t be intentional. Also.. It's been possible in older skype versions for android, it's also possible on ios.. So where is the need to get rid of the busy/away status in the new android version?

Similar Messages

Any chance for the "away" and "busy" statuses to m...

I recently realized that the new (well new as of early July) Skype for Android is missing the "away" and "busy" statuses (and perhaps some other one as well).
I've seen other users around this forum mentioning the same thing, but it's unclear to me whether this was done intentionally or not. Are there any chances for these statuses to be added back? And if not what has been reasoning behind the decision of taking them out?
- Adriano

There is another topic, addressing this issue and also explaining it pretty good:
http://community.skype.com/t5/Android/Regression-in-4-0-Away-and-Busy-statuses-not-visible/td-p/1729...
Unfortunately it doesn’t have much kudos either, even though it is pretty old.
The worst about it is, that you aren’t even able to see the real status of your contacts:
Contacts who have their status set to “away” are shown as online.
Contacts who have it set to “busy” are shown as offline. (Which is even worse…)
This simply can’t be intentional.
Also.. It's been possible in older skype versions for android, it's also possible on ios.. So where is the need to get rid of the busy/away status in the new android version?

I hit something and the size of the screen shrunk, so everything is too small for the page. How can I make it back to regular size?

I don't know how, but the size of Facebook is much smaller than it should be. Like around the edges of the page, there is about an inch of just white, and all of the writing is really small. Is there a way to make it back to regular size? I can't really read anything because it is too small.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to adjust the default font size and page zoom on web pages:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

Firefox isn't always compatible with logging onto my comcast email account. I have to clear the cache and then I'm able to back into my email account. Is there a way to permanently resolve this problem? Thanks.

Firefox isn't always compatible with logging onto my comcast email account. I have to clear the cache and then I'm able to get back into my email account. Is there a way to permanently resolve this problem? Thanks.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.com/kb/Cannot+log+in+to+websites

Info for command and busy status

Can anyone provide me with info on the busy status property returned by the info for command?
Under OS 9, I used that to determine if files were busy before attempting to process them.
Now, under OS X, it doesn't seem to be functional, the files are processed even if they really are busy, and the fider throws a message back at me saying so.
Basic scenario (repeated with any PostScript files found in folder):
set busyStatus to busy status of (info for epsFile as alias)
if busyStatus is false then
try
<distill file>
on error
return 10
end try
end if
if exists epsFile then
set busyStatus to busy status of (info for epsFile as alias)
if busyStatus is false then
try
delete epsFile
on error
return 10
end try
end if
end if
The folder being watched is a folder that graphic artists are writing PS files to directly from InDesign.
If the script runs and a PS file is in the process of being written, it still attempts to distill it, and it still attempts to delete it, and the result is a finder error.
I had assumed that the busy status would solve my problem, but it doesn't ever appear to return a true value.
I had also assumed that the try-on error block would catch the finder error and prevent it from displaying the dialog box, but it doesn't appear to.
I have found a few references to the fact that busy status isn't reliable, and may not work at all under OS X. Anyone have any ideas?

We used to use the watched folder feature of Acrobat. We just upgraded our process from OS 9/Acrobat 4 to OS X/Acrobat 7. What Adobe fails to tell you, is that the Standard version of Acrobat doesn't have watched folders. That is now only a feature of the Pro version.
I thought I could avoid paying $150 a copy to upgrade from Standard to Pro, just for that one feature.
I have previously used Applescript to create watched folders for a variety of automation tasks, and never had a problem. Because I have a lot of Applescript processes in place already that rely on being able to determine if a file is busy, I need to figure out how to do it with OS X.

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

My iPad screen is blank except for the service and battery symbol. Any ideas how I can fix this?

My Ipad screen is blank except for the service and battery symbols. Any ideas how I can fix this please?

Try restarting
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
RobinD_VZW
Follow us on twitter @VZWSupport

TS3367 My partner has the Iphone 5 and I am using a MacBook with version 1.0.2. When using the face time app to call him he says that cam freezes and he is unable to hear me. Any ideas of the problem and and ideas for resolving the issue?

My partner has the Iphone 5 and I am using a MacBook with version 1.0.2. When using the face time app to call him he says that cam freezes and he is unable to hear me. Any ideas of the problem and and ideas for resolving the issue?

Had the same problem, the only fault and the reason why it happend is a bad wifi connection!
Could ofc be something else, but thats my two cents!

I want to download pictures from a Sony Memory Stick Pro Duo to my iPad 4. There is no cord for the camera and the USB dongle requires too much power through the camera connector kit. Any good solutions?

I want to download pictures to my iPad 4 from a memory stick pro duo. There are no cord connections for the camera and the USB dongle requires too much power through the camera connection kit. Any good solutions?

Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

So i have a white iphone and cracked the screen back in July. They had no more white screens in stock so they put on a black screen. would that by any chance avoid the warrenty

So i have a white iphone and cracked the screen back in July. They had no more white screens in stock so they put on a black screen. would that by any chance avoid the warrenty

Who put a screen on it?
I would say the warranty is void.

Any chance for the "away" and "busy" statuses to make it back into Skype for Android?

Similar Messages

Maybe you are looking for