Any chance of a *CD* release?

I have an IBM E-server x342 that I would like to install the x86 version of Solaris Express Developer Ed. on, but it doesn't seem to to be able to boot from a DVDROM I set up temporarily to install. I'd really like to get Solaris on this machine for some testing since it's got 2 GB of RAM and 6x 18.2 GB SCSI drives. Any possibility of a CD based release to overcome this little obstacle? Thanks!
Dave Land
Land Computer Service

Please ignore. Just now found the CD version. :-p Time for new glasses I guess, LOL!

Similar Messages

  • Any chance of a TP4 release before the production version?

    I would be great if one was released becase this is such a major upgrade of the product..

    Hi,
    TP3 too had a patched OC4J to provide the update. However, it was lacking a stand alone version. What we can promise is that the TP4 will have a newer OC4J, if it is a complete upgrade to a new version I don't think we can promise yet
    Frank

  • Crappy BIOS on MSI 945P boards? Any chance getting better?

    Hi all, I've already wrote it on different place but I'd like to know an answer, that's why I write it to a new thread.
      I've got two MSI mainboards, both with the same chipset Intel 945P, just the bios differs; one AWARD the other AMIBIOS. Neverthless, both of them are experiencing similar problems in overclocking the CPU.
      (1) MSI 945P Neo2-F and Intel P4 630 (Prescott, single core). My BIOS behaves "randomly" after changing the FSB. Other components offer a good reserve of performance and I am sure the CPU too. When increasing the FSB value for more than 15MHz, on reboot the system hangs and the original (200MHz) value is restored. If the FSB exceeds some 224MHz it always hangs and restores 200MHz. That mobo has an AMI Bios. No update seems to be available, as the MSI Live Update doesn't work (the server is probably down).
      Even worse it is with a (2) MSI 945P Neo and the same CPU, with an Award Bios. The overclocking is also impossible. When the FSB value changed by just 1-2MHz, the system hangs on reboot and even though the manual claims that after 4 unsuccesfull attempts to boot it will restore defaults it won't. The only way is to open the case and remove the jumper to clear CMOS.
       Though there's a possibility to overclock - through MSI Core center. Surprisingly, the same version of MSI CC offers different possibilities for each of the motherboards. (1) is overclockable just like 1%,3% .. 11% while for (2) it offers to change FSB by MHz and without limits.
      That piece of software is crappy enough though and it is practically unusable, because on system reboot or power down it randomily (again) restores the original 200MHz FSB value.
      I managed to oveclock P4 630 up to 4GHz without any problem by using MSI CC on (2) but annoyed by the issue described above, I decided not to use that kind of software.
      According to other places on web, there are more guys around having the same troubles like me with 945P BIOSes, mainly what concerns OC. Here is my question: is there any chance that MSI will release a BIOS fixing this bug? Is there someone responsible for this so that I can report him the problems and he'll put some efforts in solving that issue or working on a new BIOS?
       Thank you all who can help!

    Quote from: kuni on 30-August-06, 16:19:09
    Made some progress in understanding the problem.. I tried all possible BIOses, the FSB-PCIE sync/async didn't show in any of them except the oldest one. (it's a 1.0D BIOS version). When trying to OC with that BIOS, the same problems arose..PC locked up and even clear CMOS didn't help. So I went to our PC custommer service for a help. They changed CPU for a celeron and surprisingly, the PC worked like a charm, even FSB-PCIE sync/async appeared and I am sure there wouldn't be any problems with OC. Then they tried a different p4 630 and the problems were back. So it's obvious that the 945 based mobos from MSI don't deal with some CPUs correctly. I've already sent this to MSI but don't expect a fix for this.. luckily they gave me an ASUS for the same money instead and hope the problems aren't that of intel chipset as a whole but just that of MSI boards.. regards, Kuni.
      P.S. if your mobo is still under warranty and wanna try to "hoax" your PC dealers for getting a new mobo like me, I can provide the old BIOS or just demand the MSI custommer service for w7176ims.10D
    ok, i have checked the 1.5 BIOS from the link that kuni posted and CPU FSB & PCI-E is indeed hidden, but is set from default to async. all in all the features that are hidden in the 1.5 BIOS are already set at the best settings, so i don't see this as being a problem.

  • Soooo, any chance of you guys EVER bringing back trade-in promos on games again?

    It seems like forever since you guys did an actual trade-in promo on games and when you did it was the lowest amount possible(30%). Any chance we'll actually see the good trade promos make a comeback or are game trade-ins pretty much done and buried at this point(as is evidenced by the laughable disc only and pretty barren pre-owned sections at my closest store)?
    While we're at it, how about a return to halfway decent trade in values to go with any promotions? :-P Not that I'm not excited beyond belief at getting $2 for (insert semi recent game name here) plus my extra $.20 for being a GCU member.

    Hey CheapestGamer,
    While we generally can’t speak to any upcoming promotions or anything like that, I can certainly say that I agree with you here. I usually wait until a solid trade-in promotion to trade my games in and I can understand where you’re coming from in regards to that bonus only being 30% recently. It's definitely better than nothing, though!
    With that said, this fall is going to be insanely busy with all of the upcoming gaming releases, so I’m pretty confident we’ll be running some trade-in promotions to coincide with said releases. Here’s to hoping for a 50% bonus, or even higher!
    Cheers,
     

  • Sharepoint Foundation 2013 on Windows Server 2012 R2 Essential - any chance to install?

    Understood that it's impossible to install SharePoint as it is not supported on a domain Controller BUT is there any chance to install instead SharePoint Foundation 2013 on a Essential Server?

    Hi: 
    Seems so, although as you know it would be better on a member server as a VM.
    http://www.em-soft.si/myblog/elvis/?p=305
    Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

  • Any chance I can use PC3200 (ECC) from my PC in my iMac?

    I write 'my iMac' with faith, as I don't have one yet, but I'm getting closer and closer to pulling the trigger (and selling my powerbook to finance it). You see, I'm basically poor. I've got an open tab in this very browser for a 2gb kit of Corsair Value Select ($217). I've also considered a single gig stick (bringing me up to an unmatched 1.5gb). Then I had a crazy notion:
    "My PC, which I hardly use any more due to the gruesome inferiority of XP to OS X, has 2x512mb PC3200 sticks in it... XP doesn't know what to do with anything more than 512!"
    They are both ECC sticks, but my understanding is that ECC can work in non-ECC setups, but not vice versa. If you mobo requires ECC, you need ECC, but the ECC functionality can be not used and it'll work like non-ecc memory. Sorry if that wasn't clear, but I'm pretty sure my current mobo doesn't acknowledge or use ECC, yet my ECC ram is running fine. ECC stands for Error Correcting SOMETHING, btw. Servers often use it, runs a bit slower but more stably than non-ECC. Anyway, I've got two chips, a samsung and a crucial chip, and I'm hoping that IF they'll work at all, that one of them would 'match' whatever 512 chip Apple sends stock. Then I can get by with the iMac running on 1gb.
    Am I a crazy cheap-skate? The other thing I considered slyly was 'Why not buy that 2gb kit and stick the spare 512 in the PC - then I can run BitTorrent, Google Earth AND a game at the same time on 1.5gb and stave off upgrading to an Intel iMac for another 6 months (ie. 2008?) because I also have 2gb in my iMac.'
    Thanks for your input.
    Alex
    p.s. if anyone knows if the spanning hack has any chance to output to DVI, please let me know - or look at my other post - thanks.

    Alex,
    Apple says:
    "Important: DIMMs with any of the following features are not supported in the computer: registers or buffers, PLLs, ECC, parity, or EDO RAM."
    However, my understanding of the language "not supported" is that they might work, anyway, but if something goes wrong it's not Apple's fault.
    With as many iMacs as are in use, there must be someone else who has tried ECC chips, if they are willing to own up to it:-)

  • My new Ipod touch 5 32GB is stolen is there any chance to be find if i don't have iFind

    My new Ipod touch 5 32GB is stolen is there any chance to be find if i don't have iFind....is it possible that people from apple can trace ipod useing serial No. or something.

    Sorry... No.
    What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/HT5668

  • Just bought a new iphone 5 i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac aga data 0

    Just bought a new iphone 5, i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac again?)

    You an use your iPhone without connecting it to a computer.
    But the product description for the iPhone clearly states that in order to sync with a Mac you must have OSX 10.6.8 or later. That version of the OSX is usually called Snow Leopard. There are two mo recent versions of OSX. OSX 10.7.x (Lion) and OSX 10.8.x (Mountain Lion).
    If you can upgrade your computer to at least Snow Leopard I suggest you do so.

  • Another iPod locking up -- any chance of service from Apple?

    Yesterday, it froze in the middle of a song at 5:21 (according to the clock display) and never came unfrozen. The battery died, I plugged it in when I got home, it charged overnight, and I was listening to a song today and it froze again. The advice of resetting it hasn't helped. When it's frozen, I tried four or five times to reset it, and it just won't do anything. It even stays lit up the whole time! When I first got my iPod, it could take literally hours for iTunes to recognize it in the source list, even though the computer knew it was there. I don't think that's related, but oh, well. And of course, a fourth-gen isn't really covered anymore in their service policy. I got it in Sept of 05, and already used my one free call. I haven't yet been able to get through to an actual person, but I'm planning on it.
    So, two questions:
    1) any clue what the problem with these iPods is?
    2) Any chance the people at Apple would be willing to replace it with a working, SERVICEABLE model?

    And of course, a fourth-gen isn't really covered anymore in their service policy.
    The warranty is for one year after purchase.
    If you bought it new in Sep 05, its still covered.
    already used my one free call. I haven't yet been able to get through to an actual person, but I'm planning on it.
    If you have not spoken with an actual person, you have not used your one free support.
    But that is only good for the first 90 days anyway. After 90 days, it'll cost.
    Try the 5Rs on this page.
    http://www.apple.com/support/ipod/
    If this does not solve the problems, you can request service for your iPod at an Apple Retail store or here.
    http://depot.info.apple.com/ipod/

  • In the process of saving a file a power surge rebooted computer. Any chance of recovering file?

    In the process of saving a file a power surge rebooted computer. Any chance of recovering file?

    Have a look at the sample script below. The "while" loop waits for the specified number of milliseconds, then reads the contents of a directory and processes every individual file in the directory. In my example, it just prints the file path to the console. You would replace this part with your Open / Save as / Move sequence.
    For more file system commands, refer to Adobe's Javascript Tools Guide, "File object functions".
    var stop = false;
    while( stop==false ) {
        // Wait for 20.000 ms
        $.sleep(20000);
        var fld = new Folder("c:/incoming");
        var filesInFld = fld.getFiles("*.fm");
        for(var f=0; f < filesInFld.length; f++) {
            // process the individual file
            $.writeln(filesInFld[f]);
        // Exit the  loop after 19:00
        var time = new Date();
        if( time.getHours() > 19 ) stop = true;

  • Adobe Creative Suite 5 Web Premium Student and Teacher - Is there any chance to get a CC discount?

    Hi there.
    I'm currently a user of Adobe Creative Suite 5 Web Premium which I bought when I was eligible for Student&Teacher version. I'm not a student, neither a teacher anymore. Is there any chance to get a discount for Creative Cloud?
    I thought I would be able to get a discount due to the fact I have previous version of Adobe software, but it seems that it is not for people who bought S&T versions.

    Hi,
    first of all look at your "Help" on top, where you could go to this:
    http://www.adobe.com/ap/support/contact/ ("Need a different country or region?" = Asia Pacific - English) or
    http://www.adobe.com/support/service/
    Also what concerns the service from ADOBE support I personally made very good experiences with the telephone hotline.
    All other product help
    800-833-6687
    Monday-Friday, 5am-7pm PST
    And particularly well I found that Adobe now also offers the chat. All I can give you this link:
    http://kb2.adobe.com/cps/403/kb403784.html#Free Support
    To 1.: Did you read Adobe's terms and conditions? If so, the question should answer itself. Student version prohibit commercial work, I could read it in a former thread, an academic version would allow it and come with full upgrade rights. (You could use search function here on top.)
    To 2.: Since I have no experience, I would even here use Adobe's or Google's search function.
    To 3. Yes.
    Hans-G.

  • Any chance the Mac mini and the Apple TV will be combined into one unit?

    Any chance the Mac mini and the Apple TV will be combined into one unit?

    No.
    The Apple TV is the guts of an iPad without the screen or battery running a different build of the OS. Ie, its very cheap to make and runs an ARM processor (like all iDevices)
    The Mac mini is 6x the price and is a full intel computer running the OS X.
    Now, it could be that the Apple TV gets more powerful and its OS more diverse and "computer like" (apps + iCloud for example), but for now they're still coming from totally different directions.
    They just happen to look alike

  • I constantly get Error 7 (windows error 5) message.  I have installed and uninstalled repeatedly.  Any chance of getting Itunes on Windows 8.1?

    I had the older version of ITunes and then it disappeared.  When I try to install the new version, I keep getting "unable to install ITunes, Error 7 (windows error 5) message.  I have repeatedly installed and uninstalled iTunes without luck.  Any chance of actually getting this on Windows 8.1 or not?  I am assuming I also lost my library during this.

    Hey there Stardust37,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that can help you resolve the iTunes installation issue alert message that you’re seeing on your PC.
    iTunes for Windows: "Error 7" message when opening iTunes - Apple Support
    Cheers,
    -Jason

  • For printer LaserJet Profession​al CM1410 any chance to set printing password for windows and MAC

    Dear All
    for printer  LaserJet Professional CM1410 any chance to set printing password for windows and MAC?please help?

    What Windows OS are you using?  Are you networked?
    If you are networked, you have to setup your file and print sharing options in order to require password assess.  If you are just trying to control specific files from being printed, you can do that, too.
    If you are just trying to control the amount of printing off of a single PC with a printer, you could setup different accounts for each user and limit their access. 
    Some of the commercial printers can have password options, but I do not find any password options for the CM 1410, other than what I provided earlier.
    If I have been helpful, a Kudo is always appreciated.

  • I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.

    I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.
    I did not use ICloud or any storage and did not make any sync before.
    Is there any Trash Can in Iphone in order to find them? I am dumb and I did not think about save them before connect to PC.

    Your photos are gone.  They were wiped when you restored your phone.  There is no "trash can".
    You obviously don't understand how to use the iPhone properly.  Attached is a link to the iPhone User guide.  I suggest you read through it to avoid data loss in the future.
    Best,
    GDG
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Maybe you are looking for

  • Two ipod's on one computer

    hi! i have a problem, me and my sister have two I-pods but we have only one computer. we can't use the Itunes becuase it dosen't read the other i-pod. how can we use the Itunes with both Ipods? and how can we make 2 playlists? thanks very much!!!!!

  • Reader appears inline in browser although preferred otherwise

    Since I have upgrade to Reader 10, PDF files open inside my Firefox and Chrome browsers. This is in spite of the fact that in Preferences/Interenet I unchecked "display PDF in browser. In IE8 it is OK, i.e. opens in the application. OS is Vista. How

  • Built-in dictionary not showing

    Hey all , how are you ? The built-in dictionary not working !! It was working before but i don't know what happend ! I formated my iphone and then restored it from itune and when i went to notes and highlighted a word and clicked on define , it told

  • PackageMaker localization problem

    Hi, I am creating .pkg for my application using PackageMaker. I am providing support for 7 langauage English, French, German, Italian, Korean, Russian,Spanish. In Edit Interface, i am using abbrevation : en, fr, de, it, ko, ru and es fro these langau

  • Where in the MIDlet life-cycle should I create multiple forms with LWUIT ?

    Hi all, I must create two LWUIT forms in my application. Where should I create the two forms ? I created the first form in the startApp life-cycle method , and when I tried to create also the second form in the startApp method then there is a NullPoi