Any chance that we can select full resolution for photostream on ipad?

i would really like to use the New iPad as a primary photo editing solution. i have Snapseed and various other editing apps on the iPad but i just discovered that the Photo Stream copies of the photos on the iPad are down-sampled (which seems odd given the new retina display, etc.. of the new iPad). i'm sure this is done for space/connectivity reasons but it sure would be nice to have a full resolution option in the Photo Stream setup options. any chance that Apple is considering changing this? are others seeing the same issue?

Welcome to the Apple Community.
This is a user to user community, Apple are unlikely to read your comments, if you have any suggestions that you think might enhance iCloud you can send Apple your feedback here.

Similar Messages

HT204387 Is there any chance that I can swap my ipad2 to ipad air?then how much will it cost?

Is there any chance that I can swap my ipad2 to ipad air? How much will it cost?

Denec wrote:
Is there any chance that I can swap my ipad2 to ipad air?
No.
How much will it cost?
Full price.
You can "recycle" it thru Apple and get an Apple store gift card you can use towards a new iPad.
See this -> http://store.apple.com/us/browse/reuse_and_recycle

I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.

I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.
I did not use ICloud or any storage and did not make any sync before.
Is there any Trash Can in Iphone in order to find them? I am dumb and I did not think about save them before connect to PC.

Your photos are gone. They were wiped when you restored your phone. There is no "trash can".
You obviously don't understand how to use the iPhone properly. Attached is a link to the iPhone User guide. I suggest you read through it to avoid data loss in the future.
Best,
GDG
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Is there any chance that I can get a video chat

Is there any chance that I can get a video chat (like I recorded) that I had a few days ago? It is very important for me, please reply me back if you know something, thanks

This is the only Moto phone when it comes out that can be used on Verizon Prepaid..
http://www.droid-life.com/2013/11/13/moto-g-is-coming-to-verizon-prepaid-in-q1-2014/

My iphone 4s power button is stuck. Is there any chance that it can be fix?

My iphone 4s power button is stuck. is there any chance that it can be fix?

This will be covered for free under Apple Warranty. Until you do this, a software workaround is a Virtual Lock Button in Assistive Touch on iPhone. Tap Settings App>General>Accessibility>Assitive Touch>ON>Tap new Virtual White Screen Button>tap Device> tap Lock Screen. If you hold down on the Lock Screen Icon it will give you the "slide to power off". To turn iPhone ON, connect to Power Source with USB Cable, via Charger or Computer USB Port.

HT5621 yesterday somebody logged in to my apple account and changed my address, is there any chance that I can find out ip address or location of who did this ???

Hi Guys,
I am a bit worried as yesterday I received an email saying my account details changed and that was for my billing address. I havent done this and so amazed, have a doubt on someone who is probably not in the country at the moment. just want to confirm if there is any way that i can trace the ip address or location that from where its been changed. (I have changed everything after this though but still feeling insecure)
Please advise
Many Thanks,
Ummara

Ummara wrote:
I am a bit worried as yesterday I received an email saying my account details changed and that was for my billing address. I havent done this ...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT1689 i made a factory reset and lost all my data.. i have never synced my ipad to any pc or have never made any backup in anyway... is there any chance that i can get my photos and videos back....

my small sisters attempted to open my ipad several times and it got disabled.... i have never synced my ipad with any pc nor i have never made any backup in anyway.... i thought i could recover it after resetting... i made a factory reset through itunes and all my data was lost...... is there any way to recover my photos and videos back.....

- If you used PhotoStream then try getting photos only from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? by stephenftlaud

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
(2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
Thanks
Sam

TidyCup
What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
or
with your mouse cursor draw a rectangle around the clips that you want to select
2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
Are you asking about photos with landscape or portrait orientation?
The pan and zoom tool does one photo at a time.
Have you read the Adobe documentation on the Pan and Zoom Tool?
http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
Please review and clarify and then we can get into greater details on this.
Thanks.
ATR

How to add a checkbox to dynamic itab so that i can select some records

How to add a checkbox to dynamic itab so that i can select some records in the alv and can display them in another alv using a button
I have requirement where i have to display the dynamic itab records in an alv ....Some records from this alv output has to be selected through checkbox provided in the first column .( I will get to know the structure of the itab only at runtime ,so iam using dynamic itab)

Hi,
   I tried and finally i got it , Just try for it.
type-pools : slis.
PARAMETERS : p_tab type dd02l-tabname.
data : ref_tabletype type REF TO cl_abap_tabledescr,
       ref_rowtype TYPE REF TO cl_abap_structdescr.
field-symbols : <lt_table> type   standard TABLE ,
       <fwa> type any,
       <field> type abap_compdescr.
data : lt_fcat type lvc_t_fcat,
       ls_fcat type lvc_s_fcat,
       lt_fldcat type SLIS_T_FIELDCAT_ALV,
       ls_fldcat like line of lt_fldcat.
data : ref_data type REF TO data,
        ref_wa type ref to data.
ref_rowtype ?= cl_abap_typedescr=>DESCRIBE_BY_name( p_name = p_tab ).
TRY.
CALL METHOD cl_abap_tabledescr=>create
EXPORTING
    p_line_type = ref_rowtype
receiving
    p_result     = ref_tabletype.
CATCH cx_sy_table_creation .
write : / 'Object Not Found'.
ENDTRY.
*creating object.
create data ref_data type handle ref_tabletype.
create data ref_wa type handle ref_rowtype.
*value assignment.
ASSIGN ref_data->* to <lt_table>.
assign ref_wa->* to <fwa>.
loop at ref_rowtype->components ASSIGNING <field>.
ls_fcat-fieldname = <field>-name.
ls_fcat-ref_table = p_tab.
append ls_fcat to lt_fcat.
if lt_fldcat[] is INITIAL.
    ls_fldcat-fieldname = 'CHECKBOX'.
    ls_fldcat-checkbox = 'X'.
    ls_fldcat-edit = 'X'.
    ls_fldcat-seltext_m = 'Checkbox'.
    append ls_fldcat to lt_fldcat.
endif.
clear ls_fldcat.
ls_fldcat-fieldname = <field>-name.
ls_fldcat-ref_tabname = p_tab.
append ls_fldcat to lt_fldcat.
endloop.
loop at lt_fldcat into ls_fldcat.
if sy-tabix = 1.
    ls_fldcat-checkbox = 'X'.
    ls_fldcat-edit = 'X'.
modify lt_fldcat FROM ls_fldcat
    TRANSPORTING checkbox edit.
endif.
endloop.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog           = lt_fcat[]
IMPORTING
    ep_table                  = ref_data.
assign ref_data->* to <lt_table>.
select * FROM (p_tab) into table <lt_table>.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   IT_FIELDCAT                       = lt_fldcat[]
TABLES
    t_outtab                          = <lt_table>.
Thanks & Regards,
Raghunadh .K

Is there any chance that FM reception gets made available on the next iPhone model?

Hi,
I did buy an iPhone 3G then upgraded iPhone 4 but always felt that Apple's devices missed a very useful function (and hoped that it would eventually be made available), FM reception! Now I have that cool iPhone and yet I have to have my iPhone to listen to my MP3s and a FM radio to be able to listen to the gym FM broadcasting or listen to my favorite FM station which doesn't broadcast on the internet! And I definitely don't see myself forking away a hundred on an iPod Nano just because of its FM receiver!!!
Is there a hardware limitation preventing iPhone 4 from receiving FM broadcasting?
Is there any chance that FM reception gets made available on the next iPhone model?
Please give your iPhone customer FM reception!!! PLEASE!!!!!!

We're all just fellow users here and have no idea what Apple might have in mind for future iPhone versions. You can offer your suggestion to Apple via their feedback page, if you wish:
http://www.apple.com/feedback/iphone.html
Regards.

Is there any chance that Tab Grouping feature (like the one in Opera 11) will become native for Firefox? Could be very helpful.

Is there any chance that Tab Grouping feature (similar to Opera 11) will appear in Firefox? Could be very helpful and convenient.

Hi ThaPlaya,
I feel your pain. I am in charge of over 250 PCs and laptops. Flash Player stopped working for me after an update. I have been working on this issue non-stop since the middle of October, 2012. It's time-consuming, and even after applying the latest Flash update, it still doesn't work properly.
I am beyond frustrated! I have people calling me left and right saying that they can't access content. I have been using this site https://www.mozilla.org/en-US/plugincheck/ to try and do a browser plug-in check while in IE an dFirefox. Even after I update all plug-ins, Flash still works about half the time.
For instance, the principal of the middle and high school wanted to view an online magazine http://upfront.scholastic.com/issues/12_10_12, about 3 pages load on this site. The rest continue to say LOADING. When I right-click on a page and then left-click on ABOUT ADOBE 11.5.502.110, it seems I am using the most up-to-date version for IE and Firefox.
Students are trying to access sumdog.com and stmath.com, both run using Flash. STMath is now working a bit better because I allowed some exceptions in our internet content filtering appliance, and in our firewall, sumdog still works half the time.
If Adobe is going to update their browser plug-ins, they need to test and retest before giving the public access. This situation is causing me a ton of problems!
Sorry to infiltrate your post...
Dawn/Flower1964

I backed up my phone before i went on vacation. I dropped my phone in a pool and now it doesn't work, is there any way that i can get the pictures that I took on vacation off of the phone?

I backed up my phone before i went on vacation. I dropped my phone in a pool and now it doesn't work, is there any way that i can get the pictures that I took on vacation off of the phone?

IF you had icloud backups and Camera Roll turned on in Settings on the wet phone, then you can restore that backup to an iOS device, but not a computer.
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Once you get a replacement phone...
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
This link gives another overview of backup and restore:
http://support.apple.com/kb/HT4859?viewlocale=en_US&locale=en_US

Any chance that Aperture 3 soon will support the RAW format files from Leica V-lux 3?

Any chance that Aperture 3 soon will support the RAW format files from Leica V-lux 3?

Were all just users here no Apple employees so no one can say (and if Apple was here they wouldn't say either)'
It's just not the type of information Apple gives out. You can go to Aperture->Provide Aperture Feedback to let them know you want his camera included. But when that will happen is anyone's guess.
One strategy you can use for the time being is to shoot RAW + JPG (assuming the camera has this mode) and import both as a RAW+JPG pair making the JPG the master. Then when the RAW support comes out you can switch and make the RAW the master and process the file.
There are other ways to deal with this until the camera is supported. Post back for more info.
regards

Any chance that we can select full resolution for photostream on ipad?

Similar Messages

Maybe you are looking for