Any change in the record path function in 8.02?

Can you actually name the record path in 8.02 like we could in 7? Or is it still the same auto-name from track name nonsense that we have in 8.01? I saw no mention of it in the list from apple, but was hoping maybe they just left it off the list. I had to search for a misplaced file today and had to try to sort out 64 audiofiles that were called "Vince Ld Vx" from four different songs. I eventually was able to match the creation times with the hours I worked on the right song, but what a nightmare!

Nope. They have not fixed it.
I'm not sure they realize they need to fix it. But it's drivin me nuts the same way it apparently bothers you. Such a simple function, I can't believe they messed it up.
Please - if any others out there are annoyed by the fact that file naming is so poorly implemented in L8, - leave more feedback for Apple. MAYBE they'll listen next time around...
At the very least, it'd be nice if it worked like Final Cut Pro, which allows you to set a prefix for new files, so you can identify which project/song all your "lead guitar" tracks belong to.
Grr.

Similar Messages

Only query on existing form without any changes on the existing records?

Dear all,
I am working a brand new form. The form is able to query all the records from the table. However, when I leave the form, it will ask me "Do you want to save the changes you have made?" everytime. I didn't make any changes on the existing records.
My form only has 2 fields (one with LOV and one without).
Does anyone know what went wrong?
Thanks.

How do you populate your datablock? Do you query one of your values in a Post-Query trigger?
However you are populating your datablock, Forms is detecting that the status of the Form, Block or Record is changing.
Also, please let us know your Forms version.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?

Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?

No, I'm afraid not. However, you can drop a clip from in to out into the timeline and the hit CMD+R and grab the end, changing the length of the clip to fit in the space that you need by speeding up the clip.
Hope that helps.
Andy

Any changes in the condition value then system should trigger a mail.

Hello Experts,
I have below requirement
If user does any changes (increase the price /decrease the price) in the condition value then system should trigger a mail and goes for approval.
How i can achieve this ?
Thanks

Hi
In that case again you can use MV45AFZZ program and USEREXIT_PRICING_PREPARE_TKOMP. If this exit didnt work you can try in other save or prepare to save exits in this same program. For order statuses and authorization you can use status profile and control authorization through an authorization object. For email use email sending function and users will receive an email whenever some specific condition value is changed.
This will be ABAP coding in above mentioned program using implicit enhancement. There is no standard solution for this and you have to go for customization.
Thank$

Why should I recompile report for any changes in the database ?

Hi All
I call a report (.rep) from a form using RUN_REPORT_OBJECT, and everything is OK
For any change in the database, for example :
1- Export Dump file for the schema.
2- Drop the schema
3- Re-create the schema again
4-Import the taken dump to the schema
When i call the report again, the report doesn't run. If i recompile the report again it will work.
I read too much posts about this issue, most of them are taLking about the command line parameter RECURSIVE_LOAD=NO ,
v_url :=' COMPANY_NO='||:global.company_no|| ' RECURSIVE_LOAD=NO';
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,v_url);
But , Still the problem not solved
Notes :
1- The report type is .REP
2- if I used the .JSP report, it is working fine , But i can't copy the source code for the report at the customer side.
Please Help

Well, first of all this would not be the correct forum. There is a dedicated reports forum for reports related questions. And secondly this most certainly depends on your report. If you have a query like
select * from my_tableor e.g. are using %rowtype records in your report then you most certainly will have to recompile it after you do an exp/imp.
cheers

Reset Release Strategy for any change in the Purchase Order

Hi,
Is it possible in SAP standards to reset release strategy for even minor changes in the Purchase Order irrespective of whether it is value change or any change in the text or Purchasing group change or whatever it is?
If so, where do we need to make the configurations.
I have seen in some thread about resetting the release strategy for decrease in Purchase Order value.Even that was possible through some BAPI.
Thanks in Advance.
S.Raghavan

hi sandesh,
sorry, i know it's too late.
i tried your suggestion, it works blocking the purchase order after release strategies are setted.
sandesh, raghavan:
i need to reset the strategies after to make any change in the po. i'll appreciate your help if you can give it.
regards
f

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
Thanks in advance.

1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
2. No; if you use an emulator, it may install system components. Back it up anyway.
(110033)

Problems setting the recording path

I have recorded hundreds of songs successfully by setting the recording path to the project folders on my external hard drive. Now whenever I open a new project and go to record an audio file it ask me every time to set the recording path. I pick the location on my external, click save and then hit the record button and then the whole process starts all over.

does your drive has a Sleep mode (or something like that) preference?that's after a certain time of inactivity...goes to sleep
Might be that..
A

HT6058 Is there any change in the MODERN FIRMWARE??

Is there any change in the MODERN FIRMWARE with the new ios update of 7.0.4?

The entire point of an update is to make changes in the current firmware.
So, yes there are changes. That is what an update is.

Unable to see any changes after the preview download

Hi Team,
I have registered as developer and downloaded the preview today. But i cant see any changes in the features. Am i missing something here ?
Regards,
Santosh

We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here:
http://answers.microsoft.com/en-us/winphone/forum/wp8
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. WHat do you suggest.

Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. What do you suggest.
I am using Mozilla Beta 4. I volunteered to try it out. It's lightning fast. I really love using it. I see there is a new version of Firefox should I download it??

I HAVE NOW SOLVED THE PROBLEM BY RUNNING WINDOWS REGISTRY REPAIR TOOL WHICH HAS OBVIOUSLY REPAIRED CORRUPT REGISTRY FILES.

My photos are not showing up as layers in the layers panel, only as one layer, so I can't make any changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong?

My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.

barba87623950 a écrit:
My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.
Photos from cameras or scans have only one layer (the 'background' layer).
You can start with that 'background' layer and duplicate it or add other layers in the editing process. For instance you can make a selection of a subject and put it on another layer; a common use is to desaturate the 'background' and to keep the color in the selected subject in your newly created layer.

Is there any changes in the DIAdem script between DIAdem 9.x and DIAdem 10.x ?

Hello,
I have got a question about DIAdem Script.
I saw the compatibility problem described in KB.
'Why do my DIAdem 9.1 Scripts not work in DIAdem 10?'
Many problems were solved, but some case were not.
So I guess there is some changes in the DIAdem script between DIAdem 9.x and DIAdem 10.x
Thanks for your help.

Hi supportko...
Yes, there were a lot of new features introduced in DIAdem 10.0, and 10.1. These are described in detail in each product's ReadMe file, and also in the Online Help under the "Index" tab at the node "DIAdem>>New Features>>New Commands and Variables"-- you will see 2 sections there: "Version 10.1", and "Version 10.0", showing you exactly what has changed. In most cases there is a compatability switch whenever a new feature creates a compatability issue for scripts developed in a previous DIAdem version. R&D works very hard to minimize the impact of new features on existing VBScript applications.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Message Edited by Support on 05-02-2007 03:56 PM

RE-Acknowledgement without any changes in the log???

Hello Guyz,
I am working on an issue where we have been receiving an excessive number of re-acknowledgments that are not as a result of a sales order change registering in the change log.
This problem is creating a significant amount of additional work for us internally and it is impacting our ability to provide timely information to our customer regarding their order.
Could you please advice what changes to the sales order will prompt a re-acknowledgement. I have checked everything there is no change in the programme or the SAP Scripts, there is no background job and there are no changes in the sales order,
I would really appreciate if you could please help me out in resolving this issue, Appreciate your help and waiting for some urgent replies.---Thanks.
MD

If you want to see the fields that will trigger the log.
go to AUT01.
Select Change Document Object,
Enter "VERKBELEG" -( This is the change document object for sales documents )
Press the display button. you can see all the tables that were enabled for logging changes.
By clicking on each table, you can identify the fields that were enabled to trigger the change log.
This is the answer to your question " where we can configure to trigger the log changes for sales order ".. I don't think it will solve ur main issue.
You need to look into your business process and ur System architecture to resolve the main issue.
Regards,
Ajai.
Don't forget to reward points if useful.

Any change in the record path function in 8.02?

Similar Messages

Maybe you are looking for