Any change to print to Canon MFP mailbox with A. Central Pro ?

We are using now Hp 4 / pcl5 and a Pdf drivers with Central Pro. Could it be any change to print a document to Canon's mail box by Central Pro ?. ^TRAYOUT command doesn't work with Canon iRC2380i and do not what a we need. Thanks for any help.

I do something similar to this. At work, I run a script that is launched at login, that does an +rsync -e ssh+ command to home. I use public key exchange for ssh login so the script doesn't get hung up waiting for a password entry. Because of VPN issues at work, I can't do the same thing at home. So instead, at work, I have a second similar script that is invoked by launchd. It kicks off at a specified time that is during my evening commute home.
Now, those two computers are tethered via ethernet. But I also have a laptop that roams wirelessly. I have the same sort of scripting arrangement set up there at user login, but I have a timer built into it. It loops issuing a +curl -s http://checkip.dyndns.org | awk '{print $6}' | cut -f 1 -d "<"+ looking for an external WAN IP address and if it gets a non-blank answer, then it assumes that it is connected to the internet, and continues with the rsync. If after a certain amount of time no valid WAN IPA exists, it times out and exits without doing the rsync.

Similar Messages

TS4498 I JUST, 9 July 13, bought Logic Pro... Any change Apple will allow for some type of upgrade to Pro X, since we had NO Fore Knowledge of its release...

I JUST, 9 July 13, bought Logic Pro... Any change Apple will allow for some type of upgrade to Pro X, since we had NO Fore Knowledge of its release...

I bought Logic Pro 9 a few days ago and they just sent me a response with a big NO! Twice! so far!
see this threads:
https://discussions.apple.com/message/22496383#22496383
https://discussions.apple.com/message/22490113#22490113
https://discussions.apple.com/message/22490862#22490862
https://discussions.apple.com/message/22500131#22500131
https://discussions.apple.com/message/22494804#22494804
This is no way to treat your customers.

How do i print address returns on envelopes with hp officejet pro 8500

how do i print address returns on envelopes with hp officejet pro 8500

This is done with your software that you have to print the envelopes. MS Word can do this, just use their help facility.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Is the Canon MF3010 compatible with the Macbook Pro (Mountain Lion 10.8.3)?

A recently bought Canon MF3010 laser printer does not seem to be compatible with my Macbook Pro (10.8.3). Does anyone have any suggestions on how to get it to work? It's not listed in supported software on the site and I tried downloading and intalling some software recently available on the Canon site, but that's not working either.

The MF v10.0.0 driver available from Canon works fine on OS X 10.8.
As for it not being listed in the supported software, if you are referring to the Apple KB article then that is just a list of what drivers are available from Apple. It's not a "only these drivers are supported" list.
So assuming you downloaded and installed the MF v10.0.0 driver, what exactly is not working? Have been able to add the printer but it does not print? Or are you not even able to add the printer?

What is the best printer to buy to use with my macbook pro, iPad 2, and touch?

Hi, Im trying to figure out which printer I should buy that is affordable and is compatiable with my macbook pro with os x lion installed on it, my ipad 2, and my itouch 3rd generation.
Thanks,
Preston

Try the HP photosmart B110 its a bloody fantastic wireless printer scanner and copier and its got a nice wee touch screen too.
You can wirelesly print when you are out and about send yourself a wee email to your printer and it will print out.
It also makes use of Airprint on your Ipad and your Iphone, I managed to pick this printer up for £30 as it was on a promo for a month or so dont know if its gone back up in price or not.
Print quality is amazing and it prints good photo prints too.
Ink is really reasonable and cheap for this printer too, and not only does it take seperate black cartrige but all the colour ones are seperate too which its cheap for ink in the long run ;0)
Hope that this offers some help

Can't Print to Canon ImagePROGRAF 600 with IMAC running Mavericks

I have a new IMAC running Mavericks connected to a networked Canon Plotter. I can plot to it using my old MacBook Pro running snow leopard with the 2009 Driver Ver. 2.17. And my office mate can print to it using a 2009 IMAC running mavericks with the 2012 Driver and ver. 3.10. When I go to print, in the page set-up of the print window I can only select MANUAL for the paper feed, I can't change to cassette or Roll, and then an alert pops up saying: "Manual is not available..."
If I ignore that and continue trying to print I get a printer error message say: "Open error: Try turning the printer off and back on again..." This doesn't work either.
I've tried going backwards in software generations but that only creates more problems. The Mountain lion version allowed me select MAUAL or CASSETTE in the page set up window but then the ImagePROGRAF Preview said "That function is not support by this printer." Has any one experienced this and solved it? Thanks.

lambarena wrote:
When I go to print, in the page set-up of the print window I can only select MANUAL for the paper feed, I can't change to cassette or Roll, and then an alert pops up saying: "Manual is not available..."
I think this could be related to a communication problem between the Mac and iPF. I don't have an iPF600 but do have an iPF8400 and iPF9400S. I downloaded the v3.10 driver for 10.8 and installed it on 10.9.5. I then created a dummy IP address and selected the iPF600 driver. When I first tried to print I got the following pop-up.
As this IP address was not connected to any printer I cancelled this window and then found the same symptom as you i.e. Only having Manual and selecting it resulted in an error window appearing. I also found that when I changed to the Main menu, the Media Type drop menu was stuck at Plain Paper.
I then created another printer to the iPF8400 but using the iPF600 driver. When I selected to print, I got the pop-up again. This time I entered my password and then found that the drop menus worked in Page Setup and Main.
So when you added the iPF600 to Printers & Scanners, did you get the pop-up above?
Also, if you select the Main menu, is the Get Information button available?

Unable to print to Canon iR-Adv C5045 from MacBook Pro that is connected to Windows computer and shared on the network

I am unable to print to a Canon iR-Adv C5045 from a MacBook Pro (OS X 10.9.4) that is connected to Windows NT computer and shared on the company network. I am connected to the network by ethernet.
I was able to add the printer manually by going to Advanced, Windows printer via spoolss, smb://computer name/printer name and used the Canon iR-ADV C5045/5051 driver.
When I print it appears to be printing but nothing comes out. I checked the completed jobs from the Print Queue and the job is listed. Checked the print log on the printer and it isn't listed. Is there a different driver I should be using for this configuration?

You may not have a choice as to what driver you can use. If the ADV C5045 only has the default UFR2 printer kit, then you will have to use the UFR2 driver - which is what you are using now. If you can access the copier, press the Counter Check button on the control panel. Then on the display you will see an entry labelled Check Device Configuration. Select this and scroll down through the pages. You are looking for an entry called PS. If you see it then the Canon does have the optional Postscript printer kit enabled and this will let you use an alternate driver. One suggestion would be to create the printer again using the same setting that you have done already but this time select the Generic Postscript driver included with the OS rather than use the Canon driver. This will help to determine if the driver is the cause.
If there is no PS option you will have to use the UFR2 driver and this could be the problem, as the Canon drivers don't always work well on a Mac via a Windows share. As a test, are you able to create a print queue directly to the Canon rather than via the Windows share? If you can, then this will let you check if the driver currently installed will work, as there can be settings on the copier that can block/stop you from printing. Assuming that you can print to the Canon with a direct connection from the Mac, then we can work on getting the printing via the shared queue. But if it doesn't print directly from the Mac, then it confirms that it may not be the server and more to do with the copier.

Is there any way to print wirelessly using Airport Extreme with an older printer (HP Laserjet 2100 TN) - no USB connection.

I have an older printer and currently use a Cisco wireless router with Network Magic software which allows me to leave my 30 pin printer connected to the desktop computer and share the printer with everything on the network. Does the Airport Extreme allow for this? I am just connecting one that I purchased but can only find documentation on connecting the printer via USB (which my old printer does not have). The printer is late 90's vintage, but its comercial grade and is still one of the best printers I have used so I want to keep it going for now.

I don't really know much about anything BUT with that said, I have PCs, I have an old commerical work horse HP laser printer that works with the Airport Express as a print server through my wireless router. But having problems with my wireless router, never my AE, now how to change from WEP to WPA etc.for a new wireless router. Maybe I need to look into the Extreme. Good luck

I could not print using Canon MF8300C Series with Yosemite 10.10.1

After download and installing, I am not able to print using MF8300C Series. Help anyone?

So assuming that you have downloaded and installed the Canon MF Driver v10.3.0, have you been able to add the printer in Printers & Scanners? And if yes, does this printer go through the motions as if it is going to print that then fails?

How can I get two-sided print on Canon Pixma IP3000 with Snow Leopard?

I've just upgraded to Snow Leopard and find that duplex printing is no longer available. How do I get it back?

You should have a menu item called Duplex Printing and Margin. This is part of the v10.26 driver that is provided via Software Update.
This was the same menu item that was available with the v4.8.3 driver that was included with OS X 10.5. If you were not using this menu previously with 10.5 then maybe you were using the iP3000 Gutenprint driver?
Pahu

How to print on envelopes C6/C5 with HP OfficeJet Pro 8600

With my printer HP Officejet Pro 8600 I want to print on envelopes C6/C5 (229 mm x 114mm or 9.0 inches x 4.5 inches).
The Officejet Pro 8600 support C5-envelopes and C6-envelopes but I could not find a comparable format C6/C5. Is it possible to make your own envelopes format and print on HP Officejet Pro 8600?
Thanks in advance.

Hi Grepolis,
Welcome to the HP Forums.
I see that you would like to be able to print on C6/C5 envelopes.
I will be happy to help you.
You could install the Deskjet 9800 as a generic driver which you would have different features available to you.
Making custom size prints.
Depending what operating system you are using. Here are the steps for Windows 7.
On the computer, go to start, devices and printers, select add printer.
Follow the steps, select HP and Deskjet 9800 from the list.
Set this one as the default printer.
Try creating a custom size envelope now with the generic driver.
Please let me know if you are not using Windows 7 and you need different steps.
How to Find the Windows Edition and Version on Your Computer.
Hope this helps.
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Why can't i sync my canon MG 5550 with my macbook pro via bluetooth

why can't i sync my mac book pro, wit my Canon MG5550

It worked via BT before?
The spes only say wifi.
http://www.canon.co.uk/Printers/Inkjet/PIXMA/PIXMA_MG5550/

Frustrated trying to print from Canon Pixma 9500

Does anyone have any tips for printing from Canon Pixma 9500?
I profiled the screen, printer and paper using colormunki.
Trying to print from photoshop. Frustrated that the printer interface isn't as described in many online forums (for example, it seems impossible to turn off colour management).
Getting strange blue borders around everything when using the paper profiles via colormunki.
Does anyone have any good tips?
.......help.....!

I used colormunki to calibrate my screen, printer and to make a paper profile.
Read one site that suggested the strange blue borders are related to V4 vs V2 paper profiles...whatever that means. Apparently it is an issue printing from photoshop.

Won't print to canon PIXMA ix6820

how can i print to canon PIXMA ix6820 with PSE12?

docforr wrote:
Thanks for responding to my plea.
I get a message that "the saved printer information is not compatible
with this version of photoshop elements or the saved printer is no
longer available.
The printer and Adobe elements were brand new. The printer works with
other programs. It never worked.
PDF
Have you ruled out an issue with the driver for the printer? It is possible that the material on the installation disk was developed prior to PSEv.12. I understand that everything is new, but who knows what the date of production is. You can check on Canon's web site for driver update.

Any way to print/export the markers list?

I have markers with notes created on the clips. For example some notes to VFX guy to make some quick fixes, or some notes to a colorist.
Is there any way to print or export the markers with the notes from the whole sequence?
Thanks

Nope.
Copy / paste into a text editor, then file a feature request.
You can file a feature request here:
http://www.adobe.com/go/wish

Any change to print to Canon MFP mailbox with A. Central Pro ?

Similar Messages

Maybe you are looking for