Any changes in formsweb.cfg ?

Hi all,
if I use Sun java plugin instead of Jinit,
is there any changes in formsweb.cfg ?
Please help
thanks in advance

Craig,
It is a wide-spread misunderstanding in the Forms world how to configure the SUN plug-in. This is due to SUN changing the specs very often.
The following is to say about jpi_classid and jpi_mimetype:
jpi_classid:
is ignored by Mozilla-like browsers (e.g. Firefox), and is only relevant for IE.
For IE you can specify an exact version in the classid or a version family (as shown in your example, using the FFFF). However, the latter notation only works for SUN plug-in 1.6.0.10 or higher. Specifying an exact version, however, always starts the latest available version (behaviour from version 1.5.0.9 on), so even if you specify a 1.4 version (the default config) it will start 1.6.0.x if you have installed that. With the FFFF notation you can force the latest installed version of the 1.4 or 1.5 family, as long as you also have installed a 1.6 version.
Note that SUN plug-in version is NOT SUN JRE version. From the SUN plug-in you can still run on JREs of other versions. This must, however, be specified in property JAVA_VERSION (which is not in the supplied base_jpi.htm of Oracle).
jpi_mimetype:
The attribute jpi-version is NOT supported anymore from version 1.5.0.9 on. You should omit it according to SUN documentation. It should certainly be omitted when your users use Firefox, because otherwise they need to have the exact version you specify here, which is highly undesirable, because Java auto-update would then break the application (SUN hates suppliers certifying for only a specific patch version, they work hard to guarantee backward compatibility, and those suppliers are just denying this nice feature).
So, always specify: jpi_mimetype=application/x-java-applet
(without the jpi-version attribute).

Similar Messages

How to set image source path in formsweb.cfg file in forms 11g

Hi,
I had written HTML code in the formsweb.cfg file in forms 11g. In the below code i am unable to retrive image file(i.e., .gif, .jpeg) from the server or local machine.
In the below HTML code i set image source in the image tag as below:
<img src="E:\Oracle\Middleware\Oracle_FRHome1\tools\web\html\agilis-life-new11_04.GIF"
Is this correct path to fetch the images from the server or local machine .
Please help me out how to set path for image in html or is there any alternate process to retrive images.
Here is the code :
[INDIVIDUALUAT]
workingDirectory=D:\Aims10dev\Work
form=LMstartup.fmx
userid=rmenu/rmenu@RLIFEQA64
codebase=/forms/java
imageBase=codebase
width=1005
height=750
WebUtilArchive=/forms/java/frmwebutil.jar,/forms/webutil/jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar,life-icons-round.jar,Agilis_Icon.jar,life_Icon.jar,personalize.jar,hyperlink.jar,amazingbutton.jar
archive=frmall.jar
separateFrame=False
lookandfeel=Generic
EndUserMonitoringURL=True
usesdi=yes
#HTMLbeforeForm= <table width="1005" border="0" cellspacing="0" cellpadding="0"><tr><td width="200"><img src="/forms/html/agilis-life-logo.gif" width="200" height="80" /></td><td width="10"><img src="/forms/html/agilis-life-new11_02.gif" width="36" height="80" /></td><td width="805" valign="top" background="/forms/html/agilis-life-new11_03.gif"></td></tr></td></tr></table>
HTMLbeforeForm=<body topmargin="0" leftmargin="0" > <table width="1005" height="100" border="0" cellspacing="0" cellpadding="0"><tr><td width="200" valign="bottom" ><img src="E:\Oracle\Middleware\Oracle_FRHome1\tools\web\html\agilis-life-logo.gif" width="200" height="80" /></td><td width="10" valign="bottom" ><img src="E:\Oracle\Middleware\Oracle_FRHome1\tools\web\html\agilis-life-new11_02.gif" width="36" height="80" /></td><td width="550" valign="bottom" ><img src="E:\Oracle\Middleware\Oracle_FRHome1\tools\web\html\agilis-life-new11_03.gif" width="550" height="80" /></td><td valign="bottom"><table width="219" height="90" border="0" cellspacing="0" cellpadding="0"><tr><td height="36" valign="bottom" align="center"><img src="E:\Oracle\Middleware\Oracle_FRHome1\tools\web\html\agile-logo.jpg" height="36"></td></tr><tr><td height="10" valign="bottom"> <div align="right"><span style="font-family:Arial, Helvetica, sans-serif; font-size:12px; font-weight:bold; text-decoration:none; color:#00000; " >Home | Change Password | Logout</span></div></td></tr><tr><td colspan="3" valign="bottom"><img src="E:\Oracle\Middleware\Oracle_FRHome1\tools\web\html\agilis-life-new11_04.GIF" width="100%" height="39" /></td></tr></table></td></tr></td></tr></table></body>

AFAIK, this is not the correct way to set the image location.
We call the working directory as context, so inside the context root along with WEB-INF, maintain a folder with name img and put all the images in that directory.
You can use either .\<image_folder> or the optimum way would be (if you are using JSPs) to use getContext() method and traverse accordingly.
FYI,,, using getContext() will give you context root directory, from there it is as simple as accessing any other folder.
Hope this answers your question.
Cheers,
Jeets.

Only display first form URL in formsweb.cfg . mutiple URL does not work

Hi Friends,
I have 4 form application with 4 URL.
app. server as 10g in window 2003.
URL like as:
http://salerpt.com/forms/frmservlet?config=emis-srmenu
fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory
fmb file location as C:\OraMid\forms\salerpt-Forms_source fmx name as srmenu.fmb in same directory
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
in formweb.cfg file
baseHTMLjinitiator=basejini.htm
workingDirector : workingDirectory= blank. but C:\OraMid\forms\salerpt-Forms right now
# Forms runtime argument: which form module to run
##form=test.fmx
## i moved bottom section of form section in here and before
##line as Forms runtime argument: database connection details
comment two line
#jinit_exename=jinit.exe
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
I create 4 sections as
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Information System (SIS)
form=regsale.fmx
form=salefinincial.fmx
form=rptinfo.fmx
However it only display first srmenu form interface that i put in( 4 different URL. only display first URL)
It seems that one formsweb.cfg, it doesn not support multip form setting application.
I have 4 small forms application with 4 URL for one formsweb.cfg.
What should I need to do? I think that i miss some set up in configuration.
I am waiting for your help!
JIm

Hi Bgrant,
Please review my formsweb,cfg.
Thanks
I am looking for your help.
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory= C:\OraMid\forms\sales-Forms
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
#form=test.fmx
[[srmenu]]
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Management Information System
[[regsale]]
form=regsale.fmx
width=1200
height=1500
pageTitle=Sale Management Information System
[[salefinincial]
form=salefinincial.fmx
width=1200
height=1300
pageTitle=Sale Management Information System
[[rtpinfo]]
form=rptinfo.fmx
width=1200
height=1000
pageTitle=Sale Management Information System
# Forms runtime argument: database connection details
userid=scott/tigerd@oracleapp
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
#width=750
width=1024
# Forms applet parameter
#height=600
height=768
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
#jinit_exename=jinit.exe
#Version=1,3,1,22
# Parameter related to the version of JInitiator
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
# Single Sign-On OID configuration parameter
oid_formsid=formsApp_sales.com_0Axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
# Single Sign-On OID configuration parameter
formsid_group_dn=cn=Logical Application Group, orclApplicationCommonName=formsApp_sales.com_0A4911717Fxxxxxxxxxx, cn=forms, cn=Products, cn=OracleContext
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=False
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

9i default TNS/DB in formsweb.cfg

I can't seem to make any use of "userid" work on the iAS middletier.
It's as if I can't override the basic userid setting: I can't do it in a named config and I can't do it if I put it in the URL. No matter what I do I'm forced to enter username, password and database. It's as if the use of userid just gets ignored. I can easily change userid when I run forms directly from 9iDS, it's just on the iAS it doesn't work.
Basically I need to be able to specify a 9i equivalent of putting "set LOCAL=MY_DB.WORLD" in a .bat file in the 6i fat client mode, ie. specify only the default database to be used so that the users don't have to enter that explicitly at logon. However, I can't find any documentation how this is done - all examples just say "userid=user/pass@<your_db>".
So I also need some sort of documentation that lists ALL possible commands in the formsweb.cfg, but I've been unable to find the complete reference guide for that.
Sincerely,
Jesper Vad Kristensen
Aarhus, Denmark
# formsweb.cfg start #
# $Id: formsweb.cfg,v 1.23 2002/01/25 06:51:41 oraforms Exp $
# formsweb.cfg - Forms Servlet default configuration file
# This file defines parameter values used by the FormsServlet (f90servlet)
# DEFAULT CONFIGURATIONS
# These are the default settings. Any of them may be overridden in the
# Named Configurations section. If they are not overridden, then the
# values here will be used.
# System Paremeters cannot be overridden in the URL. User Parameters can.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar,/forms90/webutil/SmileyBridge.jar
#baseHTML=base.htm
#baseHTML=e:\webutil\server\webutilbase.htm
#baseHTMLjinitiator=basejini.htm
baseHTMLjinitiator=e:\webutil\server\webutiljini.htm
#baseHTMLjpi=basejpi.htm
baseHTMLjpi=e:\webutil\server\webutiljpi.htm
baseHTMLie=baseie.htm
HTMLdelimiter=%
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=e:\KASSforms\forms
envFile=default.env
# The next parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x. Put IE=native if you want the
# Forms applet to run in the browser's native JVM.
IE=JInitiator
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
# 1) Runform arguments:
form=tdimenu.fmx
userid=
# These settings support running and debugging a form from the Builder:
otherparams=debug=%debug% buffer_records=%buffer% debug_messages=%debug_messages% array=%array% query_only=%query_only% quiet=%quiet% render=%render% host=%host% port=%port% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
debug=no
buffer=no
debug_messages=no
array=no
query_only=no
quiet=yes
render=no
host=
port=
record=
tracegroup=
log=e:\KASSforms\forms.log
term=
# 2) HTML page title, attributes for the BODY tag, and HTML to add before and
# after the form:
pageTitle=KASS
HTMLbodyAttrs=
HTMLbeforeForm=
HTMLafterForm=
# 3) Values for the Forms applet parameters:
serverURL=/forms90/l90servlet
codebase=/forms90/java
#imageBase=DocumentBase
imagebase=codebase
width=640
height=480
separateFrame=false
splashScreen=splash_velkommen.gif
background=
lookAndFeel=Oracle
colorScheme=teal
logo=
formsMessageListener=
recordFileName=
serverApp=default
# The following archive settings are for
# archive_jini - settings for JInitiator
# archive_ie - settings for IE native JVM
# archive - settings for all other cases (Java Plugin, Appletviewer, etc)
archive_jini=f90all_jinit.jar,/forms90images/kassimages.jar
archive_ie=f90all.cab,/forms90images/kassimages.jar
archive=f90all.jar,/forms90images/kassimages.jar
# Number of times client should retry if a network failure occurs. Only
# change after having read the documentation.
networkRetries=0
# 4) Parameters for JInitiator (used with Windows clients)
# Page displayed to Netscape users to allow them to download JInitiator.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameters related to the version of JInitiator.
jinit_classid=clsid:CAFECAFE-0013-0001-0009-ABCDEFABCDEF
jinit_exename=jinit.exe#Version=1,3,1,9
jinit_mimetype=application/x-jinit-applet;version=1.3.1.9
# 5) Parameters for the Java Plugin (used with non-Windows clients)
# Page displayed to users to allow them to download the JPI
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameters related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
jpi_mimetype=application/x-java-applet;version=1.3
# 6) EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# 6) OID Config parameters (for Single Sign-On)
oid_formsid=formsApp
oracle_home=e:\Ora9ias_forms
# NAMED CONFIGURATIONS
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
# Forms applet will run under the browser's native JVM rather than
# using Oracle JInitiator.
[ienative]
IE=native
# Example 3: configuration forcing use of the Java Plugin in all cases
# (even if the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
# Example 4: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file)
[debug]
serverURL=/servlet/l90servlet/debug
[native]
separateFrame=True
lookandfeel=Oracle
IE=native
form=tdimenu.fmx
[tdiwin]
separateFrame=false
lookandfeel=Generic
IE=JInitiator
form=tdimenu.fmx
[tdiwin_sep]
separateFrame=True
lookandfeel=Generic
IE=JInitiator
form=tdimenu.fmx
[kpm]
#HTMLbodyAttrs=onLoad='javascript:self.moveTo(1601,1201)'
separateFrame=True
lookandfeel=Generic
IE=JInitiator
form=tdimenu.fmx
# more efficient grey background
background=background_grey.gif
[test]
separateFrame=True
lookandfeel=Generic
IE=JInitiator
form=tdimenu.fmx
background=/forms90images/marselis_skov.jpg
envFile=test.env
[jevk]
workingDirectory=e:\jevk\forms\recompile_all
separateFrame=True
lookandfeel=Generic
IE=JInitiator
form=tdimenu.fmx
envFile=jevk.env
[jevka]
userid=jevk/tdi123@adsl
separateFrame=True
lookandfeel=Generic
IE=JInitiator
form=rollinf.fmx
background=background_grey.gif
[inwi]
userid=jevk/tdi123@adsl
separateFrame=True
lookandfeel=Generic
IE=JInitiator
form=admuser_inwi.fmx
background=background_grey.gif
# formsweb.cfg end #
# java console start #
Loading http://oiatst01.tdk.dk:7778/forms90/webutil/webutil.jar from JAR cache
Loading http://oiatst01.tdk.dk:7778/forms90/webutil/jacob.jar from JAR cache
Loading http://oiatst01.tdk.dk:7778/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://oiatst01.tdk.dk:7778/forms90images/kassimages.jar from JAR cache
Loading http://oiatst01.tdk.dk:7778/forms90/java/SmileyBridge.jar from JAR cache
connectMode=HTTP, native.
MessageManager: key VERSION bundle oracle.forms.engine.RunformBundle exception java.lang.IllegalArgumentException: unknown format type at
[[[Note here: I don't know what the MessageManager is talking about here as the error message isn't complete. I _may_ be related to wrong parameters in formsweb.cfg or some such]]]
# java console end #

Jesper,
all parameters that are understood by the formsweb.cfg file are listed un the System and user section. In Oracle10g Forms we also added comments to describe their individual meanings.
1. create a named configuration for your application and add
# assuming orcl is your database tnsnames name)
userid=@orcl
2. In your Forms application, using an on-logon trigger
BEGIN
LOGON_SCREEN;
message(get_application_property(username||'@'||get_application_property(connect_string));
LOGON(get_application_property(username ||'@'||get_application_property(connect_string),get_application_property(password),true);
END;
If you want to also specify teh username so that he only needs to enter the password, you can pass userid=scott@orcl in the URL
Note that Oracle9iDS had a bug on Windows2000 that prevented the servlet from reading URL parameters. This problem is solved within Patch1.
Frank

Cgicmd.dat in formsweb.cfg?

Hi,
in my formsweb.cfg i have two alias that point to two different database.
I have only one cgicmd.dat and don't want to change code of forms for invoking reports.
I can put two different cgicmd.dat for pointing the two database ?
Thanks.
Best regards.
Francesco

I don't see any issue here. You have two alias in formsweb.cfg, each can point to its own database. And since you want to use the same codes for Forms and Reports that make it even more easier.

Cannot save formsweb.cfg through OEM

Hi All,
I am using Enterprise Manager with Oracle Application Server (Forms and Reports services), and cannot save changes to the formsweb.cfg file through OEM.
I can make changes to the file formsweb.cfg manually (with notepad), and the server itself sees these changes, but Enterprise Manager still shows the original settings.
In our application always we need to do change the of .JAR file simenteneously and it will be deployed in Particular user instance.
I initially thought this was a cache problem, and re-booted the host. After the rebooting also i cannot see the manual changes in OEM , but it still refuses to make changes itself.
Does anybody have any ideas??
Thanks in Advance!
Santosh

This is the forum for the SQL Developer tool. You should ask your question in an OEM or Forms forum

Cannot save formsweb.cfg

Hi All,
I am using Enterprise Manager with Oracle Application Server (Forms and Reports services), and cannot save changes to the formsweb.cfg file.
When I make changes to the file, and click Apply, the settings return to their original values. This is what I would expect with the Revert button.
I can make changes to the file manually (with notepad), and the server itself sees these changes, but Enterprise Manager still shows the original settings.
I initially thought this was a cache problem, and re-booted the host. Only then would Enterprise Manager see the manual changes, but it still refuses to make changes itself, or to see subsequent manual changes.
Does anybody have any ideas??
Thanks
Gavin

Me too, but let me add the following info:
lsof says the file is open by a java process that maps to dcm/lib/dcm.jar.
The dcm/logs/daemon_logs/log.xml contains:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2006-04-18T17:24:47.640-02:30</TSTZ_ORIGINATING>
<COMPONENT_ID>DCM</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID><myhost.domain.local></HOST_ID>
<HOST_NWADDR><ipaddr></HOST_NWADDR>
<MODULE_ID>oracle/defaultLogger/ExceptionLogger</MODULE_ID>
<THREAD_ID>Deamon Worker for TaskMaster of iAS instance at: /opt/oracle/s1/o
raForms2 JVM Id = 1b09468.10aae589966.-8000</THREAD_ID>
<USER_ID>oracle</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.240.3.201:4858:1145390087285:6</UNIQUE_ID><SE
Q>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Remote Execute failed: </MSG_TEXT>
<SUPPL_DETAIL><![CDATA[oracle.ias.sysmgmt.exception.InstanceNotFoundExceptio
n: Base Exception:
Instance [[system:{}], [FormsConfigFile:{name=reports}], [FormsConfigSection:{na
me=discoverer}], [FormsProperty:{id=reports_demo}]] was not found.
Resolution:
Please make sure the Oracle Home associated with the instance is correct.
at oracle.ias.sysmgmt.repository.DomManagerCollection.getInstance(Unknow
n Source)
at oracle.ias.sysmgmt.repository.RepositoryImpl.getInstance(Unknown Sour
ce)
at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.getEntity(Unkno
wn Source)
at oracle.ias.sysmgmt.entity.InternalEntitySourceImpl.getEntity(Unknown
Source)
at oracle.ias.sysmgmt.entity.TransactionVisitorSession.handleAction(Unkn
own Source)
at oracle.ias.sysmgmt.transaction.TransactionLog.setVisitor(Unknown Sour
ce)
at oracle.ias.sysmgmt.entity.Session.applyChanges(Unknown Source)
at oracle.ias.sysmgmt.entity.Session.<init>(Unknown Source)
at oracle.ias.sysmgmt.configsvc.NormalConfigurationHandlerImpl.evaluate(
Unknown Source)
at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.evaluate(Unknow
n Source)
at oracle.ias.sysmgmt.task.ConfigAdapter.evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sync_evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.internal_evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.RemoteEvaluate.execCommand(Unknown Source)
at oracle.ias.sysmgmt.task.DaemonWorker.run(Unknown Source)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>

Formsweb.cfg - background resets following form navigation

I'm running Forms 10g Release 2 on Windows.
I have set up background in the formsweb.cfg file to use a lightgray.gif file. When I open my application the background is light gray as expected however as soon as I navigate away from the first form the background changes to the default dark gray and stays that colour. I'm using jinitiator and seperateFrame=false
Any ideas what's going on ?

Try clearing the browser cache, or force a read every time.

Formsweb.cfg probelm, after addion of the new applicaiton enty........

Dear All
We are getting strange problem. When we add new application entry in formsweb.cfg in Oracle 9i AS 9.0.2.0.1. And when we access it on IE it doesnt work it show the follwoing error in java console....
We appreciate every one who want to resolve the issue, thanks in advance.....
Exception occurred during event dispatching:
java.lang.UnsatisfiedLinkError: bill_app.dll
at oracle.forms.webutil.cApi.CFunc.find(Native Method)
at oracle.forms.webutil.cApi.CFunc.<init>(CFunc.java:68)
at oracle.forms.webutil.cApi.CApiFunctions.register_function(CApiFunctions.java:732
at oracle.forms.webutil.cApi.CApiFunctions.getProperty(CApiFunctions.java:125)
at oracle.forms.handler.UICommon.onGet(Unknown Source)
at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
---------------------------------------

Thanks for your response......
The most strange thing is we dont change any thing, we just change the start entry which is in [ ]..............
see the following entry which works................"test" works, if we copy the same enty and just replace [test] with [dev], it doesnt work... and give the same message which i pasted in first post...........
waiting for expert opnion.....thnaks
=================
[test]
pagetitle= Test Application
workingdirectory=/u01/testapp/bin
webutilarchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
basehtmljinitiator=/u01/webutil/server/webutiljini.htm
basehtmljpi=/u01/webutil/server/webutiljpi.htm
basehtml=/u01/webutil/server/webutilbase.htm
otherparams=debug=%debug% buffer_records=%buffer% debug_messages=%debug_messages% array=%array% query_only=%query_only% quiet=%quiet% render=%render% host=%host% port=%port% record=%record% tracegroup=%tracegroup% log=%log% term=%term% connectstring=testdb frun=FIRSTMENU dllpath=c:\winnt\system32\
form=/u01/testapp/bin/SECONDMENU.fmx
================

Otherparams in Url and in formsweb.cfg

Hello.
There is a way to use the otherparams in url without substitute the one defined in formsweb.cfg?
For estance I have in formswebcfg defined the "term" parameter. If I need to user otherparams=myparam=myvalue this one also cancel the "term" param
Thanks in advance

Your statement is unclear. However, you can only pass one value for any one parameter. If you have a parameter with a value preset in formsweb.cfg (i.e. myparam=myvalue), you can override it by changing it in the URL. The url entry will take precedence over the value in the formsweb.cfg
If you are suggesting that by passing in your own custom param/value for otherparams is ignore the presets, this can be corrected. Do the following:
1. In formsweb.cfg, locate where "otherparams" is configured.
2. Add your custom parameter to the list. For example (I have removed a few from the default just to make it more readable):
otherparams=query_only=%query_only% quiet=%quiet% record=%record% tracegroup=%tracegroup% log=%log% term=%term% myparam=%myparam%Note how your parameter has been added to the end.
3. To pass your new param and value on the url, simply add it without the "otherparams=" part. For example:
http://server:port/forms/frmservlet?form=myForm&myparam=123
You can see other examples of this in the formsweb.cfg. Look for the comments labeled, " +Sub argument for otherparams+ "

Regarding HEIGHT in formsweb.cfg file

Hi All
I am working in Forms 10G.
All the application is running in production is showing in a small window , that because of the height in formsweb.cfg file. The height = 600 .
Now there is a requirment to show all the records in one shot without using the scroll bar .
so if i am chaging the block property to 30 or 40 then in one shot all the 40 records will show . But because in formsweb.cfg it is mention height =600, so it will come with a scroll bar . This I dont want .
So can I change the HEIGHt to , let say 700 or 800 ? I mean will it be any problem ? Is there any calculation for this ? I mean if I change the property here then do i need to change some where else as well ?

LuKKa wrote:
Hi François Degrelle
If I change Height and width to 100% , will it come perfectly in all the size moniters ,like 14 inch or more thank that ?The window size will correct but item remain as it is. Add this in your configure at formsweb.cgf
width=100%
height=100%Hope this helps

Formsweb.cfg

Hi,
Where can i find the 'jpi_classid=clsid:' for 'jpi-version=1.6.0_29'
Also, do i need to make any other modifications other than to modify the following in formsweb.cfg?
jpi_download_page
jpi_classid
jpi_codebase
jpi_mimetype
Thank you in advance for any help you can provide.
Dana

Take a look at Oracle White Paper Oracle 10gR2 Forms Services – Using Sun's Java Plug-in. This document is primariliy geared towards Internet Explorer so if plan on not using IE, the changes are the same with the exception of the jpi_mimetype variable. You need to exclude the jpiversion property for use with non-IE browsers. For exampe:
/* IE property */
jpi_mimetype=application/x-java-applet;jpiversion=1.6.0
/* Non-IE property */
jpi_mimetype=application/x-java-appletHope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Feb 1, 2012 12:24 PM

Issue in configuration - formsweb.cfg (10.1.2.0.2) using Sun JVM

Hi gurus,
Below is my config in formsweb.cfg, I want to use Sun JVM instead of Jinitiator
[customjpi]
baseHTML=D:\Ora10gDS\forms\server\base.htm
baseHTMLjpi=D:\Ora10gDS\forms\server\basejpi.htm
baseHTMLjinitiator=D:\Ora10gDS\forms\server\basejpi.htm
HTMLdelimiter=%
envFile=default.env
escapeparams=true
form=test.fmx
serverURL=/forms/lservlet
codebase=/forms/java
imageBase=DocumentBase
width=100%
height=100%
separateFrame=true
archive=D:\Ora10gDS\forms\java\frmall.jar
archive_jini=D:\Ora10gDS\forms\java\frmall_jinit.jar
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_09/index.html
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#Version=1,4,0,0
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_09
When I calling form using URL http://pc021161.cts.com:8889/forms/frmservlet?config=customjpi which is throwing errors.
Below is my log of Java console
Java Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\125217
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
java.net.MalformedURLException: unknown protocol: d
     at java.net.URL.<init>(Unknown Source)
     at java.net.URL.<init>(Unknown Source)
     at sun.plugin.util.GrayBoxPainter.setProgressFilter(Unknown Source)
     at sun.plugin.AppletViewer.initApplet(Unknown Source)
     at sun.plugin.AppletViewer.appletInit(Unknown Source)
     at sun.plugin.viewer.LifeCycleManager.initAppletPanel(Unknown Source)
     at sun.plugin.viewer.IExplorerPluginObject$Initer.run(Unknown Source)
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: oracle.forms.engine.Main
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Please help, if anybody have the idea of this error.
Thanks in Advance
Justin

My default.env file is pasting below:
# $Id: default.env 14-apr-2005.13:22:43 pkuhn Exp $
# default.env - default Forms environment file, Windows version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value in the Windows registry
# will be used. If no value is found in the registry, the value used will
# be that defined in the environment in which the servlet engine (OC4J
# or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=D:\Ora10gDS
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. c:\test\dir1;c:\test\dir2)
FORMS_PATH=D:\Ora10gDS\forms;D:\Source\FMB;D:\Source\LIB
# webutil config file path
WEBUTIL_CONFIG=D:\Ora10gDS\forms\server\webutil.cfg
# Disable/remove this variable if end-users need access to the query-where
# functionality which potentially allows them to enter arbitrary SQL
# statements when in enter-query mode.
FORMS_RESTRICT_ENTER_QUERY=TRUE
# The PATH setting is required in order to pick up the JVM (jvm.dll).
# The Forms runtime executable and dll's are assumed to be in
# D:\Ora10gDS\bin if they are not in the PATH.
# In addition, if you are running Graphics applications, you will need
# to append the following to the path (where <Graphics Oracle Home> should
# be replaced with the actual location of your Graphics 6i oracle_home):
# ;<Graphics Oracle Home>\bin;<Graphics Oracle Home>\jdk\bin
PATH=D:\Ora10gDS\bin;D:\Ora10gDS\jdk\jre\bin\client
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications. In addition, you will need to
# modify the PATH variable above as described above.
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
#GRAPHICS60_PATH=
# Settings for Forms tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>\forms\server
# System settings
# You should not normally need to modify these settings
FORMS=D:\Ora10gDS\forms
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=D:\Ora10gDS\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;D:\Ora10gDS\jlib\repository.jar;D:\Ora10gDS\jlib\ldapjclnt10.jar;D:\Ora10gDS\jlib\debugger.jar;D:\Ora10gDS\jlib\ewt3.jar;D:\Ora10gDS\jlib\share.jar;D:\Ora10gDS\jlib\utj.jar;D:\Ora10gDS\jlib\zrclient.jar;D:\Ora10gDS\reports\jlib\rwrun.jar;D:\Ora10gDS\forms\java\frmwebutil.jar;D:\Ora10gDS\forms\java\frmall.jar;D:\Ora10gDS\forms\java\frmall_jinit.jar
Regards
justin

How to add html image tag in formsweb.cfg file

Dear all,
I am trying to display one image in background(not on form) by using HTMLbeforeform attribute in formsweb.cfg.
from local machine that image is displaying..from other machine which is network I can able to access the forms first page but that image is not displaying..
Where i need to keep the image? Is there any shared folder to keep images?
The following code can give a clear idea...
# HTML page title
pageTitle=My Forms Server
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=<img src='G:\images\logo.jpg' align=left height=150 width=150>--wich loc i need to place the img
# HTML to add after the form
HTMLafterForm=<MARQUEE><font color=blue><b><I>HAVE A NICE DAY!</MARQUEE>

The image-tag has to point to an url at the application-server which is accessible from the client's browser. So, if your forms-url is something like
http://host:port/forms/frmservlet?config=xxxThe image-url should be something like
HTMLbeforeForm=<img src='/path/logo.jpg' align=left height=150 width=150>where path is a virtual directory on the application server. Either create such a virtual directory or use an existing one, like /forms/java, which points to $ORACLE_HOME/forms/java on the server.
You can test that by puttin the url "by hand" in the browser like
http://host:port/forms/java/logo.jpg

Application Server not reading formsweb.cfg

Hi all,
I've installed Apps Fusion middleware Version 12.1 on RHEL 3.3.
I'm able to access forms through direct path like
http://appshr:7778/forms/frmservlet?form=Holiday_master.fmx
but when i try to access using alias like below it gives me error FRM :40010 can not read Form abcd
http://appshr:7778/forms/frmservlet?form=abcd
I've set most of the environmental Veriable but still error persists...
I've had setup same Environment for same machine but OS was Windows Server 2003 R2 and it is worked/ing fine.
But not getting any idea where i messed up here in Linux?
any ideas will be appreciated.
Regards!

Thanks for the reply.
We tried the other what you told *<DOMAIN_DIR>/servers/WLS_FORMS/stage/formsapp/11.1.1/formsapp/config.* but we didn't find any file there.
We have two homes, one for DB and for Apps.
DB Home */data1/u01/app/oracle/Orahome_inv*
Apps Home */data1/u01/app/oracle/OraHome_frsvr*
My formsweb.cfg file contents are as below
===============================
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[abcd]
title=test form
forms=Holiday_master.fmx
userid=abcd/abcd
==================This is my environment setting
=========
SSH_CONNECTION=10.2.12.1 4713 10.1.100.101 22
TMP=/tmp
PATH=/usr/sbin:/data1/u01/app/oracle/Orahome_inv/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/data1/u01/app/oracle/Orahome_inv/dcm/bin:/data1/u01/app/oracle/Orahome_inv/opmn/bin:/data1/u01/app/oracle/Orahome_inv/Apache/Apache/bin
SHELL=/bin/ksh
HOSTNAME=appshr
USER=oracle
TMPDIR=/tmp
ORACLE_BASE=/data1/u01/app/oracle
SSH_CLIENT=10.2.12.1 4713 22
ORACLE_HOME=/data1/u01/app/oracle/Orahome_inv
TERM=xterm
INPUTRC=/etc/inputrc
G_BROKEN_FILENAMES=1
ORACLE_SID=appshr
LANG=en_US.UTF-8
SSH_TTY=/dev/pts/0
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
FORMS_PATH=/data1/u01/app/oracle/OraHome_frsvr/forms
HOME=/home/oracle
HISTSIZE=1000
LESSOPEN=|/usr/bin/lesspipe.sh %s
LAMHELPFILE=/etc/lam/lam-helpfile
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
QTDIR=/usr/lib/qt-3.1
ORACLE_TERM=xterm
===================is it due to wrong home setting in env file?
Regards..

Any changes in formsweb.cfg ?

Similar Messages

Maybe you are looking for