Any charging problems with the classic?

I recently bought a new 6th gen nano to use mostly in my car. I have an Alpine deck with the ipod connector cable. Everything works fine except that it wont charge when connected to my car.
So i've done a bit of searching and that seems to be a common problem with the new nano's. People are having trouble charging them with anything other than their computers.
I am going to return the nano and would like to get a classic to try. Has anyone experienced any problems with charging the latest classic on docks, wall chargers, in their cars, etc?
Thanks in advance for any advice.

I recently bought a new 6th gen nano to use mostly in my car. I have an Alpine deck with the ipod connector cable. Everything works fine except that it wont charge when connected to my car.
So i've done a bit of searching and that seems to be a common problem with the new nano's. People are having trouble charging them with anything other than their computers.
I am going to return the nano and would like to get a classic to try. Has anyone experienced any problems with charging the latest classic on docks, wall chargers, in their cars, etc?
Thanks in advance for any advice.

Similar Messages

  • Any documented problems with the 7200 over the 5400?

    Are there any documented problems in MBP17s that have the 100GB 7200 over the 120GB 5400?

    Not that I've heard of. I have a week 16 MBP with a BTO 7200RPM Seagate Momentus and its working just fine.
    The area above the hard drive, where your left wrist sits, gets a little warm after a while but nothing serious, just a matter of getting used to it.

  • I have a friend from Montreal Canada who is in U.S.A. for 2 months. Her old iPad has to be replaced. Is there any compatibility problems with the iPad made for U.S.A. and those one made for Canada?

    I have a friend from Montreal, Canada who is in U.S.A. for 3 months. Her old iPad is not working very well and she thinks about buying a new iPad. Is there any compatibility problem between iPad sold in the States and those one sold in Canada?

    http://www.apple.com/ipad/specs/
    http://www.apple.com/ipad/LTE/

  • Any known problems with the 1.2.3 update??

    My iPod is behaving just fine thank you so I'm always a bit leery to install any updates since I really got burned the absolute FIRST time that I tried to install an update less than a week after acquiring my video iPod.
    I've been told by others here to be suspicious of any update that ends in an odd number. Any truth to this?
    Current iPod software version 1.2.2

    I've recently acquired an iPod 30gig w/video and updated it to the 1.2.3 firmware update. It plays but without sound. I've recently learned how to rollback the update, and all said and done, it's without success. I have browsed almost all major sections in this fine forum trying certain techiques, and even got a hold of support and yet without avail. Funny thing is is that I sent it off prior to this while it was on warranty, and they replaced it with this. I am new to iPod, and am wondering if it is something stupidly simple.
    Is there anything that I may have missed in the setup process?? Almost forgot, it worked once, but when I tried putting more on it , well... it didn't work. I am not new to MP3 players, though, but iPod seems to be a bit touchy. Anyways, I'd appreciate it if anybody here has some kind of suggestions. I thank you all in advance. God bless, Scott

  • NEW MBP: any overheating issues with the newest MBP?

    I'd like to know if anyone experienced any overheating problems with the newest models? Plus, are they really all warped?? I wanna go for the 15-inch one...

    My MBP, received a week ago, got loco on me once and really started heating up with the fans going full-blast, but it turned out to be Spotlight happily trying to index a very large external firewire drive with an extensive photo collection. Once I disabled indexing on that volume, things returned to and have remained normal ever since. For ventilation purposes, you need to leave the area around the keyboard and around the display hinge free, since that is where the fans push the air in and out thru the machine.
    That's also why the jury is still out, regarding using a MBP for intensive applications in a closed-lid, external KVM configuration.

  • HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

    my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
    It seems to me that the connection port is faulty.
    George

    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • I recently upgraded from an 80 to 160GB Classic but only some of the artwork in iTunes is synching. There was no problem with the old 80Gb classic. any suggestions?

    I recently upgraded from an 80 to 160GB Classic but only some of the artwork in iTunes is synching. There was no problem with the old 80Gb classic. any suggestions?

    here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
    There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
    Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

  • Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

    Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

    Apple can replace the battery for $79 US.
    http://support.apple.com/kb/index?page=servicefaq&product=iphone

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • HT203200 I purchsed 2 albums and was charged for both, but only one downloaded to my Itunes account. The Billy Joel album did not even offer to download. It said there was a problem with the store at the end of the purchase.

    I recieved an error message during the purchase of an album, stating there was a problem with the apple store purchase. It led me to believe that the purchase did not go through, aas it never downloaded. A susequent purchase did go through and downloaded. How dod I retrieve the lost purchase?

    Have you received email receipts for them and/or do they show in your purchase history : http://support.apple.com/kb/HT2727
    They might just be temporary holding charges which will disappear off your card within a few days or so.
    If they do appear in your purchase history then you can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work (or if they are 'proper' charges but nothing appears on your history) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    For your credit card not being accepted (it is a credit card, not a debit card ?), then is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Does anyone have problems with the lightening to USB cable when charging from an outlet? After 6  months of use, it seems to wear out as a result of twisting caused by using the iPad while charging?

    Does anyone else have problems with the lightening to USB cables, particularly the longer version, when using the iPad and charging at the same time?
    If so, am I doing anything wrong?

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • I can not upgrade to quicktime 7.7.3 for windows vista.  Error message says there is a problem with the program installer.  Any clue as to how to get around this.

    I can not download quicktime 7.7.3 for windows vista.  The error message says that there is a problem with the windows installer.  Any clues?

    The error message says that there is a problem with the windows installer.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    Can you open the Preview program without loading a file, like by itself?
    If it doesn't load then I suspect a corrupt Preview preference file.
    Deleting the System Preference or other .plist file
    Can you open other files with Preview, like jpg's and images?
    How about other PDFs? or is it just that one you have downloaded?
    Run through this list of fixes
    Step by Step to fix your Mac

  • Any problems with the recalled hard disk drives, any problems with the recalled hard disk drives

    Has anyone had their defective hard drive replaced? 
    any problems with the Apple service or restarting the machine with a new hard drive?

    See this FAQ: http://www.thexlab.com/faqs/freeingspace.html

  • I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

    I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

    Zap the PRAM and Reset the SMC, then try again.

Maybe you are looking for