Any closer to a solution for apn in personal hotspot being fixed using 7.1

all three =)
http://www.adobe.com/devnet/flashmediaserver/articles/protecting_video_fms.pdf
regards
Leonardo França
Adobe Certified Expert Flex 3 with AIR
Adobe Certified Expert Rich Internet Application Specialist v1.0
Adobe Certified Expert Flash CS3 Professional
Certified Professional Adobe Flex 2 Developer
Adobe Certified Professional Flash MX 2004 Developer
http://www.leonardofranca.com
http://twitter/leofederal
Manager AUGDF - Adobe User Group do Distrito Federal
http://www.augdf.com.br
http://twitter/augdf
sfister escreveu:
Hello,
Our scenario is that we have an Adobe ColdFusion8 server running a portal application which will serve up SWF content from a FMS3 installation. We need to protect the SWF content from being a) downloaded to a users local machine and b) being accessed without being logged into the portal application.
Please correct me here if I am wrong - it looks like the combination of RTMPE + SWF Verification are the minimum necessary, but I am confused as to these other practices and which ones to use (or can be used on FMS and not FMIS):
1) Refererr and pageURL check validation
OR
2) IP Address validation
OR
3) White list domains
Any suggestions on the best method to accomplish this using RTMPE + SWF Verification + (1, 2, or 3)?
Thank you,
Steve
>

Similar Messages

I have a problem openning my Itune home, I'm getting unknown error 0x80090308, any body has a solution for this problem

I have a problem openning my Itune home, I'm getting unknown error 0x80090308, any body has a solution for this problem

hi marco
I found the problem. Do you have other wi-fi (w-lan) like repeater or tv-transmitter or d-link etc. if yes, please disconnect them once and try again after restarting the time-capsule resp. change the channel if you can to another one. then it should work again.
@ home i have a tv-transmitter via wi-fi and indeed, i changed the channel from 1 to 6 or something like that, then the iphone worked again.

TS1398 I have an iphone 3gs and since I made the 6.01 update everytime I want to join a wireless network I get the same error "incorrect password" when I now it's correct, any one have a solution for this? Tks

I have an iPhone 3gs and since I made the 6.01 update everytime I want to join a wireless network I get the same error "incorrect password" when I now it's correct, any one have a solution for this? Tks

I would say that you would want to look into the "Exchange Mode" for GMail. That would allow your iPhone to sync calendars, contacts and email with GMail just fine. Doing the same with your outlook should also then sync those same with your PC using Outlook. I've done teh iPhone side of this, but I since I don't run Lookout for my email client, I'm not sure how that will work on the PC side.

Does any one have a solution to a blank disk not being read and unresponive to the eject button?

does any one have a solution to a blank disk not being read and unresponive to the eject button?

Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive
The Stuck CD/DVD Thread

REGARDING SCRIPTS.... CAN ANY ONE GIVE THE SOLUTION FOR THIS

I have copied the standard script ML_SERVICE_ENTRY to ZFORM.... in tcode se71 but it has its original lang. - DE and lang - EN , if i get into this ZFORM ...
in change mode, the creation of windows, windows allignment and convert original lang. are in disabled mode , here i have to change the window size to add some text , is there any other method to change the language and to get these things in
enable mode. plz give some solution for this one.

Hi Mohan,
While copying itself U have to give the Language in which U want to maintain, else U are supposed login in with the original Language only.
Regards,
Mohan
*Reward if helpful*

I want to find any backup and recovery solution for SharePoint server 2013 enterprise

Dear Expertise,
Recent set up SharePoint server 2013 Enterprise, and looking for backup and recovery solution, does the built in Windows Backup can handle it, and how?
KF

Hi,
According to your post, my understanding is that you wanted to know some backup and restore solution for SharePoint 2013.
There are two Technet articles about the backup and restore, you can have a look at them.
http://technet.microsoft.com/en-us/library/ee428315(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ee662536(v=office.15).aspx
You can also use some third-part software tools to achieve the same scenario.
http://www.avepoint.com/products/sharepoint-infrastructure-management/data-protection/
http://www.sharepointreviews.com/sharepoint-reviews-articles/sharepoint-administration/254-sharepoint-backup-recovery-evaluation
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Can any body give the solutions for frequently asked questions

can any body help me in the following questions.
1 . what is a conversion routine .
2. how do you create fonts and colors in the sap scripts.
3. how do u upload a logo in a smart form .
4. can u get both landscape and portrait in same layout , if yes how .
5. what is the functional module used to upload excel file .
6. what is the functional module used to get longtext in the report for purchase orders and sales orders
7. what is the even alternative to initialization where authorizations are declared to run a report.
8. how the exceptions with in function module rise when they are uncommented.
9. how do u translate the report to other than system language.
10. how to debug a sf without putting a stop point.
11. what is the procedure to handle the data upload using table control in bdc.
12. what is the procedure to access the standard text into scripts.
13. what is the procedure to send the smart forms as a mail .
14. in bdc how can u handle the table controls .
15. there are 10000 records in a flat file and first record contains error , if I upload to the bdc program , and run in bdc session method what will happen.
16. how can u attach the transport request for scripts .
17. tools to transfer requests to quality control or production system.
thanks in advance.

Hi,
Pls check service.sap.com/certification or your local education center at www.sap.com/education
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

Are there any issues and potential solutions for large scale partitioning?

I am looking at a scenario that a careful and "optimised" design has been made for a system. However, It is still resulted in thousands of entities/tables due to the complex business requirements. The option of partitions must also be investigated due to large amount of data in each table. It could potentially result in thousands partitions on thousands tables, if not more.
Also assume that powerful computers, such as SPARC M9000, can be employed under such a scenario.
Keen to hear what your comments are. It will be helpful if you can back up your statements with evidence and keep in the context of this scenario.

I did see your other thread, but kept away from it because it seemed to be getting a bit heated. Some points I did notice:
People suggested that a design involving "thousands" of entities must be bad. This is neither true not nor unusual. An EBS database may have fifty to a hundred thousand entities, no problem. It is not good or bad, just necessary.
The discussion of "how many partitions" got stuck on whether Oracle really can support thousand of partitions per table. Of course it can - though you may find case studies that if you go over twenty or thirty thousand for a table, performance may degrade (shared pool issues, if I remember correctly).
There was discussion of how many partitions anyone needs, with people suggesting "not many". Well, if you range partition per hour with 16 hash sub-partitions (not unreasonable in, for example, a telephone system) you have 384 per day which build up quite quickly unless you merge them.
You own situation has never been fully defined. A few hundred million rows in a few TB is not unusual at all. But when you say "I don't have a specific problem to solve" alarm bells ring: you are trying to solve a problem that does not exist? If you get partitioning right, the benefits can be huge; get it wrong, and it can be a disaster. Don't do it just because you can. You need to identify a problem and prove, mathematically, that your chosen partitioning strategy will fix it.
John Watson
Oracle Certified Master DBA

Does any one have a template for a musical recital program I can use?

Needing a recital program for an upcoming event and was wondering if there are any templates available? Brian

http://www.iworkcommunity.com
however your best bet is to find a Word template and open that in Pages.
Peter

I lost my Blackberry and I need a solution for preventing information from being seen.

HELP! I lost my business BB Curve 8320 the other day. It was supposedly found and the person was going to mail it to me, but I haven't heard from him in 2 days. Is there any way to prevent him from looking at business classified emails on my phone? I do not have a password on the phone and called T-Mobile (my carrier) who says I am out of luck. Can you delete an email address or anything? I really don't want my information in the wrong hands.
Thanks for any help anyone can provide!!

Hi
Sorry to hear your trouble. maybe its in the mail as we speak.
If you have a BIS account, you could log-in on PC and edit/delete it. If you run on BES, your admin will need to sort it.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

SAP solution for Wyoming Worker Compensation code being 6 digits

I am trying to determine what SAPs philosophy is around the state of Wyoming changing their worker compensation code to 6 digits. The standard workman compensation code on the positions and jobs is only 4 in length. I am unable to find any OSS comments around this issue.

Dear,
Just search with Wyoming Worker Compensation code
Check for appropriate one ... if not relevant and not changed with customization settings by someothers - raise a note.
Note 594574 - Wyoming Workers' Compensation Code changed for 2003
Regards,
Syed Hussain.
Edited by: Syed Hussain on Dec 4, 2009 2:53 AM

Solution for unlocking legally an US iPhone and use it in France

Hello,
what is the solution to unlock legally an iPhone US in order to use it in France with Orange Carrier.
Thanks

You can't unless ATT is willing to give you an unlock code which is unlikely.

Simple solution for a simple person HELP

I am trying to build my first form. it is reading and
posting; but, when the data is received it contains all of the
formatting code for the txt. How can I make it so that just thext
entered is recieved by the ASP page??
Thanks!!!

Thank You kgald - I added the Target and Method arguments and
it is working perfectly!

Solution for this but in single query without using subquery and all

My Table Structure be like this
empid sal
100 5000
200 3000
300 2000
400 1000
I want the ouput like this
empid sal Running Total
100 5000 5000
200 3000 8000
300 2000 10000
400 1000 11000

You mean something like
select empno, sal, sum(sal) over (order by empno) from emp order by empno
EMPNO,SAL,SUM(SAL)OVER(ORDERBYEMPNO)
4444,,
7369,100,100
7499,200,300
7521,100,400
7566,100,500
7654,1250,1750
7698,2850,4600
7782,2450,7050
7788,100,7150
7839,5000,12150
7844,1500,13650
7876,1100,14750
7900,950,15700
7902,3000,18700
7934,1300,20000

Need billing number for a real person that can fix problems

I got Fios a few months ago. A new account was set up for Fios but I'm still being billed for DSL. I've been trying to get the problem fixed for months. The first month they credited back the Fios charge. The second month they said they would send someone out to make changes to transfer my copper line number to Fios but the person never came. I've called several times after that to get the problem fixed. This month they turned off Fios so I paid to have it turned back on in addition to paying my phone and DSL bill. I've been on the phone several times for hours with people that can't do anything to help so they transfer me to others or tell me to call back the next day because their shift is over or the person that can really help me has different hours. If anyone has the phone number to someone that actually fixed a convoluted problem, please message me. I'll go postal if I have to explain my problem to another series of people that can't do a thing to help me.
Solved!
Go to Solution.

Hi holeinone,
Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Any closer to a solution for apn in personal hotspot being fixed using 7.1

Similar Messages

Maybe you are looking for