Any comprehensive STEP-BY-STEP for uploading my ORIGINAL albums and singles to iTunes?

Any comprehensive STEP-BY-STEP for uploading my ORIGINAL albums and singles to SELL over iTunes?
This are all original (C)All rights reserved music, and I want it to be available over iTunes to sell as tracks or full album.
Thanks!

HelliXSystems wrote:
But this are companies.
Yes, they will do everything needed to get your music into iTunes. It is far easier to do it this way.
Most simply charge a small flat rate (~$10 a song, $40 an album).
If you want to do it yourself, you will need to register with Apple.
You will need to have at least 20 albums in yoru catalog.
See this -> https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wo/2.0.0.9.7.3.1.1
(emphasis mine)
The requirements to work directly with Apple are listed below. If you do not meet all of these requirements, you can work with an Apple-approved aggregator instead. Aggregators are third parties that can help you meet technical requirements, deliver and manage your content, and assist with marketing efforts.
Technical Requirements:
A Mac running OS X 10.5.8 or later
At least 512 MB RAM
QuickTime 7.0.3 or later. This is so you can encode and deliver content using our dedicated software.
For optimal performance, use an Intel-based Mac running Mac OS X 10.5 or later. However, PowerPC G4 and G5 are also supported.
At least 20 GB of available hard drive space (more for larger catalogs) is recommended.
A broadband internet connection with an upload rate of 1 MB/sec or faster is recommended.
To deliver music video or concert film content to the iTunes Store, you must use an Apple-approved encoding house. Encoding houses typically charge fees for their services. Learn more about the differences between encoding houses and aggregators.
Content Requirements:
At least 20 albums in your catalog
UPCs/EANs/JANs for all products you intend to distribute
ISRCs for all tracks you intend to distribute
Financial Requirements:
A U.S. Tax ID
A valid iTunes Store account, with a credit card on file
Apple does not pay partners until they meet payment requirements and earning thresholds in each territory. (This means you will not get paid until you sell a certain minimum amount of content) You should consider this before applying to work directly with Apple as you may receive payments faster by working with an Apple-approved aggregator.
If you meet these requirements and wish to apply, click Continue.
Note: Meeting these requirements and submitting an application does not guarantee that Apple will work directly with you. You may still be referred to an Apple-approved aggregator.
Interested in working through a third party to sell content on the iTunes Store? Contact an Apple-approved aggregator.

Similar Messages

  • Whenever i try to manually sync my iPhone with a new playlist on iTunes (on my laptop), it always gets stuck in step 7, Waiting for changes to be applied, and then nothing happens. I'm running the latest operating systems on both my iPhone 5 and macbook

    Whenever i try to manually sync my iPhone with a new playlist on iTunes (on my laptop), it always gets stuck in step 7, Waiting for changes to be applied, and then nothing happens. I'm running the latest operating systems on both my iPhone 5 and macbook

    I really don't appreciate the fact that no one from Apple seems to be dealing with the many, many threads that have started on this topic since iOS 7 came out. In any event, I seem to have solved my problem with a full software restoration -- that is, iOS software restoration.
    I clicked on "Restore iPhone..." which does a complete reinstall of the iOS but also all apps, photos, songs, etc. Took about 45 minutes, but seems to have worked.
    I had previously tried reverting to a backup of my iPhone, but that did not solve the problem. Only a full restore solved it.

  • When I drag ANY JPEG into a new folder of ANY kind, I get an alias, not an original. And, when I drag aliases onto a  blank disk to burn it, I get burned aliases, NO originals. That's what I'm asking. How do you drag a JPEG and NOT get an alias?

    When I drag ANY JPEG into a new folder of ANY kind, I get an alias, not an original. And, when I drag aliases onto a  blank disk to burn it, I get burned aliases, NO originals. That's what I'm asking. How do you drag a JPEG and NOT get an alias?

    Finder Help describes how to move, copy etc.
    As well, Apple - Support - Discussions - Moving or Copying Files and ...

  • IPhoto and compression of uploads to iWeb albums and Web Galleries?

    It appears it's been established that iPhoto automatically sizes uploads to Web Galleries and iWeb albums to 800x600 no matter the resolution of the original picture.
    http://discussions.apple.com/thread.jspa?messageID=5118968#5118968
    You can clumsily work around this in Web Gallery by uploading directly through the gallery upload button or via email, as discussed here.
    http://discussions.apple.com/message.jspa?messageID=5168599#5168599
    What I'm wondering is whether there's a way to do something similar in an iWeb album? My experience is that even if I do specify the option in the photo inspector to allow Original (Full Quality) downloads from the album, the files are still heavily compressed somewhere along the line, with 2.2MB originals coming back at 650KB or so.
    Can anyone shed any light on this?
    Message was edited by: MickMacPaddyWhack

    Hi.
    I don't have iPhoto 08 yet, but had a similar concern in iPhoto 6. I let iWweb do it's thing and then overwrote the images that it produced.
    How? I edited the photos to the way I wanted them in Photoshop or Aperture(!) and saved it out to the largest size (800x600, I believe). Then I set up an Automator action to dupe and resize the pictures to the thumbnail size. When done, I moved the files to my iDisk and put em wher they belong.
    It's a bit of a hassle, but I got the quality that I wanted...also, not sure if that'll work in 08...

  • Adding column to incident list report for indident details (original isue and resolver comments)

    Hi,
    we have SCSM 2010 with default reports. One very common quarterly requirement is that list of incidents for an analyst which is shown does not have any details of the incident.
    i would like to get a column to display the following 2 data fields :
    the original incident description and analyst comments on how the incident was resolved.
    can anyone help out in this regards ?
    Regards
    Zaid

    Hi Andreas,
    Thanks, yes i can see a lot of other table details too that mught come handy later :).   ok so the report that i run from the console Incident > List of incident > basically pulls data from this table ?
    Instead of changing the original report, i would like to copy the original report and do the changes to that one.
    how do i do that ?  this is my first actual SQL / reporting interaction. so i may need some assistance. :)
    here is what i ahev done so far :
    1) i have browsed to the SQL SRS web url and i can see the systemcenter>servicemanager>Sm.console.reporting.incidentmanagement folder
    inside there i can see the report i want to copy i.e listofincident report and the rpdl files.
    2) i created a new folder "custom reports" in systemcenter>servicemanager>custom_reports
    3) how do i get the list of incidents reports in this folder ?
    4) how do i modify the report to include the ResolutionDescription and Description column
    thanks for the help.
    regards
    zaid.

  • How do I get separate iCloud accounts for each family members device and still share iTunes?

    how do I get separate iCloud's for each family members iPhone, iPod and iPad and still share iTunes?

    Have everyone share the same iTunes store ID, but use separate IDs for iCloud.  The ID you use for iCloud does not have to be the same as the ID you use for the iTunes & App store.

  • Can I create a global custom step type, available for all sequence files through a single copy?

    I would like to create a custom step type and make it available to any (new or existing) sequence file, without having to copy/paste it every time, to avoid maintenance problems...

    Hi Andre,
    You need to create the custom step type in the station view rather in the sequence file view.
    There's a step type button near the Users Button.
    Click on this button then proceed in creating the custom step type as you would have done in the sequence file.
    If you are using TS 1.0.x then the new step type will be added to the types palette.ini.
    If you are using TS 2.0 then will be able generate a new group ini file to hold your custom step types.
    Regard
    Ray Farmer
    Regards
    Ray Farmer

  • When syncing my iphone using USB it lingers on "step 5: Waiting for changes to be applied" and then stops and doesn't sync my music

    When I try to sync my phone with the iTunes as I have in the past, the "sync animation" happens on my iPhone but it doesn't sync the music that I've manually added and deleted. I've used the same setup in the past so I'm not sure what is going on. Also, it takes quite a while for the sync sequence to run -- it lingers on step 5

    I had this problem - was driving me crazy. I tried many things including restores etc. The following solved it:
    Go into iTunes
    Open up your new iPhone on the tab in the top right corner
    In the Summary box - simply unclick "Sync only checked songs and videos"
    Click apply
    Then I was fixed!
    Good luck

  • FM, for uploading attachment in DMS and getting the LOgical & physical ID

    Hi everybody,
    I'm creating contract via FM, now I'd like to add attachments, I have been doing test and is working with attachments already created in the system. (This is in a SRM systems, but my question is about a FM in the BASIS part)
    I am filling out the parameter E_ATTACH with structure type BBPT_PDS_ATT_T. Basically I'm including the link between the attachment and the contract, but I should upload first the attachment to the DMS and then make the link.
    The question is. Does anybody know a function module that allow me previously insert my attachment. In that way I suppose I will know de LOIO_OBJID and PHIO_OBJID. (I am using LOIO_CLASS = BBP_L_DOC and PHIO_CLASS= BBP_P_CLASS)
    I have tested with SDOK_WS_UPLOAD, but I don't get any OBJID
    thanks
    Best Regards

    Hi,
    Thanks but in my system this FM doesn't exist.
    This is my components stack.
    SAP_ABA     700     0015     SAPKA70015
    SAP_BASIS     700     0015     SAPKB70015
    PI_BASIS     2005_1_700     0015     SAPKIPYJ7F
    ST-PI     2005_1_700     0005     SAPKITLQI5
    SAP_BW     700     0017     SAPKW70017
    SAP_AP     700     0013     SAPKNA7013
    SRM_PLUS     550     0012     SAPKIBK012
    SRM_SERVER     550     0012     SAPKIBKT12
    I suppose the FM you indicated is in other component.
    Any other idea about this.

  • Any news on Lenovo support for LTE 4G from ATT and/or Verizon?

    I'm getting close to ordering several T410 notebooks, but I came up with another reason to wait:
    As far as I can tell, Lenovo is currently installing WiMax 4G modems in the T410, but not the Qualcomm Gobi MDM9600 LTE 4G modem that supports both future LTE 4G service from ATT and Verizon and current 3G service from both carriers.  I would prefer to have a 4G LTE modem, not WiMax.
    Anyone know if Lenovo has any plans to start installing 4G LTE modems?
    The other option would be to get the current Gobi 2000 modem and just upgrade it later myself- is that sort of upgrade an easy card swap, or something harder (I'm thinking built-in 3G antennas may cause problems if I try to upgrade to LTE later).
    Any information would be greatly appreciated.
    Rob

    I'm interested as well. We are planning some X201 and T400 purchases.

  • HT201412 MY FACEBOOK APP WILL NOT OPEN! CAN ANY HELP? I HAVE RE-INSTALLED, RESET THE IPHONE AND RESYNCED WITH ITUNES BUT IT STILL WONT OPEN, BUT IT USED TO!!  Devi

    Hi
    My iphone app for facebook will not open. It has been re-installed and the phone re-set and also synced with itunes but it still won't open. It used to work, but seems after a last update, it will not open. This also is happening on my ipad. Any clues please??
    Tik Tak

    Leilani ~ Welcome to the Support Communities. Before posting your question it's worth searching the Communities — here's an Apple tutorial:
    Apple Support Communities: Searching
    ...But since you've already posted, look in the More Like This section to the right of your post. Also:

  • HT1349 my icloud and itune are not syn icloud is asking me for a different users name and password than itune i am lost and loosing info what can i do to syn itune and icloud .

    what can i do to syn my icloud and itune to one account?. In which i would only need one username and password.
    When i had setup icloud before i had to use a different email and password and now i can not retrieve nor update
    my account, it keeps telling me that my username and password is incorrect.

    Sign in with the correct user name and password for the iCloud account.
    This has nothing to do with them being "in sync".
    iCloud and iTunes accounts, which are simply Apple ID's, cannot be merged.  There is no way to merge Apple ID's.  If you chose to set up the device using one Apple ID for iTunes and another for iCloud, then that's the way it is.
    Alternatively, you could sign into iCloud with the same ID that is used for iTunes.  Whether this creates problems or not depends on how you currently have iCloud set up.

  • My iTunes does not recognize disc burner.  I read through answers on the web page and followed the instructions for removing the GEAR drivers and then reinstalled iTunes.  It still says there is no disc burner or software installed.  Can anyone help?

    These are my diagnostics:
    Microsoft Windows 7 x64 Service Pack 1 (Build 7601)
    IBM 8114W2C
    iTunes 10.5.2.11
    QuickTime 7.7.1
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 00CEA7FC09BD5910
    Current user is not an administrator.
    The current local date and time is 2012-01-17 16:41:32.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: b7d08a26c0b28e9f17d324690b8df8ca
    iPodService 10.5.2.11 (x64) is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: LITE-ON DVD SOHD-16P9S, Rev FUS5
    Data or MP3 CD in drive.
    Found 1 songs on CD, playing time 47:21 on CDROM-XA media.
    Track 1, start time 00:02:00
    Get drive speed succeeded.

    Couple of things I spotted right off ... diagnostics still don't show me as an administrator but I told it run as administrator.  When it asked to insert a prerecorded CD and then choose which drive to use, I have no drives in the menu to choose from but yesterday I had 2 and shows no external plug-ins installed.  Hmmm.  Fresh diagnostics below ...
    Microsoft Windows 7 x64 Service Pack 1 (Build 7601)
    IBM 8114W2C
    iTunes 10.5.2.11
    QuickTime 7.7.1
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.2.0
    CD Driver DLL 2.1.3.0
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 00D4AB7C099BA9C8
    Current user is not an administrator.
    The current local date and time is 2012-01-18 19:18:55.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: b7d08a26c0b28e9f17d324690b8df8ca
    iPodService 10.5.2.11 (x64) is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.

  • I want to download ios 1.0.3 for my ipod nano directly and not with itunes

    what should I do? please give me a direct link

    update : so after reading numerous posts, I tried unchecking entire playlist and just tried one of my playlists. That sync seemed to work, so I rechecked entire playlist and did the sync. It worked. Then I went in to my "walk to work" playlist and added some songs to see if it would sync now, and it did!!! so happy now. will see what happens tomorrow.

  • Step-by-step procedure to upload a file to server - web dyn pro

    hi ,
    can anyone provide a step byb step procedure here for uploading a txt file from the client to the server, not providing links , i am not getting the web dynpro guide right...
    Thanks,
    Anil

    Hi Anil,
    1) Create a Web Dynpro appliaction.
    2) In the view, create a file upload UI element
    3) In the context of the view create a context element of type "binary"
    4) In the doInit() method create a modifiablesimpletype for that context element.
    wdContext.getNodeInfo().getAttribute("<contextelementname>").getModifiableSimpleType();
    5) Now, bind the context element of type binary to the UI element.
    6) Now create a button UI element on the action of which we shall fire an event of uploading the file.
    7) In the event method for the button,
    - Create a File object using
    File f1 = new File("<path of the file to be stored on server>");
    - Create a fileoutputstream object to be associated with the above created file object
    FileOutputStream fop = new File OutputStream(f1);
    - Now the context element created previously contains the uploaded file in binary format. Convert this to outputstream format
    - And assign this to the fileoutputstream object
    - Flush and close the fileoutputstream and file objects.
    8) Deploy and run this web dynpro application
    Thanks,
    Samta
    PS : reward points for helpful answers.

Maybe you are looking for