Any configuration can control PO quantity exceed PR quantity?

Hello all,
Any configuration can control PO quantity exceed PR quantity? thanks.

hi,
Set the Following Messages as errors:
06 076 : Materials of requisition & item & alr. ordered in full
06 099 : Materials for all purchase requisitions already ordered in full
Hope it helps..
Regards
Priyanka.P

Similar Messages

Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
2) Are there any changes I can make to get this working again?
If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

Is there a way that I can control iTunes with the iPhone without any internet connections?

First let me say that I am ready to throw this POS in the lake. Is there a way that I can control iTunes with my iPhone without any internet connections? On my houseboat I have a wifi router and want to connect my phone to my computer to control my music which plays from my computer through my stereo. I can easily do it with my laptop without having to jump through any internet APPLE BS , but I dont want to have my laptop out on the deck. I just want to use the phone as a remote control.
Remote wont do it because it keeps saying Im not connected to the internet, even though is is connected to my computer. Same problem with JumiAmp.

It should have an option to manage iTunes library without network connection, like Bluetooth or connect directly to the computer without a router or wi-fi, i live outsite of the city and i dont have the ability to control my iTunes librry from the iphone

With out Controlling module configurations, can we Configure PP module dire

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Use an appropriate title. >
Hi Experts,
With out Controlling module configurations, can we Configure PP module directly?
Thanks
Chandra

Hi,
Yes you can configure PP with out CO but you will not get Product Costing results for the materials used.
You will not be able to link Activities, Cost Centers, Over Heads which are production activities.
Cost Analyisis for the Order will not be possible.
To say in brief Cost related entries or break up is not possible if CO is not implemented.
Regards
Balaji

I have just restored my iPad. When I try to set it up, it tells me that my configuration can not be downloaded. Never seen this before. Any ideas?

I have just restored my iPad. When I try to set it up, it tells me that my configuration can not be downloaded. Never seen this before. Any ideas?

Hello Abdo_Zain,
I would be concerned too if I was not able to gain access to my iPad. If you are unsure what your Apple ID is, you can find the steps in this article:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
You can reset a forgotten Apple ID password by going to the following link:
Apple - iForgot
https://iforgot.apple.com
Also, you may be able to skip the step of entering your Apple ID if you are setting up the iPad for the first time.
Thank you for using Apple Support Communities.
Best,
Sheila M.

Is there any iPhone midi controller that can control logic just by one usb

is there any iPhone midi controller that can control logic just by one usb line to the mac?
Free ones would be the best!
Thanks!

If you have a Mac Pro and an iPhone, surely you can afford a router? It's about the same price a a decent meal for two.

Is there any iPhone midi controller that can control logic just by USB?

is there any iPhone midi controller that can control logic just by one usb insert to the mac?
Free ones would be the best!
Thanks!

Although not USB, there are a couple of iPhone/Touch apps that can control the Mac using a wireless network. MobileMouse (free & paid versions) do a great job, as well as Logitech's TouchMouse. Both will allow you to use the touch screen to control the mouse, which essentially gives you the ability to do many things in Logic. I've used them, for example, to begin a recording, which frees me from being near the computer.

Plz any 1 can explain what read form and control from do in alv

plz any 1 can explain what read form and control from do in alv

Hi,
READ_FORM is used to get the form related data like WINDOWS, PAGE WINDOWS, etc
CONTROL_FORM
SAPscript control commands can be carried out with CONTROL_FORM. The
command should be specified without the paragraph format '/:' in the
parameter COMMAND.
EX..
CALL FUNCTION 'CONTROL_FORM'
 EXPORTING
 COMMAND = 'PROTECT'
 EXCEPTIONS
 UNOPENED = 01
 UNSTARTED = 02.
Thanks,
Naren

Any Configuration possible for Payment terms???

Hello Experts,
The Credit Control Manager would like to know if there is
any configuration possible in SPRO that can allow user to change the payment terms in an order to a lower level
but not at a higher level.
e.g. Payment terms can change from 60Days to 30Days but not from 30Days to 60Days.
Please answer me ASAP.
Regards,
Praveen

Hi Praveen,
Please check that in IMG through this path
SPRO>Sales and Distribution>Master data>Business partner>Customers>Billing document>Define Terms of payment.
If you are not able to change you can define new payment terms then you can assign that to the customer master.
I hope it will help you,
Regards,
Murali.

Direct connection between 2 clients without any configuration!

I wan to make a system act like hamachi or logmein (websever & clients).
I have a webserver on the internet and two client from different networks connected to this webserver, now i want to make directly connection between these clients without any configuration on router. I think it is possible because all infomation about clients network could be got from http request which they send to server. But i don't know what exact fields in the header of http request that i need and how to set them to create connection between clients. I need some ideas about this issue.
Edited by: tulous on Nov 20, 2008 7:40 PM
Edited by: tulous on Nov 20, 2008 7:41 PM

tulous wrote:
I know, so if you want to use a remote control tool such as: VNC, remote desktop you must config on router or server. But even if you had a proxy(permit port 80) when you type www.sun.com you will get data from it, this data was sent from Sun to your proxy and in some way the data was return to your browser. So i think if we have enough information(it come from the webserver) we could init a connection between 2 client. An example of this is Hamachi.
At first 2 hamachi clients connect to a server of hamachi, when they have their id, a tunnel between 2 clients was established without any configuration on proxy(certainly that server did not deny port of hamachi). From now 2 clients can exchange data not through the server. The same in logmein, you can remote desktop any where with zero configuration, but the speed is guarantee because they contact to server for query information, but the data was transmited directly. Sorry if i make mistake.It doesn't work the way you think.
There is a proxy or you have to have one side listening with a ServerSocket and have ports opened as needed. You can't create a Socket connection on server A between clients B and C and then pass it off to clients B and C and magically they just talk to each other.
It does not work that way. It is impossible to do it that way.

Configuration of controlling steps

Hi sap gurus,
I need help in configuring the controlling steps. I'll tell my requirements:
we have 2 types of products being manufactured:
1. standard products(made to stock) and 2. non standard products(made to order)
My mangement wants to be able to get the information about the amount of labour spent for each activity like assembly, fabrication, anodising etc. (as far as standard products are concerned), apart from the overhead costs
and as far as non standard products (we call them projects), the information that the management wants to capture is the costs incurred and revenues earned.
SO, I think i need to go ahead and configure internal orders.
So, as far as standard products are concerned, I think I need to go ahead and configure activity based costing and overhead costing.
If I'm wrong plz advise me(IF THERES SOMETHING ELSE I NEED TO CONFIGURE) on that and based on my requirements, if somebody has any material or documents, plz do forward that to me.
MAIL ID: [email protected]
regards
sandhya kiran.

can anyone help me on this please
regards
sandhya

Have an airplay enabled AV Receiver - how do i set up Airplay I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciated

You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network.

Single 3850(MC) how many AP can control

Hi All now i testing about 3850..
i have some question about 3850
1. how many APs can control in single 3850(MC)
if we buy Single 3850(48port) then can we use all port for AP?
2. build a MC-MA Wireless environment, If MC goes down MA Can still working without MC?(is there kind of NSF?)
3. for example MC has a AP and MA has a AP. then we can see ap only each 3850. how we can management whole APs
Prime infrastructure can see whole APs, is this only way ?. I think this is not good for management Wireless.
4. If MA has over two APs(AP1, AP2), User1 connected AP1, User2 connected AP2.
User1 need to connect with User2(FTP or something) , User1,2 can connect directly? without through of MC
MC-----------------MA
|
AP1 AP2
| |
user1 user2
if you have any answer plz talk to me.
thank you.

A 3850 can support up to 50 directly-connected APs.

Is there any way to control the volume on my Apple TV?

Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

Where can I update quantity in material master ?

I was working on STO (Stock Tranport Orders) scenarios
Bascially stock tranport orders can be done in three ways
1. Stock Transport via stock transport procedure using 1 step procedure
2. Stock Tranport via stock tranport posting using 2 step procedure
3. Stock Tranport using a STO ( in Tcode me21n, where we select STO)
Now, when I entered MIGO and selected Transfer posting and movement type 301
(Transfer posting from plant to plant) and maintained the material details
It is throwing up a message "Shortfall of stock level"
I went to material master of the respective material for both the plants and updated the base quantity in the sales view ( base quantity field , under the shipping data ( times of day) block)
Yet, it did not fix my problem and I am not sure where else I can maintain quantity in the material master for the materialAny inputs into the above will be helful
Thanks for your time

Hi,
If The material has no BOM then it mustbe a ROH material.
What u can do is :\
Goto Transaction MIGO do movement type 101 - goods receipt with purchase order.
If u dont have a purchase order than go with goods receipt with option as "others" and enter the material,Quantity,plant and storage location and post the goods movement.
After that if u check MMBE then the stock will be available.Then go for STO it should be fine.
So material master does not come into picture.
Check the same and come back if u have any doubt.
Prakash

Any configuration can control PO quantity exceed PR quantity?

Similar Messages

Maybe you are looking for