Any default sound boards in Flash 8?

I want to have a simple MP3 play on my site when I open the
page. I want
the MP3 to have a sound board attached to it though with
play, stop, pause,
volume, etc... Are there any of these built into Flash 8 or
is there a
place I can download one instead of taking my time to make on
myself?
Best Regards,
Chris Jumonville

You can save a CS3 .fla file to Flash 8 - Just do File >
Save As and set
type to Flash 8 document. Of course any AS3 isn't going to
work...
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Similar Messages

Default Sound device with attached USB devices

Hi,
my situation: i've got an iMac 27" with an attached 24" cinema display (using display port and usb). Also i've plugged in a usb headset (headphone with microphone).
Whenever booting up Mac OSX 10.6.4 (also happened to older version of Mac OSX, at least all 10.6.x versions) OSX sets the default audio device (input, output and system sounds) to the cinema displays audio device. No matter what i choose as the default sound device i have to reset it after every boot.
Does anyone know how to come around this? I know i can easily set the device by alt clicking on the speaker symbol in the menu, i know there are tools out there like SoundSource that let me even more easily set the sound device but all i want to have is a default sound device that doesn't get overridden on every boot.
Any help?

All right, I seem to have solved it. The fact that it was only working using plughw: should have tipped me off, but at any rate, this is my working ~/.asoundrc:
pcm.!default {
type plug
slave {
pcm "hw:1,0"
ctl.!default {
type hw
card 1

HP-HDX 18t w/ Vista 32 won't retain default sound source after sleeping

That about sums it up. It's a brand new HP HDX 18t laptop running Vista32. It's setup with HDMI to our flat-panel TV and we have a Turtle Beach Audio Advantage-Micro usb card so we can use the SPDIF digital audio passthrough to get the 5-1 dolby sound to the surround sound receiver. It all works as it should playing Blu-Ray DVDs as well as any other sound... no problem. If we completely shutdown and then turn it back on it's fine. But if we put it into sleep or hibernate mode instead, then it loses the default sound source setting we've chosen (SPDIF) and we have to manually reselect it. Same thing if we disconnect it entirely. But that makes some sense and we don't plan to do that a lot so it's not as big a deal.
Thanks for any insights.
I hope I've provided enough info.
Sheila
Message Edited by Sheila-Seattle on 01-05-2009 01:52 PM

I have the macbook pro 13 inch 2,66 Ghz april 2010 model.
I can't get my headphones to work in Windows 7, 64 bit(bootcamp). It seems like the cirrus logic CS 206 A (AB13)drivers are the problem.
I have installed the latest drivers, have set the headphones to standard audio device (I don't know how you call that option in english as my windows is dutch). I also disabled the macbook speakers, the digital audio device and nothing seems to work. I can play music through my macbook but can't play it through my headphones. In mac osx there is no problem at all doing this, the problem is only in windodws 7.
It's very annoying because I would like to play some games.
And yes I've installed the 64 bit drivers.

Cannot change target sound in drag and drop to "no sound" once a default sound is selected in Captivate 8

I was trying out all the options for a drag and drop interaction in Captivate 8 and selected one of the default sounds for a target. I want to change it back to "no sound", but the selection never sticks. Is there something I'm missing or is this a "feature"?

When you go to the “Format” tab of the drag and drop properties, there is an option called “audio” (right below the “depth” option).
It has default sounds you can pick (sound1, sound2, sound3, and incorrect sound). Or you can browse to an audio file. If I select one of the default sounds, and then decide not to use any sound, it will not change to the “none” option. I have to delete the drag and drop interaction and start over.
Robert Willis | 616.935.1155 | [email protected]
Measurement always affects performance.
The right measurement always improves results .
Find out how. Download our Return On People eBook.<http://bit.ly/151jD9C>
This message is for the addressee only and may contain confidential and/or privileged information. You may not use, copy, disclose, or take any action based on this message if you are not the addressee. If you have received this message in error, please contact the sender and delete the message from your system.

No sound coming through sound board with Adobe cs5.5

I nstalled adobe cs5.5 and im geeting no sound through my sound board

I'm afraid that before we can help you we'll need many more details: Mac or PC, which version of the operating system, what type of sound card (I assume that's what you mean when you say "sound board", whether the lack of sound is on recording, playback, or both, exactly what happens when you try to record or playback, that sort of thing.
A couple of general notes: Assuming you're on a Windows machine (if Mac, somebody else will have to help), go to the Windows sound controller and make sure you sound board is set up as the default device on both the recording and playback tabs. Go to the Advanced tab and select the same sample rate and bit depth on both recording and playback.
Then go to Edit/Preferences/Audio Hardware in Audition. Under Device Type, select MME or ASIO--if it's a built in sound card then it'll almost certainly be MME. On the drop down menus, select your sound card (which should be an option) under both Default Input and Default Output. Select your sound card output as the master clock.
Finally, set Audition to the same sample rate as you set on you Windows Audio control.
Anyhow, try the above--and we can get into more detail if you provide the extra info we requested.

Allow user to select default sound device.

Currently Spotify defaults to using the default sound device under windows when launched, it would be neat if you could choose which sound device you want to use isntead in the options screen, Thanks

I really need this feature. I use multiple soundcards to split outputs into different sets. For example. I do not want Spotify to playback using my headphones but my speakers while I play a game or anything else for that matter. I also tend to Stream some of my games and don't want Spotify to be recorded- This is the whole reason I had to set up another soundcard by the way.
Please, just add this small but essencial feature like any other Audio related product.

Does UCM 11g provide any default skinning options?

I have 2 questions basically:
1 )In UCM 10g there is an option to select skins IN My Profiles menu which provides 2 skin options, Oracle and Oracle2.. Is it possible in 10 G to create a website and use these two skins in your website to change menu, layout etc?
2) My actual area of work is to create a website in UCM 11g, i couldn't find any such option in 11 G which 10 G provided in My Profiles. Are there any default skins provided by 11G. How can I make use of these skins in my web application?
I found out that we can apply different kind of skins in 11g using ADF Faces. But that is not to be used in my project. Is it the only option in 11g?
Thanks in advance.

OK I think you have confused two things here.
1)UCM ships with a native interface that is delivered by UCM based on HCSP/IDOC (A proprietary server side scripting language for generating HTML) this has been the case for about 10 years or so. THis native interface is used to provide the basic CMS capability and is oftent used as a simple clean front end for document management type deployments. UCM has very limited abilities to natively support personalisation (it does this by storing user settings on the file system) and one part of this is the ability to choose a layout and a skin. THe rendering of this profile is done via the HCSP/IDOC.
2)Since the Oracle acquisition of Stellent (~2007) there have been a number of productised ways to integrate UCM behind the Oracle ADF front ends of JDeveloper, WebCenter etc. The latest version of Site Studio lets you do just that using SSXA. I am not an ADF guru switiching between skins sounds perfeclty reasonable. BUT this has NOTHING to do with the old Oracle Oracle2 skins as far as I know.
I think you may be trying to run before you can walk really. First get to know UMC, Site Studio and ADF, then look at Site Studio SSXA and hopefully you will understand how/where skins can fit in.
Not trying to put you off but you have set quite a challenge to yourself
Tim

How to use X-Fi Effects without selecting SB as the default sound device?

How to use X-Fi Effects without selecting SB as the default sound device?Hello everyone,
That's my situation.
I have Sound Blaster X-Fi Go sound card and I am using SRS HD Audio Lab. SRS HD Audio Lab was selected as the default audio device and X-Fi effects (X-Fi CMSS-3d, Equalizer etc.) was working without any problem in Windows Xp. I have Windows 7 now and when i select SRS HD Audio Lab as the default device, Creative effects are not working, i must select "SB X-Fi Go!" to get them working but i can't use SRS HD Audio Lab in that case. SRS is also using SB X-Fi Go sound card as the output and volume adjustment on console launcher is working but something is disabling the effects. Any solutions to enable effects ?
Thanks.

If the kernel modules for your sound card and webcam both support the index parameter (use modinfo to find out) then adding
options <name_of_preferred_card's_kernel_module> index=0
options <name_of_second_card's_kernel_module> index=1
to /etc/modprobe.d/modprobe.conf (or another modprobe conf file of your choice) should solve the problem.

Windows Default Sounds

Am using MSI K8N Neo4-F1, nForce4 Ultra drivers, Realtek Controller AC 97 Audio, drivers 5.10.0.6160. Sound on Windows media Player and Winamp are working fine but I have no windows default sounds, also there is no sound on web pages, youtube etc. Any help on this much appreciated.
TIA

Problem solved, I am using 5.1 creative system and had plugged out rear speakers, windows default sounds came up immediately when i reattached banana plugs, never came across this before as default sounds worked on any speaker configuration.

Recording from sound board?

We want to use Garage Band to record our Sunday worship services at church. Can we just plug a line from our sound board into the microphone jack on our MacBook? Then would we record in Podcast mode?
Thanks in advance for any input (pun intended).

Sherry Moore wrote:
Can we just plug a line from our sound board into the microphone line-IN jack on our MacBook?
yes:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)
Sherry Moore wrote:
Then would we record in Podcast mode?
that's fine (it doesn't really matter much)
note: making long recordings is typically better done with an audio editor (they're less prone to throwing modal error dialogs):
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Tecra 9000 - Modem and Sound Board

I have a Tecra 9000 that had a problem a cople of months ago.
The modem wasn't recognized any more....
Since the problem was not important I didn't take any actions.
But now it is the sound board that stopped working.
It isn't recognized by the OS any more.
What seems to be happening? Software or hardware problems?
Best Regards
Paulo

Hello
Its not easy to say, what the problem is (software or hardware). First of all you can try to delete these two devices (modem, soundcard) from the Device Manager. After booting the OS should recognize the devices. Furthermore you can try to install the new driver for these devices. If this action doesnt help, you can try to reinstall your system with the Recovery CD.
Bye

Fried Sound Board or Sound Card ???

This has been troubleshot with attempting PRAM, PMU, Disk Utility, Extended Hardware test, etc . . to no avail
There is no sound whether from Itunes or from web streams
There is also no chime at startup
I hooked up a direct line out into speakers and headphones as well with no sound
There is no optical light in the jacks on this model from what I can see
However, it did work coming from the USB into a Griffin and then into external speakers
So, someone said that the sound board is out
Another said that it is integrated into the logic board
Another said that, since the sound card is a Printed Circuit Board (PCB); then it is synonymous with the soundboard
So, my question is
Is my sound card fried?
Here is the part I would like to replace
http://www.ifixit.com/cart/customer/product.php?productid=460&cat=&page=1
not bad for 80 bucks
I really would hate to have to replace a logic board as that would be 10 times as much and I might as well buy a new computer

Did Extended Hardware Test disclose any errors? I have a PB 17" 1.3 that developed the "no sound in or out problem" and the AHT test reveals "Error 2ISS/1/5:0x42".
I believe this indicates an error on the main logic board, although I do not have access to the tech documents that explain the error codes from AHT. (Also, I don't have access to an authorized Apple dealer, since I live hundreds of miles from civilization.)
Replacing the sound card did NOT change the situation for me. Check with your authorized dealer before spending $80 on a sound card.
Personally, I love my PB so much (and need sound input/output so little) that I am willing to forgo audio functionality. My research (PowerBook Service Source) indicates that Apple techs will probably replace components one-at-a-time until the problem is fixed. (First, replace the sound board flex cable, then replace the sound board, and then replace the logic board.)
If you are still dead set on replacing the sound board, please contact me ([email protected]). It seems that I have a spare one...
Mac Mac OS X (10.4.9)

[SOLVED] default sound card changed

Hello all,
Been struggling with my arch64 and XFCE over the past couple of days. my arch32 gnome 2.x screamed, it was great.
Anyway, when I first installed Arch this week, I had sound(alsamixer reported SB Audigy 2 ZS [SB0350] as default). I then installed XFCE, updated, installed vlc, etc, and I had sound(alsamixer reported SB Audigy 2 ZS [SB0350] as default. I've been mucking around trying to get Arch to automount my DVD, and not sure what happened, but when I rebooted just now, I have no sound.
Now when I go into alsamixer, my default sound device is marked as ATI R6xx HDMI, with one S/PDIF connection MM.
What could have happened that made Arch/XFCE change my default sound card? I've check the forums, and didn't find anything. Then again, I've been living in forums for the past 4 days trying to solve various issues, I could have missed something, or gotten confused.
Any help is greatly appreciated.
-nixIT
EDIT: RTFM'ed (read the wiki, which was the only place I didn't look)
Last edited by nixIT (2011-05-19 23:31:04)

Hi, Masutu
Pulseaudio is in my daemon array:
DAEMONS=(@syslog-ng !network crond dbus @alsa @pulseaudio)
But what you've said about some program calling pulse and crashing things makes sense. How could I "correctly configure" pulse? What do you suggest?
My /etc/asound.conf is here:
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
It seems pretty the same what is written in some sites about pulse.
In a past time (with other computer), I just removed pulse completely. But now there is a warning about dependencies: gnome-settings-daemon and gnome-control-center. And I don't know how removing these Gnome packages will affect the window manager.

Is there any way to keep the flash from going off when you receive a text or other notification?

I have an iphone 4s. Is there any way to keep the flash from going off when you receive a text or other notification? I keep it next to my bed at night and keep thinking there is lightning when something comes thru. LOL

Go to Settings>General>Accessibility and turn LED Flas for Alerts to Off.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

Any default sound boards in Flash 8?

Similar Messages

Maybe you are looking for