Any defference  display icon between ecc and ecc6

Hi,
any defference  between ecc and ecc6  to display ICON
my problem is i was run the one program in ecc  then output shows with icons.
same program run in ecc6  output is same but ther is no icons like ecc
Regards
naresh

Hi
Good
Yes you could find some new icons in between ECC and ECC 6.0 but I dont think there is lots of difference between these two, though you have not mentioned the program name it is hard to give you the correct reply on that, but yes in some standard program cases you may find this kind of problems.
Thanks
mrutyun^

Similar Messages

  • Communication between ECC and CRM

    Hello,
    I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
    I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
       I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
    Probably communication between SD module of ECC with CRM.
    Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
    Any help is really appreciated.
    Thanks
    -Vishal

    Hi Glenn,
          I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
    Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
    My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
    Thanks
    -Vishal

  • Communication between ECC and SCM via XI

    I am trying to set up the scenario 'Purchase_Order_Processing' between
    ECC and SCM using XI. The SCM content for XI has been loaded into XI
    and this scenario is included in the content.
    We are running the following:
    ECC - Version 5.0 - 640 SP level 12
    XI - Version 3.0 - 640 SP Level 14
    SCM - 4.10 - 640 SP Level 12
    The connectivity between the systems has been set up as described in the configuration guides. On sending an IDOC (basic type ORDERS05) into XI I get the following error message 'Http server code 500 reason Internal Server Errorexplanation Error during parsing of SOAP header'.
    The Error XML is as follows:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!-- Call Adapter
    -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
    xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
    SOAP:mustUnderstand="">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
    <SAP:P1>500</SAP:P1>
    <SAP:P2>Internal Server Error</SAP:P2>
    <SAP:P3>Error during parsing of SOAP header</SAP:P3>
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>Http server code 500 reason Internal Server Error
    explanation Error during parsing of SOAP header</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    Any assistance would be much appreciated.

    Sravya,
    Yes this an IDOC to http scenario. There was no dump at the receiver end. I've found out what was causing the problem - I was using an adapter type of HTTP. It should have been of type 'XI'. I've altered this and it works. Hopefully this will resolve your problem Vinod.
    Richard

  • IDocs have disappeared between ECC and PI

    Hi All,
    A couple of days ago 3 idocs went missing between ECC and PI.
    That day 293 idocs of the same message type were sent to the same partner through PI. In PI we only found 290. The 3 IDocs were sent in the same second in the early afternoon. All IDocs before and after were processed correctly.
    The IDocs are unknown in IDX5 and in Runtime Workbench on PI.
    The idocs were not in SM58.
    I found them in WE05, with the correct status. The status update from status = 01 to 30 to 03 took place in the same second.
    25 seconds later, new IDocs of the same message type were created and processed successfully by PI.
    At the time the idocs disappeared there were no problems with either ECC or PI, as far as we know.
    The interface is live for more than 2 years. In the meantime no changes have taken place.
    I have read the links below
    Finding missing IDocs
    Interface Troubleshooting Basics
    It's a mystery to me. Where have those idocs gone?
    Anybody any idea?
    Kind Regards
    Edmond Paulussen

    Hi Edmond,
    On the SAP PI system have a look in transaction IDX5. Take the IDoc number that you could not find in PI and search them in IDX5.
    If you cannot find those IDoc in IDX5 then they never reached PI.
    Regards,
    Jannus Botha

  • Withdrawal Qty don't match between ECC and APO

    Hi Experts.
    I am facing a discrepancy for Withdrawal Qty between ECC and APO before delivery/PGI creation.
    In ECC T.code MD63 I am able to see the withdrawal Qty as expected but in APO a duplicated withdrawal Qty is being created. But this is not happening for all materials, only some specifics materials. I did a check in Material Master data and I have no found any difference between a material that is working and one that is not working...
    Can please somebody explain me why APO is dobling the Withdrawal Qty.
    Thanks a Lot
    Daniel Campos.

    Please check wthether you have dp index duplication in this problem.
    Please follow the process.
    For this process , you need to follow these steps .
    1. From the table /SAPAPO/MATKEY , find the product id of the product for which you feel there is problem .
    2. Find the location id from table /SAPAPO/LOC for the location.
    3. Use the above found 'product id' and 'location id' to find the dp index in table "/SAPAPO/DP_HEAD "  .
    Enter the planning version ' 000 ' in this table . If there is some error you will find multiple entries of the 'dp index ' in this table for the ' 000 ' planning version. If error found use below program to delete the dp index .
    4.  Precaution should be taken before we delete the 'Dp Index' as the consumption history is lost due to this .          In the program  'Z_DEL_WITHDRAWL'  there are 2 check boxes " update " and " list ". List will show the DP index and update will delete it. Need to extremely careful in this program as wrong selection will cause problem .

  • Difference between ECC5 and ECC6

    Hi ,
    Can any one let me know the difrence between ECC5 and ECC6, and is there any extra configuration in post-installation steps.
    regards!!
    Syed

    Hello,
    There is a post installation document available for both the releases.
    you can find ecc5 post installation document at following link http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000591511&_SCENARIO=01100035870000000202&_OBJECT=011000358700000093422005E
    cheers,
    -Sunil

  • Difference Between ECCS and BCS

    Hello Everyone
    Can any one explain briefly the difference between ECCS and BCS.
    Your response will be highly appreciated.
    Regards.
    DC

    Quick answer: EC-CS is on the R/3 platform, while BCS is on the BI platform.
    This topic has been discused numerous times - please search the forum for more details if required.

  • Block Demand Depend Interfaces between ECC and SCM

    Hello All.
    Is there a way to block only interfaces of Dependent Demand between ECC and SCM.
    I need to do this because ECC writes over my plan in SCM.
    Thanks and Best Regards

    Hello PrasunM
    For example:
    When you create an Order on finished material, SCM using PP method "3 - Cover Ind. Requ." creates DepReq on raw material.
    SCM using CIF sends PlOrd, PrdOrd and DepReq to ECC. I want send only PlOrd and PrdOrd, DepReq i only need in SCM side.
    Best Regards.

  • Best communication between ECC and PI

    Hi All
    SAP is planning to adapt Enterprise Service Architecture (ESA) in the journey towards Service Oriented Architecture (SOA).
    We are working on new implementation project. We have many asynchrounous scenarios. We would like to configure acknowledgements and also like to handle errors effectively.
    Could you please suggest which communication between ECC and PI  is preferrable?
    (Webservices, IDoc, BAPI or RFC)
    Thanks
    Sai

    IDoc, BAPI , rfc - all can be used for seamless communication between ECC and PI. It is totallu dependant on the application and way information is exchanged. For master and transactional data idoc are prefered as for the acknowledgements supported by it. Not sure how effeciently we can handle system and appl ack incase of bapi/rfc. but at the same time idoc will be a drawback for sync comunication where rfc/bapi is preferd. It is SOA or ESA the concepts build in SAP are targeted to serve the enterprise needs where idoc,bapi/rfc are used for servicing the business unit objectives

  • Data Inconsistency for 0EMPLOYEE between ECC and BI

    Hi,
    We do a full load to 0EMPLOYEE using 0EMPLOYEE_ATTR from ECC. There were records deleted for lot of employees (some action types) in ECC. This has caused data inconsistency for 0EMPLOYEE master data (time-dependent) between ECC and BI. In BI we have more records for these employees (Additional records have time-dependent range that were deleted from ECC but still exist in BI). These employee records are already being used in lot of InfoProviders. Is there an efficient way to fix this issue? One of the solution is to delete data from all InfoProviders and then delete from Master data for 0EMPLOYEE, but the deletion of employee records can happen quite often, so we don't want to take this route. Also, I tried to re-organize master data attributes for 0EMPLOYEE through process chain, but that didn't work either.
    Message was edited by:
            Ripel Desai

    Hi Ripel,
    I share your pain. This is one of the real pains of Time-Dependant master data in BW. I have been in your exact position and the only way round the issue for me was to clear out all the cubes that used 0EMPLOYEE and then delete and re-load 0EMPLOYEE data.
    I know this responce doesn't help you but at least you are not alone.
    Regards,
    Pete
    http://www.teklink.co.uk

  • Optimize the performance of the RFC call between ECC and CRM

    Hi,
    We are planning to extract sales orders, sales activites and service orders to dispaly it on the  PDF factsheet of the account.
    As of now, the PDF factsheet takes a long time to retrieve the data from ECC to CRM. Can you please suggest us on ways to  optimize the performance of the RFC call between ECC and CRM.
    Thanks in advance,
    Vamsi.

    Hello,
    [SAP Note 636906 |https://service.sap.com/sap/support/notes/636906]is quite useful here.
    Many times, the performance is poor due to function module CRM_CCKPT_EXPORTSUMMARY. This function module gets the customer number, the sales organization and the fact sheet view. If in CRM customizing, you use complete view (001), then all the views in ERP including all the info blocks will be retrieved, which will cause performance issue.
    To solve the issue, please use a limited view to retrieve the data from ERP - especially a view, which does not contain info block 013.
    Hope it helps
    Joaquin

  • Is there any difference in quality between mp4 and m4v?

    Is there any difference in quality between mp4 and m4v? I am figuring out how best to save old VCR files. Is the 264 category the best?

    So, what would that software be? Anything that I mentioned, e.g., iMovie? Any Video Converter?
    I'm a Mac user so I want files that play "natively" in QT X, QT 7, QL, iPod Touch, iPhone, iPad, and/or TV players. This means I want the H.264/AAC compressed data in MOV, MP4, or M4V file containers. I can use QT 7 Pro, MPEG Streamclip, and /or QT X to move MPEG-4/AAC compressed data to MOV file containers, MPEG Streamclip to movie M4V and MOV MPEG-4/AAC data to MP4 file containers, and Subler to move MP4 or MOV MPEG-4 AVC/AAC/AC3/Chapter data to M4V file containers. This is strictly a simple "copy" operation and no recompression of data is involved. (I.e., the quality is not changed.)
    iMovie is a video editor and it forces an export conversion of your project once completed which can degrade quality. Have never used the Any Video Converter so I don't know if it has an audio and/or video "passthrough" feature for data already in a compatible compression formats. If it doesn't then any conversion it makes has the potential to degrade video content.
    As to AVI, this is a legacy file container abandoned by Microsoft a dozen years ago in favor of their modernized WMV compression format/file type products. Compared to MKV, AVI is an outmoded/out-of-date container which I don't recommend you use unless you are a glutton for punishment. However, if you must use it, then you might try the AvidMux app. It can "copy" compatible content to a number of file container types—including AVI and MKV. Just don't blame me if its use creates more problems than it solves on current Mac systems.

  • Display alternates between dark and bright

    I have several issues but I suspect somehow they are all related as they all began about the same time, within about an hour of each other, which was maybe a week ago.
    Periodically, my display slowly cycles between dark and bright.  Sometimes the display will suddenly go to sleep on it's own, usually after a period of about 20 seconds of me not doing something and when I wake it up the display is quite dim.  Other times the computer goes to sleep (not just the display) requiring me to log back on.  I use password for startup.  I open the display settings after log-on and the brightness slider has somehow moved way over to the dark end (left).  I slide it up to where I like it and soon it does it again all by itself again after a very short period of inactivity.  I have noticed that if I leave the brightness control alone (dim) without readjusting it it seems to take longer for the other issues to develop.  I would normally place the brightness slider just under half way up.  My sleep time settings are currently: computer - 1 hr, display 15 min.  That is plugged in which is pretty much the only way I ever seem to use it ... plugged in.
    Another issue is an occaisional rapid beeping.  It's the same low beep that you hear when you try to do something stupid and the computer is telling you you've made an error.  The difference is this is a long, unending string of rapid beeps; I'd estimate maybe 15 - 20 beeps per second.  The sound does not stop.  I have to mute the speakers to shut it up.  I have not yet been able to determine a recognizable pattern of common variables for when this happens.  The other day when the computer went to sleep by itself and I woke it and tried to input my password and I saw that the input bar was filled with black balls as if it was remembering my password which I did not like but when I hit enter the logon dilaog box shook, the entry field emptied and refilled on it's own.  I held the backspace key for several seconds and nothing seemed to happen.  I used shift/command/arrow to highlight the entire string and deleted it but as soon as the characters were deleted I saw the input line quickly fill back up again one ball at a time at roughly the same rate as the beeps.  Then it occured to me that the beeps were similar to those you would hear if you held a key down and filled an entire entry field with a hundred of a particular character and was still holding down the key long after the field was full.  My first thought was that a key was stuck down.  Not so.  Each and every key is free to move and functions normally.
    Last night I closed the lid to put the computer to put it sleep before I went to bed.  About 3 hours later I was awakened by the sound of the rapid beeping.  I got out of bed and went to the computer and opened the lid to find the same input line black balls issue but this time it was accompanied by the beeping and the display was also cycling between bright and dim.  As it was the middle of the night I killed the machine by holding down the power button and forcing a shutdown.  This evening I decided to do the upgrade from 10.9.1 to 10.9.2 hoping that might help but it did not.  I have not heard the beeping since the upgrade but the display is still cycling, which was the first thing I noticed when all of this began.

    Turns out it may have been sofware issue.  I suspected software anyway because rebooting could temporarily cure it.  I spoke to an Apple Service and Support person on the phone.  She went through a fairly lengthy process with me to evaluate the machine and determine if it was hardware or software related.   The results of those steps did not lead her to any concrete conclusions but she was able to hear the beeping issue happening in real time.   She guided me through the steps of O/S recovery and now several hours later the machine appears to be functioning as it is supposed to.  Typically the issue(s) would show up after maybe twenty minutes or a half hour after a hard boot.  I am to monitor the thing for the next week or so watching for any signs of the issues slowly returning. 
    Here's keeping my fingers crossed.

  • No connection between ECC and PI

    Hello,
    I have developed proxy to file interface but I am not able to see any data flow between backend ECC and PI systems. I have gone through different blogs and forum threads to troubleshoot... creating RFC destinations, testing through RWB message, SLD configurations, SICF, etc. but I am not able to see any data going out of or into ECC. When I check SXMB_MONI or RWB message monitoring, I don't see any message either failed or success.
    I don't think ECC is connecting to PI. I am able to create proxy in ECC and configure both inbound and outbound proxy but I don't see any data go through ECC. I am able to import RFC and IDocs in Integration Repository. Can anyone suggest what could be the problem and how to resolve it?
    Thank you!

    Hello,
    I created a new test interface - File to RFC and tried to test it by sending payload from RWB and got the following error. I already checked that the host file has the server name and IP address entries.
    Adapter Framework caught exception: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM  TYPE=A ASHOST=HOSTNAME SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       partner '192.168.131.3:sapgw30' not reached TIME        Mon Sep 26 13:51:26 2011 RELEASE     710 COMPONENT   NI (network interface) VERSION     39 RC          -10 MODULE      nixxi.cpp LINE        3133 DETAIL      NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO       10061 ERRNO TEXT  WSAECONNREFUSED: Connection refused COUNTER     2
    Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM  TYPE=A ASHOST=hostname SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       partner '192.168.131.3:sapgw30' not reached TIME        Mon Sep 26 13:51:26 2011 RELEASE     710 COMPONENT   NI (network interface) VERSION     39 RC          -10 MODULE      nixxi.cpp LINE        3133 DETAIL      NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO       10061 ERRNO TEXT  WSAECONNREFUSED: Connection refused COUNTER     2 .

  • Same colors display differently between Illustrator and Photoshop

    Hi there,
    I would love to know why the same colors display differently between my Photoshop and Illustrator apps (CS3). For example, a logo will display much darker or more vividly in Illustrator than in Photoshop, same file, same colour values. My color settings are synchronized from Adobe Bridge to North American Pre Press 2. I've opened the logo file in RGB color mode, in both apps. It would be so helpful if both apps displayed the colours consistently.
    Any suggestions on how to do this would be wonderful!
    Thanks!
    Bobbie

    Hello Bobbie,
    I am using CS3 too and let me tell you that this Illustrator version is the worst ever. You best bet is to take the "Eye Drop" tool and select the Photoshop element to match the color.
    CS4 also have problems when handle placed items. Sadly I can tell you that CS2 is more reliable than CS3 and CS4.
    Not even if you use Pantone colors will match, Illustrator will change the colors making it impossible to match. "Adobe Quality"

Maybe you are looking for