Any delivery note can be created if transfer materil in storage location

hi
any delivery note can be created if transfer material between storage location in the same plant. Or can i do the GR for that

Hi,
This might help you.
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators:
E, K, M, Q
See also 321, 343, 349, and 455 for other stock types
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators:
None
315 Transfer posting storage location to storage location in two steps - placement in storage
In the receiving storage location, the quantity is transferred from the stock in transfer to the unrestricted-use stock.
Possible special stock indicators:
None
Reward points if useful
Regards,
Amrish Purohit

Similar Messages

Authorization Control for Transfer Posting's Storage Location

Dear Gurus,
Hi ! May I know is that SAP has any Authorization Object to control Transfer Posting (SAP R3 4.0B) ?
Let say in MB1B I only allow certain user to do transfer posting with P230 storage location, how should I control it ? With Authorization Profile?
I had tried remove all storage location P230 authorization M_MSEG_LGO from those user who are not allow to use, but sad to say that most of the user who allow to use transaction MB1B also able to do good receipt or transfer posting with storage location P230.
I had check those user's profile, actually in their authorization, there could not get P230 in their M_MSEG_LGO authorization object.
Thank you!
Warm regards

Hi,
I did not tried OLMB before, but I couldn't get the option you ask me to click.
Please refer to the screen, is it the Basis Administration is what you mention lately?
[http://www.pikipimp.com/pp/pimped_photo/s/image/40/552/543/OLMB-compiled.JPG?ts=1232093107390]
I had assign the storage location P230 to the authorize users, but the problem now was those unauthorized users also can use the storage location P230 to do Transfer Posting (MB1B) although I did not assign to them in PFCG.
Thank you.
Warm regards.

Stock Transfer between 2 Storage locations

Dear All
I want to configure Stock Transfer between 2 Storage locations.
I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
Regards
Vaibhav Mahajan
Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

Hi
Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants doc type UB), just goto MIGO
There are 2 options are there for Stock Transfer between 2 Storage locations
1. one step procedure movement type 311(from unrestricted to unrestricted)
323(from quality to quality)
325(from blocked to blocked)
2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
During this transfer no accounting document will generate because you are transferrring the stock within the plant,
Thanks

Can we block a material for particular storage location ?

We can allow material to storage locations by MMSC. Can we block a material for particular storage location ?
Please share ur view.

Hi,
If you want a material to be blocked, go to the Basic data 1 view of the material,there in the genral data you have " X-plant material status ". Also in Cost estimate 1 view of the material you have Plant Specific Material status. Use the options available to block the material in these two views.
Also u can goto MM06 where put material,plant,storage location.When u select enter just tick the check box of material,plant and storage location and save it.
Pls reward if found useful.
Regards,
Indranil
Message was edited by:
INDRANIL BHATTACHARYYA

Transfer stock from Storage Location to Bin

Dear All,
what is the procedure to transfer stock from Storage Location to Bin ( T.Code and Mov.Type)
waiting for your Reply
with best regards
Suman

Dear Kiran
Thnaks for your reply
Im doing Process as below...
T.Code:LT01
click on Transfer Order ( Header) select WITHOUT REFERENCE
WHNO: CWH
MOV.TYPE:999
MATL:
QTY:PLANT:
S/L
NEXT SCREEN
DESTINATION
ST.TYPE:
STORAGE SEC:
BIN NO:
AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
"CANNOT FIND SOURCE STORAGE BIN"
AFTER THAT IF I ENTERED
FROM
ST.TYPE:
STORAGE SEC:
BIN NO:
THEN SYSTEM GIVES ERROR MESSAGE
STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
PL. CORRECT IF IM WRONG
with best regards
Suman

Materialo slip no not updating when creating the transfer posting(MB1B 313)

Hi all
I have a problem in updating material slip no when creating the transfer posting(MB1B 313).
when creating the MB1B if i put the mat slip no manually then system updating in the material doc.
But when system creating the transfer posting(through auto Jobs) the material slip no not updating in the material doc.
this is started to happen only after i deleted the condition records(ZDRL) for printing the doc for a relavent storage location.Kidly let me know is there any relation between ZDRL and the material slip updating.
Thanks
Manju

hi krishan,
Pl ensure that there is any release strategy, or in the transfer posting enter the plant and m.type also storage location in the application tool bar click with reference to PO, and enter the po number and try to proceed. it will work.
Regards,
nagarajan

How to update delivery note comment while creating return order

Hi all.
I need to update the delivery note comment in return sales order.Could you pls let me know is there any FM to achieve this pls?
Thanks in advance.
Thanks & Regards,
sami.

Hi,
Try using SD_SALESDOCUMENT_CHANGE function module. Give the text in SALES_TEXT parameter.
KR Jaideep,

Abap Why Delivery no. can't creat batch number when PGI?

Hello.
Now I am working on PGI. I use the enhance to create default batch. But the delivery no. batch number can't be created when PGI.
It only can be created when LV01N creating dn no.
So can you offer me some help? So bad.....
Thanks for your help.

Hi,
You can follow a different approach. Send the output of the Smartform to the spool.
You have a Function Module to read the spool and convert it to PDF . Then there is one more function module to attach the PDF and send it as a mail.
You need to configure SMTP in Tcode : SCOT.
Search the forum with emailpdfattachment
You have umpteen postings available.
Pls reward if useful.
Regards,
Laxman Nayak

How can I create a folder on internal storage of DMP 4310?

Hi. I'm a junior engineer in Korea.
I have a question about DMP 4310 with creating a folder of internal storage.
I can acess the internal storage but, I cannot make a folder or file uploading.
I already checked about Access mode - read and write, and also DMP management - FTP Server On, and password too.
It's enable to read but, unable to make a file or a folder.
when It rejected my order, I saw a message on my screen like this.
"550 Create directory operation failed."
I searched this letters, but couldn't get any information to handle this issue except for showing of permision error message of linux.
now, I am begging for your kindness.
what am I suppose to do?

I checked my permission, and I got the result.
By the result, I cannot make any folders or files except for path of /usb_1/
So, I can upload file to /usb_1/ and play it. that's it.
self question, and self answer... so sad to less people to answer this DMS section...

Stock transfer between Plant/Storage location to Plant/Storage location

Dear Experts,
This is a MM component of SAP Retail.
We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
When we run replenishment planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
I do see the following set up in SPRO and I have done the following.
Step1: Activate Stock Transfer between Storage Locations SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
Step2: Assign Delivery Type and checking rule according to storage
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
Step3: Define Shipping Data for Stock Transfer between Storage Locations
SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations 
Step4: Define Rule for Determination off Shipping Point SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
Step5: Shipping Point Assignment According to Storage Location
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
Question.No:1- After completing the above set up in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
Question.No:2
I do see the following setting.
Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
Display the IMPLEMENTATION
Double click on the method GET_SUPPLYING_SL
Click the Execute button
Click the detail button on IF_EX_MD_EXT_SUP
Execute GET_SUPPLYING_SL
There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
Kindly provide your inputs.
Thanks,
Vasanthan

Dear,
Have You configure MRP in second plant (where you want to transport the Material).
Please try with this and do again Po for stock transport.
Regards
Piyush Patel

Set Up stock transfer order between storage location

Hi,
We are already using Inter company Stock transfer order.
Now we have found that it is possible to set up Inter company stock transfer order between two storage location.
Can i have some configuration steps. I have tried it but not working.
Thanks in Advance
Samir Bhatt

HI,
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
Regards,
Chetan.

Transfer material from Storage location to Storage type.

Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
Anil

Hello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.

How can I include the minimum stock of storage location in the mrp run.

Hi all,
I have in plant 1030 storage location 1001 and 1006.
MRP1 Lot Size = EX
           MRP type = PD
           Reorder Point = 5
MRP2 Safety Stock = 5
MRP4 for 1001 is not filled
MRP4 for 1006 Sloc MRP Ind = 2
                         Reorder point = 2
                         Replenishment qty = 3
If no stock and I run the mrp I get
a PurRqs for 8 with a automatic MtlRes of 3 going to storage loc 1006
If I create a reservation in 1006 for 10 units and run the MRP again
a PurRqs for 15 with a MtlRes of 10 going to storage loc 1006.
I want the result to be PurRqs for 18 with a MtlRes of 13 going to storage loc 1006.
10 for the reservation and 3 to fill storage loc 1006 with the replenishment qty.
How can I acheive this?
Best Regards!
Curtis

Hello Curtins
Please observe what is stated on question 6 of FAQ note 550954, regarding storage locations planned separately:
6. Question:
    A storage location should be planned separately. Is it possible to
    consider external requirements?
    Answer:
    No. The storage location MRP is a very simple reorder point planning
    procedure, during which only reorder point and replenishment
    quantity are defined. More complex settings can be implemented via
    storage location MRP areas.
Therefore, I'd suggest you to use MRP areas to map this scenario.
Best Regards
Caetano Almeida

Transfer posting between storage location

Hi
2 questions: we are going to create a new storage location to make material movements:
1- We have to move stock between storage location.
Storage A(new): without WM
Storage B: under WM.
We would like to know wich is the best practice to do the transfer: MB1B? 301/311 movement type?
2 - If we decided to create a new storage location with WM. Wich are the recomendations or the points we have to consider:
Under the same Warehouse numer? A knew storage type? Wich are the activities in SPRo?
Thanks in advance for the help
Regards
Enzo

http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
If it is the same physical Warehouse you could use the same Warehouse, otherwise a new or no Warehouse.
If the Storage Locations are near by and stock doesn't cross public roads and it's manually initiated, suggest just use a one step as it's the simplest process.
If there's a significant distance but on-site use two-step or if stock transferred by public roads, use STO.

Create Plant or just separate Storage Location

I am trying to determine where the magical line is to decide whether to establish a separate address location as a different plant or location. My example is not very complex. It is a satellite production location that produces products for use as raw materials for another production facility that assembles and sells the final product. The satellite location will have a separate cost center and will use activity rates and costing sheets for overhead recovery. My inclination is to set the satellite facility as a plant but supply Chain team sees this as overkill and would rather make it simply a storage locations.
Can someone provide a white paper or list of positives and negatives to storage location versus plant? I know some things might involve the following:
1-If valuation of products are different or may at some point involve different values by location, a plant is needed.
2-If products are sold directly from location, plant would make more sense.
3-If inventroy is transferred between locations with differing addresses, various tax and bank reporting could necessitate the use of separate plants.
4-When manufacturing activities exist, a plant is logical.
5-If all purchasing is performed at a central location, a separate plant may not be required for this purpose.
My existing dilemma relates to the fact that we use costing sheets by plant. Without a separate plant, using different storage locations forces me to use the Material Origin Group to dileneate the extra location if I don't want to use the plant based overhead rates. This seems like a violation of best practice and proper use of SAP.

Hi
If you define satellite production location as Storage location you can not do profitable analysis at this unit. My suggestion is activate MRP area at storage location level. So that satellite production unit is treated as separate entity under the same Plant. This will just help you to do the Supply chain activities (purchasing, Sale, Prod and STO) at MRP area level. But Profitability analysis still can be done at Plant level only.
This will solve your point numbers 2, 3, and 4.For material valuation (Point number -1) I think you have to go for split valuation.
Regards,
Velmurugan S

Any delivery note can be created if transfer materil in storage location

Similar Messages

Maybe you are looking for