Any driver for Marvell Libertas (88W8335), aka TENDA TWL541P

After numerous attempts with a TENDA W311U, aka Ralink 3070, and no replies from the Thai support address, I want to know - I have another TENDA, a TWL541P based on the Marvell Libertas 88W8335 chipset - Is there a Mac driver for it? It needs to work on an old G3 with OS X 10.4.11 and 9.2.2. Any help will be appreciated.

I'd give up on the Libertus, see last post here...
http://www.insanelymac.com/forum/index.php?showtopic=86353
Did find a couple for Marvell 88SE61xx, but they require 10.5.2...
http://wiki.osx86project.org/wiki/index.php/3rdPartyDrivers
Possible clues of other wifi devices that use Marvell chipsets...
http://marvell.rapla.net/
When you say 9.2.2, does that mean in Classic under OSX, or native 9.2.2 boot?
If the first, OSX is handling the HW, if the second I think your only hope is an Ethernet->Wifi adapter...
http://www.amazon.com/Belkin-F5D7330-802-11g-Wireless-Ethernet/dp/B00020H1TG
http://www.amazon.com/D-Link-DWL-G810-Ethernet-Wireless-Adapter/dp/B0000CEPCH

Similar Messages

Cant install any driver for Hp NVidia gt230 on Touchsmart 600-1055

Last few years I bought a HP Touchsmart oversea when I travelled to US then I brought it back to Australia. First couple months it was fine then one day I turned on the PC then It is just black screen after the window 7 boot screen then restart after few seconds. It keeps repeating that process unless I go to Safe mode and remove its NVidia driver and replace with window standard driver ( Video Controller VGA compatible) then I can boot up the window normally but cant use any program that require the delicated graphic card. I have tried hard to find its driver from every resources that I can find on the internet including Hp website and NVidia webiste but still again no luck. for 3 years I still cant find the driver for this that can make it working. What happened? is it my graphic card physically fault or because the software isusse? I forgot to mention that I even try to use the DVDs that I orders from HP USA and try to factory recovery but it is still having the same issue. I try to install many different version of window in cluding win 7 32&64 bits, Window 8 pro 64 bits then STILL NO LUCK. So could anyone please tell me what happened and how to fix it cause as I am aware that HP australia not support for HP USA product and I dont want to see my expensive desktop become a brick.
Thanks

Hello Trung_Hau_Le,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues where you cannot use the higher end graphics card installed in your HP TouchSmart 600-1055 Desktop PC. The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Now just because you purchased the computer in Australia does not mean your warranty is not good in the US. I am providing you with a link to theHP Global Warranty and FAQs, which states the following:
HP Global Warranty covers HP products at the level of standard warranty offered in the country in which it is used. For example, a product purchased in country "A" and moved to country "B" receives the current warranty coverage provided by country "B" (if that product is marketed or supported in country B)
This means that your computer receives the same treatment in the US as a computer sold in the US. I would recommend you contact HP Technical Support to have your issue addressed.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Is there any driver for Epson CX5600 and Leopard?

Hi All,
Just looking for Epson CX5600 drivers for Leopard (printer and scanner)
I've tried to install Tiger's driver and does not work.
Any Idea?
Epson have a nice Leopard Support site (http://www.epson.com/leopard), but there is nothing about CX 5600. Ths is one of the most selled printer on Latin America.
Hope someone can help me! Thanks!
Pablo

I´ve received this message from Epson Support.
Thank you for contacting the Epson Connection.
At this time there is no Macintosh OS X 10.5 driver for your Epson product.
Check our Macintosh OS X 10.5 compatibility webpage at
www.epson.com/leopard for updates, as we continue to update drivers.
If your product is not listed there, it is not supported on Macintosh OS X
10.5.
If you require further assistance with this particular issue, please ensure
all of our previous correspondence is contained in your reply, so we can
better track the history of this issue.
If you have a different issue, please submit another E-form via our website
(http://www.epson.com), and we will respond in a timely manner. Thank you
again for contacting Epson.
Red G.
Epson Connection
So... i must wait...
I've tried the default Epson Drivers from Leopard DVD, and they don't work.

I can't find any driver for Pavillion G4-2004TU Win-32 bit

I want to update my graphic driver, but there aren't any for Win-32 bit
Where can I find them?
Please help me

Dear Customer,
Welcome to HP Support Forum
Please Click Here to download the relevant drivers as requested
Note: Just to let you know "INTEL" did not develop a Windows 7 32 Bit Braphics Driver for Notebooks with the
"Pentium N and Celeron N" Processors. You have to run a 64 Bit Operating System on that model.
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

I can not install any driver for any print to my laptop.

I have been trying for months to install a driver for just one printer and we have five or six printers.
My problem is that every time I install a driver it fails and rolls back, everytime. It would just about completely finish installing before rolling back.
My laptop is a Windows Vista Home Premium Service Pack 2.
PS: There were three other users before me that was using this laptop. I know all three of them and none of them know much about computer. So I tryed to clean out all the junk out of it.
I got a little more info for however reads this post. The error that I recieve has no number or error code it just says "Fatal error during installation," but it also has in the title bar this "C:\Users\Justin\AppData\Local\Temp\7z1763\Setup\..\Setup\hpzprl01.exe, which seems like it might help.
Hope that helps.

I figure out what my problem was. Here is what I did: I recheck all of my services and startups. If you need help I'll layout steps for you. Just reply that you still need help.

Time machine does not recognize any drive for initialization

Dear all any body knows how to make time machines recognize my drives during initial setup of the time machine. It used to see my drives; however, I do not know when this conflict happened...i have installed mac parallel and windows vista, and the system seems to work perfect except time machine.?
regards..
knaji

Welcome to Discussions.
Select your Time Machine drive in the finder and do a Get Info (command-i). The format should be Mac OS Extended (Journaled). If it isn't you will need to reformat the drive. This will erase it so copy any files you need from the drive first. Directions for formatting your Time Machine drive are in this article. People with PPC Macs should substitute Apple Partition Map for GUID when following the directions.
If Time Machine doesn't automatically ask you to use the drive you can choose it for Time Machine backups by going to System Preferences > Time Machine > Change Disk.

Is there any driver for an HP Laserjet 5000 printer that will work with OS 10.10.2?

I have an older laserjet printer and since updating to OS 10.10.2 I cannot print. I have been on with HP, and they no longer support this printer, and the latest driver is compatible with OS 10.6. Does anyone know a way to get around this? I really cannot go out and buy another printer, this one is great.
Thanks

Mention you're using a Mac and HP will give up pretty easily. It doesn't matter whether the printer is new or old.
Since the driver you have been using no longer works, did you try OS X's generic PostScript printer driver?
I agree old HP printers are built well and last forever, and no one likes keeping perfectly good printers in service more than I do, but are you absolutely certain a new printer is out of the question? Faster and much more capable laser printers than the LaserJet 5000 are readily available today for less than $100. HP doesn't make them.
Even finding a replacement your toner cartridge for yours must be getting difficult. The street price for that toner cartridge is about $150. HP's list price is well over $200.

HT3986 Windows 7 can not find any driver for my network

I finished installing windows 7 ultimate 64 bit but when I log into windows network is not available and trying to connect ethernet cable does not work either help me please

Welcome to the Apple Support Communities
Have you installed Boot Camp drivers? You need them to make the Wi-Fi and Ethernet cards work.
If you have Snow Leopard, insert the Mac OS X DVD and install the drivers. If you have Mountain Lion or Lion, you have to start into OS X (pressing X key while your computer is starting) and download the drivers on Boot Camp Assistant. See > http://support.apple.com/kb/HT4407 (it applies to Lion and Mountain Lion)

Any CUPS driver for Toshiba Tec B852R

I absolutely need to use a thermal printer Toshiba under Lion. Anyone knows of drivers made for B852R to run on Mac?
Thanks for all the replays

Hi!
> can't find any driver for Win 7 64 bit.
Why you cant find any driver? What do you think could be the reason for this? Is it really so strange?
Let me give you a word of advice: Windows 7 is not on the market as yet and so there are no drivers for Windows 7 available. Thats all!!
You can try the Vista drivers because the most of them also work on Windows 7 but this is all at the moment what you can do.
Bye

Where can I find a 10.5.8 driver for Laserjet 400 m401dne printer?

I'm running OS 10.5.8 on a G5 desktop (tower), and I just bought a LaserJet Pro 400 M401dne and connected it to this Mac with a usb cable. The Mac will print to it using a generic postscript driver automatically chosen by the OS. There is no driver for the LaserJet 400 on the list of drivers available in the OS.
The installer disk for the printer doesn't offer any driver installation for 10.5.8. It just says that the DVD software won't work with this version of the Mac OS.
This printer is capable of doing duplex (double-sided) printing, which is the main reason I bought this printer, but I am not given that option in any of the dialogue boxes for the printer when I hit PRINT. Apparently the generic postscript driver doesn't recognize the duplex printing feature of the printer. As a result I cannot print on both sides of a page.
I went to the HP website and could not find a LaserJet 400 driver for OS 10.5, nor do I see any driver for it on the Apple website. The free Gutenprint driver utility lists many LaserJet models, but not the 400.
Does anyone know where I might find a driver for this LaserJet 400 that will enable it to do double-sided printing in OS 10.5.8?
Tom

You solved the problem, BDAqua! I downloaded the driver for the LaserJet 500 from the HP website, as you suggested, and I found that it runs my LaserJet 400! And now I have the double-sided printing capability that I wanted. I just now printed out some double-sided pages to prove it.
I never even considered that a driver for a different HP printer might run this one, but it does. It offers options for printing color that this printer does not have, since the HP 400 is only a black-and-white (or grayscale) printer, and the driver thinks it is running a color printer, but I can simply ignore those.
So the HP Color LaserJet 500 driver for OS 10.5.8 is able to run the HP LaserJet 400 monochrome printer. Whodathunk!
Other HP LaserJet 400 owners running 10.5.8 take note!
Thank-you very much BDAqua!
Tom

Has anyone found the correct driver for Canon MF4018 printer?

I have tried installing all of the available drivers including MF4010 which other users have reported works- I keep getting Error-50 and cannot print anything. If anyone has used any driver for this printer that is compatible with my macbook pro - that could help me out a lot.

Since it's a 10.8 issue, why not place a new post in the 10.8 usage forum?
DALE

Driver for HP CALPAD 200

Hi,
I bought a HP CALCPAD 200 this morning.
I do not find the driver on HP website (windows 7 version)
The user's guide gives a broken link for drivers : http://drivers.hpcalculating.com.
On HP support website, I do not find any driver for HP CALPAD 200 !
HP support has removed the driver for this product ?
Could you please help me ?
Thanks
Best regards and Merry Christmas to all

Hi,
You can post your question on this forum:
http://h30499.www3.hp.com/t5/Calculators/bd-p/bsc-408
HTH
Note: I do not work for HP, I just like playing with calculators :-)

Wifi driver for model HP 15-R264TU FOR WINDOWS 7 32 BIT

Hi,
I need driver link for wifi of my laptop, I dont know which will be working ??
Am using Windows 7 32 bit nd Model is Hp 15-r264tu...I dont know what is wrong wid Hp website not showing any driver for this model, Asking Select your model again and again..... do fix it Asap.

Hi:
I don't know what model wireless network card your notebook uses.
Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category. The network controller device will have a little ! mark next to it.
So, find the network controller device, click on that and then click on the Details tab.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (Hardware ID's).
Post the top string of characters you see in the window.

Windows does not recognize driver for pci-4461

Hello,I am currently running windows xp with labview 7.0 on my computer. Recently trying purchased and trying to install PCI-4461 Audio Analyzer PC card. I downloaded the latest driver 9.0.2 off the NI website. After the install I verified the driver exist by using the Measurement & Automation tool. However, window does not recognize any driver for the hardware. When I point it to the directory where the driver is "suppose" to exist, windows gives me an error message saying that the driver does not exist or is corrupted. I've tried uninstalling and reinstalling several times. Has anyone ran into this problem and can give me some advise? I know that the version on DAQmx 9.0.2 is not compatible with the version of labView I am running. However it should not affect windows from locating and installing hardware. Thank you,Ruth

Hi Ruth,
Did you install the PCI-4461 card in your computer before or after you installed the DAQmx 9.0.2 drivers? It would be best to install the drivers first and then the card. Windows XP will pop up the New Hardware Wizard, saying it detected new hardware. Click Next, and then to Search for Drivers Automatically. Do not try to navigate and select the appropriate driver folder. As long as the drivers are installed correctly Windows will be able to find the correct driver automatically.
You can also remove the PCI-4461 card and try it in a different PCI slot. This will cause the new hardware wizzard to appear on the next restart.
Eric S.
Eric S.
AE Specialist | Global Support
National Instruments

Cannot load device driver for DVD/CDRW - Satellite 1110

I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CDs. It is reported as a MAT****A UJDA730 DVD/CDRW but the device status comes up as:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
I have tried uninstalling and reinstalling the device but the error just returns. I cannot find a driver for it either on the manufacturer's web site or Toshiba's. I don't want to use the Product Recovery CD-ROM as it implies I will lose all software and data on the hard drive.
Can someone advise how to recover from this situation?
Thanks

Hi
Firstly you dont any driver for the CD/DVD drive. The drive uses the standard Windows OS driver and its not necessary to install it additional.
I assume there could be something wrong with the registry entry.
Please check this forum posting:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13843
The user has used the instruction which was offered on the Microsoft site.
This should help.
Please post again if this method was successful.

Any driver for Marvell Libertas (88W8335), aka TENDA TWL541P

Similar Messages

Maybe you are looking for