Any email problems after updating to OS7

Is anyone experiencing problems with email after updating to OS7 on your iphone?

Yes. My girlfriend and I both have iPhone4. We got the update yesterday. No problem for me, everything seems great up to now. But she lost her "inbox" in Mail. Everything seems to be just as it was before, except that she has no "inbox". What's that?

Similar Messages

Configuration problem after updating to OS7

I have done the update to OS7 to my ipad. then the new configuration starts. but i cannot finalize it, also the synchronisation with itunes worked. the screen "connect to itunes" does not disappear. also everthing is done. can you help?

Reset: Hold down the home button along with the sleep/wake button until you see the apple, then let go.

Problems after updating to OS7

Last night my iPad updated itself to system 7. Now, when using the iPad, everything respond very slowly, but the big problem is the keypad, to try to write anything is a nightmare, the reaction time for each key is the about 20 seconds.
What is the problem and what can I do?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Anyone has any problem after updating to iSO 4.3.1 ?

anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.

My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it.

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

Performance problems after Update from 7.6.00.37 to 7.6.03.15

Hi,
after the Update from 7.6.00.37 to 7.6.03.15 in our live system we noticed a lot of performance problems. We have tested the new version before on our test system, but there don't noticed effects like this.
We have 2 identical systems (Opteron 64 bit, openSuse 10.2) with log shipping between them. We updated first the standby system, switched from online to standby (with copy of cold log) and started the new server as online system. After that we run a complete backup (runtime: 1 hour) for starting a new backup history and for activating autolog. Then
With the update we changed USE_OPEN_DIRECT to YES, but the performance of the system was very slow afterwards. After the backup it remains at a high load average (> 10, previous system had about 2-4), with nearly 100% of CPU usage for the db kernel process.
Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but periodically rises up to a load average of 6 and slow down the performance of various applications (somebody says about 10 times slower). Here we also noticed a high usage (now 200-300%) of the db kernel process.
Our questions are:
1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
2. Are there any other (new) parameters, which can help? Maybe reducing MAXCPU from 4 to 3 for reserving capacities for the system (there is only one maxdb instance running)?
3. Is the a possibility to switch back to 7.6.00.37 (only for worst case)?
I have made some first steps with x_cons, but don't see any anomalies on the first look.
Regards,
Thomas

Thomas Schulz wrote:>
> > > Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but
> >
> > What is it about this parameter that lets you think it may be the cause for your problems?
> After changing it back to NO, the system runs better (lower load average) than with YES (but much slower than with old version!)
Hmm... that is really odd. When using USE_OPEN_DIRECT there is actually less work to do for he operating system.
> > > Our questions are
> > >
> > > 1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
> >
> > Yes - of course. Changes are what Patches are all about!
>
> Are there any known problems with updating from 7.6.00.37 to 7.6.03.15?
Well of course there are bugs that have been found inbetween the release of both versions, but I am not aware of something like the performance killer.
We will have to check this in detail here.
> > > I have made some first steps with x_cons, but don't see any anomalies on the first look.
> >
> > Ok, looking into what the system does when it uses CPU is a first good step.
> > But what would be "anomalies" to you?
>
> Good question! I don't really know.
Well - then I guess 'looking at the system' won't bring you far...
> > Do you use DBAnalyzer? If not -> activate it!
> > Does it gives you any warnings?
> > What about TIME_MEASUREMENT? Is it activated on the system? If not -> activate it!
>
> OK, that will be our next steps.
Great - let's see the warnings you get.
Let us also see the DB Parameters you set.
> > What parameters have changed due to the patch installations (check the parameter history file)?
> >
> > What queries take longer now? What is the execution plan of them?
>
> It seems to happen for all selects on tables with a lot of rows (>10.000, partially without indexes because automatically generated). With the old version we had no problems with missing indexes or the general performance. Unfortunatly it is very difficult to extract some sql statements out of the JBoss applications. But even simple queries (without any join) runs slower, when the load average rises over 4-5.
Hmm... the question here is still, if the execution plans are good enough to meet your expectations.
E.g. for tables that you access via the primary key it actually doesn't matter how many rows a table has (not for MaxDB at least).
> > BTW: how exactly do the tests look like that you've done on the testsystem?
> Usage over 6 weeks with our JDBC development environment (JBoss), backup and restore with various combinations of USE_OPEN_DIRECT and USE_OPEN_DIRECT_FOR_BACKUP.
Sounds like the I/O is your most suspect aspect for overall system performance...
> > Was the testsystem a 1:1 copy of the productive machine before the upgrade test?
> No - smaller hardware (32 bit), only 20% of data of the live system, few db users and applications.
>
> > How did you test the system performance with multiple parallel users?
> Only while permanent development with the 2-3 developers and some parallel tests of backup/restore. Unfortunately no tests with many users/applications.
Ok - so this is next to no testing at all when it comes to performance.
> An UPDATE STATISTICS over all db users seems to change nothing. At the moment the system remains markedly slow and we are searching for reasons and solutions. Another attempt will be the change of MAXCPU from 4 to 3.
Why do you want to do that? Have you observed any threads that don't get a CPU because all 4 cores are used by the MaxDB kernel?
regards,
Lars

Mythbackend problem after update

I am facing the following problem after updating mythtv.
The installed packages are:
sip03ds ~ $ sudo yaourt -Ss mythtv | grep installed
extra/mythmusic 0.21-3 [installed] (mythtv-extras)
extra/mythtv 0.22-3 [installed] (pvr)
extra/mythvideo 0.21-2 [installed] (mythtv-extras)
extra/nuvexport 20090413-1 [installed]
after updating mythtv the backend refuses to start. Even though is displays that it is starting normally:
sip03ds ~ $ sudo /etc/rc.d/mythbackend start
:: Starting MythTV Backend [DONE]
sip03ds ~ $
for some reason it shows that the backend is unavailable.
sip03ds ~ $ mythfrontend
2009-11-21 10:32:59.615 mythfrontend version: tags/release-0-22 [0.22] www.mythtv.org
2009-11-21 10:32:59.668 Using runtime prefix = /usr
2009-11-21 10:32:59.668 Using configuration directory = /home/sip03ds/.mythtv
2009-11-21 10:33:00.548 Empty LocalHostName.
2009-11-21 10:33:00.549 Using localhost value of htpc
2009-11-21 10:33:00.570 New DB connection, total: 1
2009-11-21 10:33:00.587 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.588 Could not open settings file /home/sip03ds/.mythtv/config.xml for writing
2009-11-21 10:33:00.588 Closing DB connection named 'DBManager0'
2009-11-21 10:33:00.631 ScreenSaverX11Private: Gnome screen saver support enabled
2009-11-21 10:33:00.667 DPMS is active.
2009-11-21 10:33:00.710 Primary screen: 0.
2009-11-21 10:33:00.719 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.723 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:00.823 MythUI Image Cache size set to 20971520 bytes
2009-11-21 10:33:00.824 Enabled verbose msgs: important general
2009-11-21 10:33:00.889 Starting mythlcdserver
QWidget: Cannot create a QWidget when no GUI is being used
2009-11-21 10:33:01.408 Connecting to lcd server: localhost:6545 (try 1 of 10)
2009-11-21 10:33:01.911 Connecting to lcd server: localhost:6545 (try 2 of 10)
2009-11-21 10:33:02.412 Connecting to lcd server: localhost:6545 (try 3 of 10)
2009-11-21 10:33:02.913 Connecting to lcd server: localhost:6545 (try 4 of 10)
2009-11-21 10:33:03.414 Connecting to lcd server: localhost:6545 (try 5 of 10)
2009-11-21 10:33:03.915 Connecting to lcd server: localhost:6545 (try 6 of 10)
2009-11-21 10:33:04.416 Connecting to lcd server: localhost:6545 (try 7 of 10)
2009-11-21 10:33:04.917 Connecting to lcd server: localhost:6545 (try 8 of 10)
2009-11-21 10:33:05.417 Connecting to lcd server: localhost:6545 (try 9 of 10)
2009-11-21 10:33:05.918 Connecting to lcd server: localhost:6545 (try 10 of 10)
2009-11-21 10:33:06.471 Primary screen: 0.
2009-11-21 10:33:06.473 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:06.475 Using theme base resolution of 800x600
2009-11-21 10:33:06.500 LIRC, Error: Failed to connect to Unix socket '/var/run/lirc/lircd'
eno: No such file or directory (2)
2009-11-21 10:33:06.500 JoystickMenuThread Error: Joystick disabled - Failed to read /home/sip03ds/.mythtv/joystickmenurc
2009-11-21 10:33:08.531 Using the Qt painter
2009-11-21 10:33:08.535 Removing stale cache dir: /home/sip03ds/.mythtv/themecache/MythCenter-wide.1280.800
2009-11-21 10:33:08.557 Loaded base theme from /usr/share/mythtv/themes/MythCenter/base.xml
2009-11-21 10:33:08.891 Loaded base theme from /usr/share/mythtv/themes/default/base.xml
2009-11-21 10:33:08.897 New DB connection, total: 2
2009-11-21 10:33:08.897 New DB connection, total: 3
2009-11-21 10:33:08.902 New DB connection, total: 4
2009-11-21 10:33:08.906 Current MythTV Schema Version (DBSchemaVer): 1244
2009-11-21 10:33:08.910 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.926 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.927 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:09.589 Desktop video mode: 1280x800 59.9125 Hz
2009-11-21 10:33:10.602 Registering Internal as a media playback plugin.
2009-11-21 10:33:10.958 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythmusic.so: undefined symbol: _ZNK15ComboBoxSetting9classNameEv
2009-11-21 10:33:10.958 Unable to initialize plugin 'mythmusic'.
2009-11-21 10:33:11.230 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythvideo.so: undefined symbol: _ZNK7Setting9classNameEv
2009-11-21 10:33:11.230 Unable to initialize plugin 'mythvideo'.
2009-11-21 10:33:11.248 MMUnix::AddDevice() Error: failed to stat /dev/bdi,
eno: No such file or directory (2)
2009-11-21 10:33:11.259 MMUnix::AddDevice() Error: failed to stat /dev/power,
eno: No such file or directory (2)
2009-11-21 10:33:11.271 Loading window theme from /usr/share/mythtv/themes/MythCenter/menu-ui.xml
2009-11-21 10:33:11.377 Loading menu theme from /usr/share/mythtv/themes/defaultmenu//mainmenu.xml
2009-11-21 10:33:11.381 Found mainmenu.xml for theme 'MythCenter'
Any ideas or logs where to check would be more that appreciated.
Thanks
Last edited by sip03ds (2009-11-21 09:40:36)

I removed all the plugins and reinstalled mythtv. Configured it as advised on the wiki (without dropping the database schema) but the server is still not starting up correctly.
I found out that the server is starting and and stopping when I run:
sudo /etc/rc.d/mythbackend start
when I start the front end, the front end cannot connect to the back end because it is unavailable.
in case I start the server manually:
sudo mythbackend
I am able to connect via mythfrontend and mythtv is working correctly. Any suggestions to change the daemon script ?
Last edited by sip03ds (2009-11-21 22:56:51)

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Unlock problem after update to iOS 7.1.1

I'm wondering is anyone of you encounter above mentioned problem after update to iOS 7.1.1.
Usually will switch off the phone during sleeping time, today woke up urn it on and wanted to check mail, the screen is freeze when enter the passcode.
Even try calling in with another phone also unable to get through. Passcode unable to key and stop at the 'enter passcode' screen.
After awhile it show the "apple" icon and turn off.
Any solutons to solve it?

iPhone is unresponsive and displays the Apple Logo
Review this article: iOS: Unable to update or restore.

Problem after update software 5700xm

I'm facing some problem after updating my 5700xm from v3.27 to v 03.83.1 22-06-07.
1. when opening the music player when the open progress is appear it came out so long untill i have to switch it off and on it again then when i open the music player it goes OK.
2. Refreshing music library, when i try to update/refresh to find new music after recived bluetooth it takes to long to find like 1hr and at the end i have to stop it. Also no new music found i'v done it many times.
3. After all the problem came out, i thought that maybe it will solve if i just try restore the phone to default factory setting, so i back up phone memory to mmc and then press *£7370£, so it restart and appear installing it took long time to install and at the end came out masage "some application are unable to install....." then i try to restore the phone memory, but it like the restore can't function well or maybe don't restore at all b'cos all my application that I install erlyer not fuction, all my contac are lost so do massege....
So do any body got the same prob as i am...????
Can I down grade to the erlyer version????
Any body please help give some oppinion to solve this prob so that i can sleep well....

Hello EveryBody
To update your Nokia 2700, DON'T USE "nokia software update" directly.
You'll have to install NOKIA OVI SUITE, then sign in with your account ou register.
Afterwards update your 2700 via the update option of OVI SUITE.
I just tested it and it works

Problem after update 10.5.5 and coolbook

Hi, i have a very big problem after update tp 10.5.5 in my macbook air.
i do the update with coolbook active.... and when restart... the system dont pass over 800mhz at 50ºC and all the system go very slow.
i tried to active again coolbook, restart, but coolbook dont work....
so now i have that problem.... my 1,8 macbook air dont pass over 800 mhz...
what can i do??

I'm not familiar with Coolbook, so can't really offer any help there but, have you tried disabling on removing Coolbook to see how your Air runs?
If the Air runs ok without Coolbook installed, there's your problem, if it still runs at a max of 800Mhz, contact Apple.

Problem After Update Kernel Version.

I have Problem after update my Xperia Z kernel version. When I upload or share some photos using "Xperia For Facebook" it is start to upload and finish without any problem. But the problem is i Can't see those photos in my Facebook Account .
pls help me.

*Moved to Android development*
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Any email problems after updating to OS7

Similar Messages

Maybe you are looking for