Any error come oracle 11g r1 n 11g r2 installed in same ORACLE_BASE

Hello ,
if I had installed oracle 11g r2 in same oracle base where oracle 11g r1 was already existing,,,ll there b any problem going to occur .

Sahil Soni wrote:
Thanx Mr. Bakker ,
but as I had installed oracle 11g r1 and oracle 11g r2 in same ORACLE_BASEEach installation should be in its own directory, indicated by ORACLE_HOME. Normally, the two ORACLE_HOME directories would be under the same ORACLE_BASE directory.
my oracle 11g r1 database was not getting up but oracle 11g r2 database was connecting properly using sysdba till yesterday and today i found that oracle 11g r2 database is also not able to coonect to sysdba and giving me error
ORA-12547: TNS:lost contact.
What is the reason behind this?There could be all kinds of things going on here. What is your OS? What is the value of the ORACLE_HOME and ORACLE_SID environment variables for the process trying to connect? Are you trying to connect from the same machine that is running the database? EXACTLY how are you trying to connect?
Best if you log on to the server as an account that is a member of the DBA (ORA_DBA if Windows), then fire up a command prompt. Copy the following and paste it into your command prompt:
env | sort
sqlplus / as sysdbaThen copy the results and paste back here.

Similar Messages

ORA-12541: TNS:no listener, (error, in oracle 11g for window 7, 64 bit)

ORA-12541: TNS:no listener, error, in oracle 11g for window 7, 64 bit
While connecting as localhost is pretty well.
but command: sqlplus username@'192.168.52.178:1521/orcl' on the same machine is producing above mentioned error on oracle 11g for window 7, 64 bit.

user11225434 wrote:
Thax sir for your kind concern of my problem. Answers of your quaries regarding my question as follows
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 05-AUG-2013 09:37
:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                05-AUG-2013 09:31:09
Uptime                    0 days 0 hr. 6 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\eee\product\11.2.0\dbhome_5\network\admin\liste
ner.ora
Listener Log File         c:\app\eee\diag\tnslsnr\eee-THINK\listener\alert\log.x
ml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.52.170)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orclxe" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
Service "orclxeXDB" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
The command completed successfully
# listener.ora Network Configuration File: C:\app\eee\product\11.2.0\dbhome_5\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\eee\product\11.2.0\dbhome_5)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\eee\product\11.2.0\dbhome_5\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.52.170)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\eee
3. My ip is static 192.168.52.170 and window 7 prof. is there.
4. Sir i have tested the remote connection with firewall configuration is off.
Hopefully this info is useful.
but command: sqlplus username@'192.168.52.178:1521/orcl'
NOTE the difference in IP#s above; 192.168.52.170 vs. 192.168.52.178

Can I stop batch reading, if any error comes in a batch, in File Adapter

Hi All,
I am reading files in batches of 100 lines as there are 1000 records. Can I stop further reading of records from a file, If any error comes in any batch.
e.g. If my file adatpter is readinf 101 lines, if any error comes in this line, then it should stop reading line 102 and so on.
Regards

Hi Vikas,
I am not sure what you mean exaclty by stop reading - would you be fine if the other lines are rejected till end of file, if an error is encountered?
Then you can achieve that by ensuring that your schema does not have nxsd:uniqueMessageSeparator="${eol}" in the schema element.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_file.htm#CACEGBFD
I am not entirely sure if that would be a good design decision though.
Regards,
Shanmu.
Edited by: sthiagar on Feb 5, 2010 9:23 PM

Oracle 11g and 12c on same windows 7 machine

Hi folks,
Want to try out 12c on my windows 7 laptop but still want to keep my 11g database.
Anyone tried running Oracle 11g and 12c on same windows machine?
Any links or guidelines are appreciated
Thanks

you won't be the first or the last person to try it.
this question can be easily answered but why question something that it's easier to test by yourself?
My advice: Try and if you have problems then question us.

Errors in Oracle 11g R2 Grid Infra Installation

Hi all,
I went through the steps to install Oracle 11g R2 Infrastructure on RHEL 5.2 (32-bit) in a couple of Vmware machines.
- As I relied on the Vmwaretool for time sync, I didn't configure SNP.
- As I don't have a DNS server, I configured the scan-rac in /etc/hosts.
I know in production this is wrong, but for this testing env it is Ok (according to http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVMwareServer2.php)
All the configuration went Ok and the OUI went on successfully till
it reached to the last step: "Oracle Cluster Verification Utility" which, as expected, failed.
It generates the following long and complicated log: http://www.ahmedbaraka.com/temp/installActions.txt
My question is: Did all the errors in the log result only from the SNP and SCAN issues? Is there any other discovered issues?
Thanks in advance.

this could be just from ntp.
The following note might be of assistance:
CTSSD Runs in Observer Mode Even Though No Time Sync Software is Running [ID 1054006.1]

Assign ACL Error in Oracle 11g R1

Hi,
     I am Using Oracle 11g Database Release 1 I have created a ACL in my Database, now I am trying to assign the acl using the below mentioned pl/sql script
begin
     dbms_network_acl_admin.assign_acl (
          acl => 'utlpkg.xml',
     host => 'domainnet.com',
     lower_port => 1,
     upper_port => 10000);
          end;
commit;
Error is
Error at line 1
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 477
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 410
ORA-06512: at line 2
The same Script I have run in another database it is working fine…
I don’t know what is wrong ….
Please advice ….
Thank You
SHAN

Please, have a look to the following metalink note
Ora-1403 When Trying to Create a Network Access Control List*
Doc ID: 854083.1*
Note, Only one ACL can be assigned to any host computer, domain, or IP subnet, and if specified, the TCP port range - from the doc here
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_networkacl_adm.htm#BABDIGJC
Furthermore, it looks like your host variable is a domain name, did you try to use a wildcard i.e. *.domainnet.com or give the exact host name ?
Nicolas.

Java Mail throws Connect failed error in Oracle 11g Enterprise Edition

Hi,
I am using Oracle 11g Enterprise edition.I have a java class which is used for reading outlook 2010 inbox and download attachments from mails .For Connecting to OutLook from oracle i am using "POP3S" protocol in my java class. Which is working fine until my database is oracle-11g standard edition. Last week we are upgraded our database from oracle 11g standard edition to oracle 11g enterprise edition after that i can't connect to mail server through my java class which throws an error as follows.
DEBUG: setDebug: JavaMail version 1.4.4
DEBUG: getProvider() returning javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]
DEBUG POP3: mail.pop3s.rsetbeforequit: false
DEBUG POP3: mail.pop3s.disabletop: false
DEBUG POP3: mail.pop3s.forgettopheaders: false
DEBUG POP3: mail.pop3s.cachewriteto: false
DEBUG POP3: mail.pop3s.filecache.enable: false
DEBUG POP3: mail.pop3s.keepmessagecontent: false
DEBUG POP3: mail.pop3s.starttls.enable: true
DEBUG POP3: mail.pop3s.starttls.required: false
DEBUG POP3: mail.pop3s.apop.enable: false
DEBUG POP3: mail.pop3s.disablecapa: false
DEBUG POP3: connecting to host "194.42.133.180", port 110, isSSL true
javax.mail.MessagingException: Connect failed;
nested exception is:
     javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:210)
     at javax.mail.Service.connect(Service.java:295)
     at javax.mail.Service.connect(Service.java:176)
     at GetNoonReport.Connect2Mailserver(GetNoonReport:338)
     at GetNoonReport.ReadMail(GetNoonReport:103)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:501)
     at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1025)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1038)
     at com.sun.mail.util.SocketFetcher.configureSSLSocket(SocketFetcher.java:507)
     at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:238)
     at com.sun.mail.pop3.Protocol.<init>(Protocol.java:107)
     at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:261)
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:206)
     ... 4 more
Is Oracle Enterprise Edition supports "POP3S" protocol?, Or Enterprise edition needs any additional configuration for establishing outlook connection with "pop3s" ?.
Any help is appreciated
Regards ,
Nisanth

907833 wrote:
Hi,
I am using Oracle 11g Enterprise edition.I have a java class which is used for reading outlook 2010 inbox and download attachments from mails .For Connecting to OutLook from oracle i am using "POP3S" protocol in my java class. Which is working fine until my database is oracle-11g standard edition. Last week we are upgraded our database from oracle 11g standard edition to oracle 11g enterprise edition after that i can't connect to mail server through my java class which throws an error as follows.
I suspect root cause is with Java not Oracle.
Oracle RDBMS does NOT speak any "protocol" except SQL natively.

Error connecting oracle 11g through SQL Developer

i am using SQL Developer to connect to oracle 11g which is installed to another machine in same network
means i am using a client machine to get connected to oracle installed to host machine through SQL Developer
iam getting this error
network adapter could not establish the connection
vendor code 170002
my listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = his-zoheb.PCSTECH.COM)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
my tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = his-ansari.pcstech.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
iam not understanding what is problem
please somebody help

I would say it's vendor code 17002 (not 170002). And such a message is thrown by SQL Developer , unfortunately very generic for any kind of connection problems.
Start sqlplus and try to connect, very likely you get a better error message.
Recently I had such a connection problem and the reason was - No Listener.
Werner

ODBC error in oracle 11g

Hi all.
I have installed oracle 11g release 2 64 bit on my system and also installed Informatica powercenter 9.1. the informatica repository is in oracle database. I have configured informatica perfectly since i could run workflow when connecting to flat files etc. i am having problem when i am trying to connect informatica to oracle source system and receiving following error the oracle(tm) client and networking components were not found. I read in many forums posts and realized i should install oracle client. I am encountering issues once the client is installed on my system. the issue is that my repository and integration server stops in informatica powercenter. the error log says TNS could not be resolved. then i tried to log in to database server "sys as sysdba" i am receiving error "ORA-01031: insufficient privileges ". I have done following things to resolve my error
1) checked my user is in ora_dba group
2) checked sqlnet.ora file SQLNET.AUTHENTICATION_SERVICES= (NTS)
I dont know where to start to now fix this error. I have some questions Is there a problem installing both server and client on the same machine.
Your help will be greatly appreciated.
P.s I am not sure whether this to redirected to informatica forums or oracle forums so my apologizes if i am in a wrong place.
Regards
Rajkumar

Hi Rajkumar,
I suspect you're actually using 32 bit components, as I've only ever seen the error message you've posted "oracle(tm) client and networking components were not found" come from Microsoft ODBC or OLEDB provider for Oracle, and those only come in 32 bit. The fact that they got loaded in the first place and didnt find the client indicates the process is 32 bit.
You'll first need to determine for sure whether the process that needs connectivity is 32 bit or 64 bit, then install that bit-ness of Oracle client. You can also install both a 32 bit and a 64 bit client, and in some cases you need both. If you're running it ON the database machine and already have a 64 bit database, that already includes a 64 bit client.
In either case, you can probably just go with the 11201 client.. Here's the link, click "see all" to get to the client download:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Hope it helps,
Greg
Edited by: gdarling on Oct 15, 2012 7:40 AM

DBCA fails with java.lang.UnsatisfiedLinkError: Can't load library: /u01/oracle/prod/tech_st/product/11.2.0/db_1/oui/lib/linux/liboraInstaller.so Error in Oracle 11g

Hi,
After ORACLE 11G software installation i tried to change the ORACLE_HOME directory.
OS : RHEL 4.5
DB : 11.2.0
Previous Home Location :
[oracle@localhost ~]$ echo $ORACLE_HOME
/u01/oracle/prod/tech_st/product/11.2.0/db_1
Current Home Loc:
[oracle@localhost ~]$ echo $ORACLE_HOME
/u01/oracle/db/tech_st/product/11.2.0/db_1
When i am trying the DBCA command i am getting the below error:
[oracle@localhost ~]$ dbca
java.lang.UnsatisfiedLinkError: Can't load library: /u01/oracle/prod/tech_st/product/11.2.0/db_1/oui/lib/linux/liboraInstaller.so
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1650)
        at java.lang.Runtime.load0(Runtime.java:769)
        at java.lang.System.load(System.java:968)
        at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:387)
        at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:122)
        at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:201)
        at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
        at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:492)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:266)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:240)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:189)
        at oracle.sysman.assistants.util.InventoryUtil.getOUIInvSession(InventoryUtil.java:346)
        at oracle.sysman.assistants.util.InventoryUtil.getHomeName(InventoryUtil.java:87)
        at oracle.sysman.assistants.util.OracleHome.getInventoryHomeName(OracleHome.java:1023)
        at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:798)
        at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:257)
        at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveHost.java:54)
        at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:164)
        at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:112)
        at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:184)
Exception in thread "main" java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
        at java.lang.Runtime.loadLibrary0(Runtime.java:822)
        at java.lang.System.loadLibrary(System.java:993)
        at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:405)
        at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:122)
        at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:201)
        at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
        at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:492)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:266)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:240)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:189)
        at oracle.sysman.assistants.util.InventoryUtil.getOUIInvSession(InventoryUtil.java:346)
        at oracle.sysman.assistants.util.InventoryUtil.getHomeName(InventoryUtil.java:87)
        at oracle.sysman.assistants.util.OracleHome.getInventoryHomeName(OracleHome.java:1023)
        at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:798)
        at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:257)
        at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveHost.java:54)
        at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:164)
        at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:112)
        at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:184)
[oracle@localhost ~]$
I tried all possible ways with google help but still i am facing the same issue.Kindly check and suggest to solve the issue.
Thanks in advance.
Vijay.

Hi all,
I give you the clear details about the issue what i am currently facing,
1. I installed the 11g (11.2.0) database alone(No EBS) in my local vmware machine.
2. Created my ORACLE_HOME under /u01/oracle/prod/tech_st/product/11.2.0/db_1 directory after that i tried to change my home location from /u01/oracle/prod/tech_st/product/11.2.0/db_1 location to /u01/oracle/db/tech_st/product/11.2.0/db_1 location, like created /u01/oracle/db directory and moved files from /u01/oracle/prod location.
3. I changed my bash_profile and exported home with the modified location also deregistered an old home and registered the new home.
4. When i am issuing echo $ORACLE_HOME it is showing the current home location and ORACLE_SID is same what i created before.
5. But when i am trying to create one more db using DBCA utility it is through the above error.
Please suggest me is it possible to change the location after db creation or any extra steps i have to do for this issue.
Thanks.

Cannot load any data from Oracle 11G data base

Hi Gurus!
We using SAP BI 7.0.
We have a source system, which is an Oracle Data warehouse based on Oracle 11G data bases.
We created the source system in the BI without any problem.
The connection is open to the Oracle databases.
We created data source in the BI (trn. RSA1), and when we would like to Read Preview Data (Display data source, Preview tab) we can't see anything.
The system is working, in trn. SM50 we see the process is runing, but we can't see any data (we wait more than 5000 sec.)
When we tried data load from the source system, we got a short dump with time-out (after 50000 sec.)
Summarize:
- the connection to the source system is OK,
- the process is running
- we can't see any Preview data
Can somebody help us?
Thank you.
Best regards,
Gergely Gombos

We really need to know what errors or warnings the Cache Agent is reporting in the TimesTen ttmesg.log files, when an autorefresh fails, to be able to give advice. If the size of the datastore segment is 512MB (though you don't say how that is divided between Perm, Temp and Log Buffer) but you're only using 30MB of Perm, then on the face of it, it's not a problem in running out of memory. You say autorefresh doesn't complete when "there are a lot of updates on cached tables" - do you mean updates being done directly on the rows in the TimesTen cachegroups, by users? If so, it sounds to me like you have locking contention between the user updates, and the autorefresh mechanism trying to bring new rows in from Oracle. Again, the ttmesg.log should spell this out.

ASM option comes with Standard Edition Oracle 11g R2 Install or not?

Hello,
I just wanted to make sure before installing the Oracle 11g R2 software, whether ASM (Automatic Storage Management) is available for Standard edition or not?
Thank you for your help.
Ally.
Edited by: Ally_p on Jun 17, 2010 1:58 PM

Hi Ally,
based on:
http://www.oracle.com/us/products/database/product-editions-066501.html
I think it is included. See Automatic Storage Management section!
Regards,
David
OCP 9i / 10g / 11g
https://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Oracle 11g R2 install problem on Windows Server 2008 R2 SP1

Hi all,
Trying to install the Oracle 11g R2 database onto Windows Server 2008 R2 SP1.
I get as far as running the setup and a black window flashes up on the screen and disappears.
The log files only show the following:
Using paramFile: C:\Temp\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The number of files bootstrapped for the jre is 0.
The number of files bootstrapped for the oui is 0.
I've tried running setup -debug from the command line but no further information is logged.
Any help in troubleshooting further is appreciated.

That is the complete log file. No error messages or further information is given.
I'm not sure how to check:
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
I have checked on:
http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm
The server meets all the hardware requirements. The default file share is accessible and it is running a supported browser. The installer is being run with Admin rights. I'm not sure what else I need to check.

ORACLE 11G XE INSTALLED SUCCESSFULLY BUT NOT DISPLAYING IN BROWSER

WINDOWS 7, GOOGLE CHROME, ORACLE 11G XE IS INSTALLING SUCCESSFULLY BUT WHEN I START IT IN THE BROWSER IT IS NOT DISPLAYING IN THE BOTTOM IT IS SHOWING WAITING FOR 127.0.0.1.....
WHEN I GO TO RUN SQL COMMAND LINE AND WRITE CONNECT AND GIVE USER NAME AND PASSWORD IT IS SHOWING CONNECTED

Welcome to the forums - there is no need to SHOUT.
Pl identify the version of Windows 7, along with whether it is 32-bit or 64-bit. Do you meet all of the software requirements in the Install Guide ? http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm
Have you completed all of the steps in the guide ? If so, did the steps complete without any errors ?
HTH
Srini

Oracle 11g R2 Install on Windows 7 64 bit setup.exe does not work.

Hi
I am trying to install Oracle 11g R2 on my Windows 7 Ultimate 64 bit. When I execute setup.exe as Administrator the command window flashes and exits. I could not even see what the message is. Also tried command prompt. Can anyone help me resolve this issue?
Appreciate your support.
Regards

user1484609 wrote:
Installation Successful after executing the install from C:\temp and not within users. Even if you execute as Admin Oracle Install does not have access to the folders in C:\Users...
Finally the install is successful.Congratulations.
And thank you for posting your solution. The security issue was quite a surprise to me as well, although it ties into a PC World article I read today.
To continue, please make sure you have a static IP address. If your system uses DHCP, that may mean setting up Loopback Adapter, configuring a static IP address other than 127.0.0.1 for that (for example you can use 192.168.123.101), and updating C:\windows\system32\drivers\etc\hosts. (note - no 3 char 'type on the hosts file) to include an entry like '192.168.123.101 myhost.example.com myhost', and perhaps setting your ORACLE_HOSTNAME variable. This is all described well in the Install documentaiton at http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#BABIAEEC

Any error come oracle 11g r1 n 11g r2 installed in same ORACLE_BASE

Similar Messages

Maybe you are looking for