Any expects on creating jpgs for web publishing?

I have made a great diagram in Illustrator CS2 but unfortunately it looks muddy in the color areas when I've uploaded it to my website www.dartdiagram.com. The jpg file is very sharp and looks great until it's uploaded to my server. I use gradient to make it look better

Jesper,
Looking at the image again, I believe the (remaining) muddiness is caused by resampling of the JPEG image; resampling creates dirty specks and the like.
Are you sure the image dimensions have not been changed from original artwork over image creation to final web use, possibly twice? The image itself seems to be a good 1% from being circular (higher/narrower), and its appearance on the website seems to be almost 3% higher/narrower.

Similar Messages

  • Creating domain for BI Publisher issue

    Hello,
    Im trying to create domain for BI Publisher 11.1.1.3.0.
    When configuring JDBC there are two component schemas: BIP Schema and OWSM MDS Schema. For database I have MS SQL Server configured with required RCU schemas.
    The strange part: when testing the configuration, one fails - the BIP Schema. In the result log I see a very strange ""SELECT 1 FROM DUAL"" test which is obviously for oracle and not MS SQL.
    For the 2nd schema, the one with successful test, there is a valid test query.
    Please help me understand what am I doing wrong, why is there an Oracle test query for a MS SQL database and finally why on earth only one test fails because for both i have the same database type.
    The version of fusion middleware is the one that came with BI installer 11g (11.1.1.3.0)
    If wonder why am I doing this manually it is because the BI installer hangs at step 11 Creating Domain for about 100 minutes and then exits with timeout. great programming!
    Please give me any hint, advise i can use to make BI Publisher run.
    thank you

    809239 wrote:
    Hi Experts,
    OBIEE 10.1.3.4.1.
    I am able to login bi publisher though Administrator user. But am not able to login remaing users.
    I am getting below error.
    Oracle BI Publisher Enterprise
    Reporting Login: Login failed: Please contact administrator for your username/password.
    Error Details
    Error Codes:
    Please help above issue it is very urgent.
    ThaksHi,
    Refer to this post to make sure you have all the settings implemented correctly: ( http://onlineappsdba.com/index.php/2009/01/15/oracle-bi-publisher-admin-console-xmlpserver-login-issue-administratoradministrator/ ).
    Also, check the log files to see if you can get more detailed error messages.
    -Amith.

  • I designer I want to create forms for web client, does each client have to purchase form central to access the data?

    I designer I want to create forms for web client, does each client have to purchase form central to access the data?

    Hi,
    In this scenario, you can share the document with the clients to and provide co-author privileges.
    Co-authors can edit the form design, options, responses, and summary report (everything that you can do).
    Note:- They do not require a paid subscription to view the responses, free subscription users can become co-authors.
    Please refer to the following thread to know how to share a form with others:-How do I share a form I created with others?
    Regards,
    Nakul

  • Why does "prepare for web publishing" turn text into an image?

    I have to prepare some supplied print PDFs for use on the web. I used to use "Reduce file size."
    With the new Acrobat, I use "prepare for web publishing". But when I use "prepare for web publishing", all the vector text in my document gets turned into a low-res image.
    Why would this be the case, and please tell me I can turn it off?
    Thank you!

    I'm just guessing here but could it be that the text is not a typical web-safe font? If not, I could see why it does that to preserve the appearance of the document for those that don't have the proper fonts installed.

  • Create iView for Web Dynpro Application

    Hi guys,
    I've created a Web Dynpro Application via NWDI and deployed to the j2ee server. Now, I'm trying to create an iView to link to that application. The steps I've done are:
    1. Create iView for Web Dynpro Application
    2. Select "Create iView from each application View"
    3. Select my application.
    That's when the error occurs at step 3. I select my application and click next, but an error msg keeps appearing telling me to "To continue, select at least one application" despite having already done so. Can anyone enlighten me on this? Thanks!
    ZHenmin

    Hi,
      First make sure the applications runs fine standalone. Also the versions for WAS and EP are maintained correctly. Actually, this error seems to be occur for many users. Check this thread too.
    Open new Web Dynpro iView in EP7
    If nothing works, restart the server and try creating the iView again.
    Regards,
    Harini S

  • InDesgin CS6:  What is best practice for creating a jpg for web use?

    My graphic design experience is heavy toward print, but I’ve been charged to solve this web-graphics problem for my team. I’ve done searches online and can’t find resources specific to this issue. Thank you in advance for any assistance you can provide.
    Here’s the issue:
    My team uses both InDesign and Photoshop CS6, to make landing pages and other stuff for our website. After saving to jpg files, the InDesign files always have jaggy text compared to Photoshop’s jpg. What are we doing wrong?  Can’t InDesign be used for web?  I’ve also tried saving it out as PNG with no better results.
    Note: The background in the InDesign files are created in Photoshop (these look fine in both programs)—but the text created in InDesign looks jaggy while Photoshop’s text looks clean.
    Here’s how we save it in Photoshop
    File > Save for Web with these settings: JPG, High, Optimized, Quality 70, Blur 0, Matte None, Quality Bicubic.
    Here’s how I solved the problem (which seems too labor intensive to actually be correct) Is there a better way?
    I convert text to outlines.
    I change the “intent” to web intent
    Manually reset the page size.   Whenever I change the intent in anyway, InDesign automatically changes the page size to 8.5”x11” or 800x600 pix regardless of the original page-size. I expect it to change proportionately from inches to pixels, or vise-versa, but it just won’t do it. Is there a preference for this somewhere?
    Export as JPG with these setting:  Quality Maximum, Format method progressive, Resolution 72 ppi, Color Space RGB, Options: Embed Color Profile: sRGB IEC6196-2.1, anti-alias.
    Our web people tell us that if we use a higher resolution the image comes in proportionately too large, and they can’t use it at that size.
    This seems like a lot of work. There must be a better way?

    Ok. Thank you.     Hmm....I don't have PDF/X-4.  I have Adobe Preset PDF/X1a and PDF/X3.
    I assume PDF/X-4 is a from a newer version of InDesign.  Will PDF/X-3  work as well?
    So there is not a way to achieve a crisp jpg or png directly from InDesign without all the steps I'm using now?
    BTW, do you happen know why changing the "intent" changes the page size? or where I can change a preference on this.  unless I've overlooked it, I don't see anything relating to this under edit > preferences. 
    Thanks again for your reply, I value your input!

  • Creating Thumbnails for web page links to larger images.

    I want to create thumbnail images for linking to web page linking to enlargements. I'm using PhotoShop Elements 2.0 on a Dell 2400, XP Home Edition with 512mb RAM and 35gb storage available.
    The language I read in help sections doesn't addressed the issue I want help with. I believe it addresses saving thumbnails for Windows and Mac using .tiff or .psd format, not the .jpg or .gif I need. It seemed like there should be a way to change the thumbnail format. Any suggestions would be appreciated.

    Hi Ted,
    You can use the ' Web Photo gallery ' as Jodi suggested for a large
    number of images or,
    Open your image, click the bar at the top of the displayed image &
    reset the size to what you want, then 'File', 'Save for Web' & save as
    .jpg or .gif. .jpg gives more options for reducing file size so that
    is what I use. Close the image without saving
    HTH,
    Alex,

  • Reports9i Builder does not create Graph for Web Source

    Hi
    I installed the new 9iDS and I'm trying to create a jsp page with a graph. If I create a graph in the paper layout it will run in paper layout only. After checking the web source code there is no <rw:graph ... > tag. If I try to insert the graph in the web source view I get REP-0069: Internal error REP-0: oracle/reports/RWExxception: 1.0. Is there a way to create graph for the web layout?.

    Hi Nestor,
    This should work fine. I assume you created the report using the wizard. Did you by any chance choose to create a paper layout only?
    Try the wizard option 'Create Web Layout only' or 'Create both Web and Paper Layout'.
    Regards, Christian.

  • Optimum Settings for Creating .MOV for Web

    Hello,
    I shot my video footage using a Canon XL-1 with a MiniDV tape. I then loaded this footage into Final Cut Pro (Version 4), running on MAC (Version 9.0), and then completed my editing. Besides creating a final 42-minute version to be shown on television, I would like to break up this 42-minute version into three separate pieces (a 21-minute, an 11-minute, and a 10-minute slice) for Web/Internet delivery.
    To do this, I will create three separate .MOV files; however, I would like to know the 'OPTIMUM' configuration Final Cut Pro settings/considerations before creating these .MOVs for optimum audio/video quality when shown on a website. By the way, after I produce these .MOV files, I plan to encode them using FlixPro's ON2 V6 Codec to finally produce Flash 8 .FLV files for uploading to my web server.
    Any and all advice regarding optimum Final Cut pro settings/considerations before creating these .MOVs would be aprreciated immensely!

    Thank you for your reply. I take it then that current default settings are OK.

  • ACS 5.3 Dashboard - Any way to create Dashboard for all users?

    I'm at the point of setting up admin access for engineers needing to have insight into the operations and status of our ACS 5.3 systems.
    I'm curious if there's any way to create a Dashboard that can be applied to all admin user accounts? (perhaps a custom role?)
    I've been able to customize the dashboard for my own account to show what is most relevant, but am unable to figure out how to apply this layout and setup to all other users.
    Basically, I have a number of folks that need to see this data, but that I can't exactly count on to setup their own dashboards to show the important details.  If there were some way to build a tab/dashboard/portlet, etc (whatver it may be) and have it apply to all users, that would save me TONS of work so that I don't have to login to each person's account and set things up for them.
    For example, I want to have all users see a tab/dashboard that shows the applet "Live Authentications", but with the protocol already configured to display TACACS vs the default which is RADIUS.
    Any thoughts?
    -Chris

    Chris,
    I see you are looking for read-only access to Dashboard. Currently there is no way to force all Admins to use same Dashboard and all admins will have full control of the Dashboard.
    Regards,
    ~JG
    Do rate helpful posts!

  • Is there any chance of creating conditions for parameters in discoverer...

    Hello all,
    can u help me..
    i will tell the situation
    i have some countries with some codes like 40 to 80. and i have a group name for these countires like 'EMT'.
    like that i have total three groups of different names ....
    I like to create a parameter in discoveree for theses three group cpuntries.
    if i select "EMT" as a parameter i have to get all countries of code 40 to 80.
    is there any possible way to create condition for a parameter like if select this parameter those values only should display..
    iam selecting country name,code in my query..
    Plz help me..
    Thanks in advance..

    Perhaps I am misisng something, but would you not have a table that links the code values to the group name the code value is assigned to? Good database design would say that such a table should exist. I would just bring in that table into the business area and create the join that allows the link to that table. Then you have the group name available to pick as an item to create a parameter on. If there is no such table, then yes, you are stuck with having to do something as mentioned in the other reply.
    John Dickey

  • Creating video for web

    Hi,
    I'm currently putting together some videos in FCP for our new website. I've used FCP a lot for creating video for DVD's and exporting to .mov but converting to flash is relatively new to me.
    I am using the On2 Flix FLV exporter to export direct from FCP to a 704 x 396 flv file.
    Can someone clarify how I should set up my sequence in FCP to get the best quality results? All the source material is DV PAL for video (720 x 576 anamorphic) and PNG-24 for still images (in this case a background which I will input text over in FCP). Should I be setting all my sequences to 704 x 396, and what pixel aspect ratio should I use seeing as it is for flash/web use?
    Also, in the Sequence Settings dialog box what should I set as the Compressor settings (dv pal/h.264 etc) as flv does not appear as an option?
    Thanks
    Jack

    Thanks guys. So if I am to carry on working in the standard DV-Pal sequence I'm wondering what to do when importing graphics. I have been given a psd which contains a title screen that will be placed before each video. The psd has been given to me at 704 x 396 - the size of the final delivered FLV rather than the DV Pal sequence. When I bring this image into FCP and render it makes the image look pixelated/blocky (I'm exporting from Photoshop as a PNG-24). What is the proper way to export graphics for use in Final Cut? Should I re-size the image to match the sequence or bring it in at 704x396 and have Final Cut resize it?
    Thanks
    Jack

  • Create Transaction for web-dynpro ABAP

    hi
       Can you help me in creating a transaction for web-dynpro ABAP.
    thank you.

    If you want a SAPGUI transaction code that will launch your Web Dynpro ABAP application then I suggest creating a parameter transaction code that wraps around the SAP standard transaction code WDYID.  You can use the parameter STARTMODE to decide if you launch your browser within the SAPGUI window or if it opens a new browser window. You will get SAPGUI based Single Sign On with this transaction code as well.  Here is an example of a TCode I setup:
    http://www.flickr.com/photos/tjung/2758987559/
    And here is what it looks like when running in place within the SAPGUI:
    http://www.flickr.com/photos/tjung/2758987583/

  • Creating videos for web with QuickTime Pro

    HI,
    I need to create videos for my web site that are compatible with the Ipod. However, I also need to create a file that can be played on a PC, without requiring the use to install a plug in (e.g. Flash or similar).
    Does QuickTime Pro have anything that can help me produce a video that is compatible with both the Ipod and the standard PC web browser?
    Thanks very much,
    Jamie Dolan

    Every video format will require a browser plug-in be used.

  • Pls Provide any example of creating DataSourceColumn for the block of form

    Hi All...
    the syntax of creating DataSourceColumn is correct????
    DataSourceColumn colmap2 = new DataSourceColumn(blk1,colmap1.getDSCName());
    please provide any sample program of creating DataSourceColumn for the block in the form.

    Hi Anjali,
    I agree with Sreenath.
    Few Suggestions:
    If these two fields are the part of Transaction Data then you need to add them in Transfer Structure and Infoprovider.
    If you want to use these objects as only Navigational Attributes then you need not add these fields to the Infoprovider, just make them as navigational attributes in the master data characteristics.
    Hope that helps.
    Regards
    Deepak

Maybe you are looking for