Any external hd recognised after waking from sleep?

is there any external hd fast enough to be recognised when air is waking up from sleep? (disc unmounted unproperly - error)

There are a couple programs that will automatically dismount drives when you sleep your computer. I use Jettison not due to your problem but because I have a firewire drive that won't sleep when the computer does but will sleep if dismounted. When the computer wakes the drive remounts properly. You might give it a try.

Similar Messages

External Hard Drive Fail After Waking from Sleep

Hi,
I've been having this issue for over a year (since upgrading to Lion, and now still persists after upgrading to Mountain Lion), and I haven't been able to find the exact answer I need after searching through the posts here, and on the internet.
I have a 2011 MBP, and after upgrading to Lion last year, I've noticed that my WD external hard drive for the Mac has issues to be recognized after the laptop wakes from sleep. The drive icons are still there on the desktop, and all the files are listed. However, I cannot open any of the files, and Time Machine backup automatically fails.I am able to eject the drives by dragging the icons into the trash can. However, nothing happens if I simply unplug the fire wire 800 cable and re-plug it into the computer after ejecting the drives. I need to reset the external drive by unplugging both the fire wire cable and the power supply, and replug everything.
Aside from being a hampering process after waking from sleep, this is also very stressful on the drive itself, so I would like to fix this. Does anyone know the issue behind this or have a solution? Thanks in advance!

Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

Display will not sleep any more after waking from sleep

My Macbook has recently started misbehaving after waking from sleep. Started putting the entire MB to sleep each night by closing the lid. When I wake it in the morning everything seems normal, no error messages. However from that point forward the display will not dim or sleep. I've tried re-applying my settings in System Preferences -> Energy Saver. Pretty much the only fix has been to reboot, which is annoying and Windows-like.
In the interest of full disclosure, I have "fast sleep" enabled (aka hibernation mode disabled) but I've had that since I bought my MB with 10.5.1 on it. So I don't think it's related. In fact I changed to the default Energy Saver profile to see if that fixed the problem (it didn't), which re-enabled hibernation mode and I then had to re-disable hibernation.
I want to say this started happening after the 10.5.4 update, but that may have been a coincidence as to when I started sleeping it each night... I don't exactly remember.
I downloaded Cocktail to run all the cron jobs, etc, that don't get run when sleeping at night, and that didn't help either.
Any suggestions? Anyone else ever see this? Seeing it now?
Thanks!

This is still an issue for me.
I sleep my Macbook every night by closing the lid. After doing this a few times, the display either stops sleeping, or stops locking. I have the lock menu in the Apple menu bar, and even selecting "Lock screen" will not work.
Sometimes a reboot fixes it, sometimes I have to reset the SMC.
Any info out there?

My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep. Is there any way to make this instant?

Hi
My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep. Does anyone else have this problem and is there a fix?
Alan

coxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.

Macbook Pro restart after waking from sleep

Hi all,
Since I've installed Mountain Lion (10.8.2) on my 13" Late 2011 Macbook Pro I've been experiencing a quite annoying problem. The computer, which is connected to an external monitor through Thunderbolt to HDMI will restart (Sometimes to a gray screen with a progress bar) after waking from sleep. I've done some research and it would appear as though the problem is related to the display driver.
I'm wondering if anyone has any experience with this peculiar problem or if there's a quick solution.
Thanks!

Maybe this will help. If you monitor the "More Like This" box, other solved threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/19675376#19675376

Sound problem after waking from sleep

When I wake my computer from sleep the external speakers to do not produce sound. This is not related to the 'red light' issue, no red light is shining and in the sound control panel 'internal speakers' is showing.
Interesting is that when I play with the alert sounds in the control panel I can hear them, but when I adjust the volume or try to get sound out of software (iTunes, Quicktime, etc.) I can not hear anything. Also, when the computer is waking from sleep if I quickly toggle the volume control I get one or two 'clicks' before it goes silent. I have repaired the permissions according to other posts but that did not help.
However, if I plug in earphones and take them out again the volume works. . .
any suggestions?

Todd Sackett wrote:
Hi everyone, after waking from sleep, the first sound that is played is accompanied by a hissing sound for the first couple seconds. It does not happen after that at all that I have noticed. It comes out of either the speakers or headphones.
Can anyone try this: (Esp. if you have a new MB Penryn update (most recent))
1) Close lid, put to sleep.
2) Wait 5-10 mins
3) Open lid, log in to iChat (with login sound on) or make some other sound play. Listen for a hissing or static sound within the first couple seconds of whatever you just played.
Thanks for any help!
I don't observe this on my Napa-Revised Macbook

Keyboard volume keys don't work after waking from sleep

This problem has existed for many months on my 2009 Mac Pro. I'm running 10.6.3. The problem is reproducible 100% of the time. I use external speakers. Sound output is set to "Line Out."
1. Boot machine. External speakers work fine. Volume keys on keyboard (F11, F12) work correctly.
2. Put machine to sleep.
3. After waking from sleep, F11 and F12 no longer control the volume of the external speakers. The "pop" noise when hitting F11 and F12 is emitted from the internal speaker. The mute key (F10) does work for the external speakers, however.
4. The keyboard volume controls become responsive again by switching the sound output from Line Out to another output option and then back to Line Out.
This bug is a huge hassle. Does anyone have a solution?

I have several mid-2009 8-core Mac Pro's, all running Snow Leopard, and all have been having this problem as well.
I will not guarantee this is going to work for anyone else....but we have found a (slightly inelegant) workaround for it that has been working for several weeks now without fail.
Prior to putting your MacPro to sleep, run the volume all the way up and leave it there. Afterwards, put it to sleep as usual. We use the keyboard to do this, but I would imagine any method should have the same affect. However, I've not experimented.
Anyway...this has worked 100% of the time for us. The only downside of it is that you have to remember to run it up before....and then back down after waking (else that first alert sound or music file you play will really wake YOU up!)
If this works for anyone else, let me know.
Apple should never have let this one out the door with this bug. Especially, as Apple Support is....wanting, at best.
...sT

Network connection after waking from sleep

Hi... More or less any time I allow my MacBook Pro to go to sleep, when I wake it up I am nearly always disconnected from my Airport connection (I connect to a NetGear wireless router via my internal Airport card). I go up to the menu bar and click on the now grey airport icon and I do still see my network in the list of available networks. I click on it, after several seconds a message comes up that says "there was an error joining the Airport network "network name""... But I then simply click on OK (rather than Try Again, I've learned that by trial and error) and the network reconnects just fine... Then when I let the machine sleep again at some later time, I do that all again... Any suggestions of what might be going on??? I do have "Use Interference Robustness" turned on (not that I know why exactly) but I've also had it off before and that seems not to matter... Any suggestions??? thanks... bob..
FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro Mac OS X (10.4.8)

I have "join preferred networks" selected, and mine os the only one on the list, and it still does not connect after waking from sleep. It is WEP security, not WPA2. I checked out the following article, but it was of no help:
http://docs.info.apple.com/article.html?artnum=304482

Restarting after waking from sleep

I have a mid 2010 macbook pro running Mountain Lion OS X 10.8.3 of which keeps restarting after being left in sleep mode for an hour or two. When waking from sleep mode, the mac functions for about 5 seconds, before restarting by itself. I have tried deleting certain plist files (as suggested by other posts) but that doesn't seem to have helped. I have also recently installed a new hard drive, but i continue to have the same problem. Below is the panic report from the recent restart after waking from sleep mode:
Thu May 23 22:40:58 2013
panic(cpu 0 caller 0xffffff7f9a7957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811b9a5000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff810a102f80 : 0xffffff801a01d626
0xffffff810a102ff0 : 0xffffff7f9a7957f2
0xffffff810a1030b0 : 0xffffff7f9a8923b9
0xffffff810a103110 : 0xffffff7f9a89242e
0xffffff810a103180 : 0xffffff7f9abb8c82
0xffffff810a1032b0 : 0xffffff7f9a8b8fe8
0xffffff810a1032f0 : 0xffffff7f9a79d567
0xffffff810a1033a0 : 0xffffff7f9a79b05a
0xffffff810a1035a0 : 0xffffff7f9a79c983
0xffffff810a103670 : 0xffffff7f9b8b5790
0xffffff810a103730 : 0xffffff7f9b8e0f98
0xffffff810a1037b0 : 0xffffff7f9b8c8308
0xffffff810a103810 : 0xffffff7f9b8c8be9
0xffffff810a103860 : 0xffffff7f9b8c909b
0xffffff810a1038d0 : 0xffffff7f9b8c98d1
0xffffff810a103910 : 0xffffff7f9b89534f
0xffffff810a103a90 : 0xffffff7f9b8c5e39
0xffffff810a103b50 : 0xffffff7f9b893de8
0xffffff810a103ba0 : 0xffffff801a4650c9
0xffffff810a103bc0 : 0xffffff801a466670
0xffffff810a103c20 : 0xffffff801a46408f
0xffffff810a103d70 : 0xffffff801a0984a1
0xffffff810a103e80 : 0xffffff801a020aed
0xffffff810a103eb0 : 0xffffff801a010448
0xffffff810a103f00 : 0xffffff801a01961b
0xffffff810a103f70 : 0xffffff801a0a5dd6
0xffffff810a103fb0 : 0xffffff801a0cdd43
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a738 000->0xffffff7f9aa45fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
         com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 aa53000->0xffffff7f9ad74fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
         com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f9b882000 ->0xffffff7f9b94efff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000019e00000
Kernel text base: 0xffffff801a000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3064164203775
last loaded kext at 299154607765: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f9c477000, size 229376)
last unloaded kext at 354384336276: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f9c469000, size 57344)
loaded kexts:
com.Logitech.Unifying.HID Driver          1.3.0
com.Logitech.Control Center.HID Driver          3.7.0
com.apple.filesystems.smbfs          1.8
com.apple.filesystems.exfat          1.3
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.12.87
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.GeForce          8.1.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHDGraphics          8.1.0
com.apple.driver.AppleIntelHDGraphicsFB          8.1.0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleUSBHub          5.5.5
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.nvidia.nv50hal          8.1.0
com.apple.NVDAResman          8.1.0
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.driver.IOBluetoothHIDDriver          4.1.3f3
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Any suggestions would be greatful,
Thanks,
Marie

Replace the pair of DIMMs first.
Monitor the temps inside.
Install and use SmcFanControl 2.2
Run Apple Hardware Test
You may want to try a clean system install to test with once you have the RAM replaced. Faulty RAM can cause all kinds of issues. And dirty files. Some deeper check for corrupt files than Disk Utility is probably in order.
There is a significant "Inrush-current" on boot and wake from sleep with the 2008s. They need good power, a 1500VA/900W UPS, and sensitive to other equipment on the same circuit.
Inrush current

Macbook pro 2010 crashes after waking from sleep

Hi,
I upgraded to mountain lion a month or so ago and ever since my MBP often crashes after waking from sleep. I've included the error report below. Any help would be appreciated. After it restarts, it works fine. Problem consistently happens after waking from sleep.
Thank-you
Interval Since Last Panic Report: 55755 sec
Panics Since Last Report:          1
Anonymous UUID:                    D0E51DBB-BAAC-864E-AF93-8DAF5E934CE9
Sun Dec 2 08:24:22 2012
panic(cpu 0 caller 0xffffff7f8aabdb25): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811e05d000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff80fa7bb420 : 0xffffff800a21d626
0xffffff80fa7bb490 : 0xffffff7f8aabdb25
0xffffff80fa7bb520 : 0xffffff7f8abb74b3
0xffffff80fa7bb580 : 0xffffff7f8abb7527
0xffffff80fa7bb5f0 : 0xffffff7f8aecc853
0xffffff80fa7bb730 : 0xffffff7f8abdd659
0xffffff80fa7bb760 : 0xffffff7f8aac78da
0xffffff80fa7bb810 : 0xffffff7f8aac2fac
0xffffff80fa7bba00 : 0xffffff7f8aac43a2
0xffffff80fa7bbad0 : 0xffffff7f8acb815a
0xffffff80fa7bbb00 : 0xffffff7f8ac9be1a
0xffffff80fa7bbb30 : 0xffffff7f8ac9b241
0xffffff80fa7bbba0 : 0xffffff7f8ac9b362
0xffffff80fa7bbc20 : 0xffffff7f8aca687d
0xffffff80fa7bbc50 : 0xffffff7f8acae61c
0xffffff80fa7bbdd0 : 0xffffff7f8aa5a3c7
0xffffff80fa7bbe40 : 0xffffff7f8aa4457b
0xffffff80fa7bbeb0 : 0xffffff7f8aa46c04
0xffffff80fa7bbf00 : 0xffffff7f8aa0839f
0xffffff80fa7bbf20 : 0xffffff800a649e4a
0xffffff80fa7bbf60 : 0xffffff800a23dcde
0xffffff80fa7bbfb0 : 0xffffff800a2b26b7
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000->0xffffff7f8aa36fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
         com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8aa42000->0xffffff7f8aa53fff
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
         com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8aa56 000->0xffffff7f8ad58fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8aa42000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000
         com.apple.nvidia.nv50hal(8.0)[9F3D09B5-3158-3D9E-BDA3-E71576AAD3B7]@0xffffff7f8 ad66000->0xffffff7f8b088fff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8aa 56000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000000a000000
Kernel text base: 0xffffff800a200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 50092647901403
last loaded kext at 48562451601465: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f8c5c0000, size 16384)
last unloaded kext at 48645674911297: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f8c5c0000, size 12288)
loaded kexts:
com.razer.orochi.driver    2.0
com.rim.driver.BlackBerryUSBDriverInt    0.0.74
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AGPM    100.12.69
com.apple.driver.AppleHDA    2.3.1f2
com.apple.GeForce    8.0.0
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.9f33
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.ApplePolicyControl    3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleIntelHDGraphics    8.0.0
com.apple.driver.AppleIntelHDGraphicsFB    8.0.0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.0.9f33
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleSMCLMU    2.0.2d0
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleMikeyDriver    2.3.1f2
com.apple.driver.AppleMuxControl    3.2.11
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.SMCMotionSensor    3.0.2d6
com.apple.driver.AppleUSBTCButtons    235.4
com.apple.driver.AppleUSBTCKeyboard    235.4
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AirPort.Brcm4331    602.15.22
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard    165.5
com.apple.driver.IOBluetoothHIDDriver    4.0.9f33
com.apple.driver.AppleHIDKeyboard    165.5
com.apple.driver.DspFuncLib    2.3.1f2
com.apple.iokit.IOAudioFamily    1.8.9fc10
com.apple.kext.OSvKernDSPLib    1.6
com.apple.nvidia.nv50hal    8.0.0
com.apple.NVDAResman    8.0.0
com.apple.iokit.IOSurface    86.0.3
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.iokit.IOBluetoothFamily    4.0.9f33
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.0.9f33
com.apple.kext.triggers    1.0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleGraphicsControl    3.2.11
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.iokit.IONDRVSupport    2.3.5
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.driver.AppleHDAController    2.3.1f2
com.apple.iokit.IOGraphicsFamily    2.3.5
com.apple.iokit.IOHDAFamily    2.3.1f2
com.apple.driver.IOPlatformPluginFamily    5.2.0d16
com.apple.driver.AppleSMC    3.1.4d2
com.apple.driver.AppleUSBMultitouch    235.7
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.driver.AppleKeyStore    28.21
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOStorageFamily    1.8
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Razer Orochi, 0x1532, 0x0013, 0xfa140000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

Back up all data, then uninstall the Razer and Blackberry software according to the developers' instructions. Reboot and test. Most likely there will be no change. In that case, see below:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video

Logic Pro X inaccessible after waking from sleep when using an MCU Control Surface

I'm having a problem I cannot seem to get around without force quitting Logic every time. If I have a Control Surface setup as a Mackie Control (v1.0); and if the computer goes to sleep, and then i turn off the controller while the computer is asleep (for any reason), and then wake the computer without turning on the controller first, Logic becomes completely unusable and must be force quit.
My controller in this example is Solid State Logic's Nucleus controller, however it happens with other Mackie Control compatible controllers (i have another one i tested against), BUT not a real Mackie Controller sold by Mackie (i tested with that as well); more details below.
For the SSL controller, Logic automatically sets it up like this:
Now if the computer goes to sleep, and i wake it up, i get the following dialog, which is fine:
After clicking on "Continue" button or hitting the enter key, Logic is rendered useless, as if there is a modal dialog still open somewhere. Clicking anywhere on the gui results in white flashes and nothing else. doing cmd+Q to quit actually makes it try to quit (a save dialog appears), but it never does successfully quit, making me resort to force-quitting. For an example, here's a pic of the file menu at this point:
I also have a regular Mackie Control Unit (MCU Pro) and the strange thing is with that unit, everything works fine after sleep, turning off controller, and re-awakening. However, there is a difference in what kind of dialog is displayed after the sleep, which probably has something to do with this issue.
Here is the setup screen of the MCU Pro:
And here is the dialog for the missing ports after waking from sleep:
This dialog is completely different than the other control surface's missing ports dialog. When clicking on "Keep unassigned" here, Logic resumes working fine.
The project is as minimal as possible; nothing is loaded, all that's there is an empty instrument track and a Control Surface configured.
I'm using a Mac Mini (late 2012)
Processor 2,6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000
Software OS X 10.9.4 (13E28)
with Logic Pro X 10.0.7
Any help would be greatly appreciated!!

Did you ever figure out a solution to this problem?
I just pulled out my original Emagic Logic Control (MIDI) and I have having the same problem.

After upgrading to Tiger, freeze after waking from sleep on PM G4

My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
When I installed Tiger, I used the 'archive' option.
My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
I also see an error in the system.log which may reveal what is going on:
Nov 20 18:54:40 localhost kernel[0]: standard
timeslicing quantum is 10000 us
Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
2005 11: 46:54)[44]: starting
Nov 20 18:54:40 localhost kernel[0]:
vmpagebootstrap: 284852 free pages
Nov 20 18:54:40 localhost kernel[0]:
migtable_maxdispl = 70
Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
modules
Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
1982, 1986, 1989, 1991, 1993
Nov 20 18:54:40 localhost kernel[0]: The Regents of
the University of California. All rights reserved.
Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
headers and 2949 cluster IO buffer headers
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
9 already taken
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
AppleUSBOHCI[0x2057000]::start OHCI controller will be
unloaded across sleep
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
TI ID 8019 built-in now active, GUID 000a27ff
feb38fe6; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
VendorID 1033 ID cd PCI now active, GUID 0000303c
0008c32e; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: Security auditing
service present
Nov 20 18:54:40 localhost kernel[0]: BSM auditing
present
Nov 20 18:54:40 localhost kernel[0]: disabled
Nov 20 18:54:40 localhost kernel[0]: rooting via
boot-uuid from /chosen:
474ACE52-2523-3EE7-9C54-DDC3734C7922
Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
ID="0"><key>IOProviderClass</key><string
ID="1">IOResources</string><key>IOResourceMatch</key><string
ID="2">boot-uuid-media</string></dict>
Nov 20 18:54:40 localhost kernel[0]: Got boot device =
IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
Nov 20 18:54:40 localhost kernel[0]: BSD root:
disk0s10, major 14, minor 10
Nov 20 18:54:40 localhost kernel[0]: jnl:
replay_journal: from: 2668032 to: 12288 (joffset
0xe04000)
Nov 20 18:54:40 localhost kernel[0]: Jettisoning
kernel linker.
Nov 20 18:54:40 localhost kernel[0]: Resetting
IOCatalogue.
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 2
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
loaded and registered.
Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
filtering initialized, default to accept, logging
disabled
Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
Ethernet address 00:0a:27:b3:8f:e6
Nov 20 18:54:41 localhost launchd: Server 292f in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
abnormally: Hangup
Nov 20 18:54:41 localhost lookupd[56]: lookupd
(version 365) starting - Sun Nov 20 18:54:41 2005
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk0s10 hfs
474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
Nov 20 18:54:41 localhost kernel[0]: jnl:
replay_journal: from: 1374208 to: 1564160 (joffset
0x624000)
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk1s10 hfs
947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
/Volumes/Backup
Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
[98000000:08000000]
Nov 20 18:54:43 localhost
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
Login Window Application Started
Nov 20 18:54:43 localhost loginwindow[72]: Login
Window Started Security Agent
Nov 20 18:54:44 localhost mDNSResponder: Adding browse
domain local.
Nov 20 18:54:45 localhost kernel[0]:
UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
Full Duplex
Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
setting hostname to "Jason-Radtkes-Computer.local"
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
executing
/System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
posting notification
com.apple.system.config.network_change
Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
lookupd (version 365) starting - Sun Nov 20 18:54:47
2005
Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
target=enable-network: disabled
I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
Thanks in advance for your help.

Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
Ron

After waking from sleep, my iMac (Lion) is unresponsive. The mouse moves, but when I click things it won't open them.

After waking from sleep, my iMac (Lion) is unresponsive. The mouse moves, but when I click things it won't open them.
This has happened EVERY time the iMac goes to sleep for the last few days.. the only way I have found to resolve the issue is to manually restart the computer each time via the button on the back of the iMac.
Any and all help is appreciated!
Thanks

FWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.

BSOD after waking from sleep On XP and Vista

Hello my name is Santiago. I have started getting BSODs after using sleep lately. I get BSODs after waking from sleep on windows Vista. I upgraded to that recently, and that is when the problem started. It was working fine for a few days then it just bluescreened, I have switched back to XP and see if it was with only vista. but it was not I do not know what to do any more. may any one please help me?
This is what the blue screen says
http://pwimage.org/images/l9ix40o7yfyfhjwd63i6.jpg
the model is a T60 think pad.
Message Edited by spena09916 on 11-21-2008 01:35 PM

Hello Santiago,
the link doesn't work anymore...
So i'm just guessing:
• did you check your memory? Might be a failure in a module.
• you should update youre drivers. Use the system update tool.
• did you try a recovery or new installation of your system? if the BSOD still occurs, there really might be a hardware failure... do you still have warranty?
Cya
Omar

Sound volume control unresponsive after waking from sleep

Lately, a strange problem has developed on my MacBook 13-inch Aluminum (Late 2008), running Mac OS X 10.6.4:
After waking the MacBook from sleep, the sound volume control keys on the keyboard does not affect the volume control of:
* Neither the sound volume output by the built-in speakers,
* nor the sound volume indicator/slider in the menubar,
* nor the sound volume indicator/slider in the Sound preference pane in System Preferences,
Only the sound volume slider/indicator in the Sound preference pane in System Preferences has an effect on the actual volume ouput by the built-in speakers.
First I thought the problem was affected by disconnecting a set of analog headphones while the MacBook was sleeping -- it seemed that after sleep the volume control keys on the keyboard and menubar item still was set to affect the headphone port and not the built-in speakers.
However, the problem just occured after sleeping without anything connected to the MacBook. The built-in speakers were muted, when the MacBook lid was closed, and the computer went to sleep - after waking from sleep the built-in speakers were unmuted - and control was only possible through System Preferences.
Any ideas?

Not sure if you stumbled on the other threads like this one:
http://discussions.apple.com/thread.jspa?messageID=11801555&#11801555
I've been having the same problem on my Mac Pro for a while, finally decided to see if there were some other people having the problem. I'll see if the others have a solution yet.
One workaround I've been doing is to go to Preferences -> Sound and select a different output device. For me, I have to flick to Internal Speakers and then back to Line Out.
Brett

Any external hd recognised after waking from sleep?

Similar Messages

Maybe you are looking for