Any factors that Development Components cannot be imported?
Dear all experts,
I am new to Webdynpro development. I have tried to open a webdynpro program developed by other developer before.
1. Copy the source code under my documents and settings, e.g. d:\Documents and Settings\xxx\.dtc\LocalDevelopment\DCs\com.xxx.xxx
2. Select File > Import and then select Development Components and logon my account to server. Supposing the component would be appeared under Local as usual. However, this time, I cannot see the component imported.
May I know do you have any idea for about? Thank you very much!
Best regards,
Anne
Hi,
You can export the DC present in the developer system and then import that .sca file into your System.
Then refresh the Developement Component.
Now right click the DCs available and select Create Project if it is available.
In the next step right click on the DC and select sync Used DCs.
Then Build and Deploy the DCs.
If you have any problem (errors) while Syncing or Building check the error log for Missing DCs.
For any guidance on importing and exporting the Development Component follow this link.
/people/srinivasan.subbiah/blog/2008/03/21/team-oriented-development-without-remote-nwdi-in-ce-71
Note: The Developement Configuration package should be same in both the systems.
Regards,
Gayathri.
Similar Messages
-
Import and Export of Webdyn pro development components
Hi
I am having a problem in importing a development component.
When a component has to be transfered from one NWDS to another NWDS i generally export the development component as a zip file. How do i import the Zip file into other NWDS. I tried the import option but the import is not proper.
Any other way of exporting and importing development components ?
Regards
NagaKishoreHi Karin,
I faced a similar problem some time back. I unzipped the project and then imported it. But what i found is that in the webdynpro explorer i could not find the nodes for Public parts and so which are specific to DC projects.
Regards
Sidharth -
Wrongly posted in iPhoto forum, should probably be posted here instead.
I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a passcode.".
This computer is not one that I want to import photos to (or sync with the iPhone), so this message is just very annoying, and it pops up all the time. I cannot find a way to disable this message. It is constantly appearing. No application is launching, I have turned off the iPhoto launch in the Image Capture app as well as in iPhoto. Thanks in advance if anyone has any information about this.Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them. -
hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
Import the existig Development Components using NWDS
Hello Portal Developers,
I have a query and need your help to resolve it.
I would like to import the existing Developed Components (DCs) from portal.
How can it be done? Can i use the NWDS to import the existing DCs.
Your earlier help will be very much Appriciated.
Thanks in Advance
Regards
SrinivasHi srinivas reddy ,
You must have the NWDI for importing the existing DC's into your NWDS. If u don't have NWDI configured, you can not get that back to NWDS. Instead you can open the DC which you deployed before and modify them and redeply.
reward points if useful
Thanks
Suresh -
Dear Team,
Can we secure “sent msg” that the receiver cannot edit while forwarding/replying?
Is possible to import .PST file(S) into thunderbird? If yes, any size limit?
Can we convert thunderbird data file in .PST?I don't think you can prevent email body text from being copied and edited.
You'd probably need to created a protected Word or PDF document, and send it as an attachment.
This is still some sort of guessing because it's still not clear to me what exactly your scenario is.
Whatever text you send in an email, regardless of whether in the body or as an attachment, the recipient will always be able to use that and distribute it further, e.g. by making a screenshot. And images can be 'photoshoped' as well.
If you want the recipient to be able to detect whether a message or an attachment has been altered on transit, you'd need to sign it. -
Blackberry Curve 9300 Imported. Operator states that the device cannot be found?
Hi,
I am in South Africa and have recently purchased a BlackBerry 9300. It appears that this phone is an import as it is not branded with any of the local branding, meaning the bootup logo and background.
I hiae tried to get the BIS activated on this phone. For some reason when I register the host routing table (shows no entries) I do not recieve any confirmation sms and no service books are pushed to the phone. When i called to query this with my operatorr (Vodacom) they told me that from my side they cannot pick up the phone at all. The only has record of another blackberry that I was using and even after giving them my imei and pin they said that from there side it seems that the device cannot be found when they tried to manually add it to the network. Other than that, they were not able to provide me with any real solution as to why this is or how it can be solved.
Would anyone be able to provide me with some information regarding why this phone cannot be BIS registered to my network or why I do not get registration confirmation when registering the host routing table along with no service books being pushed to the device?
Any input would be greatly appreciated, thank you!
Solved!
Go to Solution.Please do the factory reset to rule everything out.
Where did you get the device?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?
turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them
-
Hi, I reecntly purchased a Mac and the Pages App. But now I find that I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. It is visible in both the Pages Windows and under Recent Items but just will not open. Any suggestions please?
Hi Colourdoodles,
Maybe the document is corrupted. Can you open other Pages documents? Preview may open it. Right click (or control click) on the document in Finder and Open With > Preview.
If that works, Edit > Select All, Edit > Copy. Then paste into a blank Pages document. Formatting may be messed up, but you will have editable text. Then Save (with a different name), close and see if you can open the new document.
Regards,
Ian -
When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?
asifmanzoor wrote:
i have 10.7.2, this download is 10.7.5
Are you Downloading it from here > http://support.apple.com/kb/dl1582
asifmanzoor wrote:
yes, i am using wifi
1) Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
OR...
Do not use Wi-Fi and connect Directly to your Internet via ethernet cable. -
I think I finished installing Mountain Lion, and am at the "log in" page with the Mountain Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro, which is said to have the capabilities of running Mountain Lion.
BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP. -
Yes my itunes account was disable because i got charged for unathorized purchases and due to that fact i cannot download any apps or get my music from icloud because my account is disable can you help me please,?
Try contacting the iTunes Store: http://www.apple.com/support/itunes/contact/
-
Dear, Apple Technical Support
I have just purchased a 2nd generation iPod and I am a returning user to iTunes. unfortunately, I have not used iTunes since the year 2008. I have noticed a lot of things have changed and I am unable to properly organize my music. I have noticed that I cannot change the display of my songs and albums from icons into a list. I would like to form a list so that I may change the name of the composing artist so I can compile multiple songs into one album. Unfortunately, many of the DJ and Trance albums that I already have on my computer have various contributing artists and are then catigorized by the names of their contribiting artist. What I want to do is take all of these songs from one CD that have alreayd been divided and recombine them to form one singlar album on my itunes. I find it frustrating in having to search through 3000 songs just so I can upload my most favorite ones onto my iPod when I could just drag and drop the entire album into the iPod folder. I have also tried high lighting all of the songs that I want to combine into one album and then right click to get more information and change the name of the contributing artist so that they will automatically compile into one folder but it did not work. I also tried to drag and drop one song onto another, just the same as I would in Microsoft Media Player if I wanted to combine albums or add songs to an album, but that also did nothing except cause my computer to make a sound. I would like to know how I can optimize my itunes and make the most of what I have. Unfortunately, it seems like you company is not formiliar with the term "If it is not broken, then do not fix it". Putting asside that comment, is there anything that I can do to combine albums that I have not already tried and could you please give me any suggestions that will work so I will continue this product instead of giving up and just go back to using microsoft. Thank you very much.
- Mathus7This is a user to user support forum...
The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
In Windows, you can restore much of the look & feel of earlier versions with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
Edit > Preferences > General > Show list views for all media does what it says
With iTunes 11.0.3 and later you can enable artwork in the Songs view from View > Show View Options (CTRL+J) making it more like the old Album List view
View > Show View Options (CTRL+J) also contains options to change the sorting of grid based views
Within Music the Songs view should be the list you are familiar with.
As to getting things organized see Grouping tracks into albums.
tt2 -
i cannot find imported mailboxes. if i try to setup a new mailbox, it shows the existence of the mailboxes under location/on my mac. they do not show up in the mailbox list. where would they be located so that i can retrieve them?
Did you quite Mail and relaunch?
Your imported mail is stored in a new mailbox called “Import.” To reorganize imported messages, create new mailboxes and drag folders and messages from the Import mailbox to other mailboxes. When you’re done, you can delete the Import mailbox.
If you don’t see your mailboxes in Mail, choose View > Show Mailbox List; empty mailboxes aren’t imported. -
I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking repair. But still the attachments won't open including invoices I have received today. It is all attachments not just pdfs.
Angela Richens wrote:
It is all attachments not just pdfs.
Then most likely it is not caused by Adobe Reader.
Anyway, perhaps someone has some idea, if you give us some details: operating system, browser, email client, ...
Maybe you are looking for
-
Error when creatibg a web service in SAP r/3 ecc 5, WebAS 640
We are trying to expose a BAPI (BAPI_CUSTOMER_GETSALESAREAS) as a web service on SAP R/3 ECC 5. web AS 640. We created the virtual interface (Z_VI_CUSTOMER_BAPI)and the web service definition (Z_WSD_CUSTOMER_BAPI)from SE80. When we try to release
-
I did an IOS software update on my iphone and now I have lost all email, notes, texts and apps from the iphone. I tried to do a restore but to no avail. Help
-
How do I 'Find & Replace' with control characters - paragraph, carriage return, tab
In Pages 4.3 (Pages '09) I could insert special characters into the Find & Replace fields. It was great. Excellent way to clean up & recover text from a pdf or html. In Pages 5.2 that capability seems to be gone. When I turn on the special charact
-
Will charging my new iPad (which came with a 10v charger) with a 5v iPhone charger damage or harm my battery in anyway?
-
We have a group of editors that edit TV programs for a Public Access series. One of the editors is using iMovie 9. What we are trying is to put a black and a white rectangle in the bottom third of the screen to hold the host's and guest's name and ti