Any firmware update on WRT610N Ver 2?

I just bought WRT610N Ver2 few days ago
I checked Linksys website, Offical Firmware only 2.00.05B, was issued on last year.
But i found that Ver1 have firmware updates until Mar 2010
Also , there are some website say WRT610N ver 2 is equal to Cisco E3000,
and E3000 have new firmware for fix bugs on Aug 2010.
So i want to know,
Does Cisco Linksys giveup any New Firmware on WRT610N Ver2?

I don't know where you're seeing updates to v1. The only thing I see dated March 2010 is the Upgrade instructions. Last Known firmware for V1 is still Ver.1.00.03.15 dated 07/28/2009. Far as I can tell. I'm patiently waiting for an update as well, but I fear it won't happen. I've used Linksys products for years, and love them, but It seems to me, everytime they release a new line of products, they abandon the last generation. Regardless of How old it is. Since the E series is out now, I have doubts they will continue to update the wrts.

Similar Messages

Any Firmware Updates for Z

I have my Zen Sleek over a year now and I was wondering if there has been any firmware updates released for it's
If so where can I find it's
Cheers,
Jaqian

Go to Support->Downloads, then MP3 Players->Zen->Zen Sleek.
PB

Any firmware updates for wrt160Nv2?

i was wondering if there have been any firmware updates for this router. right now my status is Firmware Version: v2.0.02.

Then Firmware on your Router is already the latest one i dont think you Router needs an Firmware upgrade.

Will Nokia Release any Firmware Update for "E66 R...

I'm using nokia E66 RM-343 , which is running the firmware version 510.21.009.
I know , nokia dropped support for symbian platform and currently working on wp8.
Will there any new firmware release for E66 ?
Thankx in advnc.
{ ¥-€-@-h }
Solved!
Go to Solution.

K...But the real prblm is, my phones previous firmware version was 410.xx.xx. And i updated it to current available ver 510.21.009.
After update , i noticed some prblmz, camera settings restore each time when using camera,
And also the main thing is the GPS. My GPS worked fine with firmware ver 410.xx.xxx . Before location lock within 30 sec or even less than a minute, but after update it struggles to get a fix on location even after 20 min. I used ovi maps, google maps, but it does not giving me the correct location. I hope if i can downgrade to previous ver , what can i do ??
Thanx.
With regards
{ ¥-€-@-h }

WRE54G will not take any firmware update

My AP does not show any version # on the AP its self but when you go in to the setup it shows Firm ware ver 1.04 May of 2004. I hve never got either of the 2 AP's to connect up to my router and yes it is the correct router.
Nebhor wanted to used them on his network correct router also no good. Talked to Tech for 3.5 hrs trying to get them to work but no luck. I have had these for 1.6 years, tech support said to up date the FW but when I try any of the ver 1-3 it say's wrog firm ware ver 2 & 3 are the same file.
Any thoughs?

Try upgrading firmware using TFTP applications…go to ftp://ftp.linksys.com/pub/network/ and save tftp.exe file on computer and try upgrading firmware on WRE54G…check whether it works or not and let me know…

Any Firmware Updates on Nokia X6-00

Hi All,
Nokia just came up with Symbian Anna. Would it be legitimate to expect any low-hardware-supported version for Nokia X6-00, in the near future. I simply dont expect that Nokia obsoletes the other S60v5 Phones, just in the race to gain momentum and scalp up Windows. I still am an ardent fan of Nokia and own a Nokia X6, would love to have new software updates on it.
Thanks,
Santosh.

There will be no Anna for the X6,other than that you will have to wait for an update and keep checking in,im sure somebody will post an update when there is a new update.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Any new firmware updates for Linksys E2500 yet?

I heard about this http://www.komando.com/news/241801/self-replicating-virus-infects-and-breeds-inside-linksys-routers and wondering if there are any firmware updates yet but I havent seen any unless one is being worked on?

If your router is infected, you can reload the same firmware and get rid of it (but of course make sure you disable or change the remote management port so it is not still vulnerable). The new firmware expected to come out will fix the vulnerability, but in the meantime, you can stop the attack by reloading...rebooting won't do it.

WRT54G2 V.13 Firmware Update?

Hey all,
Does anyone know if there is any firmware updates for version 1.3? I checked support page for the WRT54G2 but had no luck.
-Thanks

The latest firmware version for your router is Ver.1.3.00 (Build 28).

Can't find firmware update in folder it's supposed to be in

I just purchased the iMac software install CD for Mac OS9.2 and tried to install it on my very old blueberry imac which is now running 8.6. I started the computer up from the CD and everything loads in correctly to start but when I try to install it, a message comes up saying that the firmware needs to be updated and that it is in the CD extras folder. When I open that folder I don't see anything that says anything about firmware updates. Am I overlooking something or is it called something else and I'm just not looking for the right thing? I've exhausted every book I can find and there isn't much about OS9 or firmware in any of them. I don't have that computer hooked up to the internet at the time so I can't download updates. I have access to an iMac (intel) if I can do something to a disk (I've honestly never tried it yet with the new iMac) I just hope you aren't going to tell me I bought the wrong disk, I have a dreadful feeling that $40 later I'm out of luck. I've already been majorly taken by the apple store that screwed up this computer in the first place (sold me and installed the wrong memory, then when nothing would work properly said the memory wasn't right, they took OSX out and said it would not run on this computer, installed OS9 without charging me because of all of the problems, but never gave me a disk for it. Then one day the dreaded blinking question mark appeared and OS9 would never run again so I'm back to good old 8.6 and thought I'd try again. I'd appreciate any help you can offer. It would mean the world to me if I could get this running in OS9.
blueberry imac 333MHZ Mac OS 8.6 or Earlier upgraded memory

Hi, KAC13 -
As Niel has stated, the OS 9.1 CD, p/n 691-2746-A, will work.
The p/n for the retail OS 9.2.1 Install CD (North American English) is 691-3334-A.
Both of those CDs will contain any firmware update required in order to install that version on your model. It would be advisable to test run the disk before proceeding to remove your existing OS 8.6 - boot to it, then try the installer. If you get the "your need to update the firmware" protest at any point, you will still have OS 8.6 on the machine and so be able to install the firmware update.
If that protest does occur, copy the sub-folder containing the firmware update for your model from the CD to the hard drive before trying to install it.

Firmware update N80 with Vodafone

Well finally last night I got to upgrade my N80 to 4.0623.0.41 of the firmwear. I was so happy...........
..until I started to use my phone, pronlems and lots of em.
Themes that I have used before on my N80 and have functioned/looked as they should. Now in idle mode, have a hole in them, through to some theme I dont even have. (The area looks similar to where a picture would go if you choose one in edit theme)
I can't pair with my Mac now, this used to be one of my most reliable bluetooth connections, even though I read elsewhere people were having problems with this.
Also, until I did a firmware keypad restart, it wouldn't open themes. Well it would, but it would crash and kick me out straight away. This is fixes now.
I cold take pictures and they would not show in gallery. But there where on phone as I could explore to them.
But what a joke, I really am slowly loseing faith in Nokia, looks like I'm joining quite a few people. I thought I would never get any other phone apart from nokiaMessage Edited by stevieh590 on 14-Nov-2006
03:51 PM

Sincerely, you think it might work cos you read somewhere it is supposed to work or it might work cos you've seen it working or at least somebody actually told you it worked?
I'm having the same problem and I've read through ALL this forum and NOWHERE I've read no whatsoever working way to solve this issue. And the fact that this is entirely Creative fault never cease to amaze me. We updated the exact way the instructions ordered and the updater killed the player.
Now I believe that there is a part of the problem that the admins still don't fully grasp, and that's the fact the the updater, any firmware updater, once the issue manifests, DO NOT see the player connected anymore. Although it is in reality connected accordin to Windows and the typical symbol of successful connection on the player. Connection that it is not useful for the updater NEVER see it anymore and the player won't go out of Recovery Mode because of the simple life fact that THERE IS NO FIRMWARE IN THE PLAYER, hence even battery recharging it is going to be an issue.
Still can't believe why they keep that updater online.
"If you have an unhappy customer on the Internet, he doesn't tell his six friends, he tells his 6,000 friends."
Jeff Bezos, CEO - Amazon.com

Advice needed on firmware update-

Hi everyone… I have successfully replaced the HD on my kid’s imac G3 [yay!] but the [secondhand] disk is running a very old version of OS X [10.0.4, I think…]. Can anyone let me know if I need to carry out any firmware updates before installing Tiger? I’d be so grateful for your advice… many thanks!

Hello,
If you need firmware updates, then you'll have to re-install OS 9.1 (or 8.x or whatever version came with your system) to install the updates.
You cannot update the firmware from OS X on the older iMac G3 systems.
If you already have the latest firmware revision, then you may not need to worry about re-installing OS 9 to install the firmware updates at all.
Take a look at this discussion here:
http://discussions.apple.com/thread.jspa?messageID=2707137&#2707137
That discussion will show you how to check the version of Firmware that you currently have.
This will help to determine if you already do have the latest version installed.
Keep in mind that the firmware revisions shown in this discussion relate to the iMac G3 333 MHz system.
If you have an iMac G3 350 MHz or faster (the ones with the slot-loading CD-ROM Drive), then your firmware revision numbers should be 4.19.
The firmware version / update for the slot-loading CD-ROM drive machines is here:
http://docs.info.apple.com/article.html?artnum=75130
For the older iMac 333 MHz or other iMacs with a tray-loading CD-ROM Drive, the update you would need is here:
http://docs.info.apple.com/article.html?artnum=60384
Note, that you will need to re-install which-ever version of Mac OS that came with your computer to install these firmware updates.
But, if you find that you already have the latest firmware version for your computer, then you can skip re-installing OS 9 (or whatever came with your system) all-together.
If you cannot make sense out of the numbers you find when comparing them to the update, let me know what the numbers are that you find, and I'll see if I can help you out.
If you do re-install OS 9 or OS 8.6 (whichever is needed for your system's updates), then also consider getting the other updates for your system while you are at it:
http://docs.info.apple.com/article.html?artnum=58174
You'll find updates for your modem, and CD-ROM drive there.
I hope this helps.

Nokia 9300 firmware update???

Is there any firmware update available for my Nokia 9300 v 4.53 (00)22-12-2004 RAE-6???

Hi mukeshinsaan,
Thank you for your post. You can check if there is any new software for your device by downloading and using Nokia suite which you can download from the link below and then select the link under the Nokia Suites for your PC section:
http://europe.nokia.com/support/product-support/nokia-9300/pc-software
Once you have downloaded this if you go to tools and then click software update or you can click the quick link (Its a green arrow icon) and then click refresh. This will then check if any new updates are available.
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Are there any firmaware updates for time capsule?

Are there any firmware updates for Time Capsule/Time machine?
I just had a new hybrid (SSD and spinning disk) drive (750 GB) installed on my MacBook Pro and used Boot Kamp to partition it and run Windows xp. Now, my previously working Time Machine won't function. It says the "sparsebundle" is open (or in use) preventing the back-up from working properly. When I try and remove and re-install Time Capsule as the disk to back-up to, it still doesn't work. My plan "B" is get a second Time Capsule and dedicate it to the MacBook. But, I fear I'll face the same problem.
When I open to reconfigure Time Machine, the Time Capsule disk is identified as the back-up, but it's also seen in the "available disks to use for back-up" along with with Boot Kamp disk which is part of the new SSD hybrid hard drive just installed. (Remember it's the partitioned part running Windows xp.)
I've unplugged/plugged-in the ethernet internet connection and the power cord many times to no avail. The message still says the sparsebundle is in the way.
Do you think deleting Boot Kamp disk from the list of available hard drives might solve the problem?
Bill in Tulsa

TM can only use AFP and only on disks formatted HFS+ (ie Mac Extended Journaled) so it should not bring up a boot camp partition as a possible destination at all .. but I have not done that seutp.
It says the "sparsebundle" is open (or in use)
That error is well known. It should simply required the TC to be restarted..
That sometimes gets things working where the simple restart won't.
I would recommend using short names, with no spaces and pure alphanumeric.
That is C9
http://pondini.org/TM/Troubleshooting.html
If you have a more complicated setup.. I would recommend firstly doing a TM reset in the computer.
See A4 in the same reference.
Do a verify then of the sparsebundle on the TC.. A5 but you might need to inherit the old backup if you want to continue an old backup.. A new hard disk will make the TM consider the old backup no longer belongs to the computer.. there is a UUID connection to the actual hard disk used in the backup.
Again read the info in pondini. B5 and B6.
The sparsebundle in use is C12 but there are a number of sparsebundle issues in section C.. C17 is another common issue.
Some of what you have done is not adequate.. eg disconnecting ethernet is not enough.. you need to reboot the TC.

G5 Firmware update necessary? Random problems since Tiger upgrade.

I have a PowerMac G5 (7,2) with a 1.8 GHz PowerPC 970 (2.2) CPU running under boot version 5.1.4f0. I have added memory.
I apparently upgraded from OS 9 to 10.2.8 without running any firmware updates. I quite frankly don't remember. I have since upgraded to Tiger, directly from 10.2.8. (There were OS X versions in between, I'm told. *wry smile*)
I am now having random problems.
The machine won't sleep. Display will but tower won't.
On occasion when I boot it up, I get the blue screen and nothing else; I have to shut it off with the power button and restart.
iPhoto (ancient version) is running agonizingly slowly (better since I did the fix suggested in the iPhoto forum in answer to someone else's question).
A short while ago, (in the last week) I noticed that some of my rules in mail ceased functioning (while others work fine). I deleted and recreated them to no avail. I previously had serious Mail problems that I fixed thanks to Mr. Gost, but those were largely of my own creation, so this latter might be unrelated.
If I'm reading things on the various boards and in Apple's Support forum right, in order to truly fix this I should deal with the firmware, to wit:
1. temporarily remove the memory I added (not factory-installed)
2. somehow (handwave) install OS 9 OR boot up from a OS 9 disk
3. download and install the 5.1.5f2 uniprocessor firmware update that Software Update keeps insisting I need.
4. reinstall the added memory
5. If I've reinstalled OS 9, reinstall 10.2.8 and then reinstall Tiger. (because I can't go directly from 9 to 10.4, right?) Otherwise, a clean install of Tiger might be a good idea.
Is this accurate?
Should this solve my blue screen and non-sleeping issues?
Are those issues indicative of a serious problem, or just annoying?
Is there more than one firmware update I should be using?
Will updating my firmware at this point create more issues than it is worth (as I'm seeing that many people had issues after firmware updates?)
Also, these problems seem to have intensified since the update to 4.10. Can I go back to 4... um... the last update? If so, can you point me to directions?
Sorry to be so verbose. I'm obviously more than a little behind the bell curve on this upgrade. The version of iPhoto I want (6) isn't even sold anymore.

Software updater insists the firmware update I need is 5.1.5f2. The only information I can find on this is on a 2004 page at apple support (http://docs.info.apple.com/article.html?artnum=86117) that states:
These firmware updates cannot be installed when the computer is started up from Mac OS X. In order to install them, you must start up the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk (not from a CD).
When you click on the technical details it says:
Remove any third part RAM before installing this Firmware Update. After the Firmware Updater has verified that it has been completed correctly, you can re-install your third party RAM.
There are other firmware updates, but they don't appear to address the issues I have been having, and they're not what Software Updater says it needs. Am I missing something obvious here?
I will check the USB devices. Thank you.

N70-1 FIRMWARE UPDATES

I have updated my N70 fimware from 2.0536.0.2 to 5.0705.3.0.1, but have not experienced any difference. Is the new Firmware 2nd or 3rd S60 Edition?

Hi mihusain
The N70 is a Symbian S60 2nd Edition phone and any firmware update can't change that aspect.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Any firmware update on WRT610N Ver 2?

Similar Messages

Maybe you are looking for