Any fix for mms and group messaging on iphone4 ios6

Is there a fix for no mms and no group messaging for iphone 4 with ios 6?

what is there to fix, what problem are you having?

Similar Messages

  • My iPhone 4 will not send MMS or Group messages and the MMS and Group messages are on in the settings. Help?

    I keep getting the red mark "message failed" whenever i attempt to send a picture or forward. i checked my settings and MMS and Group messaging are both on. This has happened several times. Help!!!

    I've been an AT&T customer since they were under different names in the 90s and have never heard/seen that. I would check with them. I'd really like to see that error. To get a screenshot on the phone, press the home button and sleep/wake button together quickly and release. You will see the screen flash slightly and hear the camera shutter noise.

  • Any fixes for drag and drop not working in WAD with IE9?

    I have exactly the same issue as is described in WAD Problem - can't modify and Drag&drop in Web App Designer (WAD) doesn't work but unfortunately I don't have the option of going from IE9 back to IE8.  Has anybody found a fix for using drag and drop in WAD with IE9?
    Edited by: Jason Muzzy on Jul 22, 2011 1:09 AM

    Hi Jason,
    Thanks for replying .
    But I am facing this isssue in Web Application Designer. The link which I have shared shows the behavious of cursor while dragging and dropping
    Drop not allowed ("blocked traffic" sign)
    Drill across (arrow pointing to the right)
    Drill down (arrow pointing down)
    Exchange dimensions (exchange icon)
    Add to filter (add icon)
    Remove from filter (remove icon)
    Reorder list (reorder icon).
    This issue I am getting in Web Application Designer itself.In WAD 7.X ANALYSIS TABLE do we have any option from which we can disable drag and drop of cells because it is destroying the view of report output .
    In WAD 7.X we have option of Activate Navigation in ANALYSIS TABLE but if we disable this our context will get disable and it shows the default Browser context menu.We have not provided any such options so that its original layout will retain back .
    The solution they have mentioned to Disable Drag and Drop is not available in WAD ,its available in Analyzer.
    Please let me know if you have found any solution for this.

  • Any fixes for LR5 export error message 'Not enough memory'?

    I have plenty of hard disk space, and the files being exported are only 10MB each. I'm exporting from PEF raw files to jpg's.  Closing and restarting LR5 fixes the issue after two or three goes, but it's getting annoying.  Anyone know of this issue?

    Don't be tempted to just upgrade your RAM, as Windows 7 32 Bit is unable to utilize more than the 4 GB you already have installed.  If costs are an issue upgrade your OS to Windows 7 (or higher) 64 bit first, then upgrade to 8GB of RAM if/when required.
    I have Lightroom 5.4 installed on two Windows 7 64 bit desktops, one with 4GB of RAM installed and the other with 8GB.  I have never experienced a 'not enough memory' error with either, although performance is significantly better on the 8GB system.

  • When I open iTunes, I get a message that "iTunes has stopped working".  I've tried reinstalling itunes, creating a new user file, changing the startup programs, and am having no success in getting iTunes to stay open. Any "fixes" for this problem?

    When I open ITunes, I get a message that "iTunes has stopped working".  I have tried reinstalling iTunes, creating a new user file, changing the startup programs in accordance with articles in iTunes troubleshooting, but am having no success in getting iTunes to stay open.  Any fixes for this problem?

     

  • After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

    After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

    Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
    Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
    Emailed their tech support this evening describing problem.

  • As of today, I can no longer or Excel.  I get this message: You can't open the application "Microsoft Excel" because PowerPC applications are no longer supported.  Is there a fix for this and why ha this all of the sudden happened.  I've rebooted 2x

    As of today, I can no longer or Excel.  I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported.  Is there a fix for this and why ha this all of the sudden happened.  I've rebooted twice and that hasn't worked. 

    The application may be corrupt. Un-install and re-install Office.
    Office 2011 Removal
    Office 2011 Removal (2)

  • I installed OS X 9.0 and I get the beach ball all the time.Any fix for this? problem?

    I installed the new operating system OS X 9.0 and my performance degenerated. Spenning beachball, freezing up, slow for everything. Any fix for this problem?
    I have a Mack Book late 2009

    2gb is the stated bare minimum to run the OS, anything you try to run after that is going to cause exactly what you're complaining about. Your MacBook can use up to 8gb and I believe you'd be wise to upgrade.
    http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.26-whit e-13-polycarbonate-unibody-late-2009-specs.html
    Crucial is an excellent source http://www.crucial.com
    As is OWC http://eshop.macsales.com
    I would avoid the bargain basement brands and be sure to get exactly the right ram or you'll have problems.

  • I've just reformatted my pc, reinstalled master collection cs5, and now it won't install the updates it downloaded, do we have any fix for this?

    I've just reformatted my pc, reinstalled master collection cs5, and now it won't install the updates it downloaded, do we have any fix for this?

    you can update manually, http://www.adobe.com/downloads/updates/

  • Is there any userexit for MIR7 and   MIRO transaction?

    Hai friends,
           Is there any userexit for MIR7 and MIRO transaction at the time of pressing "save as completed" or "save" button. I want to check the sales certificate and invoice verification for the document number entered in MIR7 and MIRO.
    Regards,
    safiq
    NOTE:useful points will be rewarded.

    hi,
    these r the exits related to mir7.
    Transaction Code - MIR7                     Park Invoice
    Enhancement/ Business Add-in            Description
    Enhancement
    LMR1M001                                User exits in Logistics Invoice Verification
    LMR1M002                                Account grouping for GR/IR account maintenance
    LMR1M003                                Number assignment in Logistics Invoice Verification
    LMR1M004                                Logistics Invoice Verification: item text for follow-on docs
    LMR1M005                                Logistics Inv. Verification: Release Parked Doc. for Posting
    LMR1M006                                Logistics Invoice Verification: Process XML Invoice
    MRMH0001                                Logistics Invoice Verification: ERS procedure
    MRMH0002                                Logistics Invoice Verification: EDI inbound
    MRMH0003                                Logistics Invoice Verification: Revaluation/RAP
    MRMN0001                                Message output and creation: Logistics Invoice Verification
      Business Add-in
    INVOICE_UPDATE                          Business Add-In: Logistics Invoice Verification
    put a break point in each exit,like break username and test the transaction .

  • Any fix for X-FI screech of death? *sound clip included for downlo

    http://members.cox.net/arfett/lamexfi.wav
    You can listen to it for yourself. Happens in certain games like conflict global storm if you turn the music all the way down. That clip happens to be from FEAR Extraction Point in which it happens throughout 90% or more of the game which makes it really no fun to play at all. The only thing that "stops" it is going into the bullet time which is only a temporary fix as it just starts right after leaving bullet time. It's happened in a few other games just temporarily or in certain situations on both of the X-FI xtreme music card's I've had. I never have the same computer for more than 6 months as parts are switched out with upgrades on a monthly basis and on numerous Nvidia chipsets from nforce 3/4 and nforce 570 it always happens. I format for one reason or another every 3 weeks or so and every time I always download the latest graphics/chipset/sound/anything drivers for every piece of hardware I have so I've had this problem across at least the last 20 versions of drivers for everything I have so I know for a fact it's these **bleep** sound cards. On every single board I've had since experiencing this problem for the first time I even tried every pci slot on my motherboard every time with no success fixing the issue.
    For those interested my current setup which is soon to be once again 00% overhauled (which I'm sure won't fix the problem) is an AMD 5200+, Abit KN9 Ultra nforce 570 motherboard, 8800 GTS and X-FI xtreme music.
    Is there any fix for this or is creative aware of this problem and allow us to send them the card for one without this defect? I know I've read in the past other people were having the issue but it didn't bother me enough at the time to do anything about it.Message Edited by arfett on 08-29-20070:44 PM
    Message Edited by arfett on 08-29-20070:45 PM

    It does it in game mode or entertainment mode. In 2 weeks I'll be on an Asus P5K motherboard with a Q6600. I know deep down I'm still going to have this problem, but part of me has hope it just might do the trick.
    After some further troubleshooting I found a way to get rid of the screech in Extraction Point. If the music slider is set about 5 or 6 notches from maximum it won't screech. any higher or lower and it screeches. In conflict Global Storm it was caused by turning the music completely off so it seems it's some form of incompatibility with music volume in games. It's done it on both of my xtreme music's (I bought a 2nd one because I thought I must have just bought a defecti've card) so I think I might try one of those Auzentech X-FI cards and see if I have any better luck since they actually put quality components around the X-FI chip, unlike Creative.Message Edited by arfett on 08-3-200703:4 AM

  • After upgrade to Mavericks I have to shutdown using the power button.  Any fix for this?

    I have a mid 2011 iMac, just upgraded to OSX Mavericks.  It will no longer shut down using the menu.  I have to push and hold the power button.  This sometimes results in a very loud "snap" from my machine.  Tried reinstalling but still does the same.  Any fix for this?  If not, how do I redownload Mountain Lion?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • HT3529 IMessage and Group Message question

    with iphone 4S if I turn off iMessage and group message and someone sends a message to me and other people, will my reply "reply all" to everyone the message was sent to? Or is it only that when I send to multiple people their responses are only sent to me?

    You can send a message to multiple recipients using SMS, MMS, and iMessage.
    Group messaging allows you to send messages to multiple people and have any responses delivered to everyone in the group. Group messaging works with iMessage and MMS.
    If you send a message to multiple recipients without group messaging in use by the sender and all recipients, an individual message will go to each recipient using either SMS or MMS. Responses to these messages will be delivered only to the original sender in seperate messaging threads.

  • Any fix for touch pad issue in mac book pro on windows 7?

    Hi, I've recently installed windows 7 and parallels in my mac book pro. While i run windows with the parallels track pad, scrolling and right click are functioning properly. But when i logon to windows directly none of them are functioning.
    Pls lemme know if there is any fix for this.
    Thanks

    KiranJJ wrote:
    Running Windows in parallels from the BootCamp partition messes the original installation. My experience. You will have to remove the parallels virtual machine from mac and did a complete reinstall of Windows later.It is better to keep your virtual machine separately.
    This is not true. Running Bootcamped Windows from Parallels or Fusion does not impact the Bootcamp installation of Windows. It just provides a different access to the single Windows installation. Both Parallels and Fusion support this configuration and instructions for how to use Bootcamped Windows as the virtual machine's tartget operating system is included on each virtual machines's respective site.

  • Nokia 928. Latest win 8.1 software. Can not get MMS / picture / group messages

    MMS on my Nokia 928 use to work. After an upgrade is doesn't work (? - could be a coincidence it happened after an upgrade?). I get the message "Get media content now."  Tapping on the link doesn't do anything.  Doesn't matter whether I'm using wi-fi or cellular data. If I go to Settings > Cellular+SIM > SIM Settings > add MMS APN, the fields are blank. At the microsoft support site it says to save your settings, but it doesn't tell you what these settings should be. The fields on this form are APN, User Name, Password, WAP gateway, WAP gateway port, etc, etc.   Should this form be filled in? If so, what are the settings?
    I need both picture messaging and group messaging. Right now it is broken.
    Joel

        HFGuy, We certianly know the importance of ensuring your MMS is working properly. Let's look into this. Do you notice this error occuring when you are connected to our 3G/4G LTE network or Wifi? Are you receiving this error message when trying to send MMS or receive? Also, can you please confirm the current software loaded on your Nokia 928?
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Printing with an HP Laserjet P1009 through a time capsule

    hello I have an HP Laserjet P1009 and a macbook Pro. I can print from the macbook to the laserjet just fine if it is connected directly (USB), but I am trying to connec the printer to my time capsule and print through there. I saw a previous post wit

  • I have a unique problem with Typekit and Creative Cloud

    I've had CC membership for a few months now and have downloaded it onto first a laptop then a desktop. I'm having trouble on the desktop. When I try to access and download typekit fonts through an application or creative cloud, I'm getting a message

  • Why can I no longer Save As a Word document?

    I work in Pages, but whenever I need to send a document to someone I convert it to Word since most people seem to use MS Word. It's never been a problem, until today. I go to Save As... under the File menu and try to save a document titled "XYZ" as a

  • 3d Repousse is grey , Not working in Cs5 extended

    Very curious why other 3d programs work on my laptop (bought new in 2009) like Poser 8 , Facegen but not on CS5 Extended .. Cs5 says that my video card is not supported , i would have to buy a new video card upgrade . I really do not understand why t

  • Multiple webapp timeout

    I am working on a website using JSP and Servlets that contains multiple webapps. A user could potentially leave one webapp and spend a large amount of time in another before going back. We would like to find a way to prevent timeout from occurring if