Any fixes available yet to the 4.3 "upgrade" ??

Like apparently thousands of others, I have had problems with my wifi connection after the 4.3 update. I tried switching off the auto network switch in the advanced settings (that seemed to work for awhile), I tried safe mode with no improvement. The phone keeps scanning for a connection, and when I select my home network (the wireless router is 2 ft, away), it says "Authentication error occurred"  I haven't seen anyone with this message yet. I have triple checked the network key, and my wife's I phone (4) on Sprint has no trouble connecting. Same with her Sony Vaio laptop, and with my old Dell laptop. Never had any problems before connecting with my S4. While the S4 is more powerful and has some unique features (most of which I have disabled, because they are unnecessary and somewhat creepy), it seems that I had a much better overall experience with my old HTC Evo on Sprint.
I have tried to scroll to the latest comments, but have not been able to see if there is finally a fix for this.

You need to start with looking elsewhere, the phone might not be the problem.  Make sure your router's software drivers are up to date. even if all your other electronics hook up to wifi the S4 is the latest hardware and some settings in your router might not be compatable. Change some router settings, like channel number. I like to use channel 11, and broadcast frequency, I use the 2 Ghz band. Stay away from auto modes if they are offered. Reset up your wifi, delete all old passwords and start fresh.  Set the phone up to the router first, then the rest of the electronics. I did all this stuff and the phone works great with the 4 year old Belkin router. I even have auto network switch setting on the S4 turned on and the phone switches between data and wifi as needed. I am using 4.3 upgrade for three weeks and have not had any issues.
Good luck

Similar Messages

  • IPad sync error 1140.  Any fixes available?

    My iPad will not sync.  I get error 1140. Current iPad software version 6.1.3  Current iPhoto version 9.4.3.  iPad syncs when Photos are not included.  Any fixes available?

    Do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!.......
    And try Again!

  • TS2771 only getting sound from one side of the headset.  Any fixes available?

    I have an used Ipod touch.  When i connect a headset, i only sound from one channel.  Any fixes out there?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Any cases out yet for the 5G ipods

    Any cases yet fr the 5G ipods apart from the invinsible shield?. thanx for any replies

    go to http://ilounge.com
    they have a lot of reviews on various cases

  • Are there any adapters available yet, or are we waiting on Scosche?

    I see that Scosche has slipped their release date from June to July. Has anyone else (Griffin, Belkin, etc.) beat them to the market?
    http://www.scosche.com/products/sfID1/210/sfID2/343/productID/1726

    Just got the Belkin adapter at Best Buy this morning. Works great. You can use any headphones, use it in the car with a line-in and I will also be able to use my iPod Shuffle in the pool using a dry bag and waterproof headphones.
    http://www.bestbuy.com/site/olspage.jsp?skuId=9316135&st=belkin+shuffle&lp=1&typ e=product&cp=1&id=1218083841083
    They were $19.99. I couldn't wait for Scosche. Kept putting the date back. You snooze you lose.

  • Installed Yosemite and iPhoto 9.6. A lot of my photos are much too dark now and the colour is not right. Any fix available? I did a backup prior to the new installs.

    Installed Yosemite and iPhoto 9.6. A lot of my photos are now too dark and the colour is way off from the originals. Any suggestions to correct this mess. I did a backup prior to installing Yosemite and iPhoto 9.6.

    Check the monitor settings in the System/Displays/Color preference pane.  You may have to change the color profile used or calibrate the monitor. 
    Also check the System/Accessibility preference pane to see if the Increase contrast checkbox is checked. If it is check it and see if there's any improvement.

  • Just updated to Firefox 3.6.9, I'm building a site and the Dreamweaver CS3 Preview feature no longer works in previewing my pages. Any fixes available?

    Just updated to Firefox 3.6.9 this morning. I'm building a site using Dreamweaver CS3 for a class and the Preview feature was working fine before the update. I can preview my pages in other browsers successfully, but now if I choose Firefox, no window opens.
    I have a Macbook Pro, OS X.

    Sorry, Mozilla did a security fix that broke Dreamweaver with Firefox. Virtually no other programs were broken with that fix, and considering the age of Dreamweaver (~5 years since it was last updated) they decided not to back-out that security fix for one old, elderly program. This problem was discussed at length back in January and February after Firefox 3.6 was first released.

  • Any live wallpapers available yet for the new ipad?

    I do have an S2 droid, some sweet live wallpapers on there. Curious about the ipad world, just got the new one, thank you.

    U r absolutely right Johnathan but still some people might expect something like this by seeing the stuff in some other mobiles like Androids. ofcourse it drains teh battery but it may feels better for some people. for my openion, better we should have something like this in iOS to avoid lacking by comparing with others

  • Safari 7 really slow in Mavericks, any fixes available?

    I noticed Safari 7.0.3 getting really slow. I have a rMBP 15" with 2.6 GHz, 16GB RAM, SSD, yada yada, so I know the HW is up to spec. OS X 10.9.2 (Mavericks)
    Also Chrome of Firefox are blazing fast on the same machine. Yet Safari seems ot start, hesitate and then either load a page quickly or take avery long time to load a page. This is true for various/most websites.
    I disabled the power save feature for plug ins. Cleared the caches (under develop menu). Also Remove All Website data under privacy settings. None produced any real improvment.
    I then found a link that showed to disable DNS prefetching, which seems to make Safari usable again (although still slower than the other browsers).
    http://macs.about.com/od/MacTroubleshootingTips/qt/Troubleshooting-Safari-Slow-P age-Loads-Caused-By-Dns-Prefetching.htm
    Any other ideas on how to fix Safari?
    To be honest this is becoming very sloppy on Apple's part, as not too long ago I had to research here to find a method to speed up browsing in Finder as well. Is Apple becoming Microsoft? (sorry couldn't resist, just getting annoyed that simple items are becoming a hassle on OS X).

    I noticed Safari 7.0.3 getting really slow. I have a rMBP 15" with 2.6 GHz, 16GB RAM, SSD, yada yada, so I know the HW is up to spec. OS X 10.9.2 (Mavericks)
    Also Chrome of Firefox are blazing fast on the same machine. Yet Safari seems ot start, hesitate and then either load a page quickly or take avery long time to load a page. This is true for various/most websites.
    I disabled the power save feature for plug ins. Cleared the caches (under develop menu). Also Remove All Website data under privacy settings. None produced any real improvment.
    I then found a link that showed to disable DNS prefetching, which seems to make Safari usable again (although still slower than the other browsers).
    http://macs.about.com/od/MacTroubleshootingTips/qt/Troubleshooting-Safari-Slow-P age-Loads-Caused-By-Dns-Prefetching.htm
    Any other ideas on how to fix Safari?
    To be honest this is becoming very sloppy on Apple's part, as not too long ago I had to research here to find a method to speed up browsing in Finder as well. Is Apple becoming Microsoft? (sorry couldn't resist, just getting annoyed that simple items are becoming a hassle on OS X).

  • Are there any tools available to find the Server's availability?

    I have been trying to find out a tool/script to figure out the server's complete availability. Please be noted that I need to find only the complete availability for the whole month say July-2014, And there
    are many other reasons that some of these servers would get rebooted every alternate day. It would be sufficient even if I am able to find the total downtime of the server in the whole month from which I can calculate the availability. Please be noted that
    I need to calculate only the server availability and not for any application/service availability. I know we can get the availability report from SCOM 2012. But I have ~3000 Servers which are not in any monitoring tool in fact. I even tried if we can have
    any sysinternals tools but no luck. Any suggestions would be helpful.

    Hiya,
    The Event Viewer will hold events regarding shutdown and startup. You should work on event id's 6005 and 6006.
    Hopefully your 3000 servers has remote powershell enabled or at least some other way of remotely getting the information.
    Basically you should be able to create something like:
    For each connected 6006/6005 events within a given time spand - get the time difference and add all those together.

  • AVI files corrupted(blocking pic & dropped audio). Any fix available?

    I just transfered a lot of AVI files to my external to save some space. They were all perfect before. Now, if I play them from the external HDD or on my internal HDD, they are all corrupt. Every one of them. The picture is all blocky and the audio keeps dropping. I have transfered them to a Windows machine, and they are still corrupt. BTW, I am using the most recent VLC.
    Is there any way to restore these files? How do I avoid this in the future? I really don't understand how they became corrupt.

    Turns out, the FW800 firmware in my enclosure needed to be updated. Fixed!

  • Any Help Available for Minimizing the Shimmer on Photos?

    I've just finished a movie that's made up of photos imported from iphoto. I've burned a DVD and the still images look fantastic... but most of the photos with a Ken Burns move (even a short, gentle move)shimmer like crazy. It's especially bad if there's any kind of line pattern in the image (on buildings, etc). When there's water in the shot, I don't mind the shimmer. But, otherwise, it's very distracting, especially if the shimmer causes people's faces to distort.
    What's behind the problem and what can I do to fix it? I suppose I could remove the movement from all shots but I'd REALLY like not to have to do that. There's not enough time in the world for that... Please advise.
    Diana

    While it is a little hard to tell from your description, what you are probably seeing is caused by the interlaced nature of a television. There are a variety of artifacts caused by the scanning and display processes in television, and even more introduced by the compressed nature of the broadcast signal when you are watching a broadcast. Further, many cheap televisions actually discard about 1/3 of the color signal they receive.
    My guess is that you are seeing flicker introduced by the interlacing. This is a well known problem, and why made for television productions do not use any strongly patterned clothing (watch your evening news, and look how they are dressed - the choices are affected by the technology). Another possiblity is dot crawl, but I am not sure how you would be seeing that.
    This is not something Apple can fix. You can fix it by using images that do not contain sharp transitions between light and dark. That is, soften, not sharpen the images.

  • Facebook sharing and "click to post" not working on Mountain Lion 10.8.3. Any fix available?

    Hi all.
    Just got a 2nd hand MBP 13" (first Mac) and had latest OS installed (10.8.3).
    I used the "click to post" button for Facebook once and it worked... But after that it never worked again (sounds so sad).
    I've deleted my account and re-entered it, but that doesn't work.
    Twitter shares fine, but in the Notification panel, if I click the Facebook button, then the Twitter button stops working as well.
    I think it's something to do with Facebook and the OS (10.8.3) but I don't believe it's a universal problem. A friend's MBP worked fine.
    I can share onto Twitter through other means (eg photobooth, Preview), but Facebook doesn't work anywhere.
    Any help? Or should I wait for some kind of patch update?
    Thanks.

    If you look at the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. It appears you are not the only two having this problem.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Is there any script available to fetch the logged in time of all users in a computer for a month?

    Hi,
      I have been searching for a script ,that fetch the logged in time of all the users in a particular computer for a month.I couldnt find anything.
    Thanks in advance for quick response.
    Thanks and regards..
    Midhun P s

    Hi,
    I suggest looking here:
    http://gallery.technet.microsoft.com/scriptcenter
    It's highly unlikely that you'll find something pre-written that will meet all of your requirements, but there should be enough in the repository to give you a starting point.
    EDIT: If you're looking for someone to do all the work for you, you can try posting a request here:
    http://gallery.technet.microsoft.com/scriptcenter/site/requests
    I have no idea if anyone ever goes through these requests though (I know I don't).
    Don't retire TechNet! -
    (Don't give up yet - 12,700+ strong and growing)

  • What about DVD burning ? Any application available yet ? Toast, Popcorn ...

    I was just wondering how to copy and burn DVD's and CD's using the MacBook Pro.
    I have not heard of Toast or popcorn being universal yet !
    Are there anything out there yet that can be used for the MacBooks ?
    Regards,
    Powerbook G4, Tiger, Ibook G4, Ibook G3, 5G Ipod, Nano, mini   Mac OS X (10.4.5)  

    Is this Toast 7 or Toast 6? I only have 6, and haven’t tried it yet.
    Anyway, Disk Utility should work. Create an disk image of a CD onto the HD, then burn that image onto a blank CD. 2 steps, but should still work. Probably only works on single partition disks though. i.e. not those PC/Mac disks.
    I haven’t use this software, but found it on my travels. Claims to work on Intel Macs:
    http://www.stupidfish23.com/shadowburn/

Maybe you are looking for

  • Secure Communication between SAP R/3 and SAP portal(WAS Java)

    Hi All,    We have a requirement where client says ,there needs to be a  SSL tunnel established between SAP R/3 and Portal(through ITS) to access R/3 through portal Do we have to use SSL for that or SNC?I heard SNC is a mechanism which have to be use

  • What is the best way to create a photo gallery?

    Hi, I want to create a photo gallery in Dreamweaver without using any pre-built "web gallery" function. What's the best way to swap the images when I click the "next" button? Do I create a new Dreamweaver page for each photograph? Is there a more eff

  • ENTITIES and transforming XML to XML/HTML using XSL

    I am going absolutely nuts. When using XSL to transform an XML file to HTML or another XML schema, critical entities dissappear. For example: <oldtag>press "any" key</oldtag> will get rendered to <newtag>press "any" key</newtag> by the XML/XSL parser

  • User Profiles -- A new one appeared, help!

    Working sharing some files between users on my parent's new iMac. Spent all day setting up address book. Now there are is an alias called "mother" that is available to log in and a folder called "mom" that has all the settings that used to be in "mot

  • Is Java 100% Object Oriented?

    Is java 100% pure OOP? I said no.. the reason is we can use primitive data types(which is not a object)also....and also static method which can be accessed without creating objects...Hope u understood my problem. Can anyone give clear idea about this