Any fixes for anchor link problems?

Just finished a website and discovered that one the three anchor links on my page isn't working properly.  When I preview the page in my Firefox browser - everything scrolls/links perfectly except for the very last anchor at the bottom of the page.  Are there any workarounds yet or do I have to wait until the next Muse update?

All we know is that the 3.1 upgrade is in the works. When it will be released or whether or not it will fix your particular issues is not known at this time.
Have you taken your iPhone to an Apple store to have it looked at or replaced?

Similar Messages

  • I installed OS X 9.0 and I get the beach ball all the time.Any fix for this? problem?

    I installed the new operating system OS X 9.0 and my performance degenerated. Spenning beachball, freezing up, slow for everything. Any fix for this problem?
    I have a Mack Book late 2009

    2gb is the stated bare minimum to run the OS, anything you try to run after that is going to cause exactly what you're complaining about. Your MacBook can use up to 8gb and I believe you'd be wise to upgrade.
    http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.26-whit e-13-polycarbonate-unibody-late-2009-specs.html
    Crucial is an excellent source http://www.crucial.com
    As is OWC http://eshop.macsales.com
    I would avoid the bargain basement brands and be sure to get exactly the right ram or you'll have problems.

  • Any fix for MacPro Fan problem caused by the last firmware update?

    Hi,
    My macPro's fans have been going balistic on restart from sleep mode ever since I loaded that last firmware update that was supposed to address the MacPro fan control.
    Any word on a fix... Is this overspeed damaging my hardware?

    It is a bug in the firmware update because my MacPro never acted this way before the update was loaded...
    Many have reported the problem... and some have not experienced it... Go figure.
    Logic says this is not a bug. A bug with the firmware update would be universally felt, no exceptions. Firmware doesn't change its format out of the blue when it chooses to. What it does say is there are some Mac Pros that for whatever reason are not getting sufficient cooling in their position on the desk/floor, or the climate they are being used in. Since Apple does not publish the temperature limits internally for its machine, the best thing is to report this problem to AppleCare, even if the hardware test comes out negative.

  • When I open iTunes, I get a message that "iTunes has stopped working".  I've tried reinstalling itunes, creating a new user file, changing the startup programs, and am having no success in getting iTunes to stay open. Any "fixes" for this problem?

    When I open ITunes, I get a message that "iTunes has stopped working".  I have tried reinstalling iTunes, creating a new user file, changing the startup programs in accordance with articles in iTunes troubleshooting, but am having no success in getting iTunes to stay open.  Any fixes for this problem?

     

  • Any fix for the "remembering passwords" problem with MAIL?

    I've been following the other threads on this topic. I am a new Mac user (all of 5 days) with 10.5.2 preinstalled on a macbook pro, so this is not a migration problem. Applecare has been unable to resolve the issue. My setup is a Verizon FIOS POP account. I've tried all the repairing, creating keychain suggestions. My incoming and outgoing accounts function properly, then they mysteriously forget the login credentials. Is there any fix for this, this seems absurd coming from a PC background? Thanks.

    I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
    Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
    Hope this helps.

  • I have an I Pad 1 with 64 gigs. It constantly drops me off the Internet for no apparent reason. Is there any fix for this problem?

    My I Pad 1 constantly drops me off the Internet and programs. Is there any fix for this problem?  It started after the last update and continues to get worse.
    Doug

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

    After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

    Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
    Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
    Emailed their tech support this evening describing problem.

  • Are there any fixes for iPad 2 with OS 8.1.1.

    Are there any fixes for the iPad 2 IOS 8.1.1?  I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response.  These problems have been occurring since the last update.  At times the iPad becomes unusable.  I have been keeping all programs closed and history and web site data cleared.  Thanks for any help you can give.

    Hi, dannilee,
    I have exactly the same problem. The device was my favorite computer until 8.1.1. Now it runs s-l-o-w-l-y, requires endless reboots.
    To improve the performamce, I have tried these:
    1.Go to Setting->General->Accessibility->Reduce Motion. Turn on.
    2.Reset iPad device settings using Setting->General->Reset->Reset All Settings. Its increase iPad performance little better.
    3.Hold the sleep/wake button and home button upto 8 seconds. This will turn off your iPad. Then turn on iPad. Wait few moments. Do the same thing twice to solve this issue.
    Solution 3 worked for me. And, I always recommend you to backup your iPad first before any action to avoid any data loss.
    Hope it is useful for you.

  • A Fix for Wireless Connection Problems

    I’ve been struggling with connection problems for a week. Thankfully, I found a fix. Your mileage may vary, but this may be your answer:
    Fix for Wireless Connection Problems on MacBook Pro

    Yeah BR, please tell me what your cure is. I have the same setup as you, Vista with the same wireless card you have. Cannot stay connected to the internet. Have spent hours on the phone with tech support and they can't fix it. I hate this f....ing computer, will never buy another one. Please let me know what you did. Once I get it running right I'm selling it and will buy a cheap Dell, never have any problems with them. I have keyboard problems, capital letter problems, connection problems, and download can take 1 to 2 days. Pure BS!!!!!!!!!!!!!!!!!

  • Any fix for the kernel panic issue?

    So far, i've had 12 kernel panics. Usually it only happens when I start iTunes or software update. I read in a developer forum it was because of the NVIDIA Graphics card. So, are there any fixes for the kernel panics with Lion?

    There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
    I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
    If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

  • Any fix for X-FI screech of death? *sound clip included for downlo

    http://members.cox.net/arfett/lamexfi.wav
    You can listen to it for yourself. Happens in certain games like conflict global storm if you turn the music all the way down. That clip happens to be from FEAR Extraction Point in which it happens throughout 90% or more of the game which makes it really no fun to play at all. The only thing that "stops" it is going into the bullet time which is only a temporary fix as it just starts right after leaving bullet time. It's happened in a few other games just temporarily or in certain situations on both of the X-FI xtreme music card's I've had. I never have the same computer for more than 6 months as parts are switched out with upgrades on a monthly basis and on numerous Nvidia chipsets from nforce 3/4 and nforce 570 it always happens. I format for one reason or another every 3 weeks or so and every time I always download the latest graphics/chipset/sound/anything drivers for every piece of hardware I have so I've had this problem across at least the last 20 versions of drivers for everything I have so I know for a fact it's these **bleep** sound cards. On every single board I've had since experiencing this problem for the first time I even tried every pci slot on my motherboard every time with no success fixing the issue.
    For those interested my current setup which is soon to be once again 00% overhauled (which I'm sure won't fix the problem) is an AMD 5200+, Abit KN9 Ultra nforce 570 motherboard, 8800 GTS and X-FI xtreme music.
    Is there any fix for this or is creative aware of this problem and allow us to send them the card for one without this defect? I know I've read in the past other people were having the issue but it didn't bother me enough at the time to do anything about it.Message Edited by arfett on 08-29-20070:44 PM
    Message Edited by arfett on 08-29-20070:45 PM

    It does it in game mode or entertainment mode. In 2 weeks I'll be on an Asus P5K motherboard with a Q6600. I know deep down I'm still going to have this problem, but part of me has hope it just might do the trick.
    After some further troubleshooting I found a way to get rid of the screech in Extraction Point. If the music slider is set about 5 or 6 notches from maximum it won't screech. any higher or lower and it screeches. In conflict Global Storm it was caused by turning the music completely off so it seems it's some form of incompatibility with music volume in games. It's done it on both of my xtreme music's (I bought a 2nd one because I thought I must have just bought a defecti've card) so I think I might try one of those Auzentech X-FI cards and see if I have any better luck since they actually put quality components around the X-FI chip, unlike Creative.Message Edited by arfett on 08-3-200703:4 AM

  • Any fix for 24" cinema display periodically flashing black for 1 second?

    This happens at least a few times every hour when I'm using the system. There are many other people experiencing this issue. Is there any fix for this? Is apple aware of this problem?

    I "think" it's a monitor defect. Most seem to have their problem solved by getting it replaced by Apple. I had 2 identical LED 24-inchers -- one would blink, the other wouldn't. I just got a replacement, keeping fingers crossed but it looks good. I seriously doubt it's a problem with your MBP.

  • Any fix for the PC based network printer communication issue with Mavericks?

    Any fix for the PC based network printer communication issue with Mavericks?

    I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
    Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
    Hope this helps.

  • My iPOD classic (last generation) shuts off when jostled--like what happens when the headphones come out.  Any fix for this?

    My iPOD class (last generation) shuts off when jostled--like what
    happens when the headphones come out.  Is there any fix for this?

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • After upgrade to Mavericks I have to shutdown using the power button.  Any fix for this?

    I have a mid 2011 iMac, just upgraded to OSX Mavericks.  It will no longer shut down using the menu.  I have to push and hold the power button.  This sometimes results in a very loud "snap" from my machine.  Tried reinstalling but still does the same.  Any fix for this?  If not, how do I redownload Mountain Lion?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Maybe you are looking for

  • Error while executing ADobe Interactive form

    Hi I had created TRAVEL REQUEST interactive form as per the document.   Im successful till deployment.  But then while running the application Im getting the below stack com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: failed to created d

  • Vendor Return not possible in Intercompany STO

    Hi, I am getting the following message when I try to tick the Returns Item check box for an Intercompany PO: No delivery type for returns processing assigned to item 00020 Message no. ME392 Diagnosis Shipping processing for a returns item is only pos

  • Upload Task List Operation long Text using SAVE_TEXT-Urgent

    Hi , I am trying to create Task List Operation Long text using the function module .. SAVE_TEXT .I am passing the following keys Text Name       300ATEST057 0000000900000009 Language        EN Text ID            PLPO Long Text Text Object     ROUTING

  • File Content Conversion Step by step

    Hi experts,                 I searched the forum more than once to get the File content conversion scenario. I need with sample input file and output file. ie what type of file we are giving as input and what we are expecting output in FCC. Please do

  • No meNo media player of any type is wkg.

    No media player of any type is wkg. Windows "SFC/Scannow" reports resource protection found corrupt files unable to fix. My product no: A1T53UAR#ABA OS: windows 7 home premium, Happened after repairing wireless by system restore and coping a dvd cd.