Any -FREE- LOGIC videos online ala like ASK does for REASON or ONLINE via

There used to be a company I think called VTC, looking for both FREE video tutorials on Logic as well as Online services that you can pay monthly.
I know about asklynda and there $300 for a year which includes all files, which is a good deal.
But looking for FREE and other even some that may offer/charge by the week!
Thanks!

Hey, isn't this the same guy that does the Pro Tools LE and Maudio and Digi Strike vids?
Sounds the same.
You know, there is a known fact, that US citizens trust the voice of an englishman more than an American, thus many infomercials on TV are done with England accent.
Weird.

Similar Messages

I had a code to get logics pro for free and after it installed its asking me for a serial number does anyone know what to do from here.

I had a code to get logics pro for free and after it installed its asking me for a serial number but it never gave me one to put in, it just started downloading and then asked me. Does anyone know what to do from here.

I really don't think that is anywhere near on track.
Most likely the trial version was installed earlier, is that correct?

I want to download some free from iTunes Store but keep asking me for credit card. How will I download for free.

I want to download some free from iTunes Store but keep asking me for credit card. How will I download for free without asking for credit card.

No credit card. Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
It is important to understand that these instructions apply to the creation of a new Apple ID with an email address not previously associated with an Apple account.

Know of any free Logic ES2 patches (or other logic synth)? NOT EXS

Hey there - looking to see if anyone can point towards some free patches for the ES2 synth, or any other synth in Logic Studio. I'm primarily looking for synth patches, not EXS samples for the reasons of the expression that available to you when you use an actual synth.
Anyone have any ideas? I've googled quite a bit and found a few sites charging for new patches, but that's it. Let me know. Always hungry for new sounds.
~Robb

You'll find a mixed bag of stuff here:
http://www.logicprohelp.com
(need to register and then look under "Plug In & Channel Strip Settings")
hth
Chris

Any free way to encode 5.1 audio track for DVD?

Besides the limited 3-use SurCode for Dolby Digital that comes with Premiere, is there any free way to encode or convert a 5.1 PCM WAV file to a surround format for DVD?
Thanks!

I can't find the post, but I saved it...Here it is:
Like most of you, I was annoyed to find out I couldn't create AC3 surround sound files with my CS4 software, and also that we got downgraded from Audition to Soundbooth. We all paid a lot for it! I know many people have ranted about that already, so enough said.
Here is a workflow that gets around that problem without ponying up for the SurCode Plug-in, and/or buying Audition!
To convert your mixed 5.1 audio, or stereo audio, to the DVD standard AC3 file that Encore wants, download the latest version of Audacity here:http://audacity.sourceforge.net/ It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. If you don't know already, it's free!
Now, before I start getting flamed, about Audacity, it works great! The UI is not the most modern, but the quality is top-notch. I've used it for years and most complaints about it are unjustified.
You'll need to download the latest version: "Beta: 1.3x - for advanced users." There will soon, I hope, be an Audacity 2.0 stable release. Until then, use the Beta release for this workflow.
Note: I'll focus on Premiere Pro CS4, because that is where I originally troubleshooted this, but something similar will work for the other Adobe products that use sound.
Workflow:
Create your mixed 5.1 surround sound audio in Premiere, and output the audio only by going to File > Export > Media, and selecting "Windows Waveform" as the output. You should only have "Export Audio" checked. Verify the format in the Summary section. You should see something like: 48000 Hz, 5.1 Surround, 16 bit. Now under Audio codec, make sure "Uncompressed" is selected. Click Okay, and Adobe Media Encoder should launch. Click "Start Queue" and your audio file will be created. You'll get an interleaved 6 channel wave file. Not all applications will open it, but Audacity will.
Note: When you mix your surround sound in the Audio Mixer, you'll place your little "Puck" where you want the sound to come from. Picture yourself in the middle of the "dish," if it's a puck, isn't it in a rink, as in hockey rink...ah, but I digress. Anyway, you'll notice that volume meters in the 5.1 (6 channel) Master section are laid out in the following order: L,R,LS,RS,C,LFE. Also, if you open a 5.1 audio file in the Source panel, you'll see the same order from top to bottom: L,R,LS,RS,C,LFE.   Soundbooth also does it that way. Ahh....Adobe...nice try.
The actual channel order should be L,R,C,LFE,LS,RS. That's the order that you'll probably have to assign in the "Audio Output Mapping" section in the properties menu to get your channels to play correctly with your surround sound hardware. L,R,C,LFE,LS,RS is also the order that interleaved files use. So after you create your 5.1 file, and open it in another audio program that displays them in the "proper" order, like Audacity, you'll see your tracks laid out from top to bottom in that order. I'm not sure why Adobe does it that way, but oh well.
Surround sound primer:
The LFE channel is not, despite popular misconception, a subwoofer channel. Bass from all the channels in a surround sound Amplifier is summed and sent out to the Subwoofer. The LFE channel is supposed to be used only for very low frequencies, to create extra ...oomph. I think that is the technical term. It is not supposed to be used for bass frequencies from the other tracks. It is for explosions, dinosaur footsteps, ...etc.
Audacity will open DVD ".vob" files, and even let you select which stream (usually Language) to open. As an example, open up a movie with some action in it like Ironman (The movie starts at "VTS_03_1.vob") and look at the LFE channel. It's the 4th track from the top in Audacity. You'll see it's silent except at parts where there is thumping AC/DC music at the Intro, or explosions. It's not used as a subwoofer channel!
With that in mind, you may have noticed, unless I'm missing something, that there is no way in the Premiere Mixer to assign an audio track only to the LFE channel. Sure, you can dial up the "Bass Clef" knob to 0.00 db, and send a mono channel's audio to the LFE channel, but there is no place to put the "Puck" that only outputs to LFE. There is one for the center channel, but without someplace to put it, your 40 Hz dinosaur footprint "Thump" is going to also be assigned to some of the other channels. Which channels depends on your "Puck" placement. This is not correct. Again, unless I'm missing something, Adobe needs to correct this oversight. We'll get back to this problem with a solution later, but first let's continue with the AC3 issue.
At this point you should have your wave file. If you want to apply any global changes to all 6 channels, you can open it in Adobe Soundbooth and trim the beginning or end, and apply effects to the entire file. You cannot, however, make changes to individual channels. Audacity will! We'll get to that later.
Encode with Audacity:
Install the software and go to Edit > Preferences > Libraries, and click on "Download" for the "FFmpeg Library." This is the library that Audacity will use to create the .AC3 file. Once installed, the library version should show up next to "FFmpeg Library Version" While the "Audacity Preferences" window is still open, select "Import/Export" and select "Use Custom Mix", this is used to export a 5.1 channel file. Now you're ready to open your .wave file from Premiere. Drag and drop it in the Audacity workspace and you should see 6 mono tracks laid out from top to bottom in the following order: L,R,C,LFE,LS,RS. Audacity will let you edit the individual tracks, unlike Soundbooth, thanks Adobe. But for now, we'll keep it simple. Set your "Project Rate" in audacity in the lower-left corner to what you want the AC3 file to be. For DVD, chose 48000 (Hz). If you leave it at 44100 (Hz) Encore won't import it.
Your almost done. Now let's export the file. Go to Files > Export... > and select "AC3 Files (FFmpeg)" in the "Save as type:" drop-down. Click the "Options..." button and set the "Bit Rate:" for your file. For 5.1 AC3 audio, probably 448. Now enter a file name and click "Save." This will open the "Advanced Mixing Options" window. This allows you to re-map the tracks to a different channel order. It should be correct, and it should show "Output Channels:" set to 6. Press "OK" and you're done.
Presto, you have a 5.1 channel AC3 file. Use that in Encore, or whatever DVD creation program you use, and when you play your DVD you'll have full 5.1 audio coming out your surround sound Amplifier. That is if you have one.
Test your file:
If you want to test your file, you can do a couple of things. Since Soundbooth and Adobe Bridge won't even open AC3 files, and Encore will open but only play the Left and Right channels in the preview, you'll have to either import the file into Premiere, or use another media player.
If you got Premiere to play your surround properly, then you can drag and drop the file into the "Project" panel and preview it from there. You will hear all 6 channels in the correct speakers, but I did notice that the quality is not very good. Maybe Premiere doesn't decode AC3 all that well. I heard some crackle that isn't in the file. How do I know it isn't just a bad encoding job by Audacity? Because I played the file with the VLC media player, and Cyberlink PowerDVD on the same computer, and also on a DVD in my home theater system with no artifacts. Maybe Premiere doesn't decode AC3 files well.
The VLC player, will play almost any file in the known universe, and at least on my computer, it automatically played the AC3 surround file, created by Audacity, with all the channels mapped correctly. That's right, full surround out my speakers with only default settings. It's a great player. Get it for free here: http://www.videolan.org/
Test with Encore:
So far so good. Now open Encore, drop the AC3 file in an empty project, throw it on a Timeline and build the project without Video, It will autoplay without a menu this way. If you set the End-Action to the same AC3 file it will repeat continuously. Either burn this to DVD-RW and test it in your DVD player, or better yet, Build the project to a DVD Image instead, and mount it in a virtual DVD   Drive with a program like "Virtual CloneDrive."
If you don't know what that is, or how to do it, it is very simple. Go to:http://www.slysoft.com/en/ and download "Virtual Clonedrive." It is free. It tricks your operating system into thinking you have another physical DVD drive. In fact, it can create up to 8 virtual drives. Now you don't have to waste time burning, and erasing DVD's every time you make a change to a project. You can build your project as a DVD Image from Encore, save the .iso file to your Desktop and "mount" it (load it) in Virtual Clonedrive. You're computer will now think you loaded a DVD into a physical drive, and launch whatever DVD player you have installed. Mine launches "Cyberlink PowerDVD" which plays the AC3 audio-only DVD in full surround sound on my computer.
Building and testing projects this way will save you endless hours. If you need to make a quick change, just "Unmount" the .iso in Virtual Clonedrive, rebuild your project to the same filename, and "Mount" it again. Instant testing!
Now, as promised, back to that LFE Channel problem with Premiere that I mentioned:
Audacity will let you modify the individual channels in your interleaved 6-Channel file. So don't put anything in that channel in your Premiere mixer. Leave the "Bass Clef" knobs at full CCW position ( -00 db ). The bass from the other channels will go to your subwoofer automatically in your Amplifier.
Now if you have some low frequency effects files, open them in Audacity. You can open multiple instances of Audacity at the same time by going to "File > New." Then, copy and paste them into the LFE Track at the correct point.
Audacity newbie Hint: Audacity doesn't yet have a "Mix-Paste" function, so to avoid altering the track length as you paste in your clips, do the following: Select the LFE track by clicking on it's info area. The info area should say something like "Mono, 48000Hz" Then press "Delete," That will remove everything from the track. Now copy and paste your clips into the track by clicking once with the "Selection Tool" where you want the clip to start, and selecting "Edit > Paste." If you need to fine tune the position of the pasted clip, use the "Time Shift Tool" to move it left or right. If you work from left to right, then you won't push clips over when you paste new ones in.
There is another way to do this by opening up new tracks, using the "Mix and Render" function, and re-ordering the tracks to maintain the L,R,C,LFE,LS,RS channel order. But that's for advanced users.

Making music videos, QuickTime Pro likes to pause for a second.

I'm making music videos, and some times at the start of the video, or where I add other video to the .mov file, the video likes to pause for 1/4th to a second, then the video like jerks forward to where it should be, while the audio is playing the way it should.
Is there any way to keep this from occuring?
Example (3 megs.)

Your data rate for the video is 4.5 times of what it should be (9240 kbits/s). Try using 2000 kbits/s for the video data rate.
Here are some other factors that can make the video sluggest along with the above:
1) The dimensions of the video is 849x406. The height and width of the video should be divisible by, 16 for best... or 8 for better... or 4 for good. This can effect the encoding (always does) or playback of the video.
Here read this article: http://www.adobe.com/devnet/flash/apps/flvbitrate_calculator/videosizes.html
Even tho the above article is for Flash it also applies to h.264.
2) The audio is mp3, this isn't h.264 complient. AAC audio is... I would change the audio encoding to AAC.
3) And lastly...what program did you use to encode this video with?
I'm glade you supplied a short video. Most people don't. See if next time you can supply at least ten seconds. Thirty second would be the bomb!
I took your video and copy/pasted it to lengthen it to 13 seconds. Encoded with Apple's Compressor...h.264....2000 kbits/s...audio ACC 128 kbits/s... dimensions 848x400
http://www.setfreedenver.org/DemoA/pause_demoA.html
There still is some jerkiness. This is inherent from the footage you supplied.

HT5312 I have never set up any security questions and now it is asking me for one.... how do you answer a question you never set up?????

I have never set up a security quesiton and now it is asking me for one... i have set up 40 ipads so far without personal security info... how am i to respond to a security question i never set up????!

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT2001 Can't write review for any apps. It keeps repeating to ask you for password, and it never goes through.

Everytime I try to write a review for an app the App Store keeps barraging me with Apple ID/Password requests. It will accept my password and run for about 2 minutes and ask me for it again. One review, which didn't go through, asked me for my password three times.

Your profile indicates your Mac as v10.8.1 installed.
If that is correct, updating your system software may help the review issue.
Either click Software Update from your Apple menu 
Or open System Preferences > Software Update and click Check Now.

Any free logic board replacements in 2007?

I got my logic board replaced on my iBook G3 once before under the replacement program. Imagine my surprise when it died again.
I've read here in the forums how people have successfully lobbied for a logic board replacement past the 3 year window. Has anyone been successfully recently in doing this? I called Customer Relations and they told me there was no way I could get a replacement. Any tips on how to get this done?

Hi, and welcome to Apple Discussions.
The most recent report I've seen was this one, received last month from Europe.
You may want to try calling Apple again at (800) 767-2775 and ask for Customer Relations (NOT Customer Service--they can't help you) and ask them to please make an exception to the three-year limit in your case.
If the answer from Apple is absolutely, positively, "NO!" you may want to consider trying the shim fix suggested by John Sawyer in the Apple Discussions iBook G3 (Dual USB) Displays Forum:
[Y]ou can often fix this yourself by removing the iBook's bottom housing, and placing a shim of any sort, about 1mm to 1.5mm thick, onto the raised square on the bottom shield. I use a Scotch mounting square--you can get them in hardware stores and many grocery stores. When you reinstall the bottom case, it will press against this shim, which will press against the graphics chip, and may allow the chip to come into better contact with the logic board.
John Sawyer
CJS Macintosh Repair
Instructions for removing the lower case:
iFixit.com
If Apple doesn't come through, and the shim fix doesn't work (or you're leery of trying it), DT & T Computer Services in Fremont, California offers the cheapest repair I've found. They have a six-month warranty on the repair.
Once you get it fixed, try never to pick it up by the left front corner alone. Rumor has it that can contribute to logic board failure when the case flexes, causing the graphics chip to come loose from the logic board. If you're picking it up in your left hand (as I often do mine), pick it up in the center under the trackpad.
Good luck. Let us know how things go.

HT204266 Can't write review for any apps. It keeps repeating to ask you for password, and it never goes through.

Recent, I have a few apps having problems. I just want to write it on the apps review. I go to the reviews of the apps, and click write a review. First it will pop-up a box with my Apple ID already on the box where I just need to enter password. After I entered password, it will pop up another message box to request me password. This time it also says, "AOL members can sign in using their AOL username and password." Then I click the "Sign In" button on the bottom to enter password again. Then it will just pop up the "AOL" message box again, and I just repeating the same procedure. I tried to input different password. It will reply the password is incorrect immedicately. Thus, I can't write review for any apps now.
I wonder this may happend since the last update of the IOS, and then I have a few apps encoutered problems.

Your profile indicates your Mac as v10.8.1 installed.
If that is correct, updating your system software may help the review issue.
Either click Software Update from your Apple menu 
Or open System Preferences > Software Update and click Check Now.

When you contact Apple support on the phone or online, we may ask you for a 4-digit PIN. This PIN is dynamically generated and only used to verify your identity

Helo, I forgot the answers to my security questions? What to do?

I have no idea of the PIN yo are talking about
From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Is it possible to start a intro display like issuu does for PDF?

On this moment I am building a website for a pilot version. I thought it would be very cool to have a intro like an magazine at issuu.com(First the letter come up and of that the homepage shows shows up after a few seconds?). Is that possible? Is there an example?
Thank you in advance
(For example press any magazine at issuu.com

You can try the suggestions mentioned here :
http://stackoverflow.com/questions/4449893/prioritize-the-content-in-a-webpage-to-be-loade d
http://www.feedthebot.com/pagespeed/prioritize-visible-content.html
Thanks,
Sanjit

Firefox will not automatically convert local pdf URL to include file:// like it does for local html files

I have some local PDFs sorted by navigating some local html files. Firefox recognizes that the html files need to be addressed file:///C:/SD_Online/datasc.html. When clicking the link for a PDF it remains c:/SD_Online/L-R4-106.pdf and I get an error saying "Firefox doesn't know how to open this address, because one of the following protocols (c) isn't associated with any program or is not allowed in this context."

Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by; '''File > Open File.'''

Will the iPhone 6 ever support the BLE feature of the Keiser M3i exercise bike like it does for the Polar H7?

The Keiser M3i and the Concept 2 Rowing Ergometer feature BLE but are not recognized natively on the iPhone's bluetooth menu Is there a chance of this being changed on an update of IOS?

WmCrosson wrote:
The Keiser M3i and the Concept 2 Rowing Ergometer feature BLE but are not recognized natively on the iPhone's bluetooth menu Is there a chance of this being changed on an update of IOS?
iPhone 5, iOS 6.0.1
Maybe you should update your iOS and find out?

Does the iOS5 allow publishing of a contact list group like it does for the Calendar for synchronization?

I want to publish a group list of contacts so everyone in my group can have an updated list of contacts. Does the iOS 4 or 5 do this?

I know that on the Blackberry z10, i was able to do it before i updated to the latest version. All i did was go under bluetooth settings and then select paired, then the device that i wanted to change the name on, then under device name, i selected the name area, which brought up the keyboard, which allowed me to rename the paired device. But with the latest version update, I'm not able to do this anymore.

Any -FREE- LOGIC videos online ala like ASK does for REASON or ONLINE via

Similar Messages

Maybe you are looking for