Any Function module to find the vendor description

Any Function module to find the vendor description.
Regards
Paul

Hi,
Do you mean that you need the name and address details of the Vendor. you can get it in table LFA1.
regards,
Mahesh

Similar Messages

  • Function module to find the Credit limit of a Customer based on Credit Area

    hi Experts,
                       Is there any function module to find the Credit limit of a Customer based on Credit Area.
    Regards,
    Dheepak

    hi
    try this:
      select single * from KNKK INTO zzKNKK
          where KUNNR = xkunnr and KKBER = xkkber.
    credit limit: zzKNKK-KLIMK...
    regards,darek

  • Function Module to find the Last Execution date of Back ground Job

    Hi,
    Is there any function module to find the <b>last execution date of back ground job</b>.
    So that I can transfer the data from SAP to Legacy system based on the document creation date should be in between last execution date and current date.
    thanks in advance.
    Eswar.

    Don't know of a function module, but you should be able to use the information in table TBTCO to get the last start date and time of the job you are interested in.

  • Function module to find the columns in Internal table

    Hi Group,
    Is there any function module which displays the columns of the internal table. I guess there is one cos when we debug any program and select the "Tables" button while debugging and enter an internal table and then do a "Find" the pop up which comes up shows the internal table columns. As this functionality is in the debugger which I cannot debug hence was wondering if some one has come across any such function module. Thanks in advance.
    Regards,
    Ankur Bhandari
    [email protected]

    Hi again,
    1. In the above FM
       Pass Program as SY-REPID (U cann pass other prg name also)
    in FieldName Pass the name of the internal table
       eg. 'ITAB'
    2. This FM will give u the details of the
       internal table.
       The u can display the COMPONENTS table
       using ALV or anyother method u like.
    Regards,
    Amit M.

  • QM : is there any function module to find inspection lot characterstics

    Hi All,
            is there any function module to find all characterstics for an inspection lot.
    i need exact data which qe51n transaction is fetching .
    thanks in adv ,
    Varma

    Hi uvs,
    1. we can use the fm BAPI_INSPOPER_GETCHAR.
    regards,
    amit m.

  • Function module to find the path of application server

    Hi can any one say me what is the function module to find the path of the application server

    Hi ,
    What i understand from ur question is that u need path for application server from the presentation layer i.e user screen.
    u can achive the path this way
    parameter: file type filename-fileintern.
    when user presses F4 here, it will show the directories and path in the AL11.
    I didnt find any FM which will get the path of Al11.
    revrt back if any issues,
    Regards,
    Naveen

  • Is there any function module to get the variables used in a query?

    Hi experts
    Please, do you know if is there any function module to get the variables used in a query?
    Thanks and regards
    Luis

    Hi Srini
    Yes, I have checked the tables but I need a function module
    Thanks anyway!
    Luis

  • Function Module to find the Difference between two times.

    Hi All,
    Wud you plz let me know the Function Module to find the Difference between two times.
    Input Time1( Hours:Minutes) Time2 ( Hours:Minutes)
    Need Output in Hours:Minutes only . ( No seconds Needed )
    Ex :
    Input :
           06:00 to 18:00 Output : 12:00
    and  20:00 to 06:00 Output: 10:00 with +ve sign only. No -ve sign.
    Thanks,
    N.L.Narayana

    check this .
    data : p_timel like sy-uzeit,
           p_timeh like sy-uzeit,
           diff like sy-uzeit,
           di(8) type c .
           p_timel = '200000'.
           p_timeh = '060000'.
           diff = p_timeh - p_timel.
           concatenate diff+0(2) ':' diff+2(2) into di.
           write:/ di.
    also check for this.
           p_timel = '060000'.
           p_timeh = '180000'.
    see if this can be implemented in ur code .
    or else  u can try with  Fm L_TO_TIME_DIFF passing startdate enddate starttime endtime with UOM as MIN
    hope this helps regards,
    vijay

  • Function Module to find the Diff bt Two Times : O/p : Hours:Minutes only

    Hi All,
    Wud you plz let me know the Function Module to find the Difference between two times.
    Input Time1( Hours:Minutes:Seconds) Time2 ( Hours:Minutes:Seconds)
    Need Output in Hours:Minutes only .  ( No seconds Needed )
    Thanks,
    N.L.Narayana

    Hi
    Please use FM
    <b>SD_DATETIME_DIFFERENCE</b>

  • Is there any function module to convert the date format

    Dear ABAPers,
    Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
           I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
    Thanks & Regards,
    Ashok.

    hi,
    create custom function module or copy the below code in the report ..and use it
    the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
    FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
    ""Local interface:
    *"       IMPORTING
    *"             VALUE(DATE) LIKE  SY-DATUM
    *"       EXPORTING
    *"             VALUE(FORMATTED_DATE)
    *"       EXCEPTIONS
    *"              INVALID_DATE
    TABLES: TTDTG.
    DATA: BEGIN OF T_DATE,
            YYYY(4) TYPE C,
            MM(2) TYPE C,
            DD(2) TYPE C,
          END OF T_DATE.
    DATA: DAY(3) TYPE N.
    DATA: VARNAME LIKE TTDTG-VARNAME.
    IF DATE IS INITIAL.
      CLEAR FORMATTED_DATE.
      EXIT.
    ENDIF.
    check document date format
    CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
      EXPORTING
        DATE = DATE
      EXCEPTIONS
        PLAUSIBILITY_CHECK_FAILED = 1.
    IF SY-SUBRC NE 0.
      RAISE INVALID_DATE.
    ENDIF.
    MOVE DATE TO T_DATE.
    CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
    SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
    WRITE T_DATE-DD TO DAY.
    CONCATENATE DAY ',' INTO DAY.
    CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
      SEPARATED BY SPACE.
    ENDFUNCTION.
    the output is :--Convert a DATE field into a full format date eg. March 23, 2000
    Regards,
    Prabhudas

  • Function module for confirming the vendors...

    Hi,
    I just wanted to know whether there is a function module that confirms the vendor automatically instead of going to transactions fk08 and confirming.....
    I even wanted to know how fk08 works.....
    Anand.

    Hi,
       Try the following BAPI'S
    BAPI_CREDITOR_EXISTENCECHECK
    BAPI_CREDITOR_INITPASSWORD
    BAPI_CREDITOR_GETDETAIL
    Regards
    Kiran

  • Function Module to find the day

    Hi,
    I have a date S_DATE with me.
    I need to find the day of that date.
    I hope there is a function module for this.
    Please reply me if you know the name of the Function Module to find the date.
    Thanks in advance.

    Hi Rajesh,
    Thanks for the reply. Your answer solved my problem.

  • Function module to find the attachment list for an accounting document?

    Is there a function module to find the attachment list for an accounting document? Or which table stores such references?
    I know I can find this info from the transaction FB03, but is there a function module to find the attachments for an accounting document? So far I only found the attachments are stored in the table SOOD, and archived documents in table TOA03, but I can't find the table that stores the links between the accounting document and its attachments?
    <b><REMOVED BY MODERATOR></b>
    Thanks,
    Ning
    Message was edited by:
            Alvaro Tejada Galindo

    Hi,
      i_object1-typeid = 'YARSATTA'.  "<<< Give your Object id name
      i_object1-catid  = 'BO'.
      i_object1-instid = i_yarsitem-docno.    "<<<< Document Number
      call method cl_gos_attachment_query=>count_for_object
        exporting
         is_object = i_object1
         ip_arl    = space
        receiving
         rt_stat   = i_stat1.
      read table i_stat1 into wa_stat1 index 1.
      if sy-subrc eq c_0.
         move wa_stat1-counter to v_attno1.
      endif.
    For link you need to check for table SRGBTBREL
    and also please check class CL_GOS*
    a®

  • Any function module to change the mode in Planning board

    Hi guys,
    Is there any function module to change the mode in Planning board?
    I would like to call a custom screen to to chagne the mode since the strandard function cannot show enough info.
    Thanks.

    Thanks Bhanu for ur quick reply.
    Is that enough to change the technical name in the table RSZCOMPDIR.
    Let me give some more information, idea is to change the technical name of all the queries present in a system based on a new naming conventions.
    Eg.
    Change all the technical name of queries ZQSAP to ZQXYZ.
    If there is function module which allows to change the technical name of the queries that not only updates the table RSZCOMPDIR but also all the interlinked tables.

  • Function module to find the previous tax year.

    Hi,
    Is there any fumction module to find the previous tax year if i give sy-datum.
    Thanks & Regards,
    Soumya.

    Hello,
    check this
    HR_GB_TAX_YEAR                 HR-GB: Calculate Tax Year
    HR_GB_TAX_YEAR_DATES           HR-GB: Determine the begin and end dates of the tax year
    or TAXYEAR* f4 in the tcode se37.
    Thank u,
    santhosh

Maybe you are looking for