Any games used with the motion sensor feature on the new ipod nano?

Are there any games, such as the one shown in the comercial where the feature of moving around the ipod is being used. (i think the game was a racing game of some sort) thanks.
(p.s a title for a game would be appreciated)

The Nano commercial doesn't show a racing game.
Are you thinking of this commercial: http://www.apple.com/ipodtouch/gallery/ads/
There is only one page of games for click wheel iPods and I only found one racing game.

Similar Messages

  • Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as two other Windows computers (one running 7 and one with Vista)?

    Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as to store information from two other Windows computers (one running 7 and one with Vista)?

    Yes you can but you need to partition the drive into at least 2 separate drives.
    To do that you need to use a Windows PC to do the first partitioning. Say you split the drive into two partitions each 1TB (or close to 1TB) each.
    Partition fand format both partitions on a Win PC as one NTFS and the other FAT32.
    Then move it to the Mac and Reformat the FAT32 partition Mac Extended (Journaled) with a GUID Partition Table.
    I have that same drive and that is what I did originally with it. I now have it just for the Mac as I have other externals for the Win systems.
    Good Luck.

  • IPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time.  Have looked everywhere and it's driving me nuts.  Thanks for any help on where to make the change!!

    iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc.  Have looked everywhere and it's driving me nuts.  Thanks for any help on where to make the change!!

    iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc.  Have looked everywhere and it's driving me nuts.  Thanks for any help on where to make the change!!

  • Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet.  We also use Juniper NCP client to access our system remote.  A VPN connection is created, but I am unable to access servers on our network.  This works on iPhone 4.

    Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet.  We also use Juniper NCP client to access our local system from a remote location.  A VPN connection is created, but I am unable to access servers in our network.  This same functionality works using my colleagues iPhone 4.
    Both phones are running iOS 6.1.3.  I tried to reset network settings, but still unable to ping servers in our network.  This is a feature that our sales team relies heavily on when out of the office.  Hoping someone has some suggestions on what is different between the 2 phones.

    Hi,
    Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
    Here is an example, share it with you as a reference.
    http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
    In addition, you can refer to the link below for more solution about this problem.
    You Cannot Connect to the Internet After You Connect to a VPN Server
    http://support.microsoft.com/kb/317025
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

  • HT1414 ipod touch..when I plug in to laptop, itunes, I get this message.  "Itunes could not connect toehe Ipod because it is locked with a passcode.  You must enter your passcode on the ipod b/4 it can be used with Itunes"  It is stuck on the cord/itunes

    ipod touch..when I plug in to laptop, itunes comes up and I get this message.  "Itunes could not connect to thehe Ipod because it is locked with a passcode.  You must enter your passcode on the ipod b/4 it can be used with Itunes"  It is stuck on the cord/itunes screen and cannot go any further...HELP

    Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.

  • Does the feature's guide booklet come with a new ipod Nano?

    Hello,
    I'm trying to figure out if the feature's guide comes with a new ipod nano? My sister bought one awhile ago and all that is in the clear box is a Quick Start Guide. I know I can find the feature's guide online but trying to figure out if she ever had a hard copy of the feature's guide booklet as I can't find her copy. Maybe I'm looking for something that is in my imagination.

    Thanks, my sister got an ipod touch the other day with a new Macbook and she told me to get her manual for something I was trying to figure out. So I thought I was using it the other day and can't find it. Now she thinks the touch one is at her office. Then I decided to get all the new stuff together in a bag: her Macbook info, her nano stuff and her ipod touch stuff (she tends to leave stuff all over the place and since I use them sometimes I thought I would organize it all). After collecting it all I wondered if there was something for the nano which I didn't see in the box.
    Anywho now I know the answer for the ipod nano anyway.

  • The app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new.

    the app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new for christmas.

    See the following to purchase earlier, compatible version for iOS 6
    App Store: Downloading Older Versions of Apps on iOS - Apple Club

  • Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

    Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac? 
    Thanks to your feedback.

    Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
    (74380)

  • What do i do if the motion sensor on an ipod touch goes bad?

    The motion sensor on my ipod has went bad. how can i repair it?

    Try the following to rule out a software problem:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If the iPod is defective and not under warranty
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price      
    The sensor is on the logic board and is not replaceable.

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Where is the motion sensor?

    I know in all MacBooks, there is a sudden motion sensor, which stops the hard drive in case you drop it. I'm just wondering if it's in the hard drive or on the logic board or something because I'm thinking of upgrading my 160GB hard drive to a 320GB hard drive from macsales.com and I still want the sensor.

    Logicboard. If it were in the hard drive, then it would be gone when you put in a new hard drive.

  • TS1441 when i pluged my ipod classic 5g to PC then it shows "iTunes has detected an iPod in recovery mode. you must restore this iPod before it can be used with iTunes"?then after restoring the PIOD when IPod restarted then Itunes again detect the same ER

    when i pluged my ipod classic 5g to PC then it shows “iTunes has detected an iPod in recovery mode. you must restore this iPod before it can be used with iTunes”?then after restoring the PIOD when IPod restarted then Itunes again detect the same ERROR.

    If you are using XP, and you went through the procedure at the bottom of the previously linked document to change the iPod's assigned drive letter, and you also tried putting it into Disk Mode... 
    If you have not already, try shutting down your computer and disconnecting all USB devices, including hub.  Start up with only standard keyboard and mouse connected.  Just to be safe, put the iPod into Disk Mode again
    http://support.apple.com/kb/HT1363
    Run iTunes.  Connect iPod to a direct USB port on computer.  iTunes may prompt you about "recovery" and ask you to do a Restore.  Try to do a Restore again.

  • JNI classes to access the Security Filter features of the C API

    Looking for help with managing security filters using the JAPI. Has anyone developed JNI classes to access the Security Filter features of the C API? If so, would you be willing to share your experience and/or code? Time is of the ssence. Thanks in advance for any help.-- Posted for Martin [email protected]@pacbell.net

    Are you talking about the Requirements Gateway?  It is a separate product from NI that will do what you are looking for.  I haven't used it so I am not sure of the API chain to make it work.  Take a look and see if that is what you were thinking of.
    Hope that this helps,
    Bob Young
    Sorry, I just re-read your original post and see that you are looking to also use the Requirements Gateway, so you obviously know about it.  I don't know what the API changes were that made it work so I am not going to be much help.
    Sorry about posting before getting the correct information from the original.
    Bob Young
    Message Edited by Bob Y. on 08-24-2006 04:54 PM
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • Why won't Apple activate the FM receiver feature of the Broadcom  BCM4335 chip?

    Why won't Apple activate the FM receiver feature of the Broadcom  BCM4335 chip?
    I paid for it, it uses less energy, less bandwidth, during emergencies, we would have radio access & FEMA would like it activated.
    I asked an Apple tech on chat and they said there is no FM capability on the phone.  I asked if my iPhone has a Broadcom chip and they ended the chat.  I had to give them my phone number twice, but they never called back with me back to answer the question.  According to NPR the chip is activated in other countries.

    could it be because the iphone6 don't have an Broadcom  BCM4335 chip?
    http://www.chipworks.com/en/technical-competitive-analysis/resources/blog/inside -the-iphone-6-and-iphone-6-plus-part-2/
    https://www.ifixit.com/Teardown/iPhone+6+Plus+Teardown/29206

Maybe you are looking for