Any Good Tools for Charting in J2EE compliant Applications

Hi,
I am looking for Good Tools to draw Chart in Weblogic 6.0 Application.
I know
Sitraka www.sitraka.com
Visual Mining www.visiualmining.com
Visual Engineering www.ve.com
But I am looking something good and cheap.
Any suggestions.
Thanks
Jeyakumar Raman.

It is a web-base application and basically this would be an evolving suite of test cases. For example, if this was a purchasing system. A few test cases that we would like to run would be as such.
1. Enter in a valid Purchase Order verify expected results
2. Enter in an invalid Purchase Order verify expected results
3. Enter a purchase order with one line item
4. Enter a purchase order with multiple line items
5. Query existing purchase orders
6. Edit existing purchase orders
7. Delete a purchase order
ETC.
Would WinRunner provide this functionality? Are there any OpenSource solutions as well.

Similar Messages

Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
Reference: http://www.securityresearch.at/en/development/fortify/
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

Hi Amalaraja Fernando,
I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
SharePoint diagnostic manager
SharePoint enterprise manager
What is SPCop SharePoint Code Analysis?
Dmitry
Lightning Tools Check
out our SharePoint tools and web parts |
Lightning Tools Blog | Мой Блог

Any good tool for creating GUI?

Could anybody tell me any good GUI interface tool to use? very emergency, thank you very much.

Try Borland JBuilder Personal it's 41MB and it's free but the documentation is downloaded separately but it's ~58MB.

Is JDeveloper a good tools for developing a touch screen application ?

I'm trying to figure out whether JDeveloper is good enough.
Any comments ?

i'm a newbie actually to all latest forms / reports / jdeveloper things thus i don't know what is appropriate for our 9.2.0.3 DB / 11.5.9 apps combination since it seems that iAS is not configured well in our current system
(i'm only working for my new job around 1.5 months and trying to figure out some alternatives)
--Eric

When I would like to upgrade my iPad2 at software update of general at settings, loading logo onscreen for hours with no progress. The goal is to upgrade iOS from 5 to 7.0.1. Any good solution for that?

When I would like to upgrade my iPad2 at software update of general at settings, loading logo onscreen for hours with no progress. The goal is to upgrade iOS from 5 to 7.0.1. Any good solution for that?

Connect it to the charger unit as instructed by Apple.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

When will OS X Lion be compatible with Avid's Pro Tools 9, or any Pro Tools for that matter?

When will OS X Lion be compatible with Avid's Pro Tools 9, or any Pro Tools for that matter?

There's less money to be made from compatibility than there is from "forced upgrades." Why would AVID be concerned with their older product working with the new OS when they can release another version for people to pay $250+ for? Free bug-fix download vs. latest software upgrade? You've got two companies with virtual monopolies on the pro audio market. It's a win-win for them.
So what does that say to me about the handful that do not? The incompatibility is a marketing decision, not a shortcoming.
Am I close?

What is good tool for Analyzing Windows Perfmon logs

I have SQL Server 2014 SSAS on dedicated server. I'm starting to collect Performance Counters with Perfmon.
What is good tool for analyzing results? I would like to see graphs about Memory usage etc.
Kenny_I

Have you tried the PAL tool. It is too good a tool for perfmon analysis.
https://pal.codeplex.com/
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Any good site for learning struts using weblogic

Hi all,
Please tell me any good website for learning struts using weblogic. I mean how to creat page and deploy , run it .....
Thanks in advance

Hi,
here is the link for RMI tutorial.
http://java.sun.com/docs/books/tutorial/rmi/index.html

Any good tutorials for using jQuery and ColdFusion to build mobile apps

Does anyone know of any good tutorials for using jQuery and ColdFusion to build mobile apps?
Thanks!
Lee

I was just this moment looking at this website http://jquerymobile.com/
Then for you a Google search on Jquerymobile and coldfusion
http://www.google.co.uk/search?q=jquerymobile+and+coldfusion&ie=utf-8&oe=utf-8&aq=t&rls=or g.mozilla:en-GB:official&client=firefox-a
http://jquerymobile.com/resources/
Brings me onto this tutorial
http://www.raymondcamden.com/index.cfm/2011/8/26/Making-jQuery-Mobile-templates-even-easie r--with-ColdFusion

Any good sites for brushes

Hi all,
anyone know any good sites for brushes for PSE3, I'm looking for the
distressed, scratchy stuff
thanks
Ed

Try these:
http://www.adobe.com/cfusion/exchange/index.cfm?view=sn710
http://photoshopbrushes.com/brushes.htm
http://graphicssoft.about.com/od/photoshopbrushes/Free_Adobe_Photoshop_Brushes_to_Download .htm
http://www.freephotoshop.com/html/free_brushes.html
Also, a Google search on "photoshop brushes" will return a goldmine!
Mark

Is there any monitoring tool for web server and application server ?

experts,
I just want to know that is there any monitoring utility which being used to monitor the web server activities like threads web console session tracking and so on..
I am using Jboss as my application server.If you suggest any monitoring tool for Jboss It would be helpful for me,

You may use jConsole

Deploying BC4J as J2EE compliant applications

Hi.
I've been looking over the threads concerning deployment of BC4J applications into oc4j.
Maybe I have missed the concept of bc4j, but doesn't bc4j act as 'just another runtime library' and be deployed as a standard J2EE library, i.e:
war-file->
/WEB-INF/classes/<all the java-classes, including bc4j packages>
/WEB-INF/web.xml
/WEB-INF/lib/<bc4j runtime libraries>
/<jsp,html,images etc.>
It seems to me that BC4J is not really adapted to a J2EE environment. For example, local file access from an EJB application is a big no-no in the specs.
Is there any plans for a rewrite of bc4j to make it more 'J2EE-compliant'?
Best Regards /Anders

You could deploy the BC4J archives along with each and every WAR file if you want, but this is kind of a waste. Instead, you typically deploy them in the global library directory of your container.
BC4J reads resources from the application context for things like metadata files. Have you found this issue to stop you from successfully running BC4J applications as J2EE EJB Session Beans?
Remember the J2EE includes both Servlets and EJB's. Some customers shy away from the additional complexity of EJB's and build J2EE-compliant applications that work entirely in the J2EE "Web Tier" without using the "J2EE EJB Tier" as well.
BC4J-powered J2EE applications support deploying application components either to the J2EE Web Tier or to the J2EE EJB Tier without requiring code changes.

Are there any recovery tools for optical media?

I've had a couple of DVD's turned in to coasters recently and I was hoping that Linux could come to my rescue with some awesome 'raw-read' / recovery tools for optical media?
I burnt the discs in Windows 7 using InfraRecorder on a brand new Plextor drive (a 'PX-891SA') and these are my first attempts to burn discs with it so I'm a bit worried it could be a hardware fault!
I started off trying to back up some files to clear some space on my hard-drive, burning them to a dual-layer dvd, but the software kept failing to even start the burn process -- that was until I realised that I needed to run the program "as Administrator" (in Windows). It did then manage to burn the disc (I was using "Session-at-Once" mode) however when it came to the end of the burn process / the start of the 'verify data' phase it threw an error saying the write process had failed! Windows couldn't access the disc / data and (I think) still thought the disk was empty. So I restarted the burning application and used a function to just 'close' the whole disc. This seemed to work because Windows was then able to recognise the disc and read the data, although accessing the disc was slow and sounded 'stutter' ish.
I then tried to write a single layer dvd to finish off the last couple of gig I had to back up, but again the software completed the burn phase only to report a 'fail' error right at the end (I'm assuming) before finalising the disc. Although this time I'd tried to create a multi-session disc by using the '2XXA' (or something) 'Multi-Session' iso9660 format. The result was that Windows couldn't read the disc and still thought it was empty, even after trying a forced 'close disc' operation! -- Linux however could read the disc and see that the data had in fact been burnt to the disc (although I've not yet tried copying it in Linux!).
Finally I needed to burn a load of archives to a couple of discs (totaling ~9GiB) -- starting with a dual-layer dvd first everything seemed to be working fine, the burn process started okay and the write buffer was full etc., until at what I assume was the layer change-over it all came to a grinding halt and threw another 'write operation failed' error, only this time I can't even mount the disk in Linux....see 'dmesg | tail' output below:
[ 5758.353005] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5758.353015] ISOFS: Interleaved files not (yet) supported.
[ 5758.353016] ISOFS: File unit size != 0 for ISO file (1472).
[ 5758.353019] ISOFS: changing to secondary root
[ 5758.353035] ISOFS: Interleaved files not (yet) supported.
[ 5758.353036] ISOFS: File unit size != 0 for ISO file (1536).
[ 5758.353037] isofs_fill_super: root inode is not a directory. Corrupted media?
Does anyone have any thought or suggestions that might help?
- Is it likely to be a hardware fault? (I bought a Plextor because I thought they were one of the best!)
Maybe even if I could just close the session all would not be lost?
-- Thanks in advance --
>>>> UPDATE >>>>
I tried to use ddrescue....it was fine until it got to the end of the disk and then it sounded like the drive was chewing on a bag of pork scratchings
$ sudo ddrescue -v /dev/sr0 /mnt/odd/ddr.file ~/ddr.log
GNU ddrescue 1.16
About to copy 4029 MBytes from /dev/sr0 to /mnt/odd/ddr.file
Starting positions: infile = 0 B, outfile = 0 B
Copy block size: 128 sectors Initial skip size: 128 sectors
Sector size: 512 Bytes
Press Ctrl-C to interrupt
rescued: 4028 MB, errsize: 983 kB, current rate: 0 B/s
ipos: 4028 MB, errors: 1, average rate: 3310 kB/s
opos: 4028 MB, time since last successful read: 10.8 m
Splitting failed blocks...
Interrupted by user
...it was taking forever and getting nowhere so I just pressed 'ctrl+c'.....here's the log file:
# Rescue Logfile. Created by GNU ddrescue version 1.16
# Command line: ddrescue -v /dev/sr0 /mnt/odd/ddr.file /home/shodan/ddr.log
# current_pos current_status
0xF0213000 /
# pos size status
0x00000000 0xF0208000 +
0xF0208000 0x0000B000 -
0xF0213000 0x0000D000 /
0xF0220000 0x00000400 -
0xF0220400 0x0001FE00 /
0xF0240200 0x00000400 -
0xF0240600 0x0003FE00 /
0xF0280400 0x00000400 -
0xF0280800 0x00077600 /
0xF02F7E00 0x00000200 -
When I tried to mount the output file using $ sudo mount -ro loop /mnt/odd/ddr.file /mnt/vodd I got the same error as with the actual disc (natch)...
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Last edited by wwgfd (2012-12-14 13:18:41)

@chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
...the other folders did copy okay though!
It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
@ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
@alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
Thanks for the help!
(pre-post) UPDATE >>> I've just mounted my Windows partition in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

Trying to move from xslt to jsp - any good tools?

I'm working on an app where older html is rendered through xslt and newer html is produced with jsp. i really don't care for xslt. I'm curious if there's a good tool that would allow me to use jsp files to access the information in xml. This would allow me to reuse front end code between the two sections.

Well, Java is really good at reading XML (check out DOM or SAX) and JSP uses Java ergo I'm sure you'll be able to read XML. I don't know enough about JSP to know if there are any tag libraries or something that will work but if you just want to use servlets/jsp you can definitely read XML.

Is there any upragde tools for SAP B1 to SAP ERP?

Hi,
I know, SAP B1 and SAP ERP are totally different SAP products.
In my mind, maybe we should implement the new SAP ERP, and then, migrate the old master data from B1 to ERP...
So, is there any upragde tools or procedure (or data migration tools)for the project of upgrade SAP B1 to SAP ERP?
Is there any documentation for this?
Many thanks in advance.
BR,
Randy

It is not listed on the official roadmaps
Lumira:
https://websmp206.sap-ag.de/~sapidb/011000358700000212382013E.pdf
Analysis Office:
https://websmp206.sap-ag.de/~sapidb/011000358700000395262012D.pdf
For Lumira we asked at BI 2014 the other week and they said they were working on it.
You can register for this ASUG Analysis Office Roadmap and ask SAP on the webcast about it:
May 12: Analysis Office Roadmap
Same for Lumira - see these upcoming ASUG webcasts - especially Q&A:
May 15: Lumira Self Service for Business User
May 21: SAP Lumira Question and Answer Session

Any Good Tools for Charting in J2EE compliant Applications

Similar Messages

Maybe you are looking for