Any help expected : During removing ECC6.0 client, too long hours for VBFA

Hi exerts,
Can you provide any solutions or hints for poor performance during remoeving ERP6.0 SPS12 client?
Now, I am experiencing very long processing VBFA with very low IO.
The table contains 760K entries for each of the existing clients.
Meantime, one of them are to be removed.
6.5 hours after starting client deletion using transaction SCC5, VBFA is being removed.
Now, 10 hours later, VBFA is still subject for removal.
there are almost no I/O, except for small number of DirectRead/Sequential Read.
during this, once the client copy has been cancelled intentionally to have VBFA table updated is statistic.
and, restarted -- actually, it's rerun --
ERP6.0 SPS12
Oracle 10.2.0.4
Sun Solaris 10
Any advice should be gread helful.
thanks in advance,
Kohji
sorry for duplicate posting. thanks for the advice at ABAP General, I found this forum.

Official answer:
Check sap note [446485 - CC-ADMIN: Special copying options|https://service.sap.com/sap/support/notes/446485]:
number 5. DWITH_CURS - Deleting with CURSOR WITH HOLD
number 8. LARGEBLOCK - Using large block sizes
number 9. LOCK_SYS - Deletion mode with system-wide exclusive locks
Also have a look at [365304 - CC-ADMIN: Reports for deleting tables|https://service.sap.com/sap/support/notes/365304]
Unofficial answer:
manually delete the rows of the client. I won't give you the statement. If you don't know it, don't do it, stick to the official way.
Best regards, Michael

Similar Messages

  • Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

    have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

    Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • Taking too long time for booting

    Hi there,
    I just bought myself an iphone 5s. . Try to get up started for the 1st time but the thing keep booting or loading too long time for endless hours. What may go wrong? Appreciate if you could help me on this.

    But payment run before due date. you are not run before due date once check it

  • Too long time for editing BEx

    Deal all
    I have a problem with BEx.
    Whenever I edit BEx Query Designer for creating or modifing Query, it takes time too long.
    For instance, when I restrict value in Row or Columns, it need too much time.
    Is there Tcode for checking this problem?
    Or is there something way to solve it?

    Hi,
    Please restart the query designer and check you can able to edit the query faster.
    Also please check the note is related to your performance issue:
    1387593 - Performance optimization for query change/generation
    1416737 - Performance optimization for query change/generation(2)
    1106067 - Low performance when opening Bex Analyzer on Windows server.
    Performance issues can be solved in general by faster hardware. so please check the Hardware parts.
    Thanks,
    Venkat

  • Need Help- Poor Support Has Gone on Too Long

    Quicktime error/iTunes error as follows- I tried running quicktime. It gives me a "Windows needs your permission to continue." Then, it fails when I press continue because "Run a Legacy CPL elevated has stopped working." This must be part of the problem- quicktime. Now how do I fix that?

    +Any help available at all from Apple?+
    This is a *user to user* troubleshooting forum. You come here to ask for help from your fellow users, rather than from Apple. See the help and terms of use for more information about where you're posting:
    http://discussions.apple.com/help.jspa
    +Run a Legacy CPL elevated has stopped working+
    That's a fairly unusual error message. But, working from basic principles, a CPL is typically a control panel file. So perhaps first try heading into your Control panel, click "Classic View" and try to open the QuickTime control panel.
    Do you get an error message when you try to do that? If so, what does it say? (Precise text, please.)
    (Checking on this, because this may give us a heads up on what might be going on with your QuickTime launch problem.)

  • Why iPad2 is taking too long time for a software update?

    Hi, i have iPad2 with iOS 4.3, now I'd like to update to iOS 6.1.2, but it is taking too long time to update when i connect to iYunes.My internet speed is 15mbps.I am unable to understand the problem.Please help me

    Hi, i have iPad2 with iOS 4.3, now I'd like to update to iOS 6.1.2, but it is taking too long time to update when i connect to iYunes.My internet speed is 15mbps.I am unable to understand the problem.Please help me

  • HELP!? Remove 1 page from long document and shift all the rest pages

    Hello,
    I am facing to following problem:
    I have a long document with facing pages. Now I need to remove one left page in the middle of the document and shift all the rest pages one step forward. It means from all right pages do a left and vice versa (started from the page that was removed). There is a continous text int the whole document and left/right strip made from different photos.
    To clarify the situation I am attaching the preview. I have deleted page no.12 and I need to shift page 13 to left, 14 to right after 13, 15 to left, 16 to right after 15 and so on....
    Is there any simple way how to do it?
    Thank you very much for any tips.

    It looks to me as if you may something else going on here. Are you using right-to-left text here so the document binding would be onthe right when the book is closed? If not, your problem is not with page 13 so much as it is with the earlier pages.
    Unless you force it to do otherwise by disabling page shuffling someplace, in left-to-right documents using facing pages ID will always put odd numbered pages to the right of the spine and even to the left, the opposite for right-to-left documents. In either case, it seems like you have page shuffling disabled either for the whole file or for a selected spread. You can re-enable it from the menu in the Pages panel. When ID asks if you want to maintain the current number of pages on a spread you should probably say no. Either pages 1-12 will swtch sides, or 13 and following will, and your spreads will rearrange to put two pages together as they should be.
    If you  have overridden master page objects, a side effect of switching sides on the spread will be that the overridden objects will remain and the new master objects from the other side of the spread will appear behind them.

  • Help! My score notes are too long

    Hello. Does anybody have a simple solution? I need to make scores of some songs. The problem is this: even though the piano roll shows all the notes in their actual length, the score shows the last notes always much longer - as long as there is room. Only way to fix this seems to be putting in tens of "pause" signs, or whatever those are called. Is there any way to get the score show the lengths correctly, as they are in the piano roll?
    Please help!
    Larry

    I wonder what a "pause sign" is a reference to...
    There are a number of associated issues here, and I'm not expert enough to walk you through them all. The score only gives an approximation, but there are a number of options used in the score editor that can help with this including the buttons with the words "Interpretation", "Syncopation" and "No Overlap".
    But recently I've addressed the vast bulk of my midi-to-score problems in the piano roll selectively applying quantize and particularly this one: Functions > Note Events > Note Force Legato.
    In your case you seem to have all the legato you want so maybe the fault likes elsewhere. You might need to look in the event editor and force notes to a certain length.
    Anyway the score editor, and its results, remains the most mysterious part of Logic, apparently even for long-time users. I heartily suggest reading every scrap of the manual on the topic if this is one of your preferred modalities. I'm about to do that this week myself.
    -- Gerry

  • Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

    I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
    The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
    Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
    Thanks

    The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
    If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
    So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
    Assuming your AE is gen3 or greater.
    You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
    And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
    If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
    If your AE is G wireless or earlier model.. really the time has come for replacement.
    If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
    You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

  • I am trying to put the Tony Bennett CD onto my MacBook but since it is duets, it separates each song since it is duets. Any help on how I can get them as one album???

    I am trying to copy the Tony Bennett Duet CD to my MacBook but since all of the songs are duets, it puts them one at a time on my itunes and will not have them listed as an album.  What do I need to set to get them listed together as an album.. Consolidating only puts them together as one song.  Any help?

    Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value).  You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
    In the absence of that option, you will need to restore the content of your library from its original sources:
    Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
    Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
    Content imported from your CDs will have to imported again
    The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these).  Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
    In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above.  As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

  • TS3694 iTunes not recognizing newly restored iPhone! Any help?

    Hi there, My iPod is notonnecting to itunes when I plug it in. > I had just restored it and now when I plug it into computer the "connected" comes up on the iPod screen but it doesn't show up on itunes or desktop as though its not plugged in! Any help?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • I have Elements 9 and cannot download NEF files from my new Nikon1 v1, any help appreciated

    I have Elements 0 and cannot download NEF files from my new Nikon1 V1, any help is appreciated.

    PSE 9 is too old for any of the versions of ACR that support the 1 V1. You have three options:
    1. Upgrade to PSE 10 or 11.
    2. Use the Nikon software to convert the raw files and send the resulting tiffs to PSE for further editing.
    3. Try the free Adobe DNG converter, and you should be able to open the resulting DNGs in your version of ACR.
    Windows:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
    Mac:
    http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

  • How can I delete multiple duplicate songs at one time? I would really like to wipe out my music library and just reinstall all files. Any Help is appreciated.

    I am trying to cleanout my iTunes Music Library. I would prefer to wipeout the music library and then reinstall my music. I do not know how to delete multiple files besides doing one by one. Any help is much appreciated. Thank You.

    Dupin is for Mac. For PC users I've written a script called DeDuper which can help remove unwanted duplicates. See this  thread for background.
    tt2

  • CDs not recognized: ANY HELP APPRECIATED

    Hello,
    I've been an iTunes since the first version and use it on every computer I own. Love it. I am frustrated installing it on some computers at work. I am a music educator and I like to use iTunes to organize and play my library of audio at school.
    I have tried using iTunes (ver. 5., 6, and 7) on several different Dell laptops and have consistently had trouble playing (and importing) CDs. When I insert the CD, the Gracenote (CDDB) window pops up and disappears very quickly (too quickly to read...) and the CD never appears in the left panel. When I Run Diagnostics I get the following:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Latitude D620
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (5.3.4.21),
    UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.6.0),
    Video Driver: Mobile Intel(R) 945GM Express Chipset Family\Intel(R) Calistoga Graphics Controller
    IDE\DiskHitachiHTS721080G9SA00________________MC4OC10H, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYCDRWDVD_CRX850E____________________5DK2___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: SONY CDRWDVD CRX850E, Rev 5DK2
    Audio CD in drive.
    Found 14 songs on CD, playing time 58:03 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:23:57
    Track 3, start time 07:44:45
    Track 4, start time 12:38:60
    Track 5, start time 15:36:30
    Track 6, start time 20:01:54
    Track 7, start time 22:14:32
    Track 8, start time 26:45:54
    Track 9, start time 30:29:67
    Track 10, start time 34:11:32
    Track 11, start time 39:34:62
    Track 12, start time 43:41:25
    Track 13, start time 48:36:47
    Track 14, start time 52:00:15
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 24.
    The drive CDRW speeds are: 24.
    So, the CD is read in the drive, but it still never shows in the left panel to play or import. Windows Media Player will do it, but hey, I don't want to use WMP! I want to use iTunes! I have tried updating the Intel chipset drivers as well, no dice.
    Any help would sincerely be appreciated.

    Me too! I have just updated to version 7.0.2, and now iTunes won't recognize any Cd's I put in the drive to import. It hovers for a while at CDDB Gracenote and doesn't respond. Me thinks this is some sort of 7.0.2 gracenote issue. I've never had any issues with iTunes like this before. I am running bullguard version 6.1, microsoft defender, zone alarm, spyware doctor and spybot search and destroy and none of them have intered before. any suggestions?
    I think this is disgraceful that iTunes can put out a new version of iTunes with so many inherent bugs. i count my self lucky that it hasn't deleted my library. i'm off now to get an external drive and back the lot up, because i don't have any faith in itunes anymore. i have 13,000 songs, so i'd be a little ticked off!

  • I am trying to home share with my new MacBook. The music library I am wishing to share is not displaying anywhere on my new laptop under music or library. My computer is authorized and I have tried restarting itunes, etc. Any help/ideas?

    I am trying to home share with my new MacBook. The music library I am wishing to share is not displaying anywhere on my new laptop under music or library. My computer is authorized and I have tried restarting itunes, etc. Any help/ideas?

    Are you using the same ID for homesharing on all devices.
    By the way shared libraries don't show up under either 'Music' or 'Libraries'.

Maybe you are looking for