Any Help for a newbie
I just purchased a Lenovo Thinkpad 550 i7 Windows 7. Can anyone streer me to a thread that would discuss some issues I am having, one being when I send a video from my I phone and play it back it is horizontal and I can't seem to find how to rotate it. The only manual I have is the one built in and it is vauge. Help!
Apps stuck on waiting.
http://www.labnol.org/internet/download-apps-stuck-on-waiting/25793/
Similar Messages
-
Multiple Problems - Any help for a newbie?
Ok, I am totally new to embedding progressive video into
HTML. I am using Dreamweaver to insert a Flash Video. The file size
is just too large to insert a .swf directly.
Here is a link to the webpage. Everything is working but the
Flash.
http://www.smartsolutionsdesign.com/infocusftp/
1. When I use Dreamweaver to insert a progressive flash
video, the video transparency is not working. When the video ends,
I want the background image to display in its entirety. I see the
background image surrounding the video while it is playing but I
want to see the entire image once the video finishes. Note: I was
able to get the background image to display when I inserted the
.swf file (not using progressive download) directly into the page
and then set the wmode parameter to transparent.
2. I also do not want that skin to display. I think
Dreamweaver is putting it there. Thanks but no thanks!!!
3. Finally, I want the video to fill the entire space. I do
not know why it does not. I specified the height and width of the
video to be the same exact size of the table cell.
I know this is alot but I am really about to lose my mind and
would appreciate help!Open the Sharing pane of System Preferences and change the computer's name.
(30928) -
Is there any help for a cracked iphone after dropping it?
is there any help for a cracked iphone after dropping it?
If you have the new AppleCare+ service, then yes:
http://www.apple.com/support/products/iphone.html
Otherwise, maybe. Regular AppleCare, if you have it, can't help you. But you might still be able to get it repaired – of course, any repair will cost you. Apple will replace a damaged iPhone for a flat fee.
800-MY-APPLE (800-692-7753 -
I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this on the apple site
If the phone has been hacked, we can not offer advice on Apple's support site.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
Just bought Lightroom 6 through B&H Photo Video online and now Adobe says it is "unable to validate this serial number for Lightroom". Any help for me here folks?
If you want to buy the product Lightroom 6.0 from the Adobe Website, then please visit here-
http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html
And scroll down to the bottom and spot the Lightroom 6.0 to buy the standalone application.
You can buy the application as an upgrade or full product (second red box in the screen shot shows the previous version of the software you own and needed to be selected if you are buying the upgrade Lightroom 6.0 ) in case you have the previous version ( Lightroom 1.0, 2.0, 3.0, 4.0, 5.0 ) serial number registered or noted somewhere.
Here is the screenshot which might help you in buying the product correctly,
You can visualize the first red box where you need to select on the drop down to make the purchase as an upgrade product or the full version of the application.
If you have the qualifying product ( Lightroom 1.0, 2.0, 3.0, 4.0, 5.0 ), then it would cost you just $79 else $149 in case of full installer.
Try, it might help you get over the plight of buying the product.
Thank you so much. -
MBP was hacked? Help for a Newbie.
Hi everyone. I think my WEP was cracked and my MBP was hacked. WEP was cracked because the lock is gone. Tried to restart, sorry don't have access to router to restart that or confirm connections on that hardware. Connecting to MBP via airport. Have been in system preferences and attempted to re-connect with WEP passowrd. I've learned online that WEP2 is better, so lesson learned. If I post the netstat commands I ran would you be able to tell me if my system has been hacked? From my newbie knowledge of how to read netstat I thinkit was- There have been connections to open port numbers in the 5000 range from which I have read online is an alert. Also, I do not recognize the ip addresses or hostnames and also I see files were sent and received. I've run Mac Scan trial version - but from my knowledge this does not confirm connections to my computer from an ulocked airport connection. Additionally, all of a sudden I have theDS_Store on my system, is this an indicator of a hack. Sorry guys and gals for all the Q's.If this is the incorrect forum for the question could you kindly point me to where I would ask this. Thanks for any help. JO
Thanks people. I xed out some info I think is personal ip or isp - let me know if you needed this info. i called it my ip but maybe it is my isp - in any case, it starts with 192. Let me know also if i posted too much info.
netstat - It's alot of info. on the internet I see amazon web servers is Ec2 is this- and from what I read this is a way to transfer files.
Today I closed all browsers, and ran netstst -n and netstat.
as I noticed other times I ran and lookedup the ip address that they were browser tabs that I had opened (makes sense- it's reading what my computer is connected to).....
Thanks guys.and if i was hacked should I take computer to genius bar or police?
- JO
From today
netstat -n
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 2119 XXXXXXXXX2.54750 74.125.224.181.443 ESTABLISHED
tcp4 0 0 XXXXXXXXX2.54749 74.125.224.181.443 ESTABLISHED
tcp4 0 0 XXXXXXXXX2.54748 74.125.224.189.443 ESTABLISHED
tcp4 0 201 XXXXXXXXX2.54747 75.11XXXXXX.108.134.443 ESTABLISHED
tcp4 0 0 XXXXXXXXX2.54745 199.47.217.177.443 ESTABLISHED
tcp4 0 0 XXXXXXXXX2.54741 199.47.216.144.80 ESTABLISHED
tcp4 37 0 XXXXXXXXX6.54707 107.20.249.252.443 CLOSE_WAIT
tcp4 37 0 XXXXXXXXX6.54706 107.20.249.104.443 CLOSE_WAIT
tcp4 37 0 XXXXXXXXX6.54705 199.47.216.172.443 CLOSE_WAIT
tcp4 37 0 XXXXXXXXX6.54702 199.47.217.178.443 CLOSE_WAIT
tcp4 37 0 10.0.1.6.54521 199.47.216.173.443 CLOSE_WAIT
tcp4 0 0 127.0.0.1.26165 127.0.0.1.50379 ESTABLISHED
tcp4 0 0 127.0.0.1.50379 127.0.0.1.26165 ESTABLISHED
tcp4 37 0 10.0.1.6.49394 107.20.249.164.443 CLOSE_WAIT
tcp4 0 0 XXXXXXXXX2.54743 69.58.188.38.443 TIME_WAIT
tcp4 0 0 XXXXXXXXX2.54744 199.59.148.10.80 TIME_WAIT
tcp4 0 0 XXXXXXXXX2.54742 69.58.188.38.443 TIME_WAIT
tcp4 0 0 XXXXXXXXX2.54724 74.125.224.243.443 TIME_WAIT
udp4 0 0 *.* *.*
udp6 0 0 *.60916 *.*
udp4 0 0 *.60916 *.*
udp4 0 0 XXXXXXXXX2.123 *.*
udp6 0 0 *.53780 *.*
udp4 0 0 *.53780 *.*
udp6 0 0 *.62813 *.*
udp4 0 0 *.62813 *.*
udp6 0 0 *.63440 *.*
udp4 0 0 *.63440 *.*
udp6 0 0 *.56188 *.*
udp4 0 0 *.56188 *.*
udp6 0 0 *.55626 *.*
udp4 0 0 *.55626 *.*
udp6 0 0 *.56269 *.*
udp4 0 0 *.56269 *.*
udp6 0 0 fe80::e2f8:47ff:.123 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.17500 *.*
udp4 0 0 127.0.0.1.123 *.*
udp6 0 0 fe80::1%lo0.123 *.*
udp6 0 0 ::1.123 *.*
udp6 0 0 *.123 *.*
udp4 0 0 *.123 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp6 0 0 *.5353 *.*
udp4 0 0 *.5353 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
icm4 0 0 *.* *.*
icm6 0 0 *.* *.*
Active LOCAL (UNIX) domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
ffffff80119bc700 stream 0 0 0 ffffff80119baa80 0 0 /var/run/mDNSResponder
ffffff80119baa80 stream 0 0 0 ffffff80119bc700 0 0
ffffff80119ba900 stream 0 0 0 ffffff80119bba40 0 0
ffffff80119bba40 stream 0 0 0 ffffff80119ba900 0 0
ffffff800d9c52c0 stream 0 0 0 0 0 0
ffffff800d9c4600 stream 0 0 0 ffffff80119bad80 0 0 /var/run/mDNSResponder
ffffff80119bad80 stream 0 0 0 ffffff800d9c4600 0 0
ffffff800d9c5b00 stream 0 0 0 ffffff800c369d40 0 0 /var/run/mDNSResponder
ffffff800c369d40 stream 0 0 0 ffffff800d9c5b00 0 0
ffffff800c369c80 stream 0 0 0 0 0 0
ffffff80119bcf40 stream 0 0 0 ffffff80119bce80 0 0 /.dbfseventsd
ffffff80119bce80 stream 0 0 0 ffffff80119bcf40 0 0
ffffff800d9c4000 stream 0 0 ffffff800fcd81f0 0 0 0 /.dbfseventsd
ffffff800bda9540 stream 0 0 0 ffffff800d9c4fc0 0 0
ffffff800d9c4fc0 stream 0 0 0 ffffff800bda9540 0 0
ffffff800d9c4300 stream 0 0 0 ffffff800d9c4240 0 0 /tmp/launchd-95.uZCVf1/sock
ffffff800d9c4240 stream 0 0 0 ffffff800d9c4300 0 0
ffffff800d9c43c0 stream 0 0 0 ffffff800d9c4480 0 0
ffffff800d9c4480 stream 0 0 0 ffffff800d9c43c0 0 0
ffffff800d9c5140 stream 0 0 0 ffffff800d9c5080 0 0 /var/run/mDNSResponder
ffffff800d9c5080 stream 0 0 0 ffffff800d9c5140 0 0
ffffff800c36a100 stream 0 0 0 ffffff800bda9600 0 0 /var/run/mDNSResponder
ffffff800bda9600 stream 0 0 0 ffffff800c36a100 0 0
ffffff800c369bc0 stream 0 0 0 ffffff800bda9cc0 0 0 /var/tmp/launchd/sock
ffffff800bda9cc0 stream 0 0 0 ffffff800c369bc0 0 0
ffffff800c368840 stream 0 0 0 ffffff800d9c6940 0 0 /var/run/mDNSResponder
ffffff800d9c6940 stream 0 0 0 ffffff800c368840 0 0
ffffff800bdaa200 stream 0 0 0 ffffff800bdaa140 0 0 /var/run/mDNSResponder
ffffff800bdaa140 stream 0 0 0 ffffff800bdaa200 0 0
ffffff800d9c5e00 stream 0 0 0 ffffff800d9c5ec0 0 0 /var/run/usbmuxd
ffffff800d9c5ec0 stream 0 0 0 ffffff800d9c5e00 0 0
ffffff800d9c5f80 stream 0 0 0 ffffff800d9c6040 0 0 /var/run/mDNSResponder
ffffff800d9c6040 stream 0 0 0 ffffff800d9c5f80 0 0
ffffff800d9c6100 stream 0 0 0 ffffff800d9c61c0 0 0 /var/run/mDNSResponder
ffffff800d9c61c0 stream 0 0 0 ffffff800d9c6100 0 0
ffffff800d9c6280 stream 0 0 0 ffffff800d9c6340 0 0 /var/run/mDNSResponder
ffffff800d9c6340 stream 0 0 0 ffffff800d9c6280 0 0
ffffff800d9c6400 stream 0 0 0 ffffff800d9c64c0 0 0 /var/run/mDNSResponder
ffffff800d9c64c0 stream 0 0 0 ffffff800d9c6400 0 0
ffffff800c36ab80 stream 0 0 0 ffffff800bda9300 0 0 /var/run/mDNSResponder
ffffff800bda9300 stream 0 0 0 ffffff800c36ab80 0 0
ffffff800c36a1c0 stream 0 0 0 ffffff800c369140 0 0 /var/run/mDNSResponder
ffffff800c369140 stream 0 0 0 ffffff800c36a1c0 0 0
ffffff800d9c6700 stream 0 0 0 ffffff800d9c6880 0 0 /var/run/mDNSResponder
ffffff800d9c6880 stream 0 0 0 ffffff800d9c6700 0 0
ffffff800c368900 stream 0 0 ffffff800de9a550 0 0 0 /tmp/icssuis502
ffffff800c3692c0 stream 0 0 0 ffffff800c369ec0 0 0 /var/run/mDNSResponder
ffffff800c369ec0 stream 0 0 0 ffffff800c3692c0 0 0
ffffff800d9c6e80 stream 0 0 0 ffffff800d9c6d00 0 0 /var/run/usbmuxd
ffffff800d9c6d00 stream 0 0 0 ffffff800d9c6e80 0 0
ffffff800c3683c0 stream 0 0 0 ffffff800c368540 0 0 /var/run/mDNSResponder
ffffff800c368540 stream 0 0 0 ffffff800c3683c0 0 0
ffffff800bdaa080 stream 0 0 0 ffffff800bda9d80 0 0 /var/run/mDNSResponder
ffffff800bda9d80 stream 0 0 0 ffffff800bdaa080 0 0
ffffff800bda9480 stream 0 0 0 ffffff800bda9780 0 0 /var/run/mDNSResponder
ffffff800bda9780 stream 0 0 0 ffffff800bda9480 0 0
ffffff800bda9000 stream 0 0 0 ffffff800c36a580 0 0
ffffff800c36a580 stream 0 0 0 ffffff800bda9000 0 0
ffffff800c36a280 stream 0 0 0 ffffff800c36ad00 0 0
ffffff800c36ad00 stream 0 0 0 ffffff800c36a280 0 0
ffffff800c36aa00 stream 0 0 0 ffffff800c36a880 0 0
ffffff800c36a880 stream 0 0 0 ffffff800c36aa00 0 0
ffffff800c369b00 stream 0 0 0 ffffff800c369500 0 0
ffffff800c369500 stream 0 0 0 ffffff800c369b00 0 0
ffffff800c369f80 stream 0 0 ffffff800d57f1f0 0 0 0 /tmp/launch-Uw8Fqt/org.x:0
ffffff800c368cc0 stream 0 0 ffffff800d57f3e0 0 0 0 /tmp/launch-5PRrer/Listeners
ffffff800c369680 stream 0 0 ffffff800d57f5d0 0 0 0 /tmp/launch-JsZCof/Render
ffffff800c369080 stream 0 0 ffffff800d57fe88 0 0 0 /tmp/launchd-95.uZCVf1/sock
ffffff800c369800 stream 0 0 0 ffffff800c369380 0 0
ffffff800c369380 stream 0 0 0 ffffff800c369800 0 0
ffffff800c368d80 stream 0 0 0 ffffff800c369440 0 0
ffffff800c369440 stream 0 0 0 ffffff800c368d80 0 0
ffffff800c368fc0 stream 0 0 0 ffffff800c369740 0 0
ffffff800c369740 stream 0 0 0 ffffff800c368fc0 0 0
ffffff800c36aac0 stream 0 0 0 ffffff800bdaa2c0 0 0
ffffff800bdaa2c0 stream 0 0 0 ffffff800c36aac0 0 0
ffffff800bdaa680 stream 0 0 0 ffffff800bda9b40 0 0
ffffff800bda9b40 stream 0 0 0 ffffff800bdaa680 0 0
ffffff800bda99c0 stream 0 0 0 ffffff800bda9240 0 0 /var/run/mDNSResponder
ffffff800bda9240 stream 0 0 0 ffffff800bda99c0 0 0
ffffff800bda96c0 stream 0 0 0 ffffff800c36a4c0 0 0
ffffff800c36a4c0 stream 0 0 0 ffffff800bda96c0 0 0
ffffff800c368e40 stream 0 0 ffffff800c57fc98 0 0 0 /var/run/pppconfd
ffffff800c36a340 stream 0 0 0 ffffff800c36a400 0 0
ffffff800c36a400 stream 0 0 0 ffffff800c36a340 0 0
ffffff800c36a640 stream 0 0 0 ffffff800c36a700 0 0
ffffff800c36a700 stream 0 0 0 ffffff800c36a640 0 0
ffffff800c36adc0 stream 0 0 0 ffffff800c36ae80 0 0
ffffff800c36ae80 stream 0 0 0 ffffff800c36adc0 0 0
ffffff800bda90c0 stream 0 0 0 ffffff800bda9180 0 0
ffffff800bda9180 stream 0 0 0 ffffff800bda90c0 0 0
ffffff800bda9840 stream 0 0 0 ffffff800bda9900 0 0
ffffff800bda9900 stream 0 0 0 ffffff800bda9840 0 0
ffffff800bda9e40 stream 0 0 0 ffffff800bda9f00 0 0
ffffff800bda9f00 stream 0 0 0 ffffff800bda9e40 0 0
ffffff800bdaa800 stream 0 0 0 ffffff800bdaa740 0 0
ffffff800bdaa740 stream 0 0 0 ffffff800bdaa800 0 0
ffffff800bdaa8c0 stream 0 0 0 ffffff800bdaa980 0 0
ffffff800bdaa980 stream 0 0 0 ffffff800bdaa8c0 0 0
ffffff800bdaab00 stream 0 0 0 ffffff800bdaaa40 0 0 /var/tmp/launchd/sock
ffffff800bdaaa40 stream 0 0 0 ffffff800bdaab00 0 0
ffffff800bdaabc0 stream 0 0 0 ffffff800bdaac80 0 0
ffffff800bdaac80 stream 0 0 0 ffffff800bdaabc0 0 0
ffffff800bdaae00 stream 0 0 0 ffffff800bdaad40 0 0 /var/tmp/launchd/sock
ffffff800bdaad40 stream 0 0 0 ffffff800bdaae00 0 0
ffffff800bdaaf80 stream 0 0 0 ffffff800bdaaec0 0 0
ffffff800bdaaec0 stream 0 0 0 ffffff800bdaaf80 0 0
ffffff800bdab100 stream 0 0 0 ffffff800bdab040 0 0
ffffff800bdab040 stream 0 0 0 ffffff800bdab100 0 0
ffffff800bdab280 stream 0 0 0 ffffff800bdab1c0 0 0
ffffff800bdab1c0 stream 0 0 0 ffffff800bdab280 0 0
ffffff800bdab400 stream 0 0 0 ffffff800bdab340 0 0
ffffff800bdab340 stream 0 0 0 ffffff800bdab400 0 0
ffffff800bdab4c0 stream 0 0 0 ffffff800bdab580 0 0
ffffff800bdab580 stream 0 0 0 ffffff800bdab4c0 0 0
ffffff800bdab7c0 stream 0 0 ffffff800c110740 0 0 0 /var/tmp/launchd/sock
ffffff800bdab880 stream 0 0 ffffff800c110930 0 0 0 /private/var/run/cupsd
ffffff800bdab940 stream 0 0 ffffff800c110c18 0 0 0 /var/run/usbmuxd
ffffff800bdabac0 stream 0 0 ffffff800c110e08 0 0 0 /var/run/asl_input
ffffff800bdabb80 stream 0 0 ffffff800c110f00 0 0 0 /var/run/SCHelper
ffffff800bdabc40 stream 0 0 ffffff800c0f6000 0 0 0 /var/run/vpncontrol.sock
ffffff800bdabd00 stream 0 0 ffffff800c0f60f8 0 0 0 /private/var/run/printtool
ffffff800bdabdc0 stream 0 0 ffffff800c0f61f0 0 0 0 /var/run/portmap.socket
ffffff800bdabf40 stream 0 0 ffffff800c0f62e8 0 0 0 /var/run/mDNSResponder
ffffff800bdabe80 stream 0 0 ffffff800c0f63e0 0 0 0 /var/run/com.apple.ActivityMonitor.socket
ffffff80119bca00 dgram 0 0 0 ffffff80119bbd40 ffffff80119bbd40 0
ffffff80119bbd40 dgram 0 0 0 ffffff80119bca00 ffffff80119bca00 0
ffffff80119bb680 dgram 0 0 0 ffffff80119bc7c0 ffffff80119bc7c0 0
ffffff80119bc7c0 dgram 0 0 0 ffffff80119bb680 ffffff80119bb680 0
ffffff800d9c5980 dgram 0 0 0 ffffff800bda9fc0 ffffff800bda9fc0 0
ffffff800bda9fc0 dgram 0 0 0 ffffff800d9c5980 ffffff800d9c5980 0
ffffff800d9c6ac0 dgram 0 0 0 ffffff800d9c4cc0 ffffff800d9c4cc0 0
ffffff800d9c4cc0 dgram 0 0 0 ffffff800d9c6ac0 ffffff800d9c6ac0 0
ffffff800d9c4540 dgram 0 0 0 ffffff800d9c4f00 ffffff800d9c4f00 0
ffffff800d9c4f00 dgram 0 0 0 ffffff800d9c4540 ffffff800d9c4540 0
ffffff800d9c6580 dgram 0 0 0 ffffff800d9c6640 ffffff800d9c6640 0
ffffff800d9c6640 dgram 0 0 0 ffffff800d9c6580 ffffff800d9c6580 0
ffffff800c368180 dgram 0 0 0 ffffff800d9c6b80 ffffff800d9c6b80 0
ffffff800d9c6b80 dgram 0 0 0 ffffff800c368180 ffffff800c368180 0
ffffff800d9c6a00 dgram 0 0 0 ffffff800c368000 ffffff800c368000 0
ffffff800c368000 dgram 0 0 0 ffffff800d9c6a00 ffffff800d9c6a00 0
ffffff800c3686c0 dgram 0 0 0 ffffff800d9c6dc0 ffffff800d9c6dc0 0
ffffff800d9c6dc0 dgram 0 0 0 ffffff800c3686c0 ffffff800c3686c0 0
ffffff800c3689c0 dgram 0 0 0 ffffff800c368a80 ffffff800c368a80 0
ffffff800c368a80 dgram 0 0 0 ffffff800c3689c0 ffffff800c3689c0 0
ffffff800bda9c00 dgram 0 0 0 ffffff800bda9a80 ffffff800bda9a80 0
ffffff800bda9a80 dgram 0 0 0 ffffff800bda9c00 ffffff800bda9c00 0
ffffff800c3698c0 dgram 0 0 0 ffffff800c36a7c0 ffffff800c36a7c0 0
ffffff800c36a7c0 dgram 0 0 0 ffffff800c3698c0 ffffff800c3698c0 0
ffffff800c36af40 dgram 0 0 0 ffffff800c36a040 ffffff800c36a040 0
ffffff800c36a040 dgram 0 0 0 ffffff800c36af40 ffffff800c36af40 0
ffffff800bda93c0 dgram 0 0 0 ffffff800c36a940 ffffff800c36a940 0
ffffff800c36a940 dgram 0 0 0 ffffff800bda93c0 ffffff800bda93c0 0
ffffff800bdaa440 dgram 0 0 0 ffffff800bdaa500 ffffff800bdaa500 0
ffffff800bdaa500 dgram 0 0 0 ffffff800bdaa440 ffffff800bdaa440 0
ffffff800bdaba00 dgram 0 0 ffffff800c110d10 0 0 0 /var/run/syslog
from today
netstat
Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 2119 XXXXXXXXX.2.54746 lax02s01-in-f21..https ESTABLISHED
tcp4 0 762 XXXXXXXXX.2.54745 v-d-1b.sjc.dropb.https ESTABLISHED
tcp4 0 0 XXXXXXXXX.2.54741 sjc-not1.sjc.dro.http ESTABLISHED
tcp4 37 0 XXXXXXXXX.6.54707 ec2-107-20-249-2.https CLOSE_WAIT
tcp4 37 0 XXXXXXXXX.6.54706 ec2-107-20-249-1.https CLOSE_WAIT
tcp4 37 0 XXXXXXXXX.6.54705 v-client-1a.sjc..https CLOSE_WAIT
tcp4 37 0 XXXXXXXXX.6.54702 199.47.217.178.https CLOSE_WAIT
tcp4 37 0 10.0.1.6.54521 v-client-2a.sjc..https CLOSE_WAIT
tcp4 0 0 localhost.26165 localhost.50379 ESTABLISHED
tcp4 0 0 localhost.50379 localhost.26165 ESTABLISHED
tcp4 37 0 10.0.1.6.49394 ec2-107-20-249-1.https CLOSE_WAIT
tcp4 0 0 XXXXXXXXX.2.54743 69.58.188.38.https TIME_WAIT
tcp4 0 0 XXXXXXXXX.2.54725 lax04s08-in-f19..https TIME_WAIT
tcp4 0 0 XXXXXXXXX.2.54744 r-199-59-148-10..http TIME_WAIT
tcp4 0 0 XXXXXXXXX.2.54742 69.58.188.38.https TIME_WAIT
tcp4 0 0 XXXXXXXXX.2.54724 lax04s08-in-f19..https TIME_WAIT
udp4 0 0 XXXXXXXXX.2.ntp *.*
udp6 0 0 *.53780 *.*
udp4 0 0 *.53780 *.*
udp6 0 0 *.62813 *.*
udp4 0 0 *.62813 *.*
udp6 0 0 *.63440 *.*
udp4 0 0 *.63440 *.*
udp6 0 0 *.56188 *.*
udp4 0 0 *.56188 *.*
udp6 0 0 *.55626 *.*
udp4 0 0 *.55626 *.*
udp6 0 0 *.56269 *.*
udp4 0 0 *.56269 *.*
udp6 0 0 sp.ntp *.*
udp4 0 0 *.* *.*
udp4 0 0 *.17500 *.*
udp4 0 0 localhost.ntp *.*
udp6 0 0 localhost.ntp *.*
udp6 0 0 localhost.ntp *.*
udp6 0 0 *.ntp *.*
udp4 0 0 *.ntp *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp6 0 0 *.mdns *.*
udp4 0 0 *.mdns *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
icm4 0 0 *.* *.*
icm6 0 0 *.* *.*
Active LOCAL (UNIX) domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
ffffff80119bba40 stream 0 0 0 ffffff80119ba900 0 0
ffffff80119ba900 stream 0 0 0 ffffff80119bba40 0 0
ffffff800d9c4180 stream 0 0 0 ffffff800c369a40 0 0 /var/tmp/launchd/sock
ffffff800c369a40 stream 0 0 0 ffffff800d9c4180 0 0
ffffff800c369200 stream 0 0 0 ffffff800d9c40c0 0 0
ffffff800d9c40c0 stream 0 0 0 ffffff800c369200 0 0
ffffff800c369980 stream 0 0 0 ffffff800d9c52c0 0 0 /private/var/run/cupsd
ffffff800d9c52c0 stream 0 0 0 ffffff800c369980 0 0
ffffff80119bc700 stream 0 0 0 ffffff80119baa80 0 0 /var/run/mDNSResponder
ffffff80119baa80 stream 0 0 0 ffffff80119bc700 0 0
ffffff800d9c4600 stream 0 0 0 ffffff80119bad80 0 0 /var/run/mDNSResponder
ffffff80119bad80 stream 0 0 0 ffffff800d9c4600 0 0
ffffff800d9c5b00 stream 0 0 0 ffffff800c369d40 0 0 /var/run/mDNSResponder
ffffff800c369d40 stream 0 0 0 ffffff800d9c5b00 0 0
ffffff800c369c80 stream 0 0 0 0 0 0
ffffff80119bcf40 stream 0 0 0 ffffff80119bce80 0 0 /.dbfseventsd
ffffff80119bce80 stream 0 0 0 ffffff80119bcf40 0 0
ffffff800d9c4000 stream 0 0 ffffff800fcd81f0 0 0 0 /.dbfseventsd
ffffff800bda9540 stream 0 0 0 ffffff800d9c4fc0 0 0
ffffff800d9c4fc0 stream 0 0 0 ffffff800bda9540 0 0
ffffff800d9c4300 stream 0 0 0 ffffff800d9c4240 0 0 /tmp/launchd-95.uZCVf1/sock
ffffff800d9c4240 stream 0 0 0 ffffff800d9c4300 0 0
ffffff800d9c43c0 stream 0 0 0 ffffff800d9c4480 0 0
ffffff800d9c4480 stream 0 0 0 ffffff800d9c43c0 0 0
ffffff800d9c5140 stream 0 0 0 ffffff800d9c5080 0 0 /var/run/mDNSResponder
ffffff800d9c5080 stream 0 0 0 ffffff800d9c5140 0 0
ffffff800c36a100 stream 0 0 0 ffffff800bda9600 0 0 /var/run/mDNSResponder
ffffff800bda9600 stream 0 0 0 ffffff800c36a100 0 0
ffffff800c369bc0 stream 0 0 0 ffffff800bda9cc0 0 0 /var/tmp/launchd/sock
ffffff800bda9cc0 stream 0 0 0 ffffff800c369bc0 0 0
ffffff800c368840 stream 0 0 0 ffffff800d9c6940 0 0 /var/run/mDNSResponder
ffffff800d9c6940 stream 0 0 0 ffffff800c368840 0 0
ffffff800bdaa200 stream 0 0 0 ffffff800bdaa140 0 0 /var/run/mDNSResponder
ffffff800bdaa140 stream 0 0 0 ffffff800bdaa200 0 0
ffffff800d9c5e00 stream 0 0 0 ffffff800d9c5ec0 0 0 /var/run/usbmuxd -
LCD/HDTV help for a newbie
I am a longtime BB customer and am finally taking the HDTV plunge. I have narrowed it down a bit to the Insignia NS-L37Q (32" is too small, 40" is too big) versus a Dynex DX-37L150A11. I am not a cinephile so the basic features are fine with me and the price is right (I am a cheapskate). It is a 37", 1080p LCD HDTV. This is for basic TV, sports, DVD viewing. Please indulge a few newbie questions.
1) The one small reservation I have is the Insignia's native contrast ratio at 1400:1 and brightness 500/cd/m2. Should I be concerned that it isn't high enough? I note the Dynex 37" in the same price range is 4000:1 but 450/cd/m2.
2) I have DISH satellite but may switch to DirectTV but assume both are similar. I assume I'll need a special HDTV box from them, correct? And HDMI cable to connect from box to set?
3) I have never bought a service plan in my life but am considering one for this. The Insignia already comes with a 2 year warrenty and this extends it to 4 as I understand it. Is $89 on a $549 LCD worth it? I'll be ticked if a pixel goes out in the middle of the screen, but does "burn in" still even happen on these units?
4) I run the DVD player through my stereo currently (because I am too cheap to buy home theatre sound) so would I just hook that up the same way through the audio inputs? I understand it won't be digital or anything.
5) It has 3:2 inverse pulldown. Is that good and why should I care?
Any help from the experts here is greatly appreciated.
Solved!
Go to Solution.I would recommend the Insignia, as both are Best Buy house brands but I've noticed better image quality and reliability with the Insignia's as opposed to the Dynex tv's.
1) While the Dynex has the better contrast ratio, the difference between 1400:1 and 4000:1 is not very staggering. Disregard this comparison.
2) Yes you will need a set-top-box from DirecTV, fortunately you can pick these boxes up at the store and can subscribe to your DirecTV account while you shop.
3) $89 for 2 years of peace of mind on an LCD tv is worth it, though I don't think it extends the contract to 4 years, rather, the service plan covers "normal wear and tear/heating issues/power surges", whereas the standard 2 year warranty only covers manufacturer's defective parts and labor. $89 is fair, cheapskate or not.
4) Your DVD player setup will work fine, but consider getting a blu ray for next Christmas, you'll thank me later.
5) Don't worry about this.
I don't claim to be an expert, but I am an enthusiast, so any "experts" out there feel free to chime in and correct me if I may be wrong.
If you like posts that I make, be sure to click on the star underneath my name. Thanks! -
When syncing my iPhone with my iPhone, I get a message that 2 items did not sync - use iTunes for help.
But I can't find any help information in iTunes at all, let alone when items are not syncing.
How do I figure out what is not syncing?Since it seems App related, I'm not sure what to offer you. I guess the only suggestion I have is for you to reboot your iPad and then try again. To reboot, hold the power and home buttons at the same time for at least 10 seconds (keep holding past the swipe to shut down bar if it appears) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any settings or data, so it's worth a shot.
-
Need help for a newbie problem
I am VERY new to all this Java programming but have really started to enjoy it.
I have two problems with my program that I can not find answers to.
1. I am looking to find out why my code will not select the right answers when I select the first choice in the array. The answer that is delivered turns out to be the 3rd selection. The second and third selection work great, but the first selection always turns out with the thrid answer.
2. I know I need to do better error checking on the user input. At this point I am only checking for correct integer input, but I dont know how to fix or avoid the error for when the user would mistakedly enter letters instead of numbers.
Any hints?
Code to follow... I hope...
No gui allowed for this program.
First time posting so I hope this works and I do it the right way...
import java.text.DecimalFormat; //To round to 2 decimal places for payment format.
import java.io.*; //Allows User to input.
public class Wk5JimP
//classes for keyboard inputs from user
public static InputStreamReader reader = new InputStreamReader (System.in);
public static BufferedReader keyboard = new BufferedReader (reader);
//main
public static void main (String[] args) throws IOException
//Variables
DecimalFormat decimal = new DecimalFormat("#,##0.00"); //Makes the decimal format for the output
int appAmount = 200000; //approved loan amount
short rPay = 0; //repayment option
int ps; //payment schedule switching variable.
//Year array and variables
int yTerm[] = {30, 15, 7,}; //Term of the loan in years array
short rOller2 = 0; //looping variable for rolling the years
short rOller3 = 0; //looping variable for rolling the years
//Month array and variables
int mTerm[] = {360, 180, 84,}; //Term of the loan in months array
short rOller = 0; //looping variable for rolling the months
short rOller1 = 0; //looping variable for rolling the months
//Interest rate array and variables
double iRate[] = {5.75, 5.50, 5.35,}; //interest rate array
int liRate = 0; //looping variable for interest rate
int liRate1 = 0; //looping variable for interest rate
// Payment array and variables
double mPayment[] = {
((appAmount*(iRate[0]/12/100))/(1-1/Math.pow((1+iRate[0]/12/100), mTerm[0]))),
((appAmount*(iRate[1]/12/100))/(1-1/Math.pow((1+iRate[1]/12/100), mTerm[1]))),
((appAmount*(iRate[2]/12/100))/(1-1/Math.pow((1+iRate[2]/12/100), mTerm[2])))
}; //monthly payment array
int lPay = 0; //looping variable for payment incrementation
int lPay1 = 0; //looping variable for payment incrementation
//Dollar amounts into decimal format of two places
String fappAmount = decimal.format(appAmount);
//Output to screen for header information
System.out.println();
System.out.println("Congratulations!");
System.out.println("You are approved for a $" + fappAmount + " loan");
System.out.println("The three repayment options are listed below.\n");
System.out.println("-------------------------------------------------------------------------");
System.out.println(" Repayment\t Loan\t\t Term\t\t Interest\t Monthly");
System.out.println(" Option\tAmount\t Years Months\t Rate \t Payment");
System.out.println("-------------------------------------------------------------------------");
//Begin repayment option loop for calculation
while (rOller != 3)
// if else loop to second and third repayment options
if (rOller1 <= 2)
// for statement loops last repayment option
for (rPay = 1; rPay <=3; rPay++)
{mPayment[lPay] = mPayment[lPay1++];
yTerm[rOller2] = yTerm[rOller3++];
mTerm[rOller] = mTerm[rOller1++];
iRate[liRate] = iRate[liRate1++];
//Output to screen for numerical repayment option info
System.out.println(" " + rPay + "\t $" + fappAmount + "\t\t " + yTerm[rOller2] + "\t" + mTerm[rOller] + "\t " + decimal.format(iRate[liRate]) + "% \t$" + decimal.format(mPayment[lPay])+ "\n\n");
else
//begin payment option selection
System.out.println();
System.out.println("Which one of the payment schedules would you like to see?\n");
System.out.println("Please enter 1 or 2 or 3 to see the payment schedule\nor enter any other number to exit.");
ps = Integer.parseInt(keyboard.readLine());
switch (ps)
case 1:
System.out.println("\nOption #1\n");
paysched(yTerm[0], appAmount, iRate[0], mPayment[0]);
break;
case 2:
System.out.println("\nOption #2\n\n");
paysched(yTerm[1], appAmount, iRate[1], mPayment[1]);
break;
case 3:
System.out.println("\nOption #3\n\n");
paysched(yTerm[2], appAmount, iRate[2], mPayment[2]);
break;
default:
System.out.println("Thank you!\n\n");
System.exit(0);
}//end switch
}//end while
}//end main
//payment schedule method
public static void paysched(int yTerm, int appAmount, double iRate, double mPayment) throws IOException
//Declare variables for looped calculations
DecimalFormat decimal = new DecimalFormat("#,##0.00"); //Makes the decimal format for the output
double balance = appAmount;
double monIRate = iRate / 12;
double iPay = 0;
double pPay = 0;
short pNum = 1;
short year = 1;
//Header Output to screen for payment schedule
System.out.println("-------------------------------------------------------------------------");
System.out.println(" Payment \t Principle\tInterest\tTotal \t\tBalance");
System.out.println(" Year Month\t Payment\tPayment \tPayment \tRemaining");
System.out.println("-------------------------------------------------------------------------");
//Loop for shceduled payment calculation for all but the final year
do
//Apply the payment
iPay = balance * (monIRate /100);
pPay = mPayment - iPay;
balance = balance - pPay;
//Output to screen for payment information
System.out.println(" " +year+ " \t " +pNum+ " \t $" +(decimal.format(pPay))+ "\t$" +(decimal.format(iPay))+ "\t $" +(decimal.format(mPayment))+ "\t $" +(decimal.format(balance)));
pNum++;
if (pNum % 13 == 0)
System.out.println("Press enter to see the next year payments.");
System.in.read();
System.in.read();
year++;
pNum = 1;
//Output to screen for payment schedule
System.out.println("-------------------------------------------------------------------------");
System.out.println(" Payment \t Principle\tInterest\tTotal \t\tBalance");
System.out.println(" Year Month\t Payment\tPayment \tPayment \tRemaining");
System.out.println("-------------------------------------------------------------------------");
} //end if
} //end do
while(year < yTerm);
//Final Year calculations
do
//Apply the payment
iPay = balance * (monIRate /100);
pPay = mPayment - iPay;
balance = balance - pPay;
//Output to screen for payment information
System.out.println(" " +year+ " \t " +pNum+ " \t $" +(decimal.format(pPay))+ "\t$" +(decimal.format(iPay))+ "\t $" +(decimal.format(mPayment))+ "\t $" +(decimal.format(balance)));
pNum++;
if (pNum % 13 == 0)
System.out.println("Please press enter to select and view another payment schedule.");
System.in.read();
System.in.read();
year++;
} //end if
}//end do
while(year < (yTerm+1));
}//end class
}//end classThis is my first post so please be gentle...
Thanks for any help!When you choose Java to solve the problems, you need to adapt to the power/strategies/methodology that java offers you, and thats the way for solving problems in Java.
Why would you put the entire implementation for calculation inside main method? You could break down the program into smaller methods which could do the calculation bit and then call them in main method.
Anyways the reason that it is calculating for term of 7 years is that
// for statement loops last repayment option
for (rPay = 1; rPay <=3; rPay++)
{mPayment[lPay] = mPayment[lPay1++];
yTerm[rOller2] = yTerm[rOller3++];You are changing the value of the array yTerm[ ]. Hence once the control is out of the for loop the value of y[0]=7,y[1]=7 and y[2]=7.
Solution 1: mark yTerm as final.
Solution 2: set yTerm[0], yTerm[1] back as 30,15 after the for loop.
if (rOller1 <= 2)
// for statement loops last repayment option
for (rPay = 1; rPay <=3; rPay++)
{mPayment[lPay] = mPayment[lPay1++];
yTerm[rOller2] = yTerm[rOller3++];
mTerm[rOller] = mTerm[rOller1++];
iRate[liRate] = iRate[liRate1++];
//Output to screen for numerical repayment option info
System.out.println(" " + rPay + "\t $" + fappAmount + "\t\t " + yTerm[rOller2] + "\t" + mTerm[rOller] + "\t " + decimal.format(iRate[liRate]) + "% \t$" + decimal.format(mPayment[lPay])+ "\n\n");
yTerm [0]=30;
yTerm [1]=15;
}Futher the issue is with monthly calculation of pay back amount in switch - case statement.
As you have not provided what the problem is and what is the criteria for calculation of monthly interest or reducing the amount etc. Its not possible (at least for me) to tell you why it would run to negative. Mathematically that is the only thing possible,
Step 1: make those changes in your code. Make changes required to claculate the balance.
Step 2: Execute the new code and
Step 3: Gimme the dukes.
Cheers
$ -
Editing Help for a newbie.....Please be gentle..
I am new to Photoshop CS3, in fact, new to photoshop entirely. I have been using MS Digital Image Pro and up until now it has worked for me.
Here is my problem. I take a lot of pictures of coins. Sometimes I have to tilt the coin slightly to get a good rendition of the color. So at time the image is slightly oval.
I can not figure out how to use a tool to outline the coin, cut it (or copy) and paste to another project. The part that I can't figure out is adjusting the circle marquee tool to the perimeter of the coin.
Thank you for any help.OK, then...so my suggestion about scanning the coins is so worthless to you that it's not even worth commenting about?
If so, so be it. I don't necessarily live and die by having my suggestions validated. Acknowledgment is kind of nice to see, though.
If you insist on your current workflow, maybe you'd like to know this little trick:
As you click-and-drag out an elliptical marquee, you're going to try to be pretty close to properly surrounding your coin, right? Well, before you let up on your mouse button to commit to the elliptical "marching ants" selection area, press and hold your space bar. This will allow you to drag your current marquee around the document window. Move it so it's closer to accurately surrounding your coin, then let up on the space barKEEPING YOUR MOUSE BUTTON DEPRESSEDand you can continue to resize the marquee. If you get close, but not exact (maybe your hand gets tired; I know mine does occasionally when doing this), go ahead and commit to the selection. Then you can use the Transform Selection function to fine tune it.
Now, having said that, and knowing that you've remarked that you'll be doing a lot of this type of photography, it would seem to me that your efforts would be better served by figuring out a way to properly shoot the coins so that the circular distortion you have to correct for is eliminated. Since you say the reason you have to tilt the coins is to get a better capture of the color, my guess is that you need to focus your efforts on a better lighting scheme. Get the light correct, and you'll be able to shoot the coins straight-on, eliminating the circular distortion, and a whole lot of repetitive, finicky work in Photoshop.
Invest the time, effort and experimentation up front, for dividends that will pay off later with every coin image you do. -
More help for a newbie please!
hi everyone
ive got a list selection listener set up for my view class
this list shows names retrieved, this has been done by the following
for (int i=0;i < data.size(); i++)
Person aPerson = (Person)data.get(i);
// Compose a string for each object.
String personNameString = aPerson.getSurname() + ", " + aPerson.getName();
// Put string into array.
listArray=personNameString;
listModel.addElement(listArray[i]);�
what im stuck on how to do is to select a name from the list and have other data like
getLicenceNo() or getDateOfBirth() to be shown on jtextfields
any help would be appreciated... the closest i can get is to have something like this in the listActionListenerameList.addListSelectionListener(new ListSelectionListener()
public void valueChanged(ListSelectionEvent event)
String d1String = aPerson.getName();
String d2String = aPerson.getSurname();
String d3String = aPerson.getLicenceNo();
Object selectedValue = nameList.getSelectedValue();
licenceField.setText(selectedValue.toString());
validate();
but all i get is the terminal window coming up with lots of error messages under NullPointerExceptionthis is the error that comes up under terminal window upon clicking a name in jlist
java.lang.NullPointerException
at View$3.valueChanged(View.java:102)
at javax.swing.JList.fireSelectionValueChanged(JList.java:1321)
at javax.swing.JList$ListSelectionHandler.valueChanged(JList.java:1335)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:187)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:214)
at javax.swing.DefaultListSelectionModel.changeSelection(DefaultListSelectionModel.java:402)
at javax.swing.DefaultListSelectionModel.changeSelection(DefaultListSelectionModel.java:411)
at javax.swing.DefaultListSelectionModel.setSelectionInterval(DefaultListSelectionModel.java:435)
at javax.swing.JList.setSelectionInterval(JList.java:1608)
at javax.swing.plaf.basic.BasicListUI$MouseInputHandler.adjustFocusAndSelection(BasicListUI.java:1333)
at javax.swing.plaf.basic.BasicListUI$MouseInputHandler.mousePressed(BasicListUI.java:1295)
at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:222)
at java.awt.Component.processMouseEvent(Component.java:5097)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3195)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
java.lang.NullPointerException
at View$3.valueChanged(View.java:102)
at javax.swing.JList.fireSelectionValueChanged(JList.java:1321)
at javax.swing.JList$ListSelectionHandler.valueChanged(JList.java:1335)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:187)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:157)
at javax.swing.DefaultListSelectionModel.setValueIsAdjusting(DefaultListSelectionModel.java:554)
at javax.swing.JList.setValueIsAdjusting(JList.java:1675)
at javax.swing.plaf.basic.BasicListUI$MouseInputHandler.mouseReleased(BasicListUI.java:1371)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:232)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) -
I am new to the Mac world and could use some help. I am attempting to upload a video I shoot using the built in camera on iMovie to Vimeo. I cannot get the audio to sync with the video on Vimeo. I know there are specific settings I should have...but...as a newbie to Mac, I have no idea where to go to make those changes to try to get this to work properly.
Any help on how to change the settings of my video and get the problem fixed?I would try to separate the audio from the clip then sync it. I have never had you problem though.
-
Any help for my problem with iTunes 11.2.1 update and "unknown error (-54)"
After downloading iTunes 11.2.1 update I can't get into iTunes Store and keep getting an error message "unknown error (-54)". What does this mean? How do I correct it? No sense in having iTunes if I can't get into the store or my account.
Thank you for any help.Why is this Itunes such a pile of junk? If I restart my computer I can sometimes find the recently added music in my Itunes Library.
It would be nice to know if other people are having the same problems. -
Flash Player 17 Any help for Yahoo games?
I have Flash Player 17
It is the newest version. I checked other Yahoo games and they work fine on my Win7 OS. However, on Omaha Poker, a straight beats a flush, 3 of a kind beats a straight, and a flush beats a full house! I've even had a King beat 2 pair. The funny part is, one day the flush wins, the next day the straight beats the flush!
I do, not have this problem with Texas Hold,'me poker. I checked my plug-ins, and only 1 Adobe FP is running (I know Google Chrome had problems with this, but not on my PC)
What else could cause this to happen? I usually have only 1 or 2 devices running,and no more than 1 browser window open on each, I have the same problem with just 1 device on. I have a couple add-ons running, but their speed is less than 1/2 second total. Any help?
TY
JackieI uninstalled by using Uninstall programs. Yes, activex for IE. By fails, I was using it to listen to wgnam.com (radio station). After installing V17 yesterday, & restarted the radio station this morning, the radio station wouldn't work, thus flash failed. After posting, I went back & installed V17 a couple more times & all of a sudden it started working!
-
Help for a newbie on Numbers!
Does anyone know of some really good sources for learning Numbers? Websites, book, tutorials, forums, etc... I would really like to learn more about how to write functions, formulas, and more. Any help or recommendations would be fantastic. Thanks in advanced!
Sircoffee wrote:
I have already downloaded those files, is there nothing else out there. I can find stuff on excel all day long, why not Numbers?
Excel has been around a long time. The user base for Excel is orders of magnitudes larger than for Numbers. Many books have been written for Excel.
There are more similarities in the two applications than there are differences. Often when I'm trying to figure out a solution, I end up finding an article/blog/post on the web about Excel, not Numbers, but most times it applies to either. The interfaces are very different but that stuff is covered in the Numbers User's Guide. Feel free to ask questions here if you can't figure something out.
Maybe something at this link might help:
https://www.apple.com/iwork/resources/
Here is a book on iWork:
http://www.peachpit.com/store/product.aspx?isbn=9780321618511
and more info on that book:
http://my.safaribooksonline.com:80/9780321637949
I have not seen the book so I cannot give any recommendations one way or the other.
Maybe you are looking for
-
I recently wiped my main drive using zero-data process. It seems to be "okay" when verifying its integrity. It is also "verified" according to S.M.A.R.T. 10.6 from Apple's Installation Disc will not install. It makes 20 estimated minutes remaining
-
Xcelsius and Reporting Services issue
Hi, I'm having problems with the integration of xcelsius and Reporting Services. i need to install in the server the XRS (xcelsius Reporting Services) correct? I also need to change the Web.config to tell the XRS the location of the reports? After th
-
Hi all, Can anyone tell me if they're having problems with Facebook Video Calling with Mac? Everytime I use it, I get the following pop up. I click allow, and the call connects. My own image just freezes onto the window and I can hear the other perso
-
Dear Sir, In our Production System , MIRO trabsaction is running very slow . Kindly guide us as what steps need to be followed to trace/analyze the reason for slow MIRO transaction . As the reason of the problem can be that some of the SQL might be r
-
Can't Find Slideshows within Time Machine iPhoto Backup
I have spent quite a lot of time setting up a slideshow with Ken Burns effects and added music. Large slideshow with 367 photos, went to send it to iDVD and it doesn't work...can't export it as it seems it's too large but that is another story (I thi