Any helpful materials or sample on how to get data from lotus in SAP?

I have some experience on get data from Biztalk (Microsoft Middleware). In that case, i could using "call FMxxxx DESTINATION rfc". the destination with type TCP/IP is created via SM59.
      and how about lotus ?
   ths

I have some experience on get data from Biztalk (Microsoft Middleware). In that case, i could using "call FMxxxx DESTINATION rfc". the destination with type TCP/IP is created via SM59.
      and how about lotus ?
   ths

Similar Messages

  • How to get data from Oracle to SAP

    Hi All,
           I want to get data from Oracle to my internal table in SAP,
    I worked on puting  the data from SAP to Oracle, it's working fine...
    Can anybody suggest the code for accessing from Oracle with 4 primary keys in oracle.
    regards
    manish

    hi
    good
    there is two things in sap open sql and native .if you ll use the open sql than you can access any database.
    thanks
    mrutyun

  • How to upload data from excel to SAP and options to be used

    How to upload data from excel to SAP and options to be used
    thank you,
    Regards,
    Jagrut Bharatkumar shukla

    Hi Jagrut,
        You can use gui_upload.
    chk the sample program mentioned below.
    REPORT ZFTP .
    DATA: BEGIN OF I_FILE OCCURS 0,
    DATA(2000) TYPE C,
    END OF I_FILE.
    DATA: BEGIN OF I_FILE2 OCCURS 0,
    DATA(2000) TYPE C,
    END OF I_FILE2.
    DATA: W_COUNT TYPE I.
    PARAMETERS: P_FILEN TYPE STRING,
    P_FILE2 TYPE STRING,
    P_NUM(4) TYPE N..
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
    PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
    PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
    START-OF-SELECTION.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = P_FILEN
    FILETYPE = 'ASC'
    HAS_FIELD_SEPARATOR = 'X'
    HEADER_LENGTH = 0
    READ_BY_LINE = 'X'
    DAT_MODE = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    CHECK_BOM = ' '
    VIRUS_SCAN_PROFILE =
    NO_AUTH_CHECK = ' '
    IMPORTING
    FILELENGTH =
    HEADER =
    tables
    data_tab = I_FILE
    IF SY-SUBRC <> 0.
    MESSAGE E024(Z1).
    ENDIF.
    LOOP AT I_FILE.
    W_COUNT = W_COUNT + 1.
    IF NOT W_COUNT > P_NUM.
    MOVE I_FILE TO I_FILE2.
    APPEND I_FILE2.
    ENDIF.
    ENDLOOP.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE =
    filename = P_FILE2
    FILETYPE = 'ASC'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = 'X'
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    WK1_N_FORMAT = ' '
    WK1_N_SIZE = ' '
    WK1_T_FORMAT = ' '
    WK1_T_SIZE = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = I_FILE2
    FIELDNAMES =
    *& Form F_FILE_GET
    text
    -->P_P_FILEN text
    -->P_TEXT_G01 text
    FORM F_FILE_GET USING L_FILENA L_TEXT.
    CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
    DEF_FILENAME = ' '
    DEF_PATH = ' '
    MASK = ',.,*.TXT.'
    MODE = 'O'
    TITLE = L_TEXT
    IMPORTING
    FILENAME = L_FILENA
    rc =
    EXCEPTIONS
    INV_WINSYS = 1
    NO_BATCH = 2
    SELECTION_CANCEL = 3
    SELECTION_ERROR = 4
    OTHERS = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Reward if helpful.
    Regards,
    Harini.S

  • How to get data from three tables (A,B,C) having one to many relation between A and B .and having one to many reation between b and c

    i have  three tables A,B,C.  there is one to many relation between A and B. and one to many relation existed between table b and c . how will get data from these three tables

    check if this helps:
    select * --you can always frame your column set
    from tableA a
    left join tableB b on a.aid=b.aid
    left join tableC c on c.bid=b.bid
    This is just a general query. However, we can help you a lot more, if you can post the DDL + sample data and required output.
    Thanks,
    Jay
    <If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

  • How to get data from a USB-UIRT device using Labview?

    How to get data from a USB-UIRT device using Labview?
    I'm trying to get data from a USB-UIRT device, is it posible with Labview?
    I really appreciate your help, 
    thanks

    You may want to contact the developer of the device for the API and DLL.
    http://65.36.202.170/phpBB2/viewforum.php?f=3

  • How to get data from subsites list of SharePoint 2010 in ssrs

    Hi,
    Can someone help me on this issue.
    I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
    First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
    after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
    for example, their is a top level site "abc"
    it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
    is created on particular date. 
    in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column  "Created By" of that sub site list "Sample List".
    I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
    I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
    I appreciate your help.
    Thank you,
    Kishore 

    Hi Kishore,
    SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
    Create a new report
    Create a Data Source in the report with the connection string like this:
    http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
    connection string later)
    Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
    Design the report(e.g. Add controls to the report)
    Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
    Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
    In the main report, pass the sub site name to the report we created above via the parameter created in step5
    That is all.
    Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
    http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
    For more information about Expression-Based connection string, please see:
    http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
    If there is anything unclear, please feel free to ask.
    Thanks,
    Jinchun Chen
    Jin Chen - MSFT

  • How to get data from Oracle using Native SQL in SAP.. Problem with date

    Hi Masters.
    I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
    I wrote this code and it works fine without the statement of where date > '01-09-2010'
    But i need that statement on the select. I read a lot about this issue, but no answer.
    My code is (this code is in SAP ECC 6.0)
    DATA: BEGIN OF datos OCCURS 0,
          id_numeric(10),
          component_name(40),
          comuna(10),
          record_id(10),
          status,
          sampled_date(10),
          END OF datos.
    DATA: c TYPE cursor.
    EXEC SQL.
      connect to 'LIM' as 'MYDB'
    ENDEXEC.
    EXEC SQL.
      SET CONNECTION 'MYDB'
    ENDEXEC.
    EXEC SQL PERFORMING loop_output.
      SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
      into :datos from lims.SAMP_TEST_RESULT
      where     date > '01-09-2010'
    ENDEXEC.
    EXEC SQL.
      disconnect 'MYDB'
    ENDEXEC.
    How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
    Any help
    Regards

    Please refer the example in this link which deals with Oracle date format.
    You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
    Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804]

  • How to push data from BW into SAP R/3 system???

    Hello,
    We have faced a problem. We need to push compressed sales data from BW to SAP R/3 system. But We don't know how to do it.
    Does it exist the standard instruments for it (without ABAP development)?
    How to integrate BW and SAP system?
    We will be much obliged you for your recomendations and advices.

    Hi Igor,
    I'm not aware of any standard out of the box mechanisms for moving Sales data back into SAP ERP. There are some delivered "retractors" for business scenarios like financial planning and consolidations where updated data is sent back to SAP ERP in a closed loop scenario. These retractors have been written in ABAP.
    I would suggest that you search the latest BI content to see if there is anything for sales data retraction. There might also be information in SAP note on how to do this in code.
    To send data from BI, you can also use the 'open hub' feature to extract the BI data to a DB table or file for example. This could then be read by a program to load SAP ERP. The loading would have to be custom development.
    Sorry I can't help you more - I fear you will most definitely have some custom development in this case.
    Cheers,
    Mike.

  • How to GET data from external secure website?

    We are trying to get data from a secure website. It is something like I try to get my bank statement online, where I have a user id and password to the secure website and try to get the data from XI.
    Does anybody have any idea how we could do it? What adapter should be used.
    I would really appreciate your help and award points.
    Thank,
    Arjun.

    Hi,
    Depends on how u are connecting to the website and getting the data.
    But you can do this using HTTP/Java Proxies. You can use HTTP if you are connecting via a URL. thats the most standard procedure.
    Regards
    vijaya

  • How to get data from hard drive in dead iMac?

    I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

    Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
    Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

  • How to get data from a table in a condition between twomonth

    hai friends
    I have a query that is i want to get data from a table based on a condition between two months in a format of char column
    Ex
    I have a column called from_month in the format of 'mon/yyyy'(already converted from date')
    then the second column is to_month in the same format 'mon/yyyy'
    now i wiil select from_month and to_month like
    from month jan/2009
    to month mar/2010
    how to use between of two months in the format of char.Please tell me how to get two different month between data.

    Hi,
    This may be of help.
    Remember Pointless has made a point ;) (worth millions)
    If possible , DO NOT store dates as strings or numbers.Let dates be dates.
    WITH dat AS
    (SELECT ' THIS IS JAN' x,to_char(to_date('01-JAN-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS FEB' x,to_char(to_date('01-FEB-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS MAR' x,to_char(to_date('01-MAR-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS APR' x,to_char(to_date('01-APR-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS MAY' x,to_char(to_date('01-MAY-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS JUN' x,to_char(to_date('01-JUN-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS JUL' x,to_char(to_date('01-JUL-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS AUG' x,to_char(to_date('01-AUG-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS SEP' x,to_char(to_date('01-SEP-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS OCT' x,to_char(to_date('01-OCT-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
    SELECT ' THIS IS NOV' x,to_char(to_date('01-NOV-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual)
    SELECT * FROM dat
    WHERE to_date(y,'mon/yyyy') BETWEEN to_date('01 jan 2009','dd mon yyyy') AND to_date('01 mar 2009','dd mon yyyy')Cheers!!!
    Bhushan

  • How to get data from COSP table, field HRKFT as the key to data from PM?

    Dear ladies and gentlemen!
    I need to get data from COSP table, field HRKFT as the key to data from PM tables (AFKO and AUFK).
    The problem is that it is a key field to the COSP, and all non-key fields as an alternative to HRKFT are not suitable for this task.
    All this is necessary for the extractor, which loads the data from the R \ 3 systems in the BW-system. I need to perform SELECT from a table COSP and maybe also JOIN, most likely between tables COSP and AUFK.
    What should I do in this case?
    Thank you very much in advance!

    From information on help.sap.com I've made a conclusion that one of possible solutions in theory is to modify standard extractor PM_OM_OPA_1 in order to make HRKFT field available for work, because by default it is hidden by SAP and not available for use as a key field.
    Of course, it's not a very good solution, but for now I know no other way to solve this problem.
    Maybe someone knows better ways? In this case I will be very grateful for any help!
    Moderator: You'd better post it on BI forums

  • How to get data from PDF form?

    PDF forms can send data in url like GET or POST method. Is it possible to get data from url, like in PHP http://sever/file.php?item1=value1&item2=value2&item3=value3
    In APEX url have specific construction and I don't know how to get value of items (1...3)
    Please let me help to find simple method of geting data from URL.
    Best Regards,
    Mark

    The APEX URL syntax is detailed here
    http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/concept.htm#BCEDJBEH
    How to get it from PDF is another matter...
    I'm working on an app that downloads PDFs with a Large amount of data as a blob, takes that blob and changes it to XML, then goes through the xml to validate each section of data and then add it into the schema that my apex app is referencing....
    I didn't write the original code but I do know that it isn't a quick thing to implement and includes using some uploading some java jar files to your schema and writing some custom java code.
    Someone else may be able to help with grabbing PDF data into the URL for the amounts of data you want to pass to apex.
    Gus..
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!
    Edited by: Gussay on Sep 21, 2009 5:52 PM

  • OC4J - How to get data from large table (more than 9 million rows) by EJB?

    SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS
    O I use Jdeveloper to create EJB that has finder methods to get data from a big table (more S than 9 million rows). Deploy is OK but when run client program I always get timeout
    O error or not enough memory error,
    S Can any one help me?
    O urgent
    SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS

    Your problem may be that you are simply trying to load so many objects (found by your finder) that you are exceeding available memory. For example if each object is 100 bytes and you try to load 1,000,000 objects thats 100Mb of memory gone.
    You could try increasing the amount of memory available to OC4J with the appropriate argument on the command line (or in the 10gAS console). For example to make 1Gb available to OC4J you would add the argument:
    -Xmx1000m
    Of course you need have this available as hard memory on your server or you will incur serious swapping.
    Chris

  • How to get data from php to java via xmlrpc

    I have been trying to get data from php through apache xmlrpc to java.
    I do get an value as result. The result is "Array". How how do i convert the XMLRPC Object "Array" to Java Object?
    Inside the XMLRPC "Array" Object there is object too of type Array from php.
    See code for java here
    Object result = client.execute( "blogger.getCategories", params1 );
    Code from php here
    function getCategories($appkey, $username, $password)
         global $xmlrpcerruser, $xmlrpcI4, $xmlrpcInt, $xmlrpcBoolean, $xmlrpcDouble, $xmlrpcString, $xmlrpcDateTime, $xmlrpcBase64, $xmlrpcArray, $xmlrpcStruct, $xmlrpcValue;
         $structArray = array();
         $structArray[] = new xmlrpcval(array("one" => "test"));
         return new xmlrpcresp(new xmlrpcval( $structArray , $xmlrpcArray));     
    I do get Standard String and Integer from php to Java through XMLRPC.
    Can someone help me.
    Edited by: Electron32 on Aug 13, 2010 9:44 AM

    That is what is so strange. I return an 'array' through xmlrpcval() and in Java I tried to cast it to ArrayList, Vector,String[] but get an error
    Object[] result = (Object[]) client.execute( "blogger.getCategories", params1 );
    String[] array = (String[]) result;
    Exception in thread "main" java.lang.ClassCastException: [Ljava.lang.Object; cannot be cast to [Ljava.lang.String;
            at com.dirdalit.window.Main.main(Main.java:41)
    Edited by: Electron32 on Aug 13, 2010 12:25 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for

  • Open Orders and COPA Cube

    Hi, I have a specific requirement, where we want to add open orders from sales to the existing COPA cube and also we want Existing Open order/sales pipeline reports in SAP to be moved into BI. Can any one help me on how to go about this and what shou

  • After creating a new image of my project burned from iDVD I get no audio when I import it back into iMovie HD 6.0.3

    I need to edit my project after I have already burned the project. I deleted the files after being burned to save space on my hard drive. So I made a new image of the burned project with disk utility. I opened up iMovie HD 6.0.3 and imported the movi

  • ITunes Videos (Both Movies and TV Shows) are skipping/ studdering.

    iTunes Videos (Both Movies and TV Shows) are skipping/ studdering. These videos were taken from my hard drive, converted with Format Factory, then placed in itunes. ON ipad the videos playback perfectly, but in itunes itself it fails drastically. Sam

  • Listening to itunes samples

    While in itunes, listening to samples, Im always interupted by a box that says "opening url" and then "rebuffering stream". How can I get rid of that?

  • CS2 on new vista 64bit serial # error

    im tryn to install my cs2 on a new computer that has vista. my install went fine but when i open up one of my cs2 programs it says invalid or missing info ei. serial # username etc... please help how can i make my cs2 work in vista thanks [email prot