Any hint on searching for portal components using any certain LOV ?

hi,
does anyone know how to search for all of those portal components which use a certain other component?
let's make it specific. how can i know which of the portal components (portal reports and forms, content folders, etc) are using any certain LOV?
will really appreciate any hints.
with kind regards,
naqvi

Thanks... I will am closing this but in case you have some material for me to review on the following, I will appreciate:
You wrote
1.
"You can convert standard cube to real time even if it already has data without loss this data by using program SAP_CONVERT_NORMAL_TRANS (via SE38)."
--on executing se38, and entering this program, it opened the code and I was stuck not knowing what to do.
I can make simply ABAP modification but did not know how to copy data from one cube to the other using this program
2.
"Via copying data from any other cube using IP functionality (copy function or FOX formula)."
The RSINPT was simple but I had no clue on this suggestion, any additional info specifically on this will be helpful.
In general, in real environment with large amoun of data, which method do you use?
Thanks

Similar Messages

Searching for document that uses a certain font?

Is there a way to search for a Word document that uses a specific font? There is only one possible document on my hard drive that uses this font.

There must be a way, that info is stored in the Document near the end, like...
Still working on it.

How to search for the list of portal components that use a certain LOV?

hi,
does anyone know how to search for all of those portal components which use a certain other component?
let's make it specific. how can i know which of the portal components (portal reports and forms, content folders, etc) are using any certain LOV?
will really appreciate any hints.
naqvi

Please ask this question in the Oracle Text forum (formerly interMedia text). You will get the experts that work with it every day there.

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Errors Installing Portal Components using 9iAS Enterprise on 8.1.7 SE

We are getting an error installing the Portal Components using
9iAS Enterprise on a 8.1.7 SE database. The log indicates that
the error is:
ORA-00439: feature not enabled: Function-based indexes
Errors encountered in the Install process. Installation Aborted.
While I know that Function-based indexes are not supported in SE
this should not prevent the installation of Portal.
Does anyone have any suggestions?
Thx, Paul

Its also working in our case where we have used 8.1.7 Enterprise Edition. We installed 9iAS 1.0.2.0 on NT. So if you have any issues regarding this then let me know.

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Unable to search for first record using the Preview tree

Post Author: TheBig1980s
CA Forum: General
Hello:
Users are unable to search for the first record in the Preview tab's tree. The reason for this is because the first record is within the first page header of the report. My guess is that, by design, Crystal takes the end user to whatever the first instance of the record iseven if that first record is in a page header. That's not "good". I want the user to be taken to the first record within the details of the reportnot within the page header.
I have suppressed the page header to not print on the first record by using OnFirstRecord. But, I still get the same issue where end users cannot select the first record in the tree without being taken to the page header. Very strange.
Can anybody think of any other ideas?
Thanks!
TheBig1980s

Thank you Dave Merchant and try67 for your responses. As per my previous post, I contacted the company re the catalogue and they have responded favourably. I'll include their response because it gives the reason for the search failure as document compression which you might find interesting. I'll await their new catalogue and see if they have fixed the problem.
Company response:
Thank you very much for your input. And yes, you are correct, the compression we used for the current catalogue's PDF format does strip out text included in the catalogue. We used the compression settings we did with the intention of minimising download time, however I take your point about including text for search purposes (which I also utilise when I'm scanning through PDFs).
We will actually be posting out our new catalogue next week and we'll release the new PDF version on the website at the same time. I've asked our graphic designer to ensure that the PDF we use for the new catalogue includes searchable text.

Searching for XML tags using Oracle Text

I am using full text search to find documents based on a search text. It works fine for pdf, word documents, etc. However for XML documents, searching for a particular tag name does not find anything. Searching for text within tags works fine. Any thoughts?
Edited by: miyer on Feb 21, 2011 6:25 PM

Hi
Try adding the following variable to ucm config.cfg and then see if a new xml checkin returns the result for FT search :
TextIndexerFilterFormats=xml
Save the file , restart UCM and then test .
If the new checkin gets the results as expected then execute Collection Rebuild cycle to have the existing contents as well FT indexed to be searchable (for XML).
Thanks
Srinath

Wildcard search for numeric values using select ?

Hi,
I want do wildcard search for numeric fields of the table.
For charcter/string i have used - select * from XX_TABLE where param1 like 'SS%'. But this query doesnt work when para1 is numeric. Please let me know first whether this is possible ? if yes how to achieve it ?
Thanks in advance,
Shrinivas

Hi Jack,
The numeric field is of 8 digits, so when i give search critera as '66', it should return values 66000000, 660000, 6600 etc. so i was not able to give between some range. I also tried storing all these values in internal table and the segregate the values it contains '66*'. This worked well but requires lot of coding effort.Please suggest if you guys have any better method ?
Thanks,
Shrinivas

User doc for portal components?

Is there any detailed user guide info for the Portal components?
There is decent Javadoc, but I can not find a user guide?
http://edocs.beasys.com/wlac/portals/docs/javadoc/index.html
Marko.

There is a User's Guide and Developers guide at the following link.
http://edocs.bea.com/wlcs/index.html
Marko Milicevic wrote:
Is there any detailed user guide info for the Portal components?
There is decent Javadoc, but I can not find a user guide?
http://edocs.beasys.com/wlac/portals/docs/javadoc/index.html
Marko.

Cannot search for "@" symbol when using search function

I am trying to create a calculated column which extracts the domain part of an email address. My problem is that no type of search formula (SEARCH or FIND) seems to be able to recognise the "@" symbol so I get an error stating that
"The search TEXT provided to function 'SEARCH' could not be found in the given text"
Even more bizarre is that if I do just a general search in my table (CTRL + F from inside Powerpivot) it cannot find @ symbols either. Could someone please explain why PowerPivot cannot search for the @ symbol (I haven't tested others) and whether there
is a solution?
The formula I was trying to use was:
=SUBSTITUTE(A1, LEFT(A1,FIND("@",A1)),"")
Obviously with A1 replaced by the column name of where my email data is stored.
Any help would be much appreciated.
Thanks.

Both FIND() and SEARCH() should find the "@" in PowerPivot.
I have done it many times.
You probably have one row in your data set that doesn't contain "@". That will cause the error you describe and if one row in a Calculated Column causes an error, every row has an error if you do nothing to account for it.
Try wrapping your formula in an IFERROR([Your Formula], BLANK()).
This should allow it to run successfully on valid rows and will show a blank on any rows that are causing problems.
Once you identify the problem row (or rows) you can make a decision about how to deal with it.

Searching for a substring using Regular Expression

I have a lengthy String similar to repetetion of the one below
String str="<option value='116813070'>Something1</option><option value='ABCDEF' selected>Something 2</option>"I need to search for the Sub string "<option value='ABCDEF' selected>" (need to get the starting index of sub string) and but the value ABCDEF can be anything numberic with varying length.
Is there any way i can do it using regular expressions(I have no other options than regular expression)?
thanks in advance.

If you go through the tutorial then you will find this on the second page:
import java.io.Console;
import java.util.regex.Pattern;
import java.util.regex.Matcher;
public class RegexTestHarness {
    public static void main(String[] args){
        Console console = System.console();
        if (console == null) {
            System.err.println("No console.");
            System.exit(1);
        while (true) {
            Pattern pattern =
            Pattern.compile(console.readLine("%nEnter your regex: "));
            Matcher matcher =
            pattern.matcher(console.readLine("Enter input string to search: "));
            boolean found = false;
            while (matcher.find()) {
                console.format("I found the text \"%s\" starting at " +
                   "index %d and ending at index %d.%n",
                    matcher.group(), matcher.start(), matcher.end());
                found = true;
            if(!found){
                console.format("No match found.%n");
}It's does everything you need and a bit more. Adapt it to your needs then write a regular expression. Then if you have problems by all means come back and post them up here, but first at least attempt to solve it yourself.

How to make wild card search for a file using utl_file

Hi Everyone,
I want to write to a table from flat file.im using 9i release 2. can i perform filename* (wildcard) search n write to the matching files.
Regards
Manish

Sorry can i write from those files which matches the search criteria i mean the wildcard search
for e.g COVhj*

Searching for a term using the Search tab in HTML Help doesn't find all relevant topics.

I'm using the Search tab in the HTML Help window to search for a few words. But those words are not being located within the topics. For example, one of the words for which I am searching is Australian. I can find the topic that contains that word using the Contents tab. But the Search tab doesn't find it. I have even tried copying the word from that topic into the Search box but it is not found.
Is there a known bug in HTML Help search capabilities?

Is this a stand alone CHM file or is it merged? If it is merged, does the word appear in the search in the CHM containing the topic is searched? I assume you've checked that your Stop List doesn't contain the word being searched?

Searching for missing files, using PSE6

After I have transfered a batch of photos using the -file -get photos -From files and folders, the thumbnails appear in " Organizer" but when I want to look at the photos in full screen they come up unclear and a dialogue box comes up ," searching for missing files" I then click on "browse" and the folder from which i have transfersd the photos, in "My Pictures" is not shown in the list. I have done this with an other folder of photos and it is also not shown in the list, as if they have dissapeared. The folders are still in " My Pictures"
I am totally frustrated with trying to get past first base with this program I have spent many hours trying to find a solution

It sounds like you may be encountered one of the drive-handling bugs in PSE. To diagnose that, download and run the free utility "psedbtool":
http://www.johnrellis.com/psedbtool/#_Downloading,_Installing,_andhttp://www.johnrellis.com/psedbtool/
Copy and paste the output in a reply here.

Any hint on searching for portal components using any certain LOV ?

Similar Messages

Maybe you are looking for