Any HP laptops available to connect to HP xb4 expansion dock ?
My HP laptop, Pavilion dv7-3060us, appears to have given up the ghost. I looked at HP replacements, but have used the HP docking stations for years and new models don't have the expansion connector to connect to the HP xb4 dock that I have. Does anyone know what the last HP lptop model was that included the expansion port connection that connects to the HP xb4 dock? If not, can anyone let me know whether there's a workaround that will allow me to continue using my HP xb4 expansion dock?
Thanks for any help or suggestions.
David
Thanks, BH, but the problem that I have is that new models of HP laptops no longer have the docking station cable connector port that is shown in the documentation that you provided. Without this type 3 port on the laptop, I don't believe that it can be properly connected to the docking stationand my post went to that dilemma. My only hope to continue using the docking station appears to be getting the last model HP laptop that has the expansion connector (referred to as a type 3 connector, I believe, in the dock documentation). Thus, my question as to anyone's knowledge of what HP laptop was the last of the generation that had this connector. Although the docking station documentation indicates that a secondary laptop can be connected to the dock by USB connector to make use of the peripherals attached to the dock, it is not at all clear whether the primary laptop can be connected in this fashion. It would appear unlikely that this is possible, since there would be no connection through the dock connection cable to the laptop, since there is no connector on newer model laptops. HP no longer markets the docking station, which may explain why newer laptops have no docking station cable connector port built-in to the case.
Thanks anyway for the link to the docking station documentation.
Similar Messages
-
Hi, I HATE to ask for help with this, but I HAVE looked everywhere and Google searched different wordings and have not found anything similar nor a solution to my problem! My good old iPod 4th-gen charges just fine in any wall outlet, in any house, but when I connect it to my brand new ASUS laptop that has Windows-8 and 3.0 USB ports using the charging/data cable, the charging process just keeps "blinking" BOTH the iPod and the laptop and it will not connect to ITunes and I get "A Device is Detected" message that keeps popping up and going away over and over right above the Windows desktop toolbar. When I go to control panel and select "Devices" it does show the iPod, but for only a split second and than it disappears, but than it comes back again for a split second and than it disappears again and just keeps doing that over and over and over! I have tried resetting the iPod while it is plugged into the laptop by holding the power and menu buttons, that did no good. I also tried uninstalling iTunes and any other Apple stuff listed and reinstalling it all, that did NOT work! The iPod, the laptop and iTunes ARE all fully updated! I AM using a brand new charging/data cable that I just opened up an hour ago (I've learned to keep a few brand new ones around at all times since these piece of garbage rip-off cables hardly last a week, even when you baby them!). I also tried a few old cables, they all do the same thing! I would like to get this piece of junk to connect to my new laptop, even if only once, so that I can change/delete some songs and transfer a few dozen photos,since I haven't been able to do any of that stuff since my old laptop (that NEVER had any problems connecting) died way back in May! lol. I hope somebody knows a fix or solution! Thank You!
Try on another computer to help determine if iPod or computer problem.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."
Reistallation of older or up to date iTunes versions is impossible because: "Installation package iTunes.msi is located on a network resource not available" and because "It is impossible to remuove thew previous verson of iTunes. Impossible fto find the path."
Someone can help me ???
Thank,
GeraldTake a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.
varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules -
Wrt54g laptop wireless modem connected to router but will not access in any browsers.
I started a friends laptop at my house put in the security key and it connected to my network with excellent strength. When I opened IE or Safari it said unable to access page not connected to the internet.
I went into the properties of the wireless modem and checked to see if it matched my wireless laptop. It was slightly different with not all the same options. I changed something and now I can not get it to connect at all.
I hooked the friends laptop to my lan line and it works perfectly of course, so I know it has to be in the settings.
Any answers to the first problem of browsers not connecting, And anyway you can help me get the friends laptop settings back to where they were?
ThanksConnect a computer to the Router, Open the Setuppage by 192.168.1.1 , password "admin"
Click on the Wireless tab on the Setup page- Here Wireless Network mode
should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID
broadcast should be Enabled and then click on "Save Settings" >>
Now Click on the Sub tab under wireless > "Wireless Security" Change the
Wireless security mode to "WEP"...and put a 10 digit key in key1 and keep a note of the key and click save settings ...
Then on your laptop try to connect to the netwok with the key. -
Hi! I bought my Macbook Pro 13" in october last year but from last month oftenly my WiFi connection hangs up nd stops catching any available Wifi connection?
At last I restart the modem and dn it catches the signal but that too is short lived.
please suggest some solutions
Thanking U,I have this problem on my home network but at the same time when my connection hangs up my other wifi machine remians connected. So i think there's no problem with the modem.
-
HP laptop can't connect to AirPort Extreme
My dad has an HP laptop with an 802.11G wifi card. When I enabled AirPort Disk and restarted the router, the laptop came up with a "Limited or no connectivity" error. I tried resetting the network, unplugging the router, and even extending it with an AirPort Express I own. The range without the Express is good, but the laptop can't connect. And I checked the logs and from what I can tell, the issue is on the laptop's end. Any help would be greatly appreciated!
-macfanboyCheck the encryption protocol of your network as well as the Radio mode (n with b/g compatibility). You need to select one of the protocols which is available on your laptop (e.g. WEP). I can't recall exactly, but I don't believe SP1 has WPA. WEP isn't as secure, though.
-
Network Manager doesn't show available wireless connections
I have Arch set up on a laptop. I've used it for about a month around the house without a problem. Today I did a little "road tripping," and was surprised to find that network manager wasn't showing me any wireless connections. There were no errors shown, just no connections were offered when I went to places that I know have wireless available. My experience with other distro's is that network manager will show a sidebar with the available wireless connections and let me choose whether I want to connect or not. But when I went into a coffee shop or restaurant, nothing showed up offering anything. I took a look at the network manager and wireless wiki's and didn't see anything that I might have missed during the installation. What tells network manager that there are wireless networks available?
Hi
+". . . they are exactly the same clone . . ."+
This might be where your problem begins and ends? If you joined client # 1 to OD and then cloned this to create client # 2 then you're probably going to have the problems you're seeing?
If you want all your workstations to be the same it's best to remove any references to any LDAP Server as well as any TGTs. It's also a good idea to give each client workstation unique names prior to joining an LDAP Directory after they've been imaged. You can create a NetBoot Image with an associated workflow that will define unique names as well as join an LDAP Directory as Post Install actions.
The above assumes you actually meant to post in the appropriate Snow Leopard Forum rather than the 10.4 one? Perhaps you should have posted here:
http://discussions.apple.com/forum.jspa?forumID=1349
HTH?
Tony -
I'm facing a bit of a problem.
Any folder I copy from my Macbook Pro to my External Hard Disk does NOT appear on any other device that I connect the Hard Disk to (TV, PC, etc).
The Hard disk format is "MS-DOS (FAT)".
The folders that are copied from Macbook appear when I connect the Hard Disk to my Macbook only, yet, the folders that I copy from a PC to the Hard Disk appear on Macbook, PC, and TV and are also available from editing from both Mac and PC.
I was advised to install "Paragon" software and I did but I'm not sure how to use it to convert the folders on the hard drive to any format that can be read on other drives or devices (NTFS or otherwise).
I'd appreciate some help. Thank you.Hi Simon. How is it formatted, FAT or NTFS?
I only ask as OSX will only read NTFS partitions unless you install an App such as Paragon NTFS or Tuxera NTFS. -
Failure of server APACHE bridge::No backend server available for connection
All,
I have an env: Browser -> OHS -> WLS(Apex Listener) -> Oracle DB.
If any SQL run for more than 5 mins, i get the below error.
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.The only error i get is from the OHS's log
[2013-04-03T06:45:57.2946-05:00] [OHS] [ERROR:32] [] [core.c] [host_id: aa050] [host_addr: 121.146.60.102] [tid: 1260554560] [user: oracle] [ecid: 004qNDJn1du7m3KaETn3ES0004Ll00001T] [rid: 0] [VirtualHost: my.team.com:443] ap_proxy: trying POST /pls/apex/wwv_flow.show at backend host 127.0.0.1/7003; got exception 'Backend Server not responding'; state: reading status line or response headers from WLS (wrote? Y read? N); not failing over because method not idempotent, referer: https://my.team.com/pls/apex/f?p=4500:1003:16571271664493::NO:::Is there a timeout variable other than the below in WLS?
Session Timeout (in seconds): 3600 .
TIA,
JJRegardless of the version, this is not exactly a "Forms" failure. This is an issue between OHS and WLS. Basically it means that OHS (via mod_wl_ohs) was unable to communicate with WLS_FORMS (or whichever managed server you are trying to access). Most often this means the managed server is not running or not responding. If you believe it is running and is responsive (test by hitting it directly) then the problem is probably related to your installation. Generally, if you have not properly configured your networking before you installed WLS and FMw, then this can occur. For example, on Windows machine which do not have static IP addresses, the Installation Guide instructs you to install the Windows loopback adapter and configure it. If you did not do this, OHS likely will not be able to contact WLS_FORMS.
You can test what I have described above by attempting to access WLS_FORMS directly. For example:
http://yourHost:9001/forms/frmservlet
If that works, the issue is probably related to a net config issue.
If you have access to MyOracle Support, refer to these notes:
<blockquote><li>Failure Of Server APACHE Bridge After Running Report From Forms 11gR2 on Windows 64-bit platform (Doc ID 1457845.1)
<li>Oracle Fusion Middleware 11g - Troubleshooting the Error "Failure of server APACHE bridge" (Doc ID 1304095.1)</blockquote>
The product Documentation Library can be found here:
http://docs.oracle.com/cd/E24269_01/index.htm -
Authentication failed because Outlook doesn't support any of the available authentication methods.
When attempting to check and send email from my Mac via iCloud, I keep getting the error "Authentication failed because Outlook doesn't support any of the available authentication methods." I have change just about everything I can see available, but continue to get this message.
I am able to send email via iCloud using my .Me and .Mac adresses, and that tells me that it is not able to store "sent emails" on iCluud and will store them loaclly on my computer. I can handle this, but whem going to iCloud Web page haave nothing withing the "sent" mailbox.
Using OS 10.7.2, and Outlook 2011 version 14.1.3
Thanks in advance......I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server. -
Upgraded my computer to 10.9.2 Mavericks and now my 2011 outlook gives the following error: "Authentication failed because Outlook doesn't support any of the available authentication methods." Anybody know how to fix it? Thank you.
I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server. -
Urgent : Is there any c++ parsers available for reading tnsnames.ora
I have to parse the tnsnames.ora and get the connection string , host name , instance name , port etc .. and store it in my local memory structure . Is there any c++ parsers available , which parses and gives the desired output or do i have write my own parser .
You're right...the database connections work fine if I define them manually rather than reading them from the tnsnames.ora file.
I was hoping to have many users running SQL Developer so using the tnsnames.ora file might save people's time and reduce the number of database connection-related support calls.
If worse comes to worse, I can create an XML file to define the database connections. The only drawback to this is that we have an automated procedure to update people's tnsnames.ora whereas there is currently no way to keep the XML file up-to-date. -
Windows laptops can't connect to Macbook Pro shared internet when WEP security is on
As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on. My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required. When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password. The same thing occurs on my Asus Netbook running Windows XP. Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products. I want my MacBook Pro to save me from needing an external router.
I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
These links may be useful:
AirPort- Joining an encrypted WEP or WPA Wi-Fi network
AirPort Express- Difficulty joining 3rd-party network that is using WEP -
How can I connetct internet on my ipad mini (non cellular) without wifi ? is there any wifi adapter available ?
You can not connect to the internet with a WiFi only iPad without WiFi. You can get a mobile hot spot from your carrier but that still connects to the iPad via WiFi and comes with a monthly data plan like a cell phone.
Maybe you are looking for
-
I HAVE TABLE ABC WITH TWO COLUM ENO NUMBER(3) ENAME VARCHAR2(10); SELECT ENO,ENAME FROM ABC ENO ENAME 123 SMITH 423 ALLEN 332 DAVID 562 AMUL 678 KING 986 GEORGE 621 ANDY I WILL PASS PARAMETER TO MY SQL FOR EXAMPLE LIKE 143 I NEED OUTPUT LIKE ENO ENAM
-
How long should the logs last? (sawmill)
it seems the logs can only be shown for the entire two weeks. is there a possibility to make it 3 months? or is there any retention period? if there's any thread/documents/KB link please post Thanks, Rommel
-
A week or two ago I purchased a new iMac for the office. When I set it up, I migrated all my files and applications from the old computer to the new one. The new one has had a few bugs since then (which is a different, longer story), so I decided to
-
I can't undo the first thing I do in Elements 13. What this means is that I open a file, draw a line with the brush tool, try to undo and I can't. (I've tried esc, ctrl +Z, there's no undo icon in the task bar, and there's no Undo under Edit in the
-
Using AD exclusively to authenticate over WPA
This is more of a curiousity question than anything. Is there a way to bypass ACS and authenticate wireless clients using AD? We run a WLC 4400 with version 4.2.207.0 and I was just wondering.