Any idea how they did this??
Hey guys check this out, does anyone have any idea how they did this http://www.adidas.com/campaigns/styleessentials2010/content/Default.aspx?headerType=discre et&strCountry_adidascom=us#/journey
I would like to emulate this technique if I can.
that's masking with dynamically created movieclips (or sprites) and some additional dynamically created objects.
Similar Messages
-
My clips don't appear. They appear as blue boxes.
I have to click through them to reveal them each time I need to do an edit... which slows up the process on a big edit right now.
Any ideas how to fix this?
With thanks,
SteveI may have solved my own issue. I clicked on one of my clips (or you can click on all your clips for that matter) in the event browser, opened the inspector tab and clicked on the 'Info' tab, then the 'settings' drop down at the bottom of the inspector window. I then clicked on 'apply custom name' and then clicked 'original name from camera'.
So far all my thumbnails are visible and I've been working for 1hr since my last post with no thumbnails going BLUE on me. They are all still visible. Give it a try and let me know if it works for you.
Best Regards. -
For some reason when i send texts now they are saying that they come from my email address. any ideas how to fix this?
Check Settings>Messages>Receive At>Caller ID, make sure it's set to your phone number not your email address.
-
When I enable WI-FI on my iphone4 and connect to my network I do not receive emails from my AOL account, however, I receive emails from my corporate outlook exchange account. When WI-FI is disabled I receive emails from each account. Any ideas how to correct this? Thanks in advance.
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back soon. -
When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?
Firstly, I should have typed speedtest.net previously.
Now that's an interesting comment you make, out of interest do you have any purchased HD movies in your iTunes collection, if so, do they play on the Apple TV with your new tv. -
I am trying to install the OS Mavericks upgrade on my MAC and it requests for me to enter an administrator password. I do not use an an administrator password on the machine. Any ideas how to resolve this?
If you bought the machine new yourself, and did not enter a password when configuring it, leave the field blank.
If you bought it used, then you need to reset the password, as described here:
Apple Article to reset the password -
My mail will not delete. When I move it to trash and then delete it, within a few minutes it has all bounced back in again. Checked my preference settings and all seems to be in order. Any ideas how to resolve this frustrating problem?
That sounds like a compatibility issue with an add-on that you have installed, as reported by a number of users in both Firefox 22 and Firefox 23 over the last couple of months. If you would provide a listing of your installed extensions ''(as you were prompted to do when creating this thread)'' maybe one of us can advise you which extension is the mot likely culprit. You will need to re-install Firefox 23 to do further diagnostic testing.
As far as the compatibility of Firefox 23 and Win XP SP3, Mozilla has verified they are compatible and not one user ''(including me on two separate PC's)'' has reported a problem with compatibility. -
Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?
Hey ilyaz20360341,
Could you please specify how exactly did you transfer Acrobat from one MAC to other.
You might need to deactivate the software from your old machine and then activate it on the new one with the same serial number (for Acrobat license) or Adobe credentials (for Acrobat subscription).
If you have done the same way, then let me know if you are able to open Acrobat itself.
Do you get any specific error message while opening a PDF?
Hope to get your response.
Regards,
Anubha -
the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?
Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
- I tested the headphones and speakers on other devices: they work fine.
- When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
Many thanks indeed!
NG -
the wifi i have been using for months quit working yesterday. any ideas how to fix this?
HELP!!!Is your Wi-Fi visible?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
iOS: Troubleshooting Wi-Fi networks and connections
Did you check your router?
iOS: Recommended settings for Wi-Fi routers and access points -
since i updated my Apple ID with correct email address I can now only send imessages to email addresses and not iphone numbers - any idea how to fix this problem ?
You might want to try contacting Apple for assistance by going to https://expresslane.apple.com, then click See All Products and Services>iTunes>iTunes Store>Passwords & Security Questions>Lost or Forgotten Apple ID password. They should be able to explain what's going on and help you reset the password for the old ID if necessary. The call should be free.
-
Header 1
Header 2
when synching iPhone i get the following message: iTunes could not sync contacts to iPhone because the sync server failed to sync the phone. any idea how to fix this problem?Did you try the solutions mentioned in this article? iTunes for Windows: "Unable to load data class information from sync services" alert
-
purchased new songs from itunes and when I clicked on the Sync button those new songs are not added to my ipod nano. Have any idea how to resolve this problem?
Do you have the right boxes checked to sync the music to your iPod?
iTunes: Syncing media content to iOS devices and iPod
Do they play in iTunes on the computer?
Have you successfully synced music form this iTunes library/computer before? -
I am trying to pair my cell phone and tablet using Messages App, but only MMS messages will come through on my tablet. I've tried pairing and unpaired, reinstalling app on my tablet, and can't figure it out. Any idea how to fix this?
ThanksI Shared my most ridiculous situation but didn t log under your problem.
sorry, I gave you your answer under sunshine99 or Dianna. I want out and you want in.
if you not find just email me at [removed]
thanks
Personal information removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator -
I updated my Mac Book Pro to Yosemite, now it says it's not compatible with my Cannon copier. Any ideas how to fix this problem so I can use my Cannon copier again? Thanks for any help!
If MF4150 is correct...
http://www.usa.canon.com/cusa/home
search MF4150
click >Drivers & Software
Verify or choose Yosemite 10.10 - then click the [+]
Again verify Yosemite > click agree > click [DOWNLOAD]
The rest should be self-explanatory
ÇÇÇ
Maybe you are looking for
-
Logic for retreiving the values from a dynamic internal table
Hi all, I have an issue with the logic to fetch data from a dynamic internal table into fields. let me give you guys an example the sy-tfill = 9 (subject to vary). I need to populate the fields. Regards, Sukumar
-
How can I repair organizer in adobe photoshop elements 6.0?
I ran the optimizer in Norton and after that I couldn't get to the organizer in adobe photoshop elements 6.. When I try to reinstall the program it says to "insert disc 1". (I am sure you know because lots of people with adobe have this same proble
-
Query works in SQL Developer but not in APEX
The query below runs fine in SQL Developer. I have tried entering it both as a Report Region based on SQL Query and in a Dynamic PL/SQL Region. I get different error messages in each. In the Dynamic PL/SQL Region I get the error that an INTO clause i
-
How to automatically create a script based on XML input
I was wondering if it is possible to automatically generate a script in Flash itself, so like a plug in or something that I can build that will allow me to take in an xml document and generate scripts on certain frames in certain movie clips or is it
-
Want to see substituted workitems in inbox but not Manage Substituion optio
HI guys, Our users want to view the substituited workitems in the UWL. Thus, to display, we configured "Display substituted user selector" in uwl iview. However, this also displays "Manage Substituition" option in the context menu, which we do not wa