Any idea on an update on 7.5.2 for airport extreme

Does anyone know if there will be an update to 7.5.2 for airport extreme?

The latest firmware for the Extreme is 7.5.2

Similar Messages

Any Ideas ERROR U44M1P7 Update to Camera RAW 8.1(CS6) plug-in Fails to Update

Any Ideas ERROR U44M1P7 Update to Camera RAW 8.1(CS6) plug-in Fails to Update

Hi jper_pixated_com
Please refer : http://forums.adobe.com/message/5391508

I try to update the software of an Iphone or Ipad with the Itunes of the MacBook Pro. It downloads the software but at the end always the comment shows up that the download failed and i should try again. Any ideas, I already updated the iTunes software.

I try to update the software of an Iphone or Ipad with the Itunes of the MacBook Pro. It downloads the software but at the end always the comment shows up that the download failed and i should try again. Any ideas, I already updated the iTunes software.

stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad?

Hello Mac Friend, do you have any idea the compatible of 1333Mhz 16GB ecc module for MacPro late 2012 ?

Hello Mac Friend, do you have any idea the compatible of 1333Mhz 16GB ecc module for MacPro late 2012 ?

You can spend months developing the expertise to choose exactly the right modules for a one-off purchase of RAM for your Mac.
Or you can deal with a Mac-centric Vendor who already knows this information and will provide the correct modules for your exact model Mac, and stand behind them, for about the same price. Deal with Vendors who say:
"It works in your Mac,
or your money BACK."
In the US, OWC (at MacSales.com) provides good support
Many readers recommend crucial, I personally do not.
I do most of my business with DataMemorySystems.com, as they tell you exactly what they are sending and have slightly better prices than OWC.
If you are in another part of the world, please respond with what markets are available to you and readers can make additional recommendations.
EDIT: 16GB DIMMs for this Mac are Registered DIMMs, and are subject to special rules:
They do not mix with other sizes AT ALL.
At most 3 modules of this size can be installed on each SIDE (6 total on the 8-core and 12 core)

Any idea when Apple will have a raw converter for the fuji x10

Any idea when Apple will have a raw converter for th eFuji X10. Might have to switch to Lightroom!

We are just users like you, so we can only guess - this is a user-to-user forum, sorry. Send feedback to Apple, if you want them to listen.

Any Idea when Apple will email the redemption code for Mountain Lion?

Any Idea when Apple will email the redemption code for Mountain Lion? I got a code but it said it was invalid on the app store. When will this issue be solved? Kind of getting impatient, given I dropped 2k over their product...

Any Idea when Apple will email the redemption code for Mountain Lion? I got a code but it said it was invalid on the app store. When will this issue be solved? Kind of getting impatient, given I dropped 2k over their product...

Any ideas what Apple is keeping under the wraps for official io7 release in fall?

Any ideas what Apple is keeping under the wraps for official io7 release in fall? Seen the reviews but I was really looking forward to the swype feature. Strange why Apple is keeping quiet on that?

Hi sanagoesapple,
This is all we know about it:
http://www.apple.com/ios/ios7/
We are just users like you - we have no inside information....
Cheers,
GB

Despite formatting I am unable to italicise words? any ideas please I have to submit an essay for my MA degree in 2 days!

Despite usin the formatting button and shortcut I am unable to itallicise words - (the bold and underline work) Any ideas please - I need to submit an essay for my MA degree in 2 days and need the Harvard referencing right!

Windows fakes an Italic by making it lean at an angle.
Tahoma doesn't actually have an italic and Apple has adopted a strict WYSIWYG with fonts since OSX came out.
Choose another font. The separate styles will be list in the Font palette.
Peter

Are there updates available for Airport Extreme? If there are, will I be notified of an available update?

Are there updates available for Airport Extreme? If so, will I be notified or should I check from time to time for any updates?

Back up your data, check your applications for compatibility, and download Mavericks from the Mac App Store.
(108187)

Any idea on Premiere update?

Needing to use Mercury Playback to speed things along, and I'm assuming the problems with crashing will be fixed with an update. Any idea on how soon it might come?

Just a guess but you must have a Mac, since I do not see that to be a problem on the PC side.
Sorry but no idea and anyone who has cannot tell you

Any idea when Vista update will be delivered?

Hello!
I applied for a Vista upgrade a couple of month ago and my status of the COA is validated according to the moduslink website, so it should all be fine. But Vista is already on the market and I haven't received a copy yet. Any idea when Moduslink will start to deliver the upgrade packs?
Thank you!
Alex

Hello again!
Thank you but it seems that you have quite long for someone to answer the phone, so maybe someone has an idea regarding the order status.
When I logon to the upgrade-website in order to check my status, I can see the message COA validated. Should I see another status like order verified or is COA validated enough and I just have to wait?
Has anyone else applied for the upgrade and maybe got another order status after sending in the receipt for the lapopt? Or any information what the status might mean?
Thanks!
Alex

Any ideas on how to do a local mirror for this situation?

I'm starting a project to allow ArchLinux to be used on a Cluster environment (autoinstallation of nodes and such). I'm going to implement this where I'm working right now (~25 node cluster). Currently they're using RocksClusters.
The problem is that the connection to internet from work is generally really bad during the day. There's a HTTP proxy in the middle. The other day I tried installing archlinux using the FTP image and I took more than 5 hours just to do an upgrade + installing subversion and other packages, right after an FTP installation (which wasn't fast either).
The idea is that the frontend (the main node of the cluster) would hold a local mirror of packages so that when nodes install use that mirror (the frontend would use this also, because of the bad speed).
As I think it should be better to only update the mirror and perform an upgrade not very often (if something breaks I would leave users stranded until I fix it), I thought I should download a snapshot of extra/ and current/ only once. But the best speed I get from rsync (even at night, where an HTTP transfer from kernel.org goes at 200KB/s) is ~13KB/s this would take days (and when it's done I would have to resync because of any newer package that could have been released in the meantime).
I could download extra/ and current/ at home (I have 250KB/s downstream but I get like ~100KB/s from rsync), record several CDs (6!... ~(3GB + 700MB)/700MB) but that's not very nice. I think that maybe this would be just for the first time. Afterwards an rsync would take a lot less, but I don't know how much less.
Obiously I could speed things a little If I download the full ISO and rsync current using that as a base. But for extra/ I don't have a ISOs.
I think this is a little impractical (to download everything) as I wouldn't need whole extra/ anyways. But it's hard to know all packages needed and their dependencies to download only those.
So... I would like to know if anyone has any ideas on how to make this practical. I wouldn't wan't my whole project to crumble because of this detail.
It's annoying because using pacman at home, always works at max speed.
BTW, I've read that HOWTO that explains how to mount pacman's cache on the nodes to have a shared cache. But I'm not very sure if that's a good option. Anyway, that would imply to download everything at work, which would take years.

V01D wrote:After installation the packages that are in cache are the ones from current. All the stuff from extra/ won't be there until I install something from there.
Anyway, if I installl from a full CD I get old packages which I have to pacman -Syu after installation (that takes long time).
Oh, so that's how is it.
V01D wrote:
I think I'm going to try out this:
* rsync at home (already got current last night)
* burn a DVD
* go to work and then update the packages on DVD using rsync again (this should be fast, if I don't wait long time after recording it)
And to optimize further rsync's:
* Do a first install on all nodes an try it out for a few days (so I install all packages needed)
* Construct a list of packages used by all nodes and frontend
* Remove them from my mirror
* Do further rsync updates only updating the files I already have
This would be the manual approach of the shared cache idea I think.
Hmm... but why do you want to use rsync? You'll need to download the whole repo, which is quite large (current + extra + testing + community > 5.1GB, extra is the largest). I suggest you to download only those packages and their dependencies that you use.
I have similar situation. At work I have unlimited traffic (48kbps at day and 128kbps at night), at home - fast connection (up to 256kbps) but I pay for every megabyte (a little, but after 100-500 megabytes it becomes very noticeable). So I do
yes | pacman -Syuw
or
yes | pacman -Syw pkg1 pkg2 ... pkgN
at work (especially when packages are big), then put new downloaded files on my flash drive, then put them into /var/cache/pacman/pkg/ at home, and then I only need to do pacman -Sy before installing which takes less than a minute.
I have 1GB flashdrive so I can always keep the whole cache on it. Synchronizing work cache <-> flash drive <-> home cache is very easy.
P.S.: Recently I decided to make complete mirror of all i686 packages from archlinux.org with rsync. Not for myself but for my friends that wanted to install Linux. Anyway I don't pay for every megabyte at my work. However it took almost a week to download 5.1 GB of packages.
IMHO for most local mirror solutions using rsync is overkill. How many users are there that use more than 30% of packages from repos? So why to make full mirror with rsync when you can cache only installed packages?

Any idea how you can safely use ONE computer for BOTH work and internet?

I'm planning to set up a small music project studio, built around a powerbook, that I will be sharing with a friend of mine. My friend is going to use the computer for music AND heavy internet use, but I will only use it for music work (off-line).
The thing is then that I am slightly worried about viruses, worms, spyware and similar unwanted stuff 'sneaking in' when the laptop is online. Even with firewall and anti-virus I guess there is always a risk.
Any idea if there is a way of keeping things completely separate?
How about if I had a bootable external hard drive for my work, with the Mac OS system on. Then when I'm working I could boot up from that drive (and use the computer off-line).
Maybe we could even remove the internal hard drive from the powerbook (?), and use the powerbook with two external hard drives instead: One bootable drive for me and another bootable drive for my studio partner (and then only connect one hard drive at the time).
Any idea if this would work well..? (I'm not sure if i.e. a virus could sneak in anyway, through the PRAM, L2 cache or the RAM or something similar) Or does anyone have any other suggestions...? Any ideas much appreciated. Thanks!

Not too much worry with Macs, but get an Ethernet Router, skip Wireless, use strong Passwords.
How about if I had a bootable external hard drive for my work, with the Mac OS system on. Then when I'm working I could boot up from that drive (and use the computer off-line).
Excellent idea, especially if the heavy Net user doesn't have Admin rights.
One bootable drive for me and another bootable drive for my studio partner (and then only connect one hard drive at the time).
Just about foolproof! Just need 2 more drives for backup. Not sure why you'd want to remove the internal HD though.
No Viruses yet in OSX land, in fact the only Malware I know about requires you to install it for itself!
You'll be OK, that separate drives idea is pure genius.:-)
Most don't need it on Macs, but here ya go on the Mac side...
ClamXAV, free Virus scanner...
http://www.clamxav.com/
Little Snitch, stops/alerts outgoing stuff...
http://www.obdev.at/products/littlesnitch/index.html
HenWen/Snort combo, that is a free MAJOR Firewall...
http://seiryu.home.comcast.net/henwen.html
Then the venerable old Brickhoues/Flying Buttress Firewall...
http://personalpages.tds.net/~brian_hill/downloads.html
WaterRoof is a firewall management frontend with bandwidth tuning, NAT setup, port redirection, dynamic rules tracking, predefined rule sets, wizard, logs, statistics and other features.
http://www.macupdate.com/info.php/id/23317
Monitor net usage...
http://mac.softpedia.com/get/Dashboard-Widgets/Information/Videotron-Internet-Us age-Monitor.shtml

HT4623 I can't get to my settings, buttons not working and I just have a white screen. Any ideas on what is going on? Thanks for any help

I have tried everything I know of. It worked fine an hour ago. I have a white screen, buttons will not turn it off and I get get to anything. Any ideas whats going on?
Thanks for any help.

Sunny1963 wrote:
I have tried everything I know of.
That's fine - except nobody here knows what you have been able to think of try to this point.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
It really helps if you let others know "what you know of" and already tried.

Can't connect philips mci298 to airport express. Any ideas? security WPA2, could it be firewire in airport express, and how to solve it?

Philips means that it could be a firewire problem from Airport Extreme. Any ideas to solve it. Philips MCI298 can find the name of the network, men can’t connect.

Problem solved. I needed to go to the airport base and make it possible for the WPS to function, with a PIN code from the Philips MCI298

Any idea on an update on 7.5.2 for airport extreme

Similar Messages

Maybe you are looking for