Any idea on BIN$r7e6OHuSTbWWGQBa3KvfIQ==$0?

All,
I'm still naive in Oracle.
When I issued 'select * from tab' in my local DB, have seen a table entry with name as 'BIN$r7e6OHuSTbWWGQBa3KvfIQ==$0' which is not viewable.
Any idea on this? Is that of any system related table?
This simply disappears after sometime when i issue again 'select' statement.
Please throw some light into this.
Thanks,
Seetharaman.

Hi,
It's a object from recycle:
Read this:
http://www.orafaq.com/node/968
Regards,
Thiago Hyppolito

Similar Messages

HT201263 My Ipod will not restore after following the instructions. Any ideas besides binning it and getting a Samsung?

How do I get my ipod touch to restore? I have followed all of apples instructions to no avail.

What exactly happens when you try to restore?

My trash bin is empty, when I delete one item and try to empty trash it say there are 6 items to delete? Any ideas?

My trash bin is empty, when I delete one item and try to empty trash it say there are 6 items to delete? Any ideas?

Try holding down the Option key when emptying the Trash.
If that doesn't help, try here > Mac troubleshooting: What to do when the Trash won’t empty
This free utillity is handy for stubborn trash > Download Trash It! for Mac

Am using osx lion 10.7.2 on a mid 2010 macbook, and cannot empty my trash bin. it verifies files to delete and then quits. anyone got any ideas how to fix this?

am using osx lion 10.7.2 on a mid 2010 macbook, and cannot empty my trash bin. it verifies files to delete and then quits. anyone got any ideas how to fix this?

This utility may help > Download Trash It! for Mac - Force-empty your trash can. MacUpdate.com

I have a super slim usb 2.0. Can't get it to work on macbook air. Any ideas?

I have just bought a super slim usb 2.0 disc drive but I can't get it to work on my macbook air and now a dvd is stuck in it! Any ideas?

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

I have been trying to download ITunes for several times and the same error message appear when I launch ITunes ''program can't start because MSVCR.dll is missing'' any idea what I need to do to correct this?

I have been trying to install iTunes several times, I keep receiving the same message when I open it:
iTunes.exe - system error
The program can't start because MSVCR80.dll is missing from your computer.Try reinstalling the program to fix this problem.
You bet I have tried, numerous times, it keeps coming back and iTunes won't start.
Any idea?
Yevass.

Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!

No contacts show up after setting up CardDav with gmail- any idea how to fix?

No contacts are showing up after setting up CardDav with gmail. Any idea why?
Here is how i setup CardDav (with no success)
1. I removed my old gmail account that was setup with the Exchange protocol, checked that my Exchange-Gmail contacts were no longer showing in my Contacts app, then rebooted my iPad.
2. I setup my gmail contacts with the CardDAV protocal as per google's instructions (which match everyone's instructions when I googed to troubleshoot). Google's instructions can be found here: http://support.google.com/mail/bin/answer.py?hl=en&answer=2753077 .
3. No contacts showed up in my contacts app. I have verified all of Google's troubleshooting tips such as ensuring SSL in enabled, etc. There were no problems or error messages when verifying my username and password. I also checked to make sure my contacts were in Google's "My Contacts" group, which they were.
After pulling my hair out a little, removing the account and going through the steps over and over for an hour, I have given up and gone back to syncing my contacts with the Exchange protocol as per: http://support.google.com/a/users/bin/answer.py?hl=en&answer=138740 . My contacts show up instantly with this method.
I would like to get cardDAV working, since Google is phasing out Exchange ActiveSync, and CardDAV seams to support more fields etc (although it is not Push sadly).
Any ideas? Thanks for your reply if you can think of anything.

Hey there AppJunkie ...
I'm having this issue too. The odd thing about it is that when using my iOS devices, all of the contacts (and other address books) all show up exactly as I expect and want them to. Now, on Mac OS X, that's a different story. There doesn't seem to be the same functionality between the two Apple operating systems.
Quite frustrating, as I have clients who expect these to work with no problem on their Mac desktops, since their mobile devices work perfectly. They let me know their mobile devices work, and they want the problem fixed. I have nothing I can say or even suggest. It is very discouraging.
I have not been able to find any fix or workaround for this, unfortunately.
~Laz

Err in set up (RH52) Oracle. svrmgl... Any Ideas..

Everything went smooth with Oracle 8 setup until svrmgl.
I believe that oracle was trying to look up the error text. But
could not get the error text so displayed another error. So
there is actually 2 errors here. Anyone have any ideas....
----- Start of error
[oracle2bilbo admin]4 svrmgrl
Oracle Server Manager Release 3.0.5.0.0 - Production
Message 4505 not found; No message file for product=SVRMGR,
facility=MGR
Error while trying to retrieve text for error ORA-12571
SVRMGR. connect internal
Message 701 not found; No message file for product=SVRMGR,
facility=MGR
Message 701 not found; No message file for product=SVRMGR,
facility=MGR
Error while trying to retrieve text for error ORA-12571
SVRMGR. exit
----- End of error
-Script I was following ---------------------------------------
su - oracle
[login(su - oracle) will cd to /oracle/home and source
.bash_profile]
View/edit listener files.
/u01/app/oracle/products/8.0.5/network/admin
cp listener.ora listener.ora.bup
cp tnsnames.ora tnsnames.ora.bup
Run:
vi tnsnames.ora
Copy ORCL = ..., and make a new alias of da82
da82 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL= TCP)(Host= xxx.xxx.xxx.xxx)(Ports=
1521)
(CONNECT_DATA = (SID = ORCL))
Startup DB sequence:
svrmgrl
---- End of script ---
--- start of my stuff
--- tnsnames.ora file
# Installation Generated Net8 Configuration
# Version Date: Oct-27-97
# Filename: Tnsnames.ora
extproc_connection_data =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = ORCL))
(CONNECT_DATA = (SID = extproc))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL= TCP)(Host= bilbo.irschick.com)(Port=
1521))
(CONNECT_DATA = (SID = ORCL))
da82 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL= TCP)(Host= bilbo.irschick.com)(Port=
1521))
(CONNECT_DATA = (SID = ORCL))
ORCL_BEQ =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = BEQ)(PROGRAM =
/u01/app/oracle/products/8.0.5)
(argv0 = oracleORCL)
(args = '(DESCRIPTION =
(LOCAL=YES)(ADDRESS=(PROTOCOL=BEQ)))')
(envs =
'ORACLE_HOME=/u01/app/oracle/products/8.0.5,ORACLE_SID=ORCL')
------ END OF TNS NAMES
-- START Error LOG ---
[This is what happened to me.
[oracle2bilbo admin]4 svrmgrl
Oracle Server Manager Release 3.0.5.0.0 - Production
Message 4505 not found; No message file for product=SVRMGR,
facility=MGR
Error while trying to retrieve text for error ORA-12571
SVRMGR. connect internal
Message 701 not found; No message file for product=SVRMGR,
facility=MGR
Message 701 not found; No message file for product=SVRMGR,
facility=MGR
Error while trying to retrieve text for error ORA-12571
SVRMGR. exit
... Also similar messages when starting the listener..
[oracle@bilbo /etc]$ lsnrctl start listener
LSNRCTL for Linux: Version 8.0.5.0.0 - Production on 30-JAN-99
16:51:42
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Message 1070 not found; No message file for product=NETWORK,
facility=TNSTNSLSNR for Linux: Version 8.0.5.0.0 - Production
NL-00280: Message 280 not found; No message file for
product=NETWORK,
facility=NL [listener.log]
NL-00278: Message 278 not found; No message file for
product=NETWORK,
facility=NL
SNL-00016: Message 16 not found; No message file for
product=NETWORK,
---- MY set variables---
BASH=/bin/bash
BASH_ENV=/home/oracle/.bashrc
BASH_VERSION=1.14.7(1)
COLUMNS=80
DISPLAY=slugnt:0.0
ENV=/root/.bashrc
EUID=502
HISTFILE=/home/oracle/.bash_history
HISTFILESIZE=1000
HISTSIZE=1000
HOME=/home/oracle
HOSTDISPLAY=slugnt:0.0
HOSTNAME=bilbo.irschick.com
HOSTTYPE=i386
IFS=
LD_LIBRARY_PATH=/u01/app/oracle/products/8.0.5/lib:/lib:/usr/lib
LINES=24
LOGNAME=oracle
MAIL=/var/spool/mail/root
MAILCHECK=60
OLDPWD=/u01/app/oracle/products/8.0.5/network/admin
OPTERR=1
OPTIND=1
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/products/8.0.5
ORACLE_OWNER=oracle
ORACLE_SID=ORCL
ORACLE_TERM=vt100
OSTYPE=Linux
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/root/bin:/usr/
share/java
/jdk/bin:/usr/i486-linux-libc5/lib:/home/oracle/bin:/u01/app/orac
le/products
/8.0.5/bin:.
PPID=19029
PS1=[\u@\h \W]\$
PS2=
PS4=+
PWD=/home/oracle
SHELL=/bin/bash
SHLVL=4
TERM=xterm
TERMCAP=xterm|vs100|xterm terminal emulator (X11R6 Window
System):am:km:mi:ms:xn:xo:co#80:it#8:li#24:AL=\E[%dL:DC=\E[%dP:DL
=\E[%dM:DO
=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=
^N:bl=^G:cd
=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct
=\E[3k:dc=\
E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:is=\E[r\E[m\E
[2J\E[H\E[?
7h\E[?1;3;4;6l\E[4l:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E
[15~:k6=\E[
17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^
H:kd=\EOB:k
e=\E[?1l\E:kh=\E[@:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=
\E[1m:me=\
E[m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:
ta=^I:te=\E
[2J\E[?47l\E8:ti=\E7\E[?47h:ue=\E[m:up=\E[A:us=\E[4m:
TMPDIR=/var/tmp
UID=502
USER=oracle
USERNAME=oracle
WINDOWID=41943054
_=pwd
null

Sign into one account, then save any photo stream photos to your camera roll, open and email any notes you may be syncing with the account to yourself so you can copy/paste the text into new notes in the other account, then tap Delete Account and choose Keep on My iDevice when prompted. Then sign into the other account and choose Merge to merge the data from the first account with the data from the second.

I am unable to verify my account as apple have not sent an email and its been more than 24 hours. Any ideas?

I have just bought a new ipone 4, set up ok but have tried to purchase some apps from the store. I need to verify my account first - fair enough - but although I get the prompt from apple I never end up getting an email. Any ideas how to mend this?

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Go to Mannage apple id, attempt to sign in, if your infomation si correct it'll tell you where it's routing the verfication email
Tell it to send it, it should send, if you can sign into Manage Apple ID in the above link your apple id is set

Creative cloud photoshop keeps crashing at start up any ideas why?

creative cloud photoshop keeps crashing at start up any ideas why?

SOLUTION:
Navigate to
C:\Program Files\Adobe\Adobe Photoshop CC 2014
Locate sniffer.exe and rename it ~sniffer.exe
SOLVED
This solution was offered by Adobe chat support, after a very long and fruitless exchange. Apparently, the support tech finally asked around, and someone else in the room gave him the correct answer.
Adobe: I understand you are unable to launch Photoshop CC 2014 as getting error Adobe Photoshop CC 2014 has stopped working on your Windows 7 computer, is that right?
Me: Correct
Adobe: Thank you for confirming the issue.
Adobe: I will be glad to help you with this.
Me: PS goes through initialization, then quits
Adobe: Please click on start Button and type Event Viewer and open Event Viewer Window.
Adobe: Once you have it open, let me know .,
Me: Done
Adobe: Now please expand Windows Logs option and select Applications.
Me: Done
Adobe: You will get Notification on right as Error , Warning, Information
Adobe: Please check if you have any Error Notifications.
Me: Yes
Adobe: If yes, please double click on Error Notification and check if it is for Photoshop
Adobe: If yes, please copy the information and paste on this chat.
Me: Faulting application name: Photoshop.exe, version: 15.1.0.148, time stamp: 0x53d97a8f Faulting module name: atiocl64.dll, version: 2.3.451.0, time stamp: 0x4cfd9adc
Me: + System - Provider [ Name] Application Error - EventID 1000 [ Qualifiers] 0 Level 2 Task 100 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2014-08-20T19:17:45.000000000Z EventRecordID 10827 Channel Application Computer Dans-8760w Security - EventData Photoshop.exe 15.1.0.148 53d97a8f atiocl64.dll 2.3.451.0 4cfd9adc c0000005 0000000000074fd0 1f40 01cfbcab67609480 C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe C:\Program Files (x86)\ATI Stream\bin\x86_64\atiocl64.dll a97d921d-289e-11e4-8e7d-e4115b508a14
Adobe: Thank you for the information.
Me: It's an AMD HD 6700 display
Adobe: It seems there is an issue with your Graphic Card Drivers.
Me: Well, yes
Me: But only with PS CC, so the problem is with PS
Me: I've updated the drivers
Me: This seems to be a common problem
Adobe: Please click on Start Button and type Device Manager and open Device Manager
Adobe: Once you have Device manager open, let me know
Me: Done
Adobe: Now please expand Display Adaptor option and right click on AMD HD 6700 and Select Properties
Me: OK
Adobe: Then click on Drivers Tab
Adobe: Click on Disable
Adobe: Click on Okay
Adobe: Once you click on Okay, it will change your Screen resolution
Me: You bet it did!
Adobe: Now please launch Photoshop CC 2014 and let me know if you are able to launch Photoshop CC 2014 or getting same error.
Me: Error not happening
Adobe: Are you able to launch Photoshop CC 2014?
Me: Yes
Adobe: It means, issue is with Graphic Card drivers.
Me: Yes, I knew that
Adobe: I suggest you to contact Graphic Card drivers and check if you can re-install the drivers and use Photoshop CC 2014 with the Graphic Card
Me: SO... PS CC 2014 is incompatible with the AMD drivers?
Me: I've installed 4 versions already. I'm running the latest beta now
Adobe: Could you please provide me with Full name of the Graphic Card?
Me: AFAIK, PS CC2014 is the only program that causes this error
Me: AMD Radeon HD 6700
Adobe: Dan, issue is due to the Drivers, which are not compatible with Photoshop CC 2014.
Adobe: You may be able to use other products, however if drivers is not compatible with Photoshop CC 2014, you will not be able to use them with Photoshop CC 2014
Me: I think that you have that backwards. PS CC2014 is not compatible with the drivers. It is the only known program to have this problem. Well documented.
Adobe: Please contact Graphic Card provider and check for the drivers or re-install drivers and check.
Me: I did, and they blame Adobe
Adobe: Okay
Adobe: Photoshop CC 2014 is not compatible with the drivers you have for the Graphic Card, there might be issue with drivers.
Adobe: We have checked with the error logs as well., it show Fault Module Name: atiocl64.dll
Me: Again, PS CC 2014 is the only known program to clash with atiocl64.dll
Adobe: I can suggest you to check if you can use the product from new Account and use the product or check with Graphic Card provider for the drivers or a proper installation for Graphic Drivers.
Me: Again, I've done all of that
Me: They blame Adobe, and frankly, they are correct. The problem only happens with your product
Adobe: Please use different Graphic Card on your computer and check if you can use it with Photoshop CC 2014.
Adobe: You can follow below link to know more about supported Graphic Cards.
Adobe: http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Me: Can we elevate this to the next level, please?
Adobe: We have disabled Graphic Card drivers to check if you can launch the product and you were able to launch the product without using the Graphic Drivers.
Me: Yes.
Me: So PS CC 2014 will not work with this card?
Adobe: Issue is with Graphic Card drivers, we can use Product with graphic Card
Me: So PS CC 2014 will not work with this card?
Adobe: Photoshop CC 2014 is compatible with AMD/ATI Radeon, 6000 series.
Adobe: However you have issue with Graphic card drivers.
Me: No, Adobe has an issue. And I have an issue with Adobe.
info: Your chat transcript will be sent to [email protected] at the end of your chat.
Me: And I'm not the first person to report it, either
<long pause>
Adobe: Please navigate to C:\Program Files\Adobe\Adobe Photoshop CC 2014
Adobe: Locate sniffer folder and rename it ~sniffer.
Adobe: *Locate sniffer file and rename it ~sniffer.
Adobe: Before that, please re-enable your Graphic Drivers as well.
Adobe: Once you done that, let me know.
Me: No such folder. sniffer.exe is present, however
Adobe: *Locate sniffer file and rename it ~sniffer.
Adobe: Please rename sniffer.exe to ~sniffer.exe
Me: Done
Adobe: Just to confirm, if you have re-enabled your Graphic Drivers?
Me: Yes
Adobe: Now please re-launch Photoshop CC 2014 and check if you can launch it or same error.
Me: No error. Program loads and runs.
Adobe: Please close and re-run the product and check,
Adobe: * I mean, close and re-launch
Me: No error. Program loads and runs.
Adobe: Okay
Adobe: Sniffer file is related to Graphic Processor from Photoshop CC 2014.
Adobe: You can keep it renamed and use the product.
Me: What does sniffer.exe do and can I run PS CC 2014 without it?
Adobe: You will be able to use the product without any issue.
Me: I'm sorry that I had to push you for a solution
Adobe: However I will suggest you to re-check with Graphic Provider and see if they have any drivers which you can use with Photoshop CC 2014, since issue is related to the Graphic Processor.
Me: As of yesterday, they did not
Adobe: I am sorry for the Inconvenience.
Adobe: Is there anything else I can help you with?
Me: No, thank you. Hopefully, the problem is resolved.
Adobe: You will be able to use the product, if any issue contact us back, we will check and help you accordingly
Adobe: You are most welcome.
Adobe: You may receive an email that will contain a link to complete an optional survey to provide your feedback on the support experience. Your feedback is very much appreciated.
Adobe: Thank you for contacting Adobe. Good Bye.

Terminal generates so extra lines every time I use a pipe ? Any Ideas ?

I am trying to extract my Public IP using bash, and have figured out several ways to do this, but I am having some unexpected lines in the result.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 105 100 105 0 0 195 0 --:--:-- --:--:-- --:--:-- 0
Anybody have any idea how to get rid of the extra lines ?
I recently re-installed the OS on my machine, and switched over to bash. Ever since then every time I issue a command that contains a pipe, I am getting some extraneous lines before the result.
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](09:56PM) -> [username] ~ $ curl http://checkip.dyndns.org/
<html><head><title>Current IP Check</title></head><body>Current IP Address: 45.xxx.46.204</body></html>
Comment : Need to get rid of everything except "45.xxx.46.204"
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](11:03PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | tr '' '\012' | grep '\.'
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 105 100 105 0 0 611 0 --:--:-- --:--:-- --:--:-- 0
45.xxx.46.204
Comment : OK. This returns the correct value but it inserted 3 additional lines prior to the result.
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](09:56PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | tr '<[:alpha:]:/>' ' '
" 45.xxx.46.204 "
Comment : This inserts replaces the unwanted characters with spaces, if I try to replace using '' the empty space, then "45.xxx.46.204" dissapears. It seems like a bug to me that you cannot replace a character with an empty value.
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](09:57PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | tr '<[:alpha:]:/>' ' ' | sed -e 's/ //g'
45.xxx.46.204
Comment : OK. But requires an extra step...
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](09:57PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | tr '<[:alpha:]:/>' ' ' | sed -e 's/ //g' > ~/Desktop/IP_Address.txt ; open ~/Desktop/IP_Address.txt
Comment : This works fine, sends the correct result to a file. The three extra lines remain with the terminal and do not go to the output file
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](11:21PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | sed -e 's/<[^>]*>//g'
Current IP CheckCurrent IP Address: 45.xxx.46.204
Comment : This uses sed instead of tr, but I still have to get rid of "Current IP CheckCurrent IP Address: "
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](11:22PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | sed -e 's/<[^>]*>//g' -e 's/[a-zA-Z :\r\n]*//g'
45.xxx.46.204
Comment : OK. This returns the correct value but it inserted 3 additional lines.
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](10:37PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | sed -e 's/<[^>]*>//g' -e 's/[a-zA-Z :\r\n]*//g' > ~/Desktop/IP_Address.txt ; open ~/Desktop/IP_Address.txt ;
Comment : This works fine, sends the correct result to a file.
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](10:43PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g'
45.xxx.46.204
Comment : OK. This appears to be the easiest way to do this...
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](10:44PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' > ~/Desktop/IP_Address.txt ; open ~/Desktop/IP_Address.txt ;
Comment :
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](11:41PM) -> [username] ~ $ ifconfig | grep broadcast
inet 192.168.1.102 netmask 0xffff0000 broadcast 192.168.255.255
inet 192.168.1.153 netmask 0xffffff00 broadcast 192.168.1.255
Comment : Now for the Private Addresses, and the netmask...
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](11:46PM) -> [username] ~ $ ifconfig | grep broadcast | awk '{print $2 }'
192.168.1.102
192.168.1.153
Comment : Now for the Private Addresses...
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](11:49PM) -> [username] ~ $ curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' ; ifconfig | grep broadcast | awk '{print $2 }'
45.xxx.46.204
192.168.1.102
192.168.1.153
Comment : Here are the Public & Private Addresses
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.14.05](11:50PM) -> [username] ~ $ \
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' ; \
ifconfig | grep broadcast | awk '{print $2 }'
45.xxx.46.204
192.168.1.102
192.168.1.153
Comment : This is a slightly different way to enter one command on each line
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.15.05](12:08AM) -> [username] ~ $ \
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' > ~/Desktop/IP_Address.txt ; \
ifconfig | grep broadcast | awk '{print $2 }' >> ~/Desktop/IP_Address.txt ; \
open ~/Desktop/IP_Address.txt ;
Comment : The Public & Private Addresses are sent to a file, and the file is opened
-- ---------+---------+---------+---------+---------+---------+---------+---------
[2007.15.05](12:08AM) -> [username] ~ $ \
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' \
~/Desktop/IP_Address.txt ; \
ifconfig | grep broadcast | awk '{print $2 }' \
~/Desktop/IP_Address.txt ; \
open ~/Desktop/IP_Address.txt ;
Comment : This is a slightly different way to view the commands
-- ---------+---------+---------+---------+---------+---------+---------+---------
#!/bin/bash
# ip.sh
testfile=/Applications/BBEdit.app/
if [ -d $testfile ] ;
then
# THE NEXT LINE GENERATES AN ERROR -> line 10: : command not found
echo ${testfile} exists!
fi
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' > ~/Desktop/IP_Address.txt
ifconfig | grep broadcast | awk '{print $2 }' >> ~/Desktop/IP_Address.txt
if [ -d /Applications/BBEdit.app ]; then
open -a /Applications/BBEdit.app ~/Desktop/IP_Address.txt
else
open ~/Desktop/IP_Address.txt
fi
-- ---------+---------+---------+---------+---------+---------+---------+---------
-- ---------+---------+---------+---------+---------+---------+---------+---------
SUMMARY : [PUBLIC & PRIVATE ADDRESS]
-- ---------+---------+---------+---------+---------+---------+---------+---------
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' ; ifconfig | grep broadcast | awk '{print $2 }'
-- ---------+---------+---------+---------+---------+---------+---------+---------
SUMMARY : [PUBLIC ADDRESS] THESE ALL WORK FINE
-- ---------+---------+---------+---------+---------+---------+---------+---------
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g'
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' > ~/Desktop/IP_Address.txt ; open ~/Desktop/IP_Address.txt ;
curl http://checkip.dyndns.org/ | sed -e 's/<[^>]*>//g' -e 's/[a-zA-Z :\r\n]*//g'
curl http://checkip.dyndns.org/ | sed -e 's/<[^>]*>//g' -e 's/[a-zA-Z :\r\n]*//g' > ~/Desktop/IP_Address.txt ; open ~/Desktop/IP_Address.txt ;
curl http://checkip.dyndns.org/ | tr '' '\n' | grep '\.'
curl http://checkip.dyndns.org/ | tr '' '\012' | grep '\.'
curl http://checkip.dyndns.org/ | tr '' '\012' | grep '\.' > ~/Desktop/IP_Address.txt ; open ~/Desktop/IP_Address.txt ;
curl http://checkip.dyndns.org/ | tr '<[:alpha:]:/>' ' ' | sed -e 's/ //g'
curl http://checkip.dyndns.org/ | tr '<[:alpha:]:/>' ' ' | sed -e 's/ //g' > ~/Desktop/IP_Address.txt ; open ~/Desktop/IP_Address.txt
-- ---------+---------+---------+---------+---------+---------+---------+---------
SUMMARY : [PRIVATE ADDRESS] THIS WORKS FINE
-- ---------+---------+---------+---------+---------+---------+---------+---------
ifconfig | grep broadcast | awk '{print $2 }'
-- ---------+---------+---------+---------+---------+---------+---------+---------
SUMMARY : [PUBLIC & PRIVATE ADDRESS] THESE WORK FINE
-- ---------+---------+---------+---------+---------+---------+---------+---------
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' ; ifconfig | grep broadcast | awk '{print $2 }'
COPY CONTENT BETWEEN THE DASHED LINES AND PASTE IN THE TERMINAL
curl http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' \
~/Desktop/IP_Address.txt ; \
ifconfig | grep broadcast | awk '{print $2 }' \
~/Desktop/IP_Address.txt ; \
open ~/Desktop/IP_Address.txt ;
PROBLEM : I HAVE NO CLUE HOW TO GET RID OF THE THREE LINES:
They were displayed by the terminal everytime I used a pipe, but I removed them for the sake of clarity
Best Regards,
Bill Hernandez
Plano, Texas

Thank You Very Much for enlightening me to the "-s" flag, that solved the problem...
[2007.15.05](06:16PM) -> [username] ~ $ curl -s http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g'
45.xxx.46.204
( 1 ) Sure enough I was missing the "-s" flag, I kept thinking it was something to do with the pipes because if I just entered
[2007.15.05](06:21PM) -> [username] ~ $ curl http://checkip.dyndns.org
<html><head><title>Current IP Check</title></head><body>Current IP Address: 45.xxx.46.204</body></html>
( 2 ) It did not add the extra lines. They only appeared when I added a pipe. How bizarre...
( 3 ) Once I looked at the man pages the "-s" became more obvious. It is still odd...
[2007.15.05](06:21PM) -> [username] ~ $ man curl
-s/--silent
Silent mode. Don't show progress meter or error messages. Makes Curl mute.
If this option is used twice, the second will again disable mute.
THIS SOLVES THE PROBLEM :
[2007.15.05](06:21PM) -> [username] ~ $ \
curl -s http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' ; ifconfig | grep broadcast | awk '{print $2 }'
ANYWAY HERE'S THE FINAL SCRIPT...
-- ---------+---------+---------+---------+---------+---------+---------+---------
#!/bin/bash
# ScriptName : myip
# Author : Bill Hernandez
# Location : Plano, Texas
# Modified : Tuesday, May 15, 2007 (6:32 PM)
curl -s http://checkip.dyndns.org/ | sed -e 's/[^0-9\.]*//g' > ~/Desktop/IP_Address.txt
ifconfig | grep broadcast | awk '{print $2 }' >> ~/Desktop/IP_Address.txt
if [ -d /Applications/BBEdit.app ]; then
open -a /Applications/BBEdit.app ~/Desktop/IP_Address.txt
else
open ~/Desktop/IP_Address.txt
fi
-- ---------+---------+---------+---------+---------+---------+---------+---------
Best Regards,
Bill Hernandez
Plano, texas

Any ideas how come javac...?

Operating System: Windows XP Professional
Java Applications: j2sdk1.4.2_03 (Downloaded in drive D:)
javac.exe: (Checked and confirmed it's in j2sdk1.4.2_03\bin)
Path appended: ;D:\j2sdk1.4.2_03\bin (in System Properties | Advanced | Environment Variables | System Variable | Path)
Source file: JavaPractice1.java (Saved in D:\Yeng)
Tried to compile at D:\> by typing: javac JavaPractice1.java
Tried to compile at D:\Yeng> by typing: javac JavaPractice1.java
Both gave me the same error message: 'javac' is not recognized as an internal or external command, operable program or batch file.
BUT when I tried to compile at D:\Yeng> by typing: D:\j2sdk1.4.2_03\bin\javac JavaPractice1.java
IT WORKS!
Any ideas why the full path name has to be entered in order for it to compile? Why when I typed: javac JavaPractice1.java at D:\Yeng> it can't compile even when I had appended ;D:\j2sdk1.4.2_03\bin at Path in the System Variable?
Appreciate it very much if someone helps me in this!

The error "'javac' is not recognized as an internal or external command, operable program or batch file." comes from the Windows command prompt. It means the command prompt program can not find javac.
If it works when typing D:\j2sdk1.4.2_03\bin\javac JavaPractice1.java but does not work when typing javac JavaPractice1.java your Path setting must not be right, even though the Path you posted looks right. Make sure there are no spaces in the Path setting. Try rebooting.

HT201210 Error message (0xE8000065) any ideas?

I am getting an message when I try to up-date and restore (0XE8000065).
Any ideas before I throw it in the bin???

Have you looked here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

I had my 4S activated at the store, but when I got home to sync up my phone and get all of my contacts, nothing is happening. I backed up my 3GS before switching phones, so it's all on my computer. Any ideas?

I had my 4S activated at the store, but when I got home to sync up my phone and get all of my contacts, nothing is happening. I backed up my 3GS before switching phones, so it's all on my computer. Any ideas?

Launch iTunes. From the menu bar click Store / View My Account
Click: Edit Payment Information
Make sure you have the correct Security Code.
Then click: Done
And try resetting your Apple ID password. https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa

Any idea about how to use EclipceMe

Im a new in J2Me environments and I'm using EclipceME as an IDE for it
im able to debug n run the programme in the mobile emulator but the problems is if there is an error it is just tell u that there i an error but does not tell where is the error or in which line
if somone tell me how to use the eclipseME to develop a mobile program or if there is any other IDE which has better feature

Hi,
Follow the following links to find what u need (Eclipse IDE):
- [http://bin.adawy.googlepages.com/DevelopingJ2MEapplicationswithEclips.pdf]
- [http://eclipseme.org/docs/|http://eclipseme.org/docs/]
Better and powerfull IDE : Netbeans
- [http://www.netbeans.org/kb/trails/mobility.html|http://www.netbeans.org/kb/trails/mobility.html]

Any idea on BIN$r7e6OHuSTbWWGQBa3KvfIQ==$0?

Similar Messages

Maybe you are looking for