Any idea why i get constant "sim failure" messages and a shutdown?

I am getting constant Sim Failure messages during itube video playing, resulting in shutdowns. Any ideas why and a solution?

Brett,
Well done getting the wireless network secured.
You have to precede the (hex) password with a '$' in Mac OS, to tell the Internet Connect dialog box that you are keying a hex password (rather than ASCII). This is because the Mac has detected that the network is WEP protected, and leaves it to you to decide how you want to key the password.
As an alternative, in Internet Connect (or from the AirPort icon menu), you can elect to join an "Other" network. If you select your network again, it'll come up with "WEP Password" as the option of Wireless Security. You can change this to "WEP 40/128-bit hex" and then not have to precede your password with the '$'.
Alternatively, you could tell us the make and model of your wireless router and we can tell you how to set, and use an ASCII password. From your 10-character hex password, we can see that you're using 40/64-bit WEP. Non-Apple routers can be a bit fussy when using ASCII passwords with 40-bit WEP (don't worry, this is also true for Windows PC's using 40-bit WEP too), but we can talk you through it.
As a final alternative, as you have such a whizzy Mac, as long as your wireless router supports it, you could use WPA security, and never have to worry about ASCII / hex / '$', etc. Older Macs (particularly original AirPort cards - not AirPort Extreme - and OS9) were limited to 40-bit WEP.

Similar Messages

  • On my new iPhone 4S, I periodically get a "Sim failure" message and I loose my Verizon connection. To get service back I need to shut down the phone and start it up again.

    On my new iPhone 4s, I periodically get a "Sim failure" message and I loose my Verizon connection. To get service back, I need to shut down my phone and restart it.

    Have you tried removing and replacing the SIM? If that doesn't work, try a new SIM from Verizon, they will usually swap them out for you for free. If those don't work, you might need to get the phone checked out, it may have a bad SIM port.

  • When I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both fin

    when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
    == This happened ==
    Every time Firefox opened
    == this morning 22/07/10

    Lyall,
    I have seen this before, a long time ago (several years), and I cannot
    remember how/if we resolved it.
    If this is an impotant issue to you, I suggest that you open a case with
    BEA support.
    Regards,
    Peter.
    Got a Question? Ask BEA at http://askbea.bea.com
    The views expressed in this posting are solely those of the author, and BEA
    Systems, Inc. does not endorse any of these views.
    BEA Systems, Inc. is not responsible for the accuracy or completeness of
    the
    information provided
    and assumes no duty to correct, expand upon, delete or update any of the
    information contained in this posting.
    Lyall Pearce wrote:
    The title says it all really.
    I see other posts getting replies.
    This is a rather important issue, I have seen another post with a similar problem.
    While not being a show-stopper it certainly raises concerns.
    The application works ok until the application exits (in both development and
    executable form)
    Apparently this did not happen with Tux 7.1
    It does with 8, I do not have 7.1 so I have no workaround.
    ..Lyall

  • Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?

    MacBook Pro 2009
    Model Identifier: MacBookPro5,1
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Software  OS X 10.8.5 (12F45)
    Iphoto '11
    Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
    "Your photo library is either in use by another application or has become unreadable"
    Offered solution doesn't work:
    Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
    I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
    I can't download photographs from my iphone or my digital camera.
    Any ideas on how I can solve this problem?
    There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
    Many thanks,
    Ed

    I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
    You can't "copy" your photos to the "library manager", there is just no way to any such thing.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can't be burned because an unexpected error occurred (error code 0x80020000)

    I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can’t be burned because an unexpected error occurred (error code 0x80020000)
    I did burn the same way in MAC OS X 10.6.8. with no troubles!
    Can anyone please help me out?
    I use for years DVD-R of TDK 4.7GB 16X.

    Hey topo27,
    I would try out the following and see if it helps:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Welcome to Apple Support Communities!
    Cheers,
    Delgadoh

  • I'm getting a SIM Failure message then I lose service

    On my 3 month old Verizon 16GB iPhone 4S I am getting a message saying SIM failure then I lose service. I only regain service after I turn the phone off and on. This seems to be happening randomly. Can anyone please help me????

    Complimentary telephone support for any and everything has expired, but if you have a valid problem that cannot be resolved by any other means, AppleCare will not charge you since the iPhone includes a one year warranty. They will ask for a credit card in advance, but after they confirm you have a valid problem that may require an exchange under warranty, you will not be charged.
    Did Verizon have you try anything, or they just told you to call AppleCare?

  • HT4994 If I get a "SIM Failure" message what should I do?

    What should I do when I see the message "SIM Failure" on my 4S IPhone?  Do I contact Apple or my carrier?

    try the carrier first
    you may have a bad sim and apple does not have them

  • I get constant "Not Responding" messages and Thunderbird freezes. I've done everything suggested on this forum. Nothing helps.

    I've done everything I can find in this forum - using Safe mode, changing McAfee settings, etc., etc., etc. I downloaded Thunderbird again and reinstalled it. Nothing helps. I can look at one email but if I try to delete it I get the "Not responding" message. If I try to go to the next message I get the "not responding" message. If I try to do anything while the screen is frozen, it goes grey and I get the "not responding" message. Short of changing my email viewer, is there anyway I can fix it.

    I have this problem too and it is EXTREMELY frustrating!!!

  • Any idea why i get this panic message and have to shut down?

    Interval Since Last Panic Report:  371517 sec
    Panics Since Last Report:          7
    Anonymous UUID:                    C15F8CC1-AD3D-4B74-B527-EE4BC559D8DB
    Wed Jun 20 14:03:19 2012
    panic(cpu 0 caller 0x226ec0): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.15.3/osfmk/kern/sched_prim.c:1471
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x35eb3d38 : 0x21b837 (0x5dd7fc 0x35eb3d6c 0x223ce1 0x0)
    0x35eb3d88 : 0x226ec0 (0x593ab8 0xffffffff 0x593a50 0x226790)
    0x35eb3e08 : 0x2275c6 (0x55b67c4 0x55b67c4 0x35eb3e68 0x233203)
    0x35eb3e78 : 0x227654 (0x0 0x0 0x0 0x0)
    0x35eb3e98 : 0x221d42 (0x0 0x0 0x0 0x322384)
    0x35eb3eb8 : 0x490daa (0x5249170 0x0 0x54ea194 0x0)
    0x35eb3f28 : 0x49149d (0x0 0x0 0x0 0x5249170)
    0x35eb3f68 : 0x32255c (0x54ea194 0x5249170 0x0 0x54ea1ac)
    0x35eb3fc8 : 0x2a179c (0x54ea184 0x0 0x2a17ab 0x4b87124)
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacBookAir1,1 (Mac-F42C8CC8)
    System uptime in nanoseconds: 543706395621
    unloaded kexts:
    com.apple.iokit.IOAHCIFamily    2.0.6 (addr 0xd68000, size 0x24576) - last unloaded 115654996660
    loaded kexts:
    com.cisco.nke.ipsec    2.0.1
    com.apple.filesystems.smbfs    1.6.7 - last loaded 45582341552
    com.apple.filesystems.msdosfs    1.6.3
    com.apple.filesystems.autofs    2.1.0
    com.apple.driver.ApplePlatformEnabler    2.0.2d1
    com.apple.driver.AppleHDA    2.0.5f14
    com.apple.driver.AudioAUUC    1.57
    com.apple.driver.IOBluetoothBNEPDriver    2.4.5f3
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.1.6
    com.apple.driver.AppleHWSensor    1.9.3d0
    com.apple.driver.SMCMotionSensor    3.0.1d2
    com.apple.driver.AppleUpstreamUserClient    3.5.7
    com.apple.driver.AppleMCCSControl    1.0.20
    com.apple.driver.AppleIntelMeromProfile    19
    com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0a1
    com.apple.driver.AppleLPC    1.5.1
    com.apple.driver.AppleBacklight    170.0.46
    com.apple.kext.AppleSMCLMU    1.5.2d10
    com.apple.driver.AppleIntelGMAX3100    6.3.6
    com.apple.driver.AppleIntelGMAX3100FB    6.3.6
    com.apple.driver.AppleUSBTCButtons    201.6
    com.apple.driver.AppleUSBTCKeyboard    201.6
    com.apple.driver.AppleIRController    303.8
    com.apple.driver.AppleUSBEthernet    2.1.39
    com.apple.BootCache    31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.driver.AirPortBrcm43224    428.42.4
    com.apple.driver.AppleUSBHub    4.2.4
    com.apple.driver.AppleEFINVRAM    1.4.0
    com.apple.driver.AppleSmartBatteryManager    160.0.0
    com.apple.driver.AppleIntelPIIXATA    2.5.1
    com.apple.driver.AppleUSBEHCI    4.2.4
    com.apple.driver.AppleUSBUHCI    4.2.0
    com.apple.driver.AppleRTC    1.3.1
    com.apple.driver.AppleHPET    1.5
    com.apple.driver.AppleACPIButtons    1.3.6
    com.apple.driver.AppleSMBIOS    1.7
    com.apple.driver.AppleACPIEC    1.3.6
    com.apple.driver.AppleAPIC    1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient    142.6.0
    com.apple.security.sandbox    1
    com.apple.security.quarantine    0
    com.apple.nke.applicationfirewall    2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement    142.6.0
    com.apple.driver.DspFuncLib    2.0.5f14
    com.apple.driver.AppleProfileReadCounterAction    17
    com.apple.driver.AppleProfileTimestampAction    10
    com.apple.driver.AppleProfileThreadInfoAction    14
    com.apple.driver.AppleProfileRegisterStateAction    10
    com.apple.driver.AppleProfileKEventAction    10
    com.apple.driver.AppleProfileCallstackAction    20
    com.apple.iokit.IOSurface    74.2
    com.apple.iokit.IOBluetoothSerialManager    2.4.5f3
    com.apple.iokit.IOSerialFamily    10.0.3
    com.apple.iokit.IOAudioFamily    1.8.3fc2
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.driver.AppleHDAController    2.0.5f14
    com.apple.iokit.IOHDAFamily    2.0.5f14
    com.apple.iokit.AppleProfileFamily    41
    com.apple.driver.IOPlatformPluginFamily    4.7.0a1
    com.apple.driver.AppleBacklightExpert    1.0.1
    com.apple.iokit.IONDRVSupport    2.2.1
    com.apple.driver.AppleSMC    3.1.0d5
    com.apple.iokit.IOGraphicsFamily    2.2.1
    com.apple.driver.AppleUSBMultitouch    207.7
    com.apple.driver.BroadcomUSBBluetoothHCIController    2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController    2.4.5f3
    com.apple.iokit.IOBluetoothFamily    2.4.5f3
    com.apple.iokit.IOSCSIBlockCommandsDevice    2.6.8
    com.apple.iokit.IOUSBHIDDriver    4.2.0
    com.apple.iokit.IOUSBMassStorageClass    2.6.7
    com.apple.iokit.IOSCSIArchitectureModelFamily    2.6.8
    com.apple.driver.AppleUSBMergeNub    4.2.4
    com.apple.driver.AppleUSBComposite    3.9.0
    com.apple.driver.XsanFilter    402.1
    com.apple.iokit.IOATABlockStorage    2.6.0
    com.apple.iokit.IO80211Family    320.1
    com.apple.iokit.IONetworkingFamily    1.10
    com.apple.iokit.IOUSBUserClient    4.2.4
    com.apple.iokit.IOATAFamily    2.5.1
    com.apple.iokit.IOUSBFamily    4.2.4
    com.apple.driver.AppleEFIRuntime    1.4.0
    com.apple.iokit.IOHIDFamily    1.6.6
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    6
    com.apple.driver.DiskImages    289.1
    com.apple.iokit.IOStorageFamily    1.6.3
    com.apple.driver.AppleACPIPlatform    1.3.6
    com.apple.iokit.IOPCIFamily    2.6.5
    com.apple.iokit.IOACPIFamily    1.3.0
    Model: MacBookAir1,1, BootROM MBA11.00BB.B03, 2 processors, Intel Core 2 Duo, 1.8 GHz, 2 GB, SMC 1.23f20
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8B), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: USB Ethernet, Ethernet, en4
    Network Service: AirPort, AirPort, en0
    Parallel ATA Device: MCCOE64GEMPP, 55.9 GB
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8505, 0xfd400000 / 3
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0xfd100000 / 2
    USB Device: Apple USB Ethernet Adapter, 0x05ac  (Apple Inc.), 0x1402, 0xfd130000 / 7
    USB Device: Samsung G2 Portable, 0x04e8  (Samsung Electronics Co., Ltd.), 0x6033, 0xfd110000 / 6
    USB Device: Officejet 7200 series, 0x03f0  (Hewlett Packard), 0x4111, 0xfd140000 / 5
    USB Device: HP Wireless Comfort Desktop, 0x0461  (Primax Electronics), 0x4d5a, 0xfd120000 / 4
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d200000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8210, 0x1d210000 / 5
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0224, 0x5d200000 / 3
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x5d100000 / 2

    Uninstall the Cisco VPN client according to the developer's instructions and see whether there's any improvement. Use the built-in Cisco client instead, if possible.

  • Any ideas why Smart Zoom only working in Safari and not TextEdit, etc.

    I like using Smart Zoom, but it only works in Safari for me. Is anyone else experiencing this or have a suggestion for fixing this? I thought it was supposed to work in TextEdit and some other Apple programs.

    System Preferences > Universal Access > Seeing. Is Zoom turned on?
    Also look in System Preferences > Trackpad > Scroll & Zoom tab > uncheck Smart zoom
    Or System Preferences > Mouse  > Smart Zoom.
    EDIT: Just tested Text Edit and it won't respomd to a SZ

  • Any idea how to get rid of "text enhance" and "ad yield manager"?

    When I try to go to c\documents and settings to delet this cookie I am denied access. Norton can't see it. Spybot can't see it iether.

    Backing up an iPhone never takes 32GB of memory... it really should not take more than 1 or 2GB at the most.  NO media is included in the backup.
    Remove the incomplete backups if they are what is really taking up space.
    Where iTunes backups are stored on your computer
    The folder where your backup data are stored varies depending on the computer's operating system.   Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac:  ~/Library/Application Support/MobileSync/Backup/
    Windows XP:  \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista and Windows 7:  \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
    It also might be time to consider a larger hard drive or moving the media to an external drive.

  • If I create a new appointment in iCloud, I found it in my device, but with another time. Any idea why?

    If I create a new appointment in iCloud, I found it in my device, but with another time. Any idea why?

    Most likely because your iPhone and your iCloud account are set to two different time zones.
    In the iCloud web interface, click your account name at the top right.  This will pop up a window that lets you configure the time zone.  You may also need to enable or disable time zone support within the Calendar (Settings -> Preferences -> Advanced).
    On your iPhone, go to Settings -> Mail, Contacts, Calendars -> Time Zone Support.  Turn it off to let your iPhone automatically determine your time zone, or turn it on and select a time zone.

  • HT5538 I use iMessage on an iphone 5.1 but I cannot receive a text sent to my phone number. Any idea why?

    I use iMessage on an iphone 4s, iOS 5.1, and I receive iMessages from iMessage users but I cannot receive a text sent to my phone number from non-iMessage users. Any idea why?

    SMS activated in Settings > Messages? Jailbroken?

  • Sometimes after putting my iMac to sleep, I can't get it to wake up and have to turn it off at the mains. Any ideas why?

    Sometimes after putting my iMac to sleep, I cannot get it to wake up again. It's as if it's shut down and I have to turn it off at the mains and restart it.  Any ideas why? Does this keep happening to anybody else?

    That message means that you have to restore the iPad now. Something went wrong. You need to restore the iOS software and then restore from the backup.
    Read this carefully and follow the instructions. Make sure that you restore from your backup at the end of the process. That is covered at the bottom of the support article.
    http://support.apple.com/kb/HT1414

  • When quitting safari I used to get a dialogue box with checkboxes, useful if I accidentally pressed command q, but now option seems to have disappeared. Any ideas why or how to retrieve it please?

    I used to get a dialogue box when quitting safari, which was useful if accidentally hitting 'command q', but has now disappeared leading to lost work etc.
    Any idea why, or how I can get this useful option back please?

    Now resolved, after chatting to Apple online support, who said they'd not heard of this happening - solved it quickly enough though.
    Anyone interested or suffering similar I was told to remove website data from privacy tab in Safari preferences. And yes, I'd love to know how it worked too.....
    Great thanks to Apple.

Maybe you are looking for

  • IBASE assingmnet block with Full Width.

    Hello Experts, I have come across IBASE hierarchy assignment block alinged on the left side of the page of WEB-UI. But if i need to bring it to full width on top of the page rather than alinged on left side of page, from where can i control it ? Do w

  • Exam 1Z0-007: From where to start?

    Dear All! I am new to oracle. I know a little bit about SQL ( Its basic syntax). Now I want to move on to the certification track.( OCA => OCP ). There first, I will have to pass the exam 1Z0-007 ( If I am not mistaken). I want to prepare myself for

  • To update PO version using BDC

    Hi we have created a BDC for creating PO with reference to PR. we have a requirement for extending this BDC to  a new plant. In their master settings they have configured version management for PO in which requestor is mandatory. I am unable to recor

  • Exporting vs. printing to postscript printer

    I guess I am old school, since I have been using Distiller for 13+ years. What do most designers do now?

  • New to Imac - how do you view the clipboard?

    How do I see the clipboard and have it open?