Any idea why I receive this error msg?

     I am only attempting to download my Camera Roll to my Mac for further editing and have been unable to due to these errors!
1. "Photos folder syncing has been disabled for the iPhone “John's iPhone” because the folder “Camera Uploads” cannot be found.
2. "iTunes cannot Sync photos to the iPhone because the folder "Camera Uploads" cannot be found".
     The above error msgs appear when attempting to sync via the iTunes app! So I tried to download my photos via Image Capture app and it shows that the
iPhone has "No Photos"? Next I trie via iPhoto with same results, "No Photos"?
     Of course all this has happened since the install of IOS 7 yesterday, so that may be a hint! Any suggestions would be appreciated, as always!

Uninstall the Cisco VPN client according to the developer's instructions and see whether there's any improvement. Use the built-in Cisco client instead, if possible.

Similar Messages

I received this error msg when I wants to sync my 3gs iphone. Please help. "This Iphone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."

I received this errir msg when I wants to sync my 3gs iPhone. And I already update my iTunes to 64-bit. "This iPhone cannot be used because the required software is not installed.Run the iTunes installer to remove iTunes, then install the 64-bit version itunes".

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Unable to open a new window you must first close exsisting firefox process or restart your system. There is no firefox process running why should I receive this error msg?

I closed a Firefox process. Then clicked the FF icon to restart my browser. I received an error message. " Firefox is already running, but not responding. To open a new window you must first close existing Firefox process, or restart your system. However there is no Firefox process running to begin with. I checked the task manager.
== This happened ==
Every time Firefox opened

It takes Firefox 5-15 seconds to completely close and for the OS to release the processes; it may take longer if you have a Flash animation/video running in one of the tabs. If not waiting long enough is not the problem, you can try the following to determine if an Extension or Plugin might be causing Firefox to hang at exit.
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

Any idea as to what this error message in particular means?

I've kept getting this error message below for 2 days in a row now. None of the tips i've found on his forum have helped. Sure, i publish to a webhost now, but would still like to know what's wrong. I might want to go back to having .Mac host my site as the RSS feed doesn't seem to work any longer even though i did enter my domain name when publishing to a folder.
"An error occurred while publishing file “/Web/.Temporary Web Resources/DDB09747-9E94-4116-907E-41BEB86B3868”. Try publishing again later."
Any ideas?

Just wanted to let you guys know that this issue of mine has been fixed with the latest update
MIght go back to .Mac as the RSS feed button doesn't work.

Any idea why super() and this() needs to be first statement

Java recommends super() and this() to be the first statement to be used.why this design constraint is imposed?
This imposes one more restriction
where super() and this() cannot be used at the same time?
how this constraint is useful.
for eg:
class A
     A(int a)
     System.out.println("A(int)");
     A(int a,int b)
     System.out.println("A(int,int)");
class B extends A
     B()
          super(1);
          System.out.println("B()");
     B(int i)
          this();
          super(1,1);//compile-error :must be first statement
the above eg may be a bad design,but are the constraints imposed for this purpose?or anything else?

To make sure that the constructor is the first thing that runs, and to make sure >the super instance is completely constructed before we do anything with the >child instance.
Both these go toward having the object be in a consistent, valid state.I accept the point,but considering the code part
B()
   //super(1);
System.out.println("B()");
B(int i)
super(1,1);
this();
}in above super instance will be constructed first followed by this().
but this() cannot be used as second statement???
I feel ,this is because this() in turn calls the super constructor again?to restrict this constraint made?is it something like that?

Any idea why i get this panic message and have to shut down?

Interval Since Last Panic Report: 371517 sec
Panics Since Last Report:          7
Anonymous UUID:                    C15F8CC1-AD3D-4B74-B527-EE4BC559D8DB
Wed Jun 20 14:03:19 2012
panic(cpu 0 caller 0x226ec0): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.15.3/osfmk/kern/sched_prim.c:1471
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x35eb3d38 : 0x21b837 (0x5dd7fc 0x35eb3d6c 0x223ce1 0x0)
0x35eb3d88 : 0x226ec0 (0x593ab8 0xffffffff 0x593a50 0x226790)
0x35eb3e08 : 0x2275c6 (0x55b67c4 0x55b67c4 0x35eb3e68 0x233203)
0x35eb3e78 : 0x227654 (0x0 0x0 0x0 0x0)
0x35eb3e98 : 0x221d42 (0x0 0x0 0x0 0x322384)
0x35eb3eb8 : 0x490daa (0x5249170 0x0 0x54ea194 0x0)
0x35eb3f28 : 0x49149d (0x0 0x0 0x0 0x5249170)
0x35eb3f68 : 0x32255c (0x54ea194 0x5249170 0x0 0x54ea1ac)
0x35eb3fc8 : 0x2a179c (0x54ea184 0x0 0x2a17ab 0x4b87124)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookAir1,1 (Mac-F42C8CC8)
System uptime in nanoseconds: 543706395621
unloaded kexts:
com.apple.iokit.IOAHCIFamily    2.0.6 (addr 0xd68000, size 0x24576) - last unloaded 115654996660
loaded kexts:
com.cisco.nke.ipsec    2.0.1
com.apple.filesystems.smbfs    1.6.7 - last loaded 45582341552
com.apple.filesystems.msdosfs    1.6.3
com.apple.filesystems.autofs    2.1.0
com.apple.driver.ApplePlatformEnabler    2.0.2d1
com.apple.driver.AppleHDA    2.0.5f14
com.apple.driver.AudioAUUC    1.57
com.apple.driver.IOBluetoothBNEPDriver    2.4.5f3
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.1.6
com.apple.driver.AppleHWSensor    1.9.3d0
com.apple.driver.SMCMotionSensor    3.0.1d2
com.apple.driver.AppleUpstreamUserClient    3.5.7
com.apple.driver.AppleMCCSControl    1.0.20
com.apple.driver.AppleIntelMeromProfile    19
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0a1
com.apple.driver.AppleLPC    1.5.1
com.apple.driver.AppleBacklight    170.0.46
com.apple.kext.AppleSMCLMU    1.5.2d10
com.apple.driver.AppleIntelGMAX3100    6.3.6
com.apple.driver.AppleIntelGMAX3100FB    6.3.6
com.apple.driver.AppleUSBTCButtons    201.6
com.apple.driver.AppleUSBTCKeyboard    201.6
com.apple.driver.AppleIRController    303.8
com.apple.driver.AppleUSBEthernet    2.1.39
com.apple.BootCache    31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.driver.AirPortBrcm43224    428.42.4
com.apple.driver.AppleUSBHub    4.2.4
com.apple.driver.AppleEFINVRAM    1.4.0
com.apple.driver.AppleSmartBatteryManager    160.0.0
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AppleUSBEHCI    4.2.4
com.apple.driver.AppleUSBUHCI    4.2.0
com.apple.driver.AppleRTC    1.3.1
com.apple.driver.AppleHPET    1.5
com.apple.driver.AppleACPIButtons    1.3.6
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.3.6
com.apple.driver.AppleAPIC    1.4
com.apple.driver.AppleIntelCPUPowerManagementClient    142.6.0
com.apple.security.sandbox    1
com.apple.security.quarantine    0
com.apple.nke.applicationfirewall    2.1.14
com.apple.driver.AppleIntelCPUPowerManagement    142.6.0
com.apple.driver.DspFuncLib    2.0.5f14
com.apple.driver.AppleProfileReadCounterAction    17
com.apple.driver.AppleProfileTimestampAction    10
com.apple.driver.AppleProfileThreadInfoAction    14
com.apple.driver.AppleProfileRegisterStateAction    10
com.apple.driver.AppleProfileKEventAction    10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface    74.2
com.apple.iokit.IOBluetoothSerialManager    2.4.5f3
com.apple.iokit.IOSerialFamily    10.0.3
com.apple.iokit.IOAudioFamily    1.8.3fc2
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.0.5f14
com.apple.iokit.IOHDAFamily    2.0.5f14
com.apple.iokit.AppleProfileFamily    41
com.apple.driver.IOPlatformPluginFamily    4.7.0a1
com.apple.driver.AppleBacklightExpert    1.0.1
com.apple.iokit.IONDRVSupport    2.2.1
com.apple.driver.AppleSMC    3.1.0d5
com.apple.iokit.IOGraphicsFamily    2.2.1
com.apple.driver.AppleUSBMultitouch    207.7
com.apple.driver.BroadcomUSBBluetoothHCIController    2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController    2.4.5f3
com.apple.iokit.IOBluetoothFamily    2.4.5f3
com.apple.iokit.IOSCSIBlockCommandsDevice    2.6.8
com.apple.iokit.IOUSBHIDDriver    4.2.0
com.apple.iokit.IOUSBMassStorageClass    2.6.7
com.apple.iokit.IOSCSIArchitectureModelFamily    2.6.8
com.apple.driver.AppleUSBMergeNub    4.2.4
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.driver.XsanFilter    402.1
com.apple.iokit.IOATABlockStorage    2.6.0
com.apple.iokit.IO80211Family    320.1
com.apple.iokit.IONetworkingFamily    1.10
com.apple.iokit.IOUSBUserClient    4.2.4
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IOUSBFamily    4.2.4
com.apple.driver.AppleEFIRuntime    1.4.0
com.apple.iokit.IOHIDFamily    1.6.6
com.apple.iokit.IOSMBusFamily    1.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    6
com.apple.driver.DiskImages    289.1
com.apple.iokit.IOStorageFamily    1.6.3
com.apple.driver.AppleACPIPlatform    1.3.6
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
Model: MacBookAir1,1, BootROM MBA11.00BB.B03, 2 processors, Intel Core 2 Duo, 1.8 GHz, 2 GB, SMC 1.23f20
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8B), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: USB Ethernet, Ethernet, en4
Network Service: AirPort, AirPort, en0
Parallel ATA Device: MCCOE64GEMPP, 55.9 GB
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8505, 0xfd400000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd100000 / 2
USB Device: Apple USB Ethernet Adapter, 0x05ac (Apple Inc.), 0x1402, 0xfd130000 / 7
USB Device: Samsung G2 Portable, 0x04e8 (Samsung Electronics Co., Ltd.), 0x6033, 0xfd110000 / 6
USB Device: Officejet 7200 series, 0x03f0 (Hewlett Packard), 0x4111, 0xfd140000 / 5
USB Device: HP Wireless Comfort Desktop, 0x0461 (Primax Electronics), 0x4d5a, 0xfd120000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8210, 0x1d210000 / 5
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0224, 0x5d200000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000 / 2

Uninstall the Cisco VPN client according to the developer's instructions and see whether there's any improvement. Use the built-in Cisco client instead, if possible.

Airport express error -15000. Any ideas on what causes this error?

I keep getting airport express error -15000 when I try to play a song from itunes to speakers set up throught the airport express.

Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes
http://support.apple.com/kb/TS2278

Anyone have any idea why there is an "error" when trying to activate iMessage? It randomly turned itself off and wont go back on.

This just happened yesterday

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I download OSX mountain Lion and my mac is very slow.Any idea why?

After downloading mountain lion my mac gets slow...any idea why?

Try this:
Boot into Safe Mode then reboot normally. Do the following:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Does this help? If not, then you should reinstall Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Sometimes after putting my iMac to sleep, I can't get it to wake up and have to turn it off at the mains. Any ideas why?

Sometimes after putting my iMac to sleep, I cannot get it to wake up again. It's as if it's shut down and I have to turn it off at the mains and restart it. Any ideas why? Does this keep happening to anybody else?

That message means that you have to restore the iPad now. Something went wrong. You need to restore the iOS software and then restore from the backup.
Read this carefully and follow the instructions. Make sure that you restore from your backup at the end of the process. That is covered at the bottom of the support article.
http://support.apple.com/kb/HT1414

My ipad was taking really clear photos but now they are blurry and grainy. Any ideas why?

My ipad was taking really clear photos but now they are blurry and grainy. Any ideas why?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?

MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
Ed

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

When trying to view youtube I get this message"an error occured loading this content" any ideas why?

When I try to view YouTube content I get the message "an error occured loading this content." This did not happen until recently. Any ideas why?

Hi,
I'm facing the same issue.. Just updated the software a few days back and I started getting this error... logged into youtube can view the playlists, subscriptions etc but when I try playing any video or Rent a movie etc...the message kept popping up... "Error Loading Content, Try again later"....
Arrrgggh.....
Can someone help us with this...

HT203128 "Unable to check for available downloads. The network connection was lost." I have 3 downloads from yesterday that I receive this error code. Any ideas?

I have 3 downloads from yesterday that I receive this error code. Any ideas?
Thank you!

I may have stumbled upon something that could help. A type of "detour" around the problem.
I just started experiencing this problem a few days ago. Anytime I'd try to download a song/video/movie, I would get the message, "Unable to check for available downloads. The network connection was reset".
So, instead of selecting "Check for Available Downloads" under "Advanced" menu...
I logged into "My Account" page in itunes. If there are available downloads it comes up at the top of the page with the option button "Download Now". When I select that -- it downloads immediately.
Can't promise it will work every time. But it's worked for me so far. Good luck...

I tried to install up date 3.6.13 and received error message that I didn't have the right permissions on this mac book , but I am the administrator on my Mac Book Air? Any ideas how to resolve this?

I tried to install up date 3.6.13 and received error message that I didn't have the system permissions required to install it. I am the administrator on my Mac Book Air? Any ideas how to resolve this?

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Any idea why I receive this error msg?

Similar Messages

Maybe you are looking for