Any ideas about n82 firmware update?

hey there, I heard there was a looming update for the n82 which should include flash lite3 and geotagging, does anyone have an idea about when it will be out? I heard March... which is over...

Although when the black variant is released, it will have a newer firmware.
That's right people, I'm back. Where have I been? I have been getting a life, away from this electric madness.

Similar Messages

  • Mifi 4510L Mifi Hotspot...is it the network? and what about the firmware update?

    I have spent several months trying to seek a solution on the repeated and frequent disconnects from the Verizon wireless network using my Mifi 4510 L.  No success.  I have conversed with Verizon Wireless "experts" on this matter and have basically been ignored, since they do not have a solution. It has cost me a pretty penny in wireless costs due to lost connections in downloads, etc...for which I do not get any credit from Verizon on my wireless bill...go figure.
    I have even been accused by Verizon that the problem is my computer and hardware, even though I have ran several hardware, software, and "real-life" connection checks on other wireless networks with no issues at all.  I even have been getting better connectivity when I use my Verizon USB UML290...but I hate having to switch moving my SIM card from the USB Modem to the MIfi4510L...one of these days the SIM card will fail. Verizon has checked the signal strength at my home and work locations (which I already knew as good), but never heard back from them.
    Anyway,  I have verified that my wireless network adapter works just fine on other wireless networks (no dropouts, etc).  I have even upgraded to another Windows Operating System - Windows 7...which is more superior than Vista in dealing with wireless communications.  I have implemented quite a number of the solutions provided by other great Verizon Wireless Community members, but the connectivity problems continue to occur.
    When I did a review of my wireless hardware logs, I noticed that when I was encountering problems, the dynamically assigned address given to me on the Verizon Wireless network changed quite a bit, even when I was using the same web site. When my wireless connection worked fine, the dynamically assigned address was consistent.  This seemed to change when I encounter peak network load times. 
    I would appreciate a straight answer from Verizon Wireless on what is going on with the network.  I live in a solid 3G coverage area...but just far away from 4G to benefit for the increased throughput.  The closest 4G location footprint is about 40 miles away from me.
    Finally, what about the Mifi 4510 L firmware update?  I have yet to see any notification about this firmware update, either through normal e-mail channels or even through my Mifi configuration site
    http://192.168.1.1/mifi.cgi
    What gives?
    I realize that I am sounding a little perturbed about this matter, but it has been almost 4 months now...and Verizon is not living up to their part of the bargain on providing good tech support on the Mifi 4510L.  When they do not have an answer...they ignore the customer.   Not good business!!!
    Kevin Smith
    Metropolis, IL

    kescom11 wrote:
    Finally, what about the Mifi 4510 L firmware update?  I have yet to see any notification about this firmware update, either through normal e-mail channels or even through my Mifi configuration site 
    The firmware update was released a few weeks ago and there were multiple threads in this forum for it:
    Software Update: Verizon Wireless 4G LTE Mobile Hotspot MiFi™ 4510L
    The firmware update primarily addresses a problem with the MiFi switching from 3G to 4G and back.  I would not expect it to resolve a connection issue for anyone in a 3G only area.  Work through the firmware update instructions included in the link above and see if it helps. 
    There were no email notifications but the MiFi should have been redirecting you to the MiFi homepage every time you tried to browse the internet.  The firmware update is mandatory so if you have not already completed the update then there might be something wrong with your device. 

  • I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • After updating to Maverick, Photoshop cs6 is freezing up repetitively. The "initializing text tool" progress bar seems to be popping up out of nowhere. Does anybody have any ideas about why this is happening?

    After updating to Maverick, Photoshop cs6 is freezing up repetitively. Does anybody have any ideas about why this is happening?

    After updating to Maverick, Photoshop cs6 is freezing up repetitively. Does anybody have any ideas about why this is happening?

  • HT1386 Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

    Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

    What are you trying to sync?
    I see you are on ios 7.
    I also had upgraded my iPad Mini to ios 7 & then the 1st time I tried to open a Numbers file that was set up to sync w my MacBookPro, I got a warning that I would not be able to sync it any more w my Mac until I upgraded to Mavericks.
    So if you are trying to sync Numbers, Pages or Keynote files between your iPad mini in ios 7 and a Mac that hasn't been upgraded to Mavericks that could be the problem.
    I was very shocked to get that message since I bought Numbers on the iPad so that I could have a particular file on both devices & keep them synced. I had no clue when I upgraded to ios 7 on the iPad Mini that it would make it so the files in the iWorks apps woudln't sync any more.
    So I finally decided to go ahead & upgrade to Mavericks after carefully preparing & updating other software so that it would work w Mavericks. But I got error messages so haven't even been able to download Mavericks & now having 2nd thoughts about doing so.
    iPad mini ios 7
    MacBookPro Mid 2012 Mountain Lion
    iphone 4S ios 6

  • Any Ideas about 1.2 fix? (Scrambled Screen, etc.)

    Anyone have any ideas about how to fix the problems with ipod software 1.2? Does anyone know how to fix the scrambled screen problem or the locking up of the screen, after two months of having to deal with the problem) (iPod software version 1.2 was released on September 12) (other than reverting back to 1.1.2)
    ...yeah, i didn't think so.

    yeah, many of us would like apple to fix this problem. I've stopped buying tv shows off the iTunes store, because I can't get the videos on my iPod without the update. Feh!

  • Problem about SMC Firmware Update 1.7

    So I was browing and suddenly a notification pops up about OSX update. It was about SMC Firmware Update 1.7
    I am using a MBP 15" Late 2011. ( OSX Version 10.8.2 )
    I did clicked update and it asked me to restart. But instead of a restart it automatically logged out. So I logged in and clicked Update and then when it asked me for restart it clicked restart. So now it showed me a Grey screen, the cursor was still there. The cursor was still moving. So I though now this is getting updated but it didn't showed any window of Software update for 20 mins. I assumed it was downloading the update.
    The update is just 1 MB or something and I have a connection of 2Mbps so 10 mins were too long I guess. I had to shut the mbp by holding the power button. after 2 mins I press the power button. it started and showed the window of software update and downloaded it automatically and updated, fans went on full speed as mentioned in the update.
    Now that I check my firmware version. It shows me " SMC Version (system):          1.69f4 "
    My question is shouldn't it be SMC Version : 1.7 ? :|

    That's the right FW version. Apple is all screwy with numbers. There posted FW update 1.7 mean just about nothing.
    If you want to save yourself a few headaches turn off the Auto Update system and then periodically run Software Update. If there are updates look at what they are and you can pick and chose which ones you install. If you don't need it, the system is running fine, there is no good reason to constantly do updates.
    This also give you a chance to look at the support document for the update and do a google search to see if there are any problems being reported.

  • My macbook's safari wont open. At first it got deleted and so i got it back by bluetooth and now t wont open because of the update. Any ideas on how to update it or get safari back? it got deleted :/

    my macbook's safari wont open. At first it got deleted and so i got it back by bluetooth and now it wont open because of the version of mac OS X update. Any ideas on how to update it or get safari on my mac? It got completly deleted i checked everywhere including applications but its gone. it got deleted :/

    Here it is : Safari 5.0.6 for Leopard

  • Any idea about the pricing of the hardwares for Oracle 10g RAC?

    Hi,
    If I go for 2 nodes RAC using Dell servers and Disk array, any ideas about the prices? (just for the hardwares.)
    Thanks.
    Regards,
    Jason

    It's all about the shared disk(s).
    If you are only ever going to use two (2) nodes a SCSI JBOD solution is cheap. (practical too with ASM as the cluster filesystem / volume manager)
    More than 2 nodes, you step up to certified NFS, iSCSI or FC/AL connected storage. More expensive, faster, more flexible.
    The computers are the cheapest portion of the cost especially with multiple core multiple cpu 64bit linux based servers being so inexpensive.

  • Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

    Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

    Can you start Firefox in [[Safe mode]] ?
    You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Any news in N80 firmware updates?

    It seems very quiet lately
    Any news on N80 firmware updates?
    A version better than v4.0707.0.7
    Im getting sick in waiting
    The service command bug is really irritating

    hi guys , am disappointed too ! lets kill some time imagining what will the new firmware contain lol
    i have many suggestions many of it is stuped
    1. i wish i can remove the 2 shortcuts (horisantal ) wich is : 1.wireless scanning + 2. calender , if there exisit some option to display/remove display of them
    2. if there is a way to remove the themes painlessly
    3. i want my special files pics/videos etc not to be displayed in the gallary that contain all multimedia files ( even though what i put in a seperate folder ) if i can check what folders only to be displayed in galary
    4. optional autolock with each slide closing
    5.simple way to connect the internet using wifi because sometimes am already connected using some wifi connection and when browsing it says ( connection needed ) but am already connected , make it unified
    6.when i close some page in the net browsing it close the connection automatically , make this optional not mandatory
    i got much much more lol i know it sounds silly , but these aint hard things and dont affect other customer because its all optional lol , and ah !
    7. i have 2 GB miniSD so make the sound recorder record more than one minute depending on the memory size
    8. optional call ending each slide closing
    9. if installed themes/application can be copied/sent via bluetooth or sth ..
    thanx lol common guys kill some time with expressin your needs in the new firmware PPPPPMessage Edited by mohsh86 on 13-Jun-200702:40 AM
    Message Edited by mohsh86 on 13-Jun-200702:42 AM

  • I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?

    I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?

    Hi,
    Please give this a try: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
    Thanks,
    Rameez

  • HT1551 When i tried to purchase a movie, My Apple TV said it would take 11 hours to load. Any ideas about what to do or what is going on with that?

    When i tried to purchase a movie, My Apple TV said it would take 11 hours to load. Any ideas about what to do or what is going on with that?

    It always has a very high number at the beginning, but it never takes that long....
    However, it can take several hours....I've found this to be true on any device or computer I've downloaded movies or tv shows on - Mac, PC, iPad, Kindle Fire....you name it.
    However, even if it does take a long time, that does not prevent you from starting to watch it as soon as it has done a little downloading. Here is the Apple link for typical download times:
    http://support.apple.com/kb/HT1577
    Here is a link with Purchased Movie FAQs:
    http://support.apple.com/kb/ht1906#faq24
    Cheers,
    GB

  • After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

    After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • HT201210 dose someone has any idea about error 1015 when trying to restore iphone iOS?

    Dose someone has any idea about error 1015 when trying to restore iphone iOS?

    Error 1015 means the phone was jailbroken. You can not get help here.

Maybe you are looking for