Any ideas? Boot troubles on a MS-6380

The system posts fine and the LED lights on the MB come up all green, yet whenever I try to boot up the system hangs.
When I try to boot from the HD, it tries to load windows and eventually hangs up. Hangs up in safe mode and normal mode.
When I try to boot from the floppy, it tries to read the floppy and then hangs up. Figured maybe I just had bad luck and the OS got corrupted and the floppy disk as well. So I created a new boot disk and it won't work either.
I've reset the CMOS and that didn't fix the problem, I would flash the bios but I'm unable to get into DOS to do so. I 've never had problems with the board in the past, but I went without using the system for a couple of months and now when I need it I cannot use it. :P
I'm completely out of ideas. I figured it was a bad stick of memory so I tried a different stick and the same thing happens. I'm not getting any beep errors or LED errors so I'm pretty in the dark of what could be wrong.
AMD Athlon 1 ghz
G2 Ultra 64 MB video card
256 MB Crucial PC2100

Hi,
I looks like the CPU cooler gotten into trouble.
Checkout the trouble guide on this matter :D

Similar Messages

  • I am having trouble trying to boot from my lion osx install disk on a 2007 macbook.  The disk ejects when I start up with the option key depressed.  Anyone have any ideas?

    I am having trouble trying to boot from my lion osx install disk on a 2007 macbook.  The disk ejects when I start up with the option key depressed.  Anyone have any ideas?
    Thank you.

    How did you get a Lion OSX install disc? They don't exist. Do you mean the gray disks that came with your 2007 MacBook?
    If you mean the gray disks, try starting up with the "c" key held down.
    What version of OSX is on your MacBook now? Have you tried booting from the Recovery partition?

  • HT201412 My iPad will not boot up, has a think logo running but will not start. Any ideas?

    My Ipad will not boot up, has a think logo running all the time...any ideas. Also had trouble upgrading to ios.6 the computer is not the original one I synved my ipas too. It started OK then failed. Now it will not connect at all to computer...comes up with an error.!!!

    Try DFU Mode Restore. Open iTunes on computer, connect iPhone to computer. Hold both Home and Power buttons for exactly 10 seconds, release Power button, keep holding Home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds time. Restore iPhone Firmware.

  • My new macbook air sometimes has trouble starting up. It gets stuck at various stages. I have reinstalled Lion twice. That solves the problem for a few days and then in reoccurs. Any ideas? Thanks, Marty

    My new macbook air sometimes has difficulty booting up. I reinstalled Lion twice. That soves the problem temporarily and then after a few days it reoccurs. It also has trouble at times opening mail or Microsoft Word. Any ideas? Thanks, Marty

    Marty,
    Can you elaborate on what you mean by "difficulty" during the boot sequence? When/where is the difficulty occurring? Are you getting to the Apple logo? Apple logo with spinning gear? Blue screen? Login window? There's many phases to the boot sequence and when it fails can go a long way in determing what's causing the problem.
    Also, what sort of third party software is installed? It sounds like at a minimum you've installed Microsoft Office? Anything else?
    Lastly, after you reinstall Lion do you perform a restore from backup or remigrate your data/content right back into the new OS? If so that could potentially be the problem right there. But truthfully there's more information that needs to be provided to begin recommending troubleshooting steps.

  • My imac won't boot up.  I get a white screen with the apple logo and the spinning  spiral--any ideas?

    my imac won't boot up.  I get a white screen with the apple logo and the spinning  spiral--any ideas?
    I have started having trouble since i had to upgrade OS the latest in July 12.

    http://support.apple.com/kb/TS2570    Follow this article and when it gets to the part where you go into disk utility using your install disc, you'll actually boot up holding down Command and R

  • I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    You need to use the computer's install disks to repair the hard drive or install a new OS.
    (58033)

  • Mac Mini (Core Solo 1.5GHz) won't boot.  Any ideas?

    My Mac Mini is hanging when I try to boot up (just sits at the grey apple screen and the progress wheel just cycles indefinitely). I've tried booting into single user mode and running fsck and the disk is fine. If I try booting in verbose mode it seems to hang with an error pertaining to the AirPort card.
    I've mounted it in target mode and backed up /Library and /Users in case a nuke&pave is required and have grabbed a copy of system.log to get the error messages. Here's the entire boot sequence up to the point where it hangs:
    Aug 17 11:13:42 localhost kernel[0]: npvhash=4095
    Aug 17 11:13:37 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
    Aug 17 11:13:37 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
    Aug 17 11:13:42 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/machinit.d/airportwps.plist
    Aug 17 11:13:42 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/AVCAssistant.plist
    Aug 17 11:13:42 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
    Aug 17 11:13:42 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    Aug 17 11:13:42 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
    Aug 17 11:13:42 localhost com.apple.launchd[1] (com.apple.distccdConfigd): Unknown key: SHAuthorizationRight
    Aug 17 11:13:42 localhost com.apple.launchd[1] (com.apple.mio.AVCAssistant): Conflict with job: 0x100c90.AVCAssistant over Mach service: com.apple.mio.AVCAssistant
    Aug 17 11:13:42 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    Aug 17 11:13:42 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    Aug 17 11:13:42 localhost DirectoryService[11]: Launched version 5.4 (v514.21)
    Aug 17 11:13:44 localhost kernel[0]: hi mem tramps at 0xffe00000
    Aug 17 11:13:43 localhost DirectoryService[11]: Improper shutdown detected
    Aug 17 11:13:44 localhost kernel[0]: PAE enabled
    Aug 17 11:13:44 localhost kernel[0]: Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    Aug 17 11:13:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Aug 17 11:13:44 localhost kernel[0]: vmpagebootstrap: 120359 free pages and 10713 wired pages
    Aug 17 11:13:44 localhost kernel[0]: migtable_maxdispl = 79
    Aug 17 11:13:44 localhost kernel[0]: 95 prelinked modules
    Aug 17 11:13:44 localhost kextd[10]: 412 cached, 0 uncached personalities to catalog
    Aug 17 11:13:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Aug 17 11:13:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Disabled
    Aug 17 11:13:44 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    Aug 17 11:13:44 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    Aug 17 11:13:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Aug 17 11:13:44 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    Aug 17 11:13:44 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    Aug 17 11:13:44 localhost kernel[0]: calling mpopolicyinit for mb
    Aug 17 11:13:44 localhost kernel[0]: Seatbelt MACF policy initialized
    Aug 17 11:13:44 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    Aug 17 11:13:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Aug 17 11:13:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Aug 17 11:13:44 localhost kernel[0]: MAC Framework successfully initialized
    Aug 17 11:13:44 localhost kernel[0]: using 2621 buffer headers and 2621 cluster IO buffer headers
    Aug 17 11:13:44 localhost kernel[0]: devfsmakenode: not ready for devices!
    Aug 17 11:13:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Aug 17 11:13:44 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Aug 17 11:13:44 localhost kernel[0]: mbinit: done
    Aug 17 11:13:44 localhost kernel[0]: Security auditing service present
    Aug 17 11:13:44 localhost kernel[0]: BSM auditing present
    Aug 17 11:13:44 localhost kernel[0]: rooting via boot-uuid from /chosen: 43C1E330-E913-3A15-99A2-A28E6D9FC45A
    Aug 17 11:13:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Aug 17 11:13:44 localhost kernel[0]: AppleYukon2: 532111ab,00000000 sk98osx_dnet - CheckDictionaryEntry failed, expected vs. dictionary
    Aug 17 11:13:44 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 0016cbfffe540f6a; max speed s400.
    Aug 17 11:13:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST96812AS Media/IOGUIDPartitionScheme/Merged_Untitled@2
    Aug 17 11:13:44 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Aug 17 11:13:44 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 6368256 to: 7754752 (joffset 0x1be000)
    Aug 17 11:13:44 localhost kernel[0]: CSRHIDTransitionDriver::start [-v]
    Aug 17 11:13:44 localhost kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
    Aug 17 11:13:44 localhost kernel[0]: jnl: unknown-dev: journal replay done.
    Aug 17 11:13:44 localhost kernel[0]: Jettisoning kernel linker.
    Aug 17 11:13:44 localhost kernel[0]: Resetting IOCatalogue.
    Aug 17 11:13:44 localhost kernel[0]: GFX0: family specific matching fails
    Aug 17 11:13:44 localhost kernel[0]: display: family specific matching fails
    Aug 17 11:13:44 localhost kernel[0]: Matching service count = 1
    Aug 17 11:13:44 localhost kernel[0]: Matching service count = 3
    Aug 17 11:13:44: --- last message repeated 4 times ---
    Aug 17 11:13:44 localhost kernel[0]: GFX0: family specific matching fails
    Aug 17 11:13:44 localhost kernel[0]: display: family specific matching fails
    Aug 17 11:13:44 localhost kernel[0]: Previous Shutdown Cause: 3
    Aug 17 11:13:44 localhost kernel[0]: yukon: Ethernet address 00:16:cb:a2:72:95
    Aug 17 11:13:46 localhost kernel[0]: USBF: 12.307 AppleUSBHubPort: Port 1 of Hub at 0x7d000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
    Aug 17 11:13:46 localhost kernel[0]: USBF: 12.615 CSRHIDTransitionDriver[0x233ac80](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Aug 17 11:13:46 localhost kernel[0]: CSRHIDTransitionDriver... done
    Aug 17 11:13:46 localhost com.apple.kextd[10]: kld(): Undefined symbols:
    Aug 17 11:13:46 localhost com.apple.kextd[10]: __ZN16IO80211Interface11postMessageEi
    Aug 17 11:13:46 localhost com.apple.kextd[10]: _ZN16IO80211Interface22monitorModeInputPacketEP6_mbuf
    Aug 17 11:13:46 localhost com.apple.kextd[10]: _ZN17IO80211Controller20outputRaw80211PacketEP16IO80211InterfaceP6_mbuf
    Aug 17 11:13:46 localhost kextd[17]: kldload_frommemory() failed for module /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros54 24.kext/Contents/MacOS/AirPortAtheros5424
    Aug 17 11:13:47 localhost kernel[0]: ath_attach: devid 0x1c
    Aug 17 11:13:46 localhost kextd[17]: a link/load error occured for kernel extension /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros54 24.kext
    Aug 17 11:13:47 localhost kernel[0]: mac 10.3 phy 6.1 radio 10.2
    Aug 17 11:13:48 localhost ReportCrash[16]: Formulating crash report for process configd[14]
    Aug 17 11:13:48 localhost mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[18]: starting
    Aug 17 11:13:48 localhost com.apple.launchd[1] (com.apple.configd[14]): Exited abnormally: Segmentation fault
    Aug 17 11:13:48 localhost DirectoryService[11]: CCachePlugin::ProcessRequest failed to register for DNS Notifications
    Aug 17 11:13:49 localhost com.apple.launchd[1] (com.apple.configd): Throttling respawn: Will start in 4 seconds
    Anyone got any ideas how I can try to fix the problem? I don't actually use the AirPort card as it's wired into my router so if there's any way I can disable it that might be useful.
    In the case of a nuke&pave is there anything else I should back up besides /Library and /Users?

    Fixed it!
    I mounted it in target mode again and manually applied the 10.5.4 combo updater ad it now boots again.

  • I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. right now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service" any ideas on what i shud do?

    I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. initially itunes would let me go so far as downloadin the new software then an error poped up as soon as the download finished, and now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service, reconnect or try again later" any ideas on what i shud do?

    Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

  • Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

    Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~)  refers to your Home directory.
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
    Hope this helps.

  • I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

    I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

    Hi LamboMong,
    just try this:
    http://refit.sourceforge.net
    install, reboot twice and choose the Windows-Partition on next startup.
    (The apple-bootloader doesn't display all bootable harddisks.
    With rEFIt you can boot from all partitions/harddisks on your computer.)
    I hope that will solve your problem.
    Daniel Fernau

  • I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

    I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed  ...any ideas?

    I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
    And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
    And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

  • I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

    I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
    <E-mail Edited by Host>

    Hi John,
    That's often a sign of a bsad Capacitor in the Power Supply, but...
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 

  • TS4006 Hi I am having trouble updating my apps I have tried one at a time and all together but they just will not load any ideas would be appreciated

    Hi, I am having trouble updating my apps, I have tried one at time and all together but they just keep on whirring away and nothing happens! any ideas woud be appreciated.

    Suggest you update all these apps on iTune (computer) and sync them to your iPad.

  • I have 3rd Generation IPod Touch, it does not boot up.  We have tried to restore, but we are stilling receiving errors.  Any ideas?

    I have a 3rd generation IPod Touch that no longer boot up.  I've downloaded the recovery, but it does not work.  It just lights up briefly and then we receive a message that the IPod drivers are not readable.  Any ideas what we can do to resolve?

    If iTunes is not seeing the iPod try:'
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    You said you "download the recovery"?  What is the recovery?

  • Can't boot up after Yosemite, not even in safe mode. Just hangs, or states unable to repair. Any ideas?

    When starting up it tried to install Yosemite, got about half way throught then stated it could not repair the disk (it wasn't broken!). Now it doesn't even try to install, it just get half way through a normal boot up and hangs. Have no access to anything so can't even uninstall/delete. The boot disk that came with my Mac doesn't work either. Can anyone think of a way out of this and still save what's on the disk?

    Hey there, it looks like you have a serious issue with Windows. However, as far as I can tell, Firefox is unable to cause this to your system. The update is confined to the Firefox program files, at worst it would make Firefox unusable.
    Unfortunately I don't have any idea what might have caused the issue in this case, but I'd suggest asking in forums that are specifically for Windows. They might be able to help you with getting back to a functional system.
    --Kadir

Maybe you are looking for

  • Criteria item is not being used in the LOV query

    Hi All, I have one 'messageChoice' bean which is associated with a view I have configured it correctly I have one 'messageLOVInput' bean above 'mesaageChoice' acts as criteria item for 'messageLOVInput' I created two maps one for each beans When I se

  • Pages from OSX Server - Slow and impossible

    Is anyone using Pages 08 in an office setting with OSX Tiger Server? We are an office with only 5 users and trying to migrate from AppleWorks to Pages '08. The speed at which Pages '08 saves and opens files from our server is terrible... documents ta

  • Best practices for saving files when emailing to the media?

    I'm pretty much an Ai imposter. I have Illustrator cs4 (14.0.0) and the way I use it is to cobble my designs together from iStock vector files and a lot of trial and error. Occasionally my husband throws me a lifeline because he is skilled with Photo

  • Question about 'floats'.

    This is the web page causing me 'concern' <http://www.peterforkes.com/Recipes/AlfredoSauce.html> I have a box within a box.  If the box, inside the outer box is bigger than the outer box I'd like the outer box to grow to be bigger, to accommodate it.

  • Mulitple grid in single form

    hi all, we are developing one report. its have multiple tabs. each tab having separate grid. but its not working. when i press second tab its show the error. example:Open,closed,Completed,hold,inactive thanks & regards B.Lakshmi Narayanan