Any ideas on getting CDM to work in non-global zones ?

I'm trying to find a way to use SGD in a Solaris containers enviroment. For the most part this works great except I can not get the client drive mapping to work. This is due to the fact that nonglobal zones are unable to be nfs servers however I see in the client.prf file I can add a different host to the config as the nfs server. has anyone tried this and gotten it too work ?
when I try I am able to physically mount the share but if i let SGD do it I get :
nfs mount: localhost: : RPC: Program not registered
nfs mount: retrying: /smb
any thoughts ?

Hi tonys60181,
Could you please let me know what version of Adobe Acrobat are you using.
What all drawing tools are you unable to access?
Is this issue specific to one PDF file or all?
What exactly happens when you try to use any drawing markup?
Please let me know.
Regards,
Anubha

Similar Messages

Can not use all the tools in my drawing markups any ideas on getting them to work?

Can not use all the tools in my drawing markups any ideas on getting them to work?

Hi tonys60181,
Could you please let me know what version of Adobe Acrobat are you using.
What all drawing tools are you unable to access?
Is this issue specific to one PDF file or all?
What exactly happens when you try to use any drawing markup?
Please let me know.
Regards,
Anubha

Any ideas on getting airplay to work with u-verse router?

Ok, so my airplay is just horrible on my apple tv/iphone/macbook pro combo.
Airplay is a total joke, it will play to the apple tv for maybe 20 seconds and then it just gets all choked. The "remote" app does the same thing. I upgraded my internet connection thinking that at&t would come out and give me a new router too, but i guess they just bump the download speeds to the router. I'm pretty sure that the router is the problem. It's a "2wire" 802.11g supplied by att.
Any ideas would be appreciated. I'm going to call the support number for the apple tv, but it's been my experience that support people are just looking at the same simple trouble shooting info that is posted on the internet. So i'm not expecting much.

well i did get airplay to work better by trying all the channels in the router and settling on channel 4 as being the most reliable.
Now if I could only get netflix to stream without stopping every minute or so. We have a 12mbps internet connection. Which is about 4 times faster than the standard At-t connection speed
I still think that this stuff requires a much better router than most people have. My router is a G router, and it seems maxxed out. I wish i knew that things would work well with a faster N router.

Any ideas for getting AirPlay to work???

I have been researching the subject of enabling AirPlay on my iPod Touch (Gen4) and iPad2 for quite some time. I have read a number of blogs and articles and reviewed many of the postings on this forum. Unfortunately, none of the information has allowed me to enable AirPlay on my iPad2 with my Dell running Windows7.
Here is what I have done thus far:
1) I have enabled Home Sharing on my iPad (under iPod settings) and on iTunes on my PC. In using the Remote app on the iPad, I can see my library.
2) I have made sure both devices are on the same Wi-Fi network.
3) I have performed a plethora of restarts on the iPad.
4) I have disabled the firewall on my PC.
5) I have performed so many syncs I have lost count.
6) I have gone through the troubleshooting steps provided on the Apple website.
7) I have validated that iTunes is current, using 10.2.1.1.
Everything that I have tried has yielded the same result, I am unable to see the AirPlay icon in the iPod app, videos, etc. Two things to mention, although I was under the impression these two things did not matter: 1) I do not have any music on the iPad (I didn't think it mattered) and 2) I do not have any videos on the iPad.
Any ideas what I can try next?

AirPlay lets you stream content from your iOS device to an Apple TV or an AirPort Express.
From here:
http://www.apple.com/ios/
Get even more play out of AirPlay — the wireless technology that lets you stream content from your iPhone, iPad, or iPod touch to your HDTV via Apple TV.1 In addition to music, movies, and photos, AirPlay now streams video from your Photos app. So you can shoot a home video and instantly share it with everyone in the room. Even AirPlay-enabled apps and websites get the big-screen treatment with iOS 4.3. And if your photos are the feature presentation, you can play a slideshow with all the stunning themes available on Apple TV.

Any IDEA of Getting Server Time & RUn JavaScript Clock

Hi ,
Any idea of getting Server Time & running javascript Clock
I tried using ..
var tDate=<%=new java.util.Date()%>;
But it is not working
Plz help

You can create a date in javascript like this
new Date(year, month, day, hours, minutes, seconds, milliseconds) You don't have to supply all the parameters (this is javascript after all)
Getting it from java, into javascript...
<%
java.util.SimpleDateFormat sdf = new java.util.SimpleDateFormat("yyyy,MM,dd,HH,mm,ss,SS");
Date now = new Date();
String sNow = sdf.format(now);
%>
var tDate = new Date(<%=sNow %>)

I am trying to restore ipad from previous back up. it requests a password it is none of the passwords I have used in the last decade any ideas to get around this?

I am trying to restore my ipad from previous back up. itunes requests a password, it is none of the passwords I have used in the last decade any ideas to get around this?

The password would be either your iTunes ID password or your admin password for the Computer.
MJ

I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it fomr the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?

I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?

You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years.

My ipod nano just stopped working right after playing a song, any suggestions to get it back working?

my ipod nano just stopped working right after playing a song, any suggestions to get it back working?

Did the battery run out of power? If not, try doing a Reset to "reboot" the iPod
http://support.apple.com/kb/ht1320
(A Reset does NOT erase the iPod.)

Can't open my Yahoo email. Message says "connection to the server failed". Any ideas to get there?

Can't open my Yahoo email. Message says "connection to the server failed". Any ideas to get there?

Hi saghd,
I have an article for you that will walk you through some troubleshooting steps regarding this issue:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using the Apple Support Communities!
Cheers,
Braden

Lucreate not working with ZFS and non-global zones

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here... I'm experiencing the exact same issue on my system. Below is the lucreate and zfs list output.
# lucreate -n patch20130408
Creating Live Upgrade boot environment...
Analyzing system configuration.
No name for current boot environment.
INFORMATION: The current boot environment is not named - assigning name <s10s_u10wos_17b>.
Current boot environment is named <s10s_u10wos_17b>.
Creating initial configuration for primary boot environment <s10s_u10wos_17b>.
INFORMATION: No BEs are configured on this system.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
PBE configuration successful: PBE name <s10s_u10wos_17b> PBE Boot Device </dev/dsk/c1t0d0s0>.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <patch20130408>.
Source boot environment is <s10s_u10wos_17b>.
Creating file systems on boot environment <patch20130408>.
Populating file systems on boot environment <patch20130408>.
Temporarily mounting zones in PBE <s10s_u10wos_17b>.
Analyzing zones.
WARNING: Directory </zones/APP> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/APP-patch20130408>.
WARNING: Device <tank/zones/APP> is shared between BEs, remapping to <tank/zones/APP-patch20130408>.
WARNING: Directory </zones/DB> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/DB-patch20130408>.
WARNING: Device <tank/zones/DB> is shared between BEs, remapping to <tank/zones/DB-patch20130408>.
Duplicating ZFS datasets from PBE to ABE.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b> on <rpool/ROOT/s10s_u10wos_17b@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b@patch20130408> on <rpool/ROOT/patch20130408>.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b/var> on <rpool/ROOT/s10s_u10wos_17b/var@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b/var@patch20130408> on <rpool/ROOT/patch20130408/var>.
Creating snapshot for <tank/zones/DB> on <tank/zones/DB@patch20130408>.
Creating clone for <tank/zones/DB@patch20130408> on <tank/zones/DB-patch20130408>.
Creating snapshot for <tank/zones/APP> on <tank/zones/APP@patch20130408>.
Creating clone for <tank/zones/APP@patch20130408> on <tank/zones/APP-patch20130408>.
Mounting ABE <patch20130408>.
Generating file list.
Finalizing ABE.
Fixing zonepaths in ABE.
Unmounting ABE <patch20130408>.
Fixing properties on ZFS datasets in ABE.
Reverting state of zones in PBE <s10s_u10wos_17b>.
Making boot environment <patch20130408> bootable.
Population of boot environment <patch20130408> successful.
Creation of boot environment <patch20130408> successful.
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 16.6G 257G 106K /rpool
rpool/ROOT 4.47G 257G 31K legacy
rpool/ROOT/s10s_u10wos_17b 4.34G 257G 4.23G /
rpool/ROOT/s10s_u10wos_17b@patch20130408 3.12M - 4.23G -
rpool/ROOT/s10s_u10wos_17b/var 113M 257G 112M /var
rpool/ROOT/s10s_u10wos_17b/var@patch20130408 864K - 110M -
rpool/ROOT/patch20130408 134M 257G 4.22G /.alt.patch20130408
rpool/ROOT/patch20130408/var 26.0M 257G 118M /.alt.patch20130408/var
rpool/dump 1.55G 257G 1.50G -
rpool/export 63K 257G 32K /export
rpool/export/home 31K 257G 31K /export/home
rpool/h 2.27G 257G 2.27G /h
rpool/security1 28.4M 257G 28.4M /security1
rpool/swap 8.25G 257G 8.00G -
tank 12.9G 261G 31K /tank
tank/swap 8.25G 261G 8.00G -
tank/zones 4.69G 261G 36K /zones
tank/zones/DB 1.30G 261G 1.30G /zones/DB
tank/zones/DB@patch20130408 1.75M - 1.30G -
tank/zones/DB-patch20130408 22.3M 261G 1.30G /.alt.patch20130408/zones/DB-patch20130408
tank/zones/APP 3.34G 261G 3.34G /zones/APP
tank/zones/APP@patch20130408 2.39M - 3.34G -
tank/zones/APP-patch20130408 27.3M 261G 3.33G /.alt.patch20130408/zones/APP-patch20130408

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here...The thread was locked because you were not replying to it.
You were hijacking that other person's discussion from 2012 to ask your own new post.
You have now properly asked your question and people can pay attention to you and not confuse you with that other person.

Any work around ideas to get Shake to work with Yosemite?

Alright, now that I have confirmed the sad news about Shake on Yosemite: Does shake still work with OS X Yosemite? I imagine I will eventually need to upgrade for the sake of my other software... Any ideas for a work around for when the day comes? Any cheeper options than running Mavericks in Parallels (Seeing as I would have to buy it)?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Have just upgraded Itunes to new version, and Iphoto to new version. All went well. but this morning unable to open either of them. keep getting " Itunes quit unexpectedly, reopen" I keep on reopen, but to no avail. Any idea how to make it work?

After upgrading to IOS5, and new version of Itunes and new version of Iphoto11, I now have a problem opening itunes and iphoto11.
I get" Itunes quit unexpectedly, reopen" same message for Iphoto. Tried and tried and tried to reopen, but keep getting the same message over again.
Any idea how to fix it?

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

I have an apple id and i changed the password for setting up a ne ipod touch. it will not let me use my email address. keep getting error message to change my password. any ideas on why it wont work!

I purchased an iPod touch for my husband for Christmas. I am trying to set it up and using his email address but a message says his email is already in use and if we want to use it we must change the password. we did that and it still won't let me do anything. Any ideas on what could be wrong?

delete the email account and try again

Any ideas why this won't work?

I appreciate all the help this board provides. I've learned a ton coming here as I continue to grow my SQL knowledge.
I need this query to look at the Work_order table and pull any lines that were closed during the prior day. Then I need it to look at the Stock_Tran table and pulled and lines that had a Date_Trans during the prior day. That will give me the work completed and the work that was partially completed during the prior day.
I'm getting an error message at the line I've underlined and bolded that work_order.partno is an invalid identifier (I'm sure that's not the only error). The query worked until I started adding the Stock_Tran table.
Any ideas would be greatly appreciated!!!
SELECT
SITECODE
, WORK_ORDER_NUMBER AS "WO #"
, partno
, WO_PRIORITY AS "PRIORITY"
, QTY_WORK_ORDER
, QTY_FINISHED
, TRUNC(WO_RELEASE_DATE) AS "RELEASE DATE"
, TRUNC(WO_START_DATE) AS "START DATE"
, TRUNC(WO_CLOSED_DATE) AS "CLOSED DATE"
, STOCK_TRAN.QTY_CHANGE
FROM
WORK_ORDER
, (SELECT SUM(QTY_CHANGE) AS "QTY WORKED" FROM STOCK_TRAN
WHERE
SITECODE = 'FCI'
AND STOCK_TRAN_CODE = 'P'
AND DATE_TRAN = TRUNC(SYSDATE - 1)
AND WORK_ORDER.SITECODE = STOCK_TRAN.SITECODE
AND WORK_ORDER.PARTNO = STOCK_TRAN.PARTNO)_
WHERE
WORK_ORDER_TYPE = 'K'
AND SITECODE = 'FCI'
AND (TRUNC(WO_CLOSED_DATE) = TRUNC(SYSDATE - 1) OR STOCK_TRAN.DATE_TRAN = TRUNC(SYSDATE -1) )
AND QTY_FINISHED >0
ORDER BY WO_PRIORITY DESC

Hi,
847497 wrote:
That gets me closer! Thanks. Now I've getting an error at the line highlighted below.
Here's the error I'm getting: ORA-00904: "STOCK"."QTY_CHANGE": invalid identifier
SELECT
SITECODE
, WORK_ORDER_NUMBER AS "WO #"
, partno
, WO_PRIORITY AS "PRIORITY"
, QTY_WORK_ORDER
, QTY_FINISHED
, TRUNC(WO_RELEASE_DATE) AS "RELEASE DATE"
, TRUNC(WO_START_DATE) AS "START DATE"
, TRUNC(WO_CLOSED_DATE) AS "CLOSED DATE"
* , STOCK.QTYCHANGE*_I assume you mean this is the line where the error message points. It would be better to mark it with a comment, like this:
, STOCK.QTY_CHANGE -- ***** ORA-00904 occurs here ***** FROM
WORK_ORDER
, (SELECT SUM(QTY_CHANGE) AS "QTY WORKED"
, sitecode
, partno
, date_tran
FROM STOCK_TRAN
WHERE SITECODE = 'FCI'
AND STOCK_TRAN_CODE = 'P'
AND DATE_TRAN = TRUNC(SYSDATE - 1)
GROUP BY sitecode, partno ) stockThe only columns in the stock "table" (it's acutally an in-line view) are "QTY WORKED", SITECODE, PARTNO amnd DATE_TRAN.
If QTY_CHANGE is a column in the STOCK_TRAN table, then yiou can include it in the SELECT clause of the in-line view, and that will allow you to use it in the main query.
WHERE stock.sitecode = work_order.sitecode
AND stock.partno = work_order.partno
AND WORK_ORDER_TYPE = 'K'
AND work_order.SITECODE = 'FCI'
AND (TRUNC(WO_CLOSED_DATE) = TRUNC(SYSDATE - 1) OR STOCK.DATE_TRAN = TRUNC(SYSDATE -1) )
AND QTY_FINISHED >0
ORDER BY WO_PRIORITY DESC

Any ideas why the sound only works on about half of my apps?

Any ideas why the sound on my ipad only works on about half of my apps?

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

Any ideas on getting CDM to work in non-global zones ?

Similar Messages

Maybe you are looking for