Any ideas on how I install Lion on a new hard drive

Any ideas on how I might install Lion on a new hard drive when I purchased the OS online from Apple prior to my hard drive failing? I don't have a disk.

when you install your new drive, what happens? it should boot into internet recovery and you setup from there.
does it not do that?
here is an article about how to force internet recover http://www.cultofmac.com/106669/force-lion-to-start-internet-recovery-on-your-20 11-or-later-mac-os-x-tips/
here is apple literature about the recovery partition (if you had a hard drive) http://www.apple.com/osx/recovery/
here is a do it yourself downloader that makes a usb stick the recovery disk. If you have data on the usb drive I would back it up, as this will erase everything else on the thumb drive. http://support.apple.com/kb/DL1433

Similar Messages

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How to install Windows 7 on new hard drive?

I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
1. How do I install Windows 7 on new hard drive?
2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
by the way this is my laptop spec (for reference) ; -
* Note *
I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
I hope somebody will help me answer my question,
Thank You
Solved!
Go to Solution.

I got the solution;
Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

How to install Mac OSX on New Hard Drive (No Disk)

I have a new Hard Drive that I just received and I'm looking to install it on my Early 2009 17 inch Macbook Pro. The problem is I dont have the original disk that came with my macbook. I do have a 2TB external HD so is there anyway I can back up Maverick on there and install it on the new Hard Drive without having the original Disk?

If your machine is running Mavericks with the old drive, just connect the new one in an external enclosure. Boot to the Recovery partition by holding the Command and R keys at startup. Run Disk Utility to prep the new drive, exit Disk Utility and install Mavericks.
You could also do the external enclosure and use Carbon Copy Cloner to copy your existing drive to the new one.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1395317179&sr=8-3&keywords=2.5+enclosure

How to install operating system on new hard drive without installation disc on macbook pro 2011

My macbook pro 2011 does not come with a recovery disc or any disc at all, my hard drive recently failed and i have no backup. i have replaced the hard drive but don't know how to install the operating system on the new hard drive.

If it originally shipped with 10.7 or newer, connect the computer to the Internet and start it up with the Option, Command, and R keys held down. You'll be able to install an OS.
If it shipped with 10.6.8 or earlier and wasn't upgraded to use Apple's Internet Recovery system, phone AppleCare and order the disks.
(109822)

How to install ios on my new hard drive?

My macbook's hardrive died. I have to change it, I have a spare hard drive at home, but I was never provided with an installation disc. how am i supposed to go ahead with the installation?

If it originally shipped with 10.6.8 or earlier, phone AppleCare and order replacement disks.
If it originally shipped with 10.7 or newer, press the Command and R keys at startup.
(102923)

Any ideas on how to install clx-3185fw on macbook pro

any idea on how to install samsung clx-3185fw on macbook pro?

So I'm guessing that this is a printer. Have you checked the Samsung web site for drivers, manuals, etc....? What have you done?

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

How do I install lion and format the hard drive?

How do I install lion and format the hard drive, as though this was a new mac.

If your Mac is a 2011 model and originally came with Lion Pre-Installed by Apple then you can use the Internet Recovery HD system to Wipe/Erase the Complete drive and Re-Install Lion.
If it is an older model, even and early 2011 model, that did NOT come with Lion Pre-Installed by Apple you can not sell or give it away with Lion installed on it. You have to install the original version of OS X on it.

How do i intall mountain lion on a new hard drive

How do i do it?
I bought a new 13" MBP a few weeks back and have now got my SSD. I realise that Apple no longer give out OS install discs and i don't have mountain lion purchased on my app store as it came with my laptop. So how do i install mountain lion on my new hard drive without having to buy mountain lion.

Option 1 - Newer Mac's like your come with internet recovery. Which means if your drive fails or is corrupted or in your case your install a brand new drive, internet recovery will let you reinstall the OS you are eligible for. So replace your drive and boot your system with cmd + R keys pressed down for 15 secs or so and your machine hooked to the internet. This will install ML from apple in your case.
Option 2 - Clone or backup (your entire system using time machine) your hard drive to a external USB disk. Replace your drive and then restore the new drive from the clone or backup.
Check this site for related articles .... http://nyacomputing.com/category/os/mac-os-x/

How to use recovery dvd on new hard drive, install window 7

hello, i have trouble with my laptop. my hard drive got bad sectors and now i need to replace my hdd to new one. im not sure how to reinstall window 7 on my new hdd.
is it possible to install operating system on new hard drive using recovery disk? and how?

Hi,
Yes, recovery discs will work on a new hard drive, but it's generally best to ensure that the replacement drive is of the same capacity ( slightly larger is Ok ) as the original - recovery discs can have issue when used on a drive that has a smaller capacity than the original.
When you have replaced the HDD, all you need to do is as follows.
Tap away at the esc key as you start the notebook to enter the Start-up Menu.
Insert the 1st Recovery Disc.
Select Boot options ( f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
You will be prompted to insert subsequent discs as required.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I am having trouble installing Lion on a partitioned hard drive. Help?

Aloha:
I am having trouble installing Lion on a partitioned hard drive
I have three internal HD's The first I am running the system on 10.6.8 (which is up to date) , the second I do most of my work on and the third I have partitioned into two and I am trying to install Lion on one of the patitions.
But Lion has decided it will only go on the first HD.
Above is the one I want to put it on, but it's not available and I can't change the partition scheme. None of the things the directions state are usable??
What might I be doing wrong?
Thanks
Dan Page

Thanks again for a rapid responce.
I finally got lion on one partition and my daily "SilverKeeper" backup on the other.
Since the only thing I had on the two partition Hard drive was the back up and since the backup would get put on tonight any way I changed the drive to no partitions. This gave me the ability to choose the GUID option, which I did and then I installed two partitions and successfuly istalled Lion on one of them. I even tied Lion into the iCloud successfuly.
But I am not out of the woods yet! I brought My brand new iPad to lunch and was informed that my iPad was synced to my Lion at home and I was on the cloud. That blew my mind, I was impressed.
I then read the Daily news with out problem, however, when I shut down my iPad, that was all she wrote. I can not get the iPad back on. The best I could do was see the revolving gear start and then freeze. It's on charge now and I can not even get rid of the frozen gear.
Not sure this all has anything to do with the recent installation on my main computer, but it's mighty suspicious.
Need some help!!
Thanks
Dan

I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download

I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download again

Thanks Dirk,
Tried your suggestion various ways but it had no effect the download button was still greyed out and the install button would not activate will keep trying to find a solution. I dont want to boot from the external hard drive that has Lion on mainly because it is a usb HD and the connection to my wireless modem slows the connection rate and downloading would take about ten hours

How to install archlinux2008.6 from the hard drive?

How to install archlinux2008_6 by archlinux2008_6_i686.iso in hard drive?
i get the booting files(archlive.img,vmlinuz26) in the archlinux2008_6_i686.iso and put them in c:\
in the grub command mode the use of these code:
root (hd0,0)
kernel (hd0,0)/vmlinuz26
initrd (hd0,0)/archlive.img
boot
i get those from : http://blog.chinaunix.net/u/31909/showart_1121360.html
but it stopped , some code printing on the screen...................it can not continue..
from the google i find :"this method must use the "vmlinz "and the "initrd.img",this files is from archlinux2008.03.iso
i don't understand .......
i must download the archlinux2008.03.iso?...........it's too much trouble.
How to install archlinux2008.6 from the hard drive? or who could give me the two files (the "vmlinz "and the "initrd.img") from archlinux2008.03.iso?
e mail: [email protected]
THS.
--------this is my topic for the first time in english, I hope that you can know what i said ~~~
Last edited by 自学linux (2008-08-29 03:14:54)

自学linux wrote:
http://blog.chinaunix.net/u/31909/showart_1121360.html
A waste of CD-ROM...........,in china, many people install linux just by iso,don't burn the iso,
could you give me the two files (the "vmlinz "and the "initrd.img") in archlinux2008.03.iso, those can't find in archlinux2008.06.iso
my email :[email protected]
Do you have a USB stick you could copy the image to? Where I live, a CD costs $0.50 at most. To put that into perspective. A coffee costs a $1.00. Either a CD costs a lot more than a coffee where you live or are you telling me you'd rather get a lot of grey hair than buy half a coffee?
Sorry I can't be of much help. I don't know how to do this method of installation. If you're desperate, you could try making an extra partition, and trying something with that. Take a look at these:
http://wiki.archlinux.org/index.php/Fas … nux_System
http://wiki.archlinux.org/index.php/Ins … her_distro
Last edited by solarwind (2008-08-27 04:37:59)

If I want to install Lions on a 2nd hard drive in my MacPro Desktop, will it allow me to do so if I have Leopard installed on the boot drive?

I have a blank 2nd hard drive that I am going to install in my MacPro desktop. The boot drive already contains the Leopard operating system. I want to install Lions on the blank hard drive. Will setup in Lions when it comes out, allow me to install Lions onto the 2nd hard drive since it should detect that I have a valid Apple operating system on the boot drive?

You can first install Snow Leopard then re-download Lion. Or you saved the original installer application then created a bootable Lion installer on a USB flash drive or DVD. Or you buy Apple's $69.00 USB flash installer.
You haven't told us what hindrances you've encountered, so you should post your own separate topic related to your problem and not threadjack another person's topic.

Any ideas on how I install Lion on a new hard drive

Similar Messages

Maybe you are looking for