Any ideas on how this is done
http://www.isboardmag.com/issue_2_dec_jan_2007/issue_2.php
the above link has a cool flash element and wondered if
anyone knew how this can be programmed or has any info on how i
could go about putting something like this together.
thanks
Google
Forum
Search
Similar Messages
-
Any ideas on how this is accomplished
http://www.manipulator.com/
does anyone have any ideas on how these rollovers are
created. i
figured with hitTest but couldn't really figure it out.yes but any ideas on how it is accomplished? invisible
buttons within the movieclips or what? its so smooth. -
Any ideas on how this was achieved?
A client has asked me to replicate this on a number of titles. I believe this example may have been hand animated but I can't be sure. I've had a good play but can't get near to it using plugins or mask interpolation. Anyone out there got any ideas?
It doesn't like any 3D type technique to me. I turn your text into individual masks, then animate those from the distorted shape down to the final correct shape.
Thanks,
Steve -
My I pad went black at 56 % battery.I tried charging it but it will not even charge now.Any idea on what happened or how it can be fixed?
Never mind I got it to work by holding down the home and power button for about 15 seconds.
-
Any ideas on how this iPhone app was created
It does not appear in the iTunes App store, but can be downloaded directly to an iPhone?.
URL is http://app.cat/apps/b070f7230351db4d865b957abe4ebb43/
Would this App be safe to install?.I'm not positive since they give scant details on that link - but it looks like it is just a html bookmark with icon. There was (is ?) a BBC podcasts "app" some years ago that was simply that - you downloaded it and got an icon that was nothing more than a bookmark to the BBC's podcast web site. This sounds like something similar, and if so calling it an "app" is a pretty big stretch. You can just fire up safari on your iPhone, go to the web site and it seems you will see everything they have to offer - book mark it yourself by choosing "add bookmark to home screen" and I think you would have everything they will send you but without giving them your phone number.
-
Messages from one of my contacts shows up on my iPhone but not on my iPad. I don't have similar problems with any of my other contacts. Any ideas on how to troubleshoot this?
Does your iPhone and iPad use the same address for Messages?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Any idea how this was done?
Hi everyone,
Just seen this site http://www.web4half.com/
I really love the way the gray background has moment to it and would love to do something similar.
Does anyone know either; how this is done? or can things like this be bought and used in Flash?
Many thanks, PAny tutorials on this you could suggest?
Thank you. -
Any ideas on how to do a local mirror for this situation?
I'm starting a project to allow ArchLinux to be used on a Cluster environment (autoinstallation of nodes and such). I'm going to implement this where I'm working right now (~25 node cluster). Currently they're using RocksClusters.
The problem is that the connection to internet from work is generally really bad during the day. There's a HTTP proxy in the middle. The other day I tried installing archlinux using the FTP image and I took more than 5 hours just to do an upgrade + installing subversion and other packages, right after an FTP installation (which wasn't fast either).
The idea is that the frontend (the main node of the cluster) would hold a local mirror of packages so that when nodes install use that mirror (the frontend would use this also, because of the bad speed).
As I think it should be better to only update the mirror and perform an upgrade not very often (if something breaks I would leave users stranded until I fix it), I thought I should download a snapshot of extra/ and current/ only once. But the best speed I get from rsync (even at night, where an HTTP transfer from kernel.org goes at 200KB/s) is ~13KB/s this would take days (and when it's done I would have to resync because of any newer package that could have been released in the meantime).
I could download extra/ and current/ at home (I have 250KB/s downstream but I get like ~100KB/s from rsync), record several CDs (6!... ~(3GB + 700MB)/700MB) but that's not very nice. I think that maybe this would be just for the first time. Afterwards an rsync would take a lot less, but I don't know how much less.
Obiously I could speed things a little If I download the full ISO and rsync current using that as a base. But for extra/ I don't have a ISOs.
I think this is a little impractical (to download everything) as I wouldn't need whole extra/ anyways. But it's hard to know all packages needed and their dependencies to download only those.
So... I would like to know if anyone has any ideas on how to make this practical. I wouldn't wan't my whole project to crumble because of this detail.
It's annoying because using pacman at home, always works at max speed.
BTW, I've read that HOWTO that explains how to mount pacman's cache on the nodes to have a shared cache. But I'm not very sure if that's a good option. Anyway, that would imply to download everything at work, which would take years.V01D wrote:After installation the packages that are in cache are the ones from current. All the stuff from extra/ won't be there until I install something from there.
Anyway, if I installl from a full CD I get old packages which I have to pacman -Syu after installation (that takes long time).
Oh, so that's how is it.
V01D wrote:
I think I'm going to try out this:
* rsync at home (already got current last night)
* burn a DVD
* go to work and then update the packages on DVD using rsync again (this should be fast, if I don't wait long time after recording it)
And to optimize further rsync's:
* Do a first install on all nodes an try it out for a few days (so I install all packages needed)
* Construct a list of packages used by all nodes and frontend
* Remove them from my mirror
* Do further rsync updates only updating the files I already have
This would be the manual approach of the shared cache idea I think.
Hmm... but why do you want to use rsync? You'll need to download the whole repo, which is quite large (current + extra + testing + community > 5.1GB, extra is the largest). I suggest you to download only those packages and their dependencies that you use.
I have similar situation. At work I have unlimited traffic (48kbps at day and 128kbps at night), at home - fast connection (up to 256kbps) but I pay for every megabyte (a little, but after 100-500 megabytes it becomes very noticeable). So I do
yes | pacman -Syuw
or
yes | pacman -Syw pkg1 pkg2 ... pkgN
at work (especially when packages are big), then put new downloaded files on my flash drive, then put them into /var/cache/pacman/pkg/ at home, and then I only need to do pacman -Sy before installing which takes less than a minute.
I have 1GB flashdrive so I can always keep the whole cache on it. Synchronizing work cache <-> flash drive <-> home cache is very easy.
P.S.: Recently I decided to make complete mirror of all i686 packages from archlinux.org with rsync. Not for myself but for my friends that wanted to install Linux. Anyway I don't pay for every megabyte at my work. However it took almost a week to download 5.1 GB of packages.
IMHO for most local mirror solutions using rsync is overkill. How many users are there that use more than 30% of packages from repos? So why to make full mirror with rsync when you can cache only installed packages? -
My iPhone 4s shuts down at least once a day, usually after I used it or when I'm not using it at all. It will not turn back on unless I reset it (by pressing home/power buttons) and when it turns back on, it runs like nothing happened. I have tried everything I can think of, update iPhone software, iTunes software, troubleshoot on Apple's Support page and reading other user's issues but I haven't seen anything similar. I erased and restore factory settings several times, made different backup attempts and even restored from recovery mode with iTunes. Everything goes great, no error message or anything unusual, until phone is off again, very frustrating. It doesn't seem to have a pattern to it, it happened when no apps were running as well as when a few apps were. The only thing I can think of is I haven't seen this happening when charger cable is plugged it. I don't really care about apps and content on the phone, but my contacts and voicemails are the only reason why I absolutely have to restore from backup, even after setting up a new phone, from iTunes. Other than that phone is brand new, battery is also great, nothing wrong with it (apparently).
I would like to know if somebody knows what this could be, and any ideas on how to fix it. Thank you.Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?
Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath -
I had Acrobat Standard 9.5 on a laptop that broke. Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”. Any ideas on how to fix this?
Rahul,
No error numbers other than the message I mentioned previously.
I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
When I unzip the Acrobat file this is what is in the setup ini file:
[Startup]
RequireOS=Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
[Product]
msi=AcroStan.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroStan.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
Thoughts?
Thanks again,
Tom -
When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)
The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse? -
I use Microsoft Office Professional Plus 2010, when clicking a link in Outlook I always get a box stating
General Failure. The URL was "http:// etc etc".The system cannot find the file specified.
Yet it still goes to the specified page. Any ideas on how to resolve thisI am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks. -
Slo mo videos show entirely in slo mo from beginning to end once transferred in to iPhoto, not in the regular/slo mo/regular speed in iPhone 6 (adjustable). Any ideas on how to maintain this?
Hi. I don´t use Iphoto, but after trying too upload from the Facebook app, I found out that the video isn´t saved as a finished video. (you can still edit it)
I used the iMovie app to save the movie as new finished movie. Open iMovie , those video, select your video, click the share button i down right corner. Push create movie (I guess, mine is in danish) play the movie or not, push the back button, change the name or not, push the share button, save the the movie. Now I think the movie can be exported to iphone. It also can also be shared in the Facebook app i closed groups, so you don´t have to put in on your wall first.
Hope this helps
Maby there are other ways i don't know -
Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found.
Do you have any idea on how to bypass this authentication ??
Regards,
GilsonHi...
After I have wait for 30 minutes without do anything, the wifi interface worked.
I don't know if Apple could fix the issue on their site or the reboot of the Iphone solved the problem.
I'm installing IOS 6 on the Iphone 4 of my wife. Let's see if the behaviour is the same.
I will post the informations after finish the installation.
Gilson
Maybe you are looking for
-
Is it possible to resize the log and capture window?
Hi, Using Final cut pro, I would like to make my capture window a bit bigger while capturing. I am capturing footage via my Blackmagic Infinity card and get the input through an HDMI cable. I'm capturing in Apple Pro ress on 720p, 59,59 fps. For a go
-
The page does not load correctly. Things that are supposed to be on the right or left side of the screen appear at the top of the screen in the same column as the posts.
-
Is there a way to rotate a video 90 degrees?
I am working with a video taken from an iPhone 4, and in iMovie it shows up flipped horizontally, when I want it to be vertical. Any suggestions?
-
Is there a way to hide the account ranges when creating a web-adi for budgets?
Hi, I'm trying to create budgets for an end-user. The user doesn't want to see all account ranges defined for that budget organization and would like to populate them on his own. I can hide the account ranges in the document creation page but not in
-
Permanently Disable Full Screen?
Safari keeps opening windows in full screen. Is there a way to turn off full screen completely?