Any Ideas on this? (K7N415 PRO)

An NForce board that doesn't like a Gainward GF4 Ti4200? This freaking crap blew my mind for about 3 hrs trying to get the system to boot. The system loves my Leadtek GF3Ti500. And my AMD Dualie likes the GF4 LOL.
The Nforce would hang at boot with MSI's little LED lights saying bad proc or proc not installed correctly with the GF4 installed. That is until I threw my hacked Promise Ultra 66 into PCI slot #5, when the promise card was in it would boot every time LOL. It would also make it farther into the boot without a vid card at all and would of coarse give me a No vid card error. I tried everything I could think of including swappin power supplies trying to boot out of the case to no avail. Any ideas guys?
System Specs
MSI K7N415 Pro No onboard Vid onboard everything else
XP 1900
Thermaltake Valcano 7
Gainward GF4Ti4200
Maxtor 60 gig HD
Toshiba 10x DVD
Plextor 40x12x40
256 megs of Crucial PC2100
Damm 400watt CompUSA power supply Ack
Cool lookin generic Case
Runnin Win2k

wow... thanks for the heads up. been having tons of problems trying to get my new nforce 415 board to boot up... I yanked the Gainward ti4200... and it booted past where it hung before. now I gotta borrow another vid card to use to flash bios I guess.
What version of the BIOS did you use? Also... is there a seperate bios for the 415? I only saw a bios for the 420 available on the msi page. Any help would be appreciated.

Similar Messages

I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?

I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?

Hi,
Please give this a try: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
Thanks,
Rameez

HT3275 Any ideas about this error message? (error -1)

Any ideas about this error message?
"The backup disk image “/Volumes/Data/ MacBook Pro.sparsebundle” could not be accessed (error -1)."

Standard Lion networking .. Reboot the TC or use the disconnect all users in the AU.. it has not closed the sparsebundle correctly from last time.. or has simply forgotten where the TC is.
It is reported at least once a day here.
See C17
http://pondini.org/TM/Troubleshooting.html

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox opened

try
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.

Problem transferring old iPhone 3GS to new phone 5S using computer. The iMac which I've been using to back up 3GS for years does not seem to recognize the 5S. No setup assist is coming on screen so I can't begin the transfer. Any ideas for this?

Problem tranferring old iPhone 3GS (ios 6.1.6) to new iPhone 5S (ios 8.1.2) through iTunes on my iMac computer (OSX 10.5.8) . I have backed up the 3GS this way since purchase of 3GS. The computer does not seem to recognize the 5S is there -- no setup assist is appearing on screen. Any ideas welcome.

this may not be your problem my according to the tech specs on apple.com the 5s requires:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 8; Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 11.1 or later (free download

Iphoto will not re-install after disappearing during a software update, any ideas why this happened?

Before i ran the software update i had to iphoto icons in the launch pad, both had exactlly the same content so i just ignored it for a wile till i needed to update my photos, which i was hoping to do after the update.
However when i restarted both iphoto icons had gone and iphoto seems to have been wiped off my mac completelly, I have got a back up of all my pic and videos so this is not a problem of recovering them.
i have then tryed to instal iphoto from the app store, resulting in there being a perminant downloading icon making no progress over the last two hours.
If any body has any idea why this happened and what i can do to provent it happening again as well as getting iphoto back the help wil be much apricated.

In addition to Larry's questions what software update did you apply? Do you still have an iPhoto Library in your Pictures folder? If you do what happens if you double click on it?
OT

When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?

When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?

See if the user tip helps: https://discussions.apple.com/docs/DOC-6562

I am getting an "error -5000" message when I try to backup my iphone 4 to itunes. Any ideas what this means?

i am getting an "error -5000" message when I try to backup my iphone 4 to itunes. Any ideas what this means?

Take a look at this link, http://support.apple.com/kb/ts1424

I have an iphone 3g on the top bar left of the battery symbol i have an icon of a lock with a cirular arrow around the lock any ideas what this is

hi my 3g ipone has problems connecting to a wifi hotspot,on the top next to battery symbol is a LOCK ICON with a circular arrow around lock .anyone have any idea what this signfies and could it be something to do with the wifi problems

It's orientation lock. Double tap the home button, swipe left to right, far left is the orientation lock. Tap on/off. Tap home button when finished.

I have an iPhone 4 and want to be able to send photos via ams. I hold down the copy button on the picture but when I go to paste it in the text of a message it won't paste. Any ideas on this please.Thanks

I have an iPhone 4 and want to be able to send photos via sms. I hold down the copy button on the picture but when I go to paste it in the text of a message it won't paste. Any ideas on this please??Thanks

No phone can send photos via SMS. You would need MMS (or iMessage or a 3rd party app such as WhatsApp). SMS messages are limited to 160 characters of text only.

I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?

I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?

Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Firefox fails to import history, cookies, favourites etc. from opera; cookies etc. are not listed in the space where you can select the items you want to import any idea how this comes? thanks!

In the importing operation Firefox detects Internet Explorer and Opera as installed browsers. When i select Internet Explorer cookies, history, favourites etc. are listed in a box where you can select the items you want to import in Firefox. When i select Opera no items are listed that can be imported. Any idea how this comes?

Hi,
I think that what you are searching be in Tools >> Options >> Privacy >> On Firefox will: change to "Use custom settings for history" then Button Show Cookies will be allowed and you will see the cookies in your browser in the next window
If you uncheck "Accept cookies from sites", probably the sites that need cookies will alert you that you need active the storage cookies

My Mac won't read cyrillic in certain files and displays instead weird characters like this: "–í–µ-Ç–µ-Ä –ø-Ä–æ–¥–∏-Ä–∞–µ-Ç –¥–æ –∫–æ-Å-Ç–µ–π." Any ideas why this might be or how I can solve it?

Yesterday I extracted the subtitles of an MKV file to try and print them. Unfortunately, when I open the .srt file with any text processor, it displays weird characters like the ones included in the title:
"–û–±—ã–≤–∞—Ç–µ–ª–∏ –ø–µ—á–∞–ª—å–Ω—ã.
–í–µ—Ç–µ—Ä –ø—Ä–æ–¥–∏—Ä–∞–µ—Ç –¥–æ –∫–æ—Å—Ç–µ–π."
I thought this had to do with it being an .srt file, but just now I encountered the same problem with an Excel file.
Any ideas why this might be or suggestions as to how to solve it?
Thanks in advance,
Mario

It looks like an encoding problem. You should try opening the file in a text editor where you can choose one of the various possible cyrillic encodings (utf-8, koi8-r, iso-8859-5, win-1251, MacCyrillic)

My iphone suddenly died as well. Holding the sleep button and home button together got it going again. Any ideas why this happens?

my iphone suddenly died as well. Holding the sleep button and home button together got it going again. Any ideas why this happened?

No, I don't think anyone here would know.
Mine has done that once or twice.

Any Ideas on this? (K7N415 PRO)

Similar Messages

Maybe you are looking for