Any ideas why Bonjour might not link

This may be better directed to iStat but I use their monitoring app, iStat Pro on a iPhone 4 and the iStat server on both a Mac Pro (10.6.8) and Macbook Pro Retina (10.8.2)
All devices are on the same network, the two macs are wired (MBP retina via thunderbolt) the phone is obviously wireless. From the phone I'm able to see/load the system stats for the MacPro desk top but I'm not able to do the same with Macbook.I thought Bonjour was default and forget protocol but I'm missing something. Any ideas?
Thanks

There are two good MJPEG CODEC's that work with the Nikon D-90 material and will allow editing in PrPro. The MainConcept and the Morgan have done well. Do not know how well PE will handle it, but if not well, Steve's advice will get it into PE as a DV-AVI Type II file.
Good luck,
Hunt

Similar Messages

  • I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

    I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

    I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

  • In Icloud I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

    In Icloud on my imac I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

    You have to do it app wise, which means that the icon won't show up in settings, but you will be able to move files from your local drive to iCloud via the Numbers app (move... > choose the iCloud option).
    It requires that you set up the same iCloud account on all your devices and that you have the latest version of Numbers on all your devices as well.

  • My Mac won't read cyrillic in certain files and displays instead weird characters like this: "–í–µ-Ç–µ-Ä –ø-Ä–æ–¥–∏-Ä–∞–µ-Ç –¥–æ –∫–æ-Å-Ç–µ–π." Any ideas why this might be or how I can solve it?

    Yesterday I extracted the subtitles of an MKV file to try and print them. Unfortunately, when I open the .srt file with any text processor, it displays weird characters like the ones included in the title:
    "–û–±—ã–≤–∞—Ç–µ–ª–∏ –ø–µ—á–∞–ª—å–Ω—ã.
    –í–µ—Ç–µ—Ä –ø—Ä–æ–¥–∏—Ä–∞–µ—Ç –¥–æ –∫–æ—Å—Ç–µ–π."
    I thought this had to do with it being an .srt file, but just now I encountered the same problem with an Excel file.
    Any ideas why this might be or suggestions as to how to solve it?
    Thanks in advance,
    Mario

    It looks like an encoding problem.  You should try opening the file in a text editor where you can choose one of the various possible cyrillic encodings (utf-8, koi8-r, iso-8859-5, win-1251, MacCyrillic)

  • Some photos from one day are showing up on my photo stream, and others from that same day are not. Any idea why this might be?

    Took a bunch of photos on vacation one day, and it seems like the first batch from one day are not showing up, but then all of a sudden, the ones from the second half of the day are there. They are not showing up on the photostream on my iPhone on which I took the photos, or on my iPad or in iPhoto on my computer. Any idea why this could be happening? All the other photos I took all week showed up on my Photostream.
    Is there anyway to force these photos into the photostream?
    Thanks! Any help would be appreciated!

    photo stream uploads photos from your photo app when it is connected to wifi and the photo app has been closed correctly.  That may be why your seeing photos pop up on different dates
    http://support.apple.com/kb/HT4486

  • IE6/CSS browser issue- any idea why this is not working?

    http://www.wilmerdds.com/test/index.htm
    If you look at the left column, you will see a black box.  It shouldn't be black. it should match the bg color of the column.  Any idea why this is happening?

    Hi
    The problem is that you are using a png, and IE6 does not support png transparency. You could try using the iepngfix from - http://www.twinhelix.com/css/iepngfix/.
    PZ

  • Any idea why setSubject() is not working as expected??

    I am using SmtpMessage's setSubject:
    setSubject( "some subject" )
    but the email I receive says "no subject"
    I have made sure that the subject is being set correctly in the code.
    The email is received and the content of the email (set via setContent) is exactly as I had set it.
    But the subject is missing even though I set it.
    Any idea why this is happening?

    Nope.
    Is there anything unusual about the text you're using
    for the subject? Any newlines, for instance?
    If you turn on session debugging, do you see the
    subject in the protocol trace?

  • Hi my website it working fine on all other browsers but on firefox it is not displaying properly. I was hoping to send a screenshot to see if anyone had any ideas why this might be happening.

    I have nearly finished my website and on all other browsers I have tried the website loads correctly, but some expandable boxes on my website are not displaying on firefox.
    Does anyone have any ideas on how I can fix this.
    [[http://tinypic.com/r/2rwvk7n/5]]
    [[http://tinypic.com/r/69fbdd/5]]
    This is firefox on a mac.

    Can you post a link?
    A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
    The helpers at that forum are more knowledgeable about web development issues.<br />
    You need to register at the mozillaZine forum site in order to post at that forum.<br />
    See http://forums.mozillazine.org/viewforum.php?f=25

  • I have a late 2009 macbook  with osx 10.9.2 i recently added more memory to stop the colored pinwheel from poping up all the time but it has started again any ideas why this might be ty

    my 2009 mac book  has the pinwheel popping up alot any ideas?

    You'd have to look into Activity Monitor utility, to see if any applications or processes are running or hogging system resources; not just RAM (as it may seem OK even if it isn't; esp in Mavericks) but in the areas of hard drive capacities. Could be you have some other issues not just a too-full hard disk drive, or not enough RAM installed.
    Late 2009 MacBook 13-inch:
    Introduced
    October 2009
    Discontinued
    May 2010
    Model Identifier
    MacBook6,1
    Model Number
    A1342
    EMC
    2350
    Order Number
    MC207LL/A
    RAM spec:
    Maximum Memory
    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-8500 (1066MHz) DDR3 SO-DIMM
    •MacBook: How to remove or install memory
    http://support.apple.com/kb/ht1651
    {specs from http://mactracker.ca for MacBook6.1, Late 2009, 13-inch model}
    Another utility that could show you plenty of busywork things going on, is Console. The system logs in there can show a detailed list of tons of activity. Perhaps some of the often-repeated results may be worth considering; and go by the time (day, hour, minute) you notice the spinning wheel; look into the logs from then.
    Have you tried starting up in SafeBoot (shift key held on startup, then login screen appears, hold down shift key again when you login) and then run Disk Utility's repair disk permissions? When done, you could try & restart the computer normally.
    If you happen to get incorrect specification RAM (close but not correct) that could also play into a spinning wheel deal; however the problem may be something else that RAM did not cure. Yet bad or incorrect RAM only adds to a pre-existing issue, since it could not solve it. Same with a System Upgrade. To upgrade to Mavericks with problems already does not mean they would go away; often that makes the first condition harder to resolve.
    Good luck & happy computing!

  • HT1349 When I try to download an audiobook from my library I get a message saying it has not been copied because it cannot be played on this ipod?  Any ideas why this might be I've just downloaded another audiobook from the same library?

    When I try to download an audiobook from my iTunes Library I get the message that 'it was not copied because it cannot be played on this iPod.  I had just downloaded another audio book from the same library to the same iPad so don't know what the problem is?  maxabw

    brackenfromrincon wrote:
    Is it something about "I Shot the Sheriff" that my iPod has a moral disagreement with? It had no issue importing and installing Body Count's "Kop Killa"...
    Not really likely, is it?
    First of all, look on the iPod to see if the song is actually on there. (The last Sync of my Classic resulted in "song not copied... because it cannot be found." The song had previously been on the iPod. I checked and despite the fact that iTunes could not find the file, the song was still on my iPod. I checked the folder and the song was exactly where t was supposed to be. So I simply set iTunes to find it again. What happened? I don't know, iTunes simply threw a wobbly!)
    Second, try another Sync. Does this change anything? If the song was on the iPod, does a second Sync remove the message?  If the song was not on the iPod after the first Sync, does the second one put it on there?
    What happens?

  • Any ideas why PE7 will not handle avi from Pentax Optio w60?

    I am able to work with the avi video files on all of my other software editing programs but PE7 is my favorite. For some reason when I import the avi files from my SD card / Pemtax Optio W60 camera I can only hear the audio in the editing window...no video.
    I am not 100% on this but I have seen some postings on the Pentax forum that says the Pentax AVI video is NOT using DiVX or XvID compression... it is saved using the DV codec. I am not certain that is the codec used on this model...or what that would mean anyway.
    I would appreciate any and all information, suggestions and recommendations to resolve this.

    There are two good MJPEG CODEC's that work with the Nikon D-90 material and will allow editing in PrPro. The MainConcept and the Morgan have done well. Do not know how well PE will handle it, but if not well, Steve's advice will get it into PE as a DV-AVI Type II file.
    Good luck,
    Hunt

  • Any idea, why i can not use "intersect"

    Hi all,
    I am trying to get a intersection of two queries by using the intersect command. B1 does not execute a query with this function. Has anyone an idea, how to do a intersection in B1 query generator ?
    I am using this query :
    SELECT T1.* FROM CRD1 T1
    Intersect
    SELECT T0.* FROM CRD1 T0 WHERE T0.Street Like '%%@%%'
    Regards Steffen

    hi steffen,
    Use Join operator
    SELECT T1.*,T0.* FROM CRD1 T1 JOIN CRD1 T0 ON T0.CardCode = T1.CardCode
    WHERE T0.Street Like '%%[%0]%%'
    Correct me if i am wrong.
    Edited by: Jeyakanthan A on May 29, 2009 3:29 PM

  • HT204655 what i add pictures to photos  then i go to face book to add a photo and it is not there  if i restart my computer the pictures are then in photos using facebook any idea why they are not immediatly availible?

    i go to post on facebook and the piccture i have imprted to photos and i see in photos is not inmy photos to add to post in facebook
    if i restart my computer then they are there  any suggestions appreciated thank you for your time

    I would try quitting your browser and closing down Facebook rather than restarting the whole system.
    My guess would be that, if you have been using Facebook and have already accessed the Photos library, then a snapshot of the library directory (and therefore, pictures) has been taken by Facebook. That may not be updated if you then switch to Photos and import something new, or make changes there, and then switch back to Facebook.
    Restarting Safari, or whatever browser you use, and then re-visiting Facebook may, when you try to add the new picture, refresh the directory and make the change(s) visible.
    This would be my guess, and suggestion.

  • Problem with installing Lightroom 2 onto Macbook Pro running OS10.6.8 - any ideas why it will not install??

    To be able to work on my older laptop on location I wanted to install Lightroom 2 onto a MacBook Pro which runs 10.6.8
    It stops at the end of the installment and tells me to contact Adobe for info.... that's nit very easy anyway.
    Has someone a quick clue on where the issue might be?? Thank's a lot already for your help and effort - Tom

    Cannot connect after upgrading Firefox
    * https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox
    Firefox cannot load websites but other programs can
    * https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
    Check and tell if its working.

  • Pages has started crashing. Any ideas why this might be?

    Pages has started crashing for no apparent reasonexcept perhaps for recent software update. Has anyone had this experience?
    Ndug

    Well let's start with what version of Pages you are using.
    I don't think that you "have not changed anything in several years", especially since you are currently using Lion OSX 10.7.5.
    How did you upgrade to Lion and how did you reinstall iWork/Pages?
    Which iMac do you have and how much RAM is installed?
    Are you using MacDictate to input your text? Does it only crash when you are using MacDictate? Did you successfully use it before it started crashing?
    We do not possess psychic telescopes to see what you are doing at your end. You need to tell us everything that could be relevant.
    That is simply commonsense.
    Peter

Maybe you are looking for

  • PA: module-rtp-recv: Sink does not exist

    Hello Archers, I really would like to route my primary computer's sound via RTP to a remote machine (a laptop, which is used as my home server). Both machines have Pulseaudio set up and local playback on both works fine. Unfortunately on the remote m

  • Where to find P&L details for selected  company code

    If F.01 transaction is transaction is executed it displays assets statement,liabilities statments,profit and loss statment,and etc . of which i need to have P&L A/C details . Please give the information regarding where to get the P&L details and tabl

  • No sound from internal speakers when headphones NOT inserted

    iphone thinks headphone connected when they are not.  can't get sound from internal speakers

  • Data Controls

    Hello, is it possible to create mutiple datacontols in adf application ? OR is it always only one. thx

  • Ok i need help with the moving part below

    basically i am drawing an arc with four small squares (pizza and topping) one s crollbar (x) moves it side ways, and the other scrollbar (y) increase the arc to make it a circle ie a pizza! i have applied border layout etc and now the drawing is gone