Any info on the World Wide Web Consortium

I kind of stumbled on this site, http://www.w3.org/ & was wondering if anyone had some input. A link from the site, lets you do a check of your website to see if it conforms to the open standards of the World Wide Web Consortium (W3C) and checks for various errors. Here's the link http://jigsaw.w3.org/css-validator/
I have three iWeb sites.
1) links directly to my site using web.mac.com/user/site
2) links to my domain name using web forwarding
3) links to my domain name using .mac personal domain
If I put 1 + 2 in the CSS Validator, it says no errors were found & the site conforms to the W3C
If I put site 3, using my domain name as the URL, it says there are errors
If I put the web.mac.com/user/site URL for site 3 it has no errors & says the site conforms to W3C.
So my question is, does any one know if by using .Mac Personal Domain, would it make a difference in how a site would be validated by CSS

The validator just checks to see if there are grammatical errors in the code. Just as in written/spoken human language.
A browser may not understand what is being said. Just as in real life.
Most problems occur in executing the JavaScript.
Also, Firefox cs. have difficulty displaying the shades and mirrors of images. Just because they cannot interpret the JavaScript. W3 cannot check that.
Internet Explorer usually has no idea what a webpage is. Try [this page|http://web.mac.com/wyodor/boxsamples> and [this one|http://web.mac.com/wyodor/hello_world> to get the idea.
My impression is that iWeb is a bit too advanced for some browsers.
Ignoring some minor errors, iWeb pages validate correctly.

Similar Messages

  • How do I set up Mozilla to accept connections on port "The World Wide Web service (HTTP)"?

    When attempting to embed a video in PowerPoint 2013, the message "Sorry we are having some temporary service issues" appears.
    In researching the problem at Microsoft. com, the following message was received: Mozilla is not set up to accept connections on port "The World Wide Web service (HTTP)."

    Hmm... PowerPoint should use Windows to connect to the internet and not Firefox.
    Which method are you using?
    (1) Insert > Video > Online Video
    Apparently there was an update this month that enables this, as described in this support post (see top Answer just after the question): [http://answers.microsoft.com/en-us/office/forum/office_2013_release-powerpoint/embedding-online-you-tube-video-in-powerpoint-2013/0bc00dde-420c-4c6a-bd47-3fb105ce40fc Embedding online you tube video in powerpoint 2013 - Microsoft Community]
    Here's how it should work after the update: [http://office.microsoft.com/en-us/powerpoint-help/insert-or-link-to-a-video-on-youtube-HA104192855.aspx Insert or link to a video on YouTube - PowerPoint]
    (2) Developer > More Controls > Shockwave Flash Object
    As documented on other sites, such as: https://www2.palomar.edu/pages/atrc/2013/09/17/how-to-embed-youtube-video-in-powerpoint-2013/

  • World Wide Web Publishing Service Stopping

    Hi,
    I have Windows Server 2003 Standard Edition R2. The World Wide Web Publishing service keeps stopping randomly, making it impossible for people to access their emails via OWA.
    Would anybody know why this would be occurring and how it could be resolved.
    Regards.

    Hi, I would add to Susie, that depending on your Exchange version, as I guess you are at 2007 (as it support 2003x64), you can repair the IIS website easilly.
    That link got a good todo;
    - How To: Recreate OWA Virtual Directory 2007
    Do you use that IIS to deliver other website ? or only the OWA ?  If only the OWA you can safelly repair it with the Exchange built-in commandshell.
    If you tried in the past to remove the IIS, or such manipulation it break deeply Exchange, thus can lead to a buggy IIS. See that link if you tied some manupulation on the IIS (http://support.microsoft.com/kb/320202/en-us)
    Regards, Philippe
    Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!

  • I see this was not answered or any info on the web site so I will ask again "How do I completely remove CC from my computer"

    I see this was not answered or any info on the web site so I will ask again "How do I completely remove CC from my computer"?
    And don't talk about CC cleaner.
    Howard

    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923

  • World wide web crawling and gateway

    Hi all,We'd like to crawl a world wide web site and open the documents/contents thru the gateway.While we set up the www data source, with the "using gateway" option selected, the portal asks for a web service: which is the correct one? Do we need to create a new one and, if yes, what should we specify in Container URL, Document URL and Upload URL fields?Thanks, Federico

    Hi, I would add to Susie, that depending on your Exchange version, as I guess you are at 2007 (as it support 2003x64), you can repair the IIS website easilly.
    That link got a good todo;
    - How To: Recreate OWA Virtual Directory 2007
    Do you use that IIS to deliver other website ? or only the OWA ?  If only the OWA you can safelly repair it with the Exchange built-in commandshell.
    If you tried in the past to remove the IIS, or such manipulation it break deeply Exchange, thus can lead to a buggy IIS. See that link if you tied some manupulation on the IIS (http://support.microsoft.com/kb/320202/en-us)
    Regards, Philippe
    Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!

  • How to install my WVC210 Wireless-G PTZ Internet Camera so I can view it from any where in the world.

    Hi guys I just bught a
    WVC210 Wireless-G PTZ Internet Camera
    I need to install it so that I can view it from any where in the world. I have no Idea how to do this.
    I would like if some one can send me a video tutorial on how to do it.
    I have a website that I am runing so I guess I can use that if I need something like Hosting and Domain things.
    I want to know if it is posible that I can some how configure it so I can view the camera on one of my websites page.
    For exaple: www.example.com/mycamera???
    If not well I would love to here the options I have.
    Thank you very much in advance!

    Rogerio,
    I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

  • Is i message free any where in  the world ie from canada to the philippines

    is imessage free any where in the world ie canada to the philippines

    Rogerio,
    I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

  • Are the any possibilities in any country of the world recover photos from IPad Air which suddenly became uncervicable without any reason. In Local Iport office I was told they will give me a new one with a guarantee? But my backup is not full.Thank u

    Good Evening! A few days ago my IPad air was working perfectly as always. In the evening I went home and when I opened the cover to swith it on I realised it doesn't work. I tried to energize the battery but got no response. I tried to make a hard reset but also it didn't help. I connected it to my PC with ITunes but it didn't see my IPad. I went to IPort office of my city, they looked, and told they will send me a new one because I still have a guarantee (my device was about 6 months). I had used ICloud but It happened so that the backup is not full and I have lost many very important for me photos of my family. ITunes copy wasn't full also. If anybody knows any Apple service in any city of the world please give me advice where to go to recover data from memory of my device. I understand it's my fault, I didnt properly take care of backup copy and also understand that the answer on my quetion is close to 100 percent negative, and such a companies probably don't exist. But will be really grateful for any advice. Thank you!

    First of all: Your iPhone "present" was most likely hacked/jailbroken. The update you did bricked it and it is now useless. Apple will not repair this.
    Second: The warranty is usually only valid for the country it was purchased in. Check before you buy.
    Third: You can set English as default language  on the iPhone . iPhone supports a myriad of diffrent languages. If you buy it Poland it doesnt matter.

  • I can't download any software using the built in web browser. Any ideas?

    Hey hey! Thanks in advance for everyone's help.
    I just got a new Treo 755p for Verizon. I can't seem to download any software using the built in web browser. When I initiate the download it sits on the download screen and does nothing. I've tried several sources of software all resulting in the same thing.
    Could it be settings on the Treo itself? Not sure! Any ideas would be greatly appreciated.
    Sincerely,
    Minnesota Mike
    Post relates to: Treo 755p (Verizon)

    Hi, and welcome to the Palm Community Forums.
    Where are you trying to download the applications from, and what file format are they?
    Do you have an expansion card installed?
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • I cannot download any apps from the creative cloud web site what can I do?

    I cannot download any apps from the creative cloud web site, what can I do?

    What problem you are facing? any error message.
    What operating system?

  • HT4946 Does iCloud or iTunes back up your contacts?  I can't find any info in the articles that specifically backs up my contacts.

    Does iCloud or iTunes back up your contacts?  I can't find any info in the articles that specifically backs up my contacts.

    It looks like the developer's of that app, or Apple, have got the wrong search name for it in the store - you could try contacting the developer and pointing it out to them so that they can get it corrected. Currently it looks like you can only find the app either by using the link (as you've included in your post), or by searching for the developer's name (Page Foundry Inc) in the store.
    For searching the store, when you search for something then the first result(s) should be those whose title matches what you searched for - so if you search for 'ebook reader' then as there is an app with that exact name it will be first in the results, other apps will then be listed after it.

  • What is World Wide Web or Internet and Internet Browser?

    What is Internet and Internet Browser? I have been searching about this for a long time but all are so deep in knowledge ,simplicity does have no place!

    World Wide Web (WWW) - http://en.wikipedia.org/wiki/World_Wide_Web
    Internet - http://en.wikipedia.org/wiki/Internet
    Web Browser - http://en.wikipedia.org/wiki/Web_browser

  • Hey, I would like to fix firefox on my computer. I can't type on it on any website or the search bar/web bar above! Any and all help would be appreciated. I

    Hey,
    I would like to fix firefox on my computer. I can't type on it on any website or the search bar/web bar above! Any and all help would be appreciated. I had to copy and past this message from explorer.
    Thank you!

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • How i upload a web page named index.html generated by NI Web UI Builder in thin client application on world wide Web

    Hello All,
                   I have an example which use simulated signal with its web service generated by LabVIEW. Then an application of this web service was created using NI web UI builder. And application was build and deployed on NI Cloud Portal, a zip file was downloaded of that project  after build and deploying application.
    The downloaded file contain a thin client application like :index.html page, readme file etc.
                  Now problems is this index.html runs easily on http://localhost:8080/appname/index.html or on my computer name like
    http://iaa42:8080/appname/index.html web page runs and shows updated values in indicators and graphs  but when i use ip address of my system like http://192.168.1.6:8080/appname/index.html , index.html runs but the values in indicator and graphs remains 0 (zero) constantly.     how can i get all indicators and graphs updating continously on by using my ip address like same when i use localhost or computer name in url bar.    1st problem is this.
    Now 2nd question.
                 I get a page index.html in a zip file built by NI web UI builder now i want this page to be viewed by every one world wide
    where should i upload that code. Should NI Cloud Portal be my hosting server for that web page ? or i have to purchase a domain other than NI cloud portal?
     Thanks in Advance
    Regards
    Waqas

    Hi Waqas,
    For your first question, my first thoughts turn to your router (which I assume you are using with a 192.168.x.x address). Are you sure you are configuring your ports and firewalls to allow NI services to function? Here is a really good resource on how to check if your ports and firewalls are configured properly:
    http://www.ni.com/white-paper/12402/en/
    For your second question, when you deploy a web service you are hosting it on your local machine. If you wanted to host it elsewhere (i.e. another server or another domain) you would have to be sure that the server hosting your application has the LabVIEW run-time engine installed. 
    Rick C.

  • HT1382 What is the best method to backup an Iphone 3G and then install newer ios without losing any info on the phone?

    What is the best method to backup an Iphone 3G and then install newer ios without losing any data in the phone?

    How to BackUp  >  http://support.apple.com/kb/ht1766
    Key2Paradice wrote:
    What is the best method to backup an Iphone 3G ...
    Note:
    The iPhone 3G can only update as far as iOS 4.2.1
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

Maybe you are looking for

  • Please help me with some backup questions....

    After suffering through two hard drive failures (not my main drive, fortunately), and being frustrated with trying to keep everything backed up, I'm taking a fresh approach to everything and I plan to do the following: 1.  Purchase a new, 2 TB hard d

  • Creating XSL Mapper extension

    Is there an easy to understand tutorial with all the step to add a component to the "User Defined Extension Functions" pallet. I want to create a function that call a database stored procedure and be able to use it in an xsl map.

  • HOw do i uninstall adobe reader 9

    How do I uninstall adobe reader 9 ?

  • Audit trails in hyperion

    While generating audit trails for planning application, i enabled the option of Auditing->Data. I can also view the changes made by users in Audit records and audit options table in oracle database. The administrator requirement is that through the p

  • Oracle ASM and iscsi?

    We are looking for a low cost solution for some qa databases and I am trying to find out if you can use iscsi storage for running multiple instances using Oracle ASM? Is this supported and is this a good idea? Thx.