Any issues using Microsoft with mountain lion

Thinking of upgrading from lion to M.L but need to know if anyone has had issues with Microsoft

If you are talking about Microsoft Office,it works for Mountain Lion.Using Boot Camp to install Microsoft works too.

Similar Messages

Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

Thank you for this, and to Caleb.
I've tried using Caleb's approach (which is the same as I used with Lion), but the programme doesn't respond now that I have installed Mountain Lion.
My problem is that I do not want to use IE7 but that a programme I need regular access to will only allow IE7 and I've been told by the developers that it is too expensive to upgrade this programme to allow it to be used by other browsers.
So, my puzzle remains the same. I could access IE7 and use the programme using Caleb's solution with Lion. I can't do the same with Mountain Lion. I do (I think!) understand your point about the programme requiring IE7 specifically, but if it worked on Lion, why isn't it working on Mountain Lion? Or was I just lucky before?
I'll try mende1's approach, though I doubt I'm technical enough to virtualise anything!
Thanks again. Any further thoughts welcome.

Problems using iCloud with Mountain Lion on iMac8,1

problems using iCloud with Mountain Lion on iMac8,1 - about 5J old - iMac gets slower and slower - total free memory is used in some minutes - no more reaction on input

Download > http://codykrieger.com/gfxCardStatus Open it and select Integrated Only. It's a bug with NVIDIA graphic cards

Used MBP with mountain lion

hi there,
and please excuse my questions as I'm new to Mac.
I bought a used MBP late 2011, with mountain lion on it. however when I go to app store, it shows mountain lion for 19USD. why is that. and if I reset my mac will it go back to the previous lion OSX??

The link below, that part under the name Kappy, explains what the previous owner should have done before he sold you the machine.
Take a look through and you will probably be able to work out what to do next. It all depends on how close these rules have been followed.
Reset my Mac book pro: Apple Support Communities
Message was edited by: seventy one

Any issues using ALCS with Flex 4?

We're about to move some of our code base to Flex 4, and I wanted to check in advance if there would be any issues with ALCS using Flex 4 Beta 2 and Flash Builder Beta 2.
Thanks,
Rick

Hi,
If you are using player 10 ALCS swc and Whiteboard with Flex 4 and Flash Builder beta 2, it might throw an exception sometimes which has been fixed recently and will be updated in the next drop.
Player 9 ALCS swc should work fine. We haven't done testing extensively on Flex 4 for our framework, so if there are any issues that you come across, please report to us.
Thanks
Hironmay Basu

Question Using Finder with Mountain Lion

In my previous versions of OS X I was able to access files in the sidebar of Finder that I had used or opened recently. There were tabs for "Today", "Yesterday", "Last Week", etc. When I upgraded I noticed they are gone. Is there anyway to get them back? Any help would be appreciated.

Just create a series of Smart Folders for that.

Slideshow in iPhoto11 using iMac with mountain lion OSX10.9

I have made a slideshow in iphoto11 and exported it. Went into imovie11 and selected import. The slideshow was imported to events. How do I burn this slideshow to a DVD. I need to go to mediabrower but it is grey.
I can export the photo album to iMovIe8 create a new project by dragging the photos into a new project. The old photos are of family members and I need the captions for who is who. In the New project using only the photo album, the captions are not on, only when I create a slideshow.
I hope someone can help me, and I hope I have made my problem clearly enough for someone to understand. I also have imported Maverick, the latest version.

What version of iPhoto do you have, 9.5 or one of the earlier versions? You don't need to go from iPhoto to iMovie before going into iDVD. But it's important to know what version of iPhoto you're using.
OT

Is Adobe Photoshop CS5 compatible with Mountain Lion?

I'm interested in getting a new laptop but like using Photoshop CS5. Are there any compatibility issues using CS5 with Mountain Lion?

Generally, users are having no problems with it in ML. Technically, Adobe support CS5.5, 6 and CC in ML, but a lot of folks are running even CS3 in ML.

Any issues using Apache's SOAP version 2 with Weblogic

Hi,
The Weblogic sever is not one in the list of servers that have been tried
succesfully with Apache's SOAP. This is the list:
Apache Tomcat v3.1
IBM WebSphere v3.02
JRun vx.y.z
Microsoft Internet Information Server
Has anyone tried SOAP with Weblogic?
A recent thread mentions some problems (and solutions) with Weblogic and Xerces 1.1.2.
SOAP requires Xerces 1.1.3. Therefore, I would also like to know if there is any issue
using Weblogic with Xerces 1.1.3. I am using Weblogic 4.5 but I would try 5.1 if necessary
for this.
Thanks in advance,
Javier

In the apache soap binary download, there is a soap web application ( in the
form of an exploded war file ). Just copy and paste this directory in the
domain's "applications" directory. You will need to add a servlet-mapping
element in the web.xml file, which could be something like this
<servlet-mapping>
<servlet-name>rpcrouter</servlet-name>
<url-pattern>/rpcrouter/*</url-pattern>
</servlet-mapping>
Cheers
Sandeep
"Jan-Paul" <[email protected]> wrote in message
news:[email protected]...
Do you have something similar for the BEA Weblogic 6.0?
"Sudhir Kolli" <[email protected]> wrote in message
news:[email protected]...
You might want to take look at this:
David Jian <[email protected]> wrote in message
news:[email protected]...
Gavin:
I did the same thing except for servlet register. soap is webapp to WLS,so
I add:
weblogic.httpd.webApp.soap=D:/foo/soap-2_0/webapps/soap
to weblogic.properties. Because sopa20 has a web.xml file in
/foo/soap-2_0/webapp/soap/web-inf, I can only edit it to registerrpcrouter
and keep the default webapp as the same. Otherwise, how do you add thesoap
to you myserver/public_html? Unfortunately, it does not recognize the
URL
when I click the Visit link on soap admin page.
I edit my web.xml as
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2.2.dtd">
<web-app>
<servlet>
<servlet-name>
rpcrouter
</servlet-name>
<servlet-class>
org.apache.soap.server.http.RPCRouterServlet
</servlet-class>
<init-param>
<param-name>ServicesStore</param-name>
<param-value>DeployedServices.ds</param-value>
</init-param>
</servlet>
</web-app>
Can you try this? How did you add your rpcrouter servlet to the defualt
webapp?
Thanks
DJ
"Gavin Hyde" <[email protected]> wrote in message
news:[email protected]...
After several painstaking hours I finally was able to get Apache Soap
v2.0
to work with weblogic. The version of weblogic I'm using is 4.51.
You
can
get Apaceh soap from http://www.apache.org/soap. This version of Soap
requires xerces v 1.2.1 which you can get from
http://www.apache.org/xerces-j. To make it work with weblogic you
have
to
first place the soap.jar file included with Apache soap and thexerces.jar
file in both the classpath AND WEBLOGIC_CLASSPATH. Don't ask me why
but
I
wasn't able to get it to work without it in both. Next you have to
add
the
directory that your class files reside in to the classpath. Next you
have
to register the RCPRouter servlet in weblogic. The line to do thislooks
like this:
weblogic.httpd.register.rpcrouter=org.apache.soap.server.http.RPCRouterServl
et
where rpcrouter can be any name you want to use to call the routerservlet.
That's all I had to do to set it up to view the stock quote example
and
the
address book. The calculator is giving me a few other probems at the
moment. Don't forget to deploy the different services but the command
for
that is given in the readme file for each example. For the router URL
I
used http://localhost:7001/rpcrouter which is that servlet you
registered
above.
Gavin
"Javier Deniz" <[email protected]> wrote in message
news:[email protected]...
Hi,
The Weblogic sever is not one in the list of servers that have been
tried
succesfully with Apache's SOAP. This is the list:
Apache Tomcat v3.1
IBM WebSphere v3.02
JRun vx.y.z
Microsoft Internet Information Server
Has anyone tried SOAP with Weblogic?
A recent thread mentions some problems (and solutions) with Weblogic
and
Xerces 1.1.2.
SOAP requires Xerces 1.1.3. Therefore, I would also like to know if
there
is any issue
using Weblogic with Xerces 1.1.3. I am using Weblogic 4.5 but I
would
try
5.1 if necessary
for this.
Thanks in advance,
Javier

Update Ruby with Mountain Lion

I have successfully updated Ruby in the past with Snow Leopard 10.6.3 and 10.6.8; however, I'm having an issue doing so with Mountain Lion 10.8.2. I have searched all over, trying to use Homebrew as well as RVM. RVM is shown to be not instaled. I used Jewelrybox, and it installed, showing .bash_profile. But RVM command is showing as an invalid command. I also upgraded Ruby that way as well as with Homebrew. So I have updated Ruby twice with 2 different methods, but running Ruby -v show older 1.8.7. How do I make the path to show the new updated Ruby. I have tried so many ways. Last resort... ask communty. Thanks!

I chose not to try and update the Ruby that is installed by OS X, but I did successfully install the Ruby Version Manager (rvm) into my $HOME/.rvm.
If you are the sole account on your machine, or the only one using Ruby, then you do not want to be root or use sudo when installing rvm, as these permissions imply multi-user usage and (if I remember correctly) will place it in /usr/local/ruby-rvm.
Start over. Remove any reference to rvm in .bashrc, .bash_login, and .zshrc. Any reference to rvm in these files will bork a subsequent install.
Remove $HOME/.rvm if it already exists.
Again, for reference, here is the rvm installation and setup steps. The site has other useful info on gemsets and Rails.
I chose to install ruby-1.9.3-head as default.
In your Ruby scripts, the first line should look like this:
#! /usr/bin/env ruby
This picks up the rvm ruby version.
The first part of my PATH entry in my .bashrc file looks like this:
export PATH=.:~/bin:~/.rvm/bin:$PATH
You should have a working Ruby in no time.
PS: You will need 1.9.3 minimum to get the Ruby code compiled under OS X. Pay attention to the Ruby requirements during install.

Use iWeb in Mountain Lion

Hi Guys
I wanted to great a hompage with iWeb during my exchange year.
unfortunately I realized that mobileme was shut down so I can't use any of the widgets ore publish the page.
so do anyone knows if ther is a way to use iWeb?
would be great!

iWeb has two other publishing options...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... and there are plenty of choices for hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
You can find alternatives for most of the MobileMe only features...
http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html
Some info about using iWeb with Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

Express 802.11n model A1264 not compatible with Mountain Lion?

I have an airport Express 802.11n model A1264. I have been using it with Mountain Lion for a couple of months. Some problems but it worked. Last nite it stopped. - flashing orange light. I am using Airport Utility version 6.1. The helpful? lady at apple support said that model of Airport Express (Gen 1 ) was not compatable with Mountain Lion and I need to get a Generation 2 Airport Express. Is there any other solution?

Hardware failure is a possibility but your Express is most certainly compatible with your version of Mac OS X.
weaversue wrote:
... I had pushed in the reset button on the AU Express -
To properly reset it to factory defaults requires that you depress its reset button continuously for about five seconds - long enough for the LED to flash rapidly, then release it.
After this the Express will create an open wireless network called "Apple Network nnnnnn" where nnnnnn = a set of characters unique to your Express.
Connect to that network by selecting it in the menu.
Launch AirPort Utility. It should find the Express.
If you are still having trouble unplug the Express and plug in to an electrical outlet near your iMac. Not only does this make it easier to perform another "hard reset" should you need to, it minimizes the potential for wireless interference to prevent communication. There is no need to have it connected to your modem as you configure it.
Only after doing all this should you begin to suspect the Express has simply failed. In that case bring it back to Apple for a final determination.
Don't let them tell you it is not compatible with Mountain Lion because I use the exact same one all the time. Even its preceding model is compatible.

Original mbox with mountain lion

I have an original m box which works with snow leopard. Has anyone got experience using it with mountain lion?

I've been able to make it work on 10.8.2 as a standalone audio interface (ITunes, etc) using the workaround explained at the following link involving Soundflower and PureData. http://duc.avid.com/showthread.php?p=1894515 You need of course the DigiCore Audio Manager (last version which supported the original MBox is 7.4.2).

HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

HI. ...
Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
I have heard rumours in the past is that all sorted now?

At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

TS3276 On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Any issues using Microsoft with mountain lion

Similar Messages

Maybe you are looking for