Any issues with10.6.5 or 10.6.6 concerning video leave feedback

Just noticing lots of video issues regarding these latest software updates and not sure if everyone is trying to fix the issues here on the forum or going to Apple Retail Stores or calling AppleCare. If you have the time and don't wan't to call applecare or unable to leave feedback about the bugs and issues at apple.com/feedback... most issues like this are not caught though retail stores so it's always good to call in or send feedback in so the engineers can know more about the issue. I know there are apple employees monitoring the boards but not sure if they escalate issues on the board as well so just to have some community feedback will really help out!

I looked at the first one - I see the same behaviour here on 5.1.10
When viewed in Safari, the vimeo iframe code is defaulting to 'HD' from the several HTML5 versions of video available - the oddness around 3.38 (screenshot below) is visible on that version in any browser, or even if downloaded & played in quicktime. Firefox defaults to Flash, here anyway. Switching 'HD' off in the player, loads a different file, without the problems.
I haven't looked in Safari 6 - but it's presumably using a different file.
Vimeo's conversion seems to have slipped up.

Similar Messages

The first boot of iphone 5 is not possible due to lack of battery charge , it happened after charging, is there s any issue of battery life

the first boot of iphone 5 is not possible due to lack of battery charge , it happened after charging, is there s any issue of battery life

Charge the phone for 15 minutes with the Apple charger. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears.

Any Issues with X250 and Using 3 Monitors?

With input from this forum, I went ahead and ordered an X250. ETA first week of April. Thank you... (ask me in May if I am still as grateful )
My plan is to also purchase an Ultra dock and use the screen on the notebook as well as two external displays. I did some research and understand certain video ports take priority over others, but this should no be an issue.
After reading another thread (here) I am concerned this setup may not be as reliable as one would hope. I realize the thread references an X240 (not an X250), but would like to know if others have a 3 display setup with the X250 and if they enountered any issues?
Thanks again. This group has provided a wealth of information that has essentially kept me in the Lenovo camp. I currently use a W520 and was pretty close to moving another manufacturer altogether.
Solved!
Go to Solution.

Hi Technobob,
I'm using a ThinkPad X240 daily on a ThankPad Ultra Dock with two 1920x1080 DisplayPort monitors simultaneously with the X240 LCD. Also have an X250 which occasionally gets plugged in to the same dock and all three monitors work, no issues.
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

Any issues with using LDAP on LINUX for GRC 5.2 UME?

Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.

I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

My new IPad 3 cannot connect to WIFI even it has a full bar of the reception. In the same location, my PC and my smart phone get a full bar connection without any issues. How can I do to fix the issues (can I switch to IPad 2)?

My new Ipad 3 cannot connect to WIFI even it has a full bar of reception. In the same location, my Windows 7 PC and Andorid Smart phone can connect to the same WIFI without any issues. How can I fix it? Without WIFI, the WIFI only IPAD is nearly useless. If it cannot be fixed, can I get a replacement for IPad 2?

Take it to an Apple Store for evaluation. If defective, you'll get a replacement.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks

29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates <

I have 2 sons that were sharing one account and now I want to separate them, will I run into any issues ?

I have twin sons and my wife sharing one itunes account and now from what a relative told me I should split them up since face time from my sons itouch is showing up on my wife's iphone ... so I started a new itunes account for all 3 of them, and now I want to sync each of their devices with their own accounts, before they had all the same music, etc... will I run into any issues when syncing each of their devices... meaning will I see a message like "this device is synced with another account and then it will say if I proceed it will erase what is on the device" ... ?? will I see this or will it just sync as normal
Thanks

You can't merge accounts or transfer iTunes purchases from one Apple ID to another: but there is no problem about using two IDs.
Use your iCloud ID for iCloud for syncing email, contacts, calendars, bookmarks, and PhotoStream.
Use your other Apple ID as before for iTunes, iTunes in the Cloud and iTunes Match.
There's no conflict about doing this, and you won't even notice as Keychain will log you in with the correct ID in each case. It's also better security not to have your iTunes login also your email address, given the number of complaints about hacked iTunes accounts.

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!.

Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

There are some upgrade options available from do it yourself sites.
See the MBair SSD upgrades on mid way down this page:
http://eshop.macsales.com/shop/SSD/OWC/

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

I have not had any issue with Itunes on my PC until recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does ths happen please. I have windows XPPOdany ic

I have not had any issue with Itunes on my PC until very recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does this happen please as it is driving me crazy!.

What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)

My 3GS will not charge. I have tried it from my computer and from a wall socket. I also have tried another computer and a different cable with no luck. My computer doesnt see the device either. I havent had any issues until now. Any ideas?

My 3GS will not charge. I have tried it from my computer and from a wall socket. I also have tried another computer and a different cable with no luck. My computer doesnt see the device either. I havent had any issues until now. Any ideas?

bring it to Apple for battery diagnostics.

Can I have two apple TV boxes in the same home / wifi area, ar there any issues i should be aware of?

can I have two apple TV boxes in the same home / wifi area, are there any issues i should be aware of?

I was in a hotel a few month a ago. The hotel also had a portal page you have to sign in. Of course the ATV didn't a web browser and could not sign in to the portal and connect to the Internet, so your iTunes didn't work. (But your ATV should be connected to the router at that point already, just the portal won't open the port to pass through your ATV's traffic)
So what I did was to use AirVideo app on my iPad and AirVideo server on my Mac. Selected the movie on my iPad using the AirVideo app and then selected my AirPlay device on my iPad to AppleTV. Because this setup didn't require iTunes, so there was no need for a live Internet connection, and just a connection to the hotel router was enough. It was very easy.
(Of course, you can subsititude the iPad with an iPhone here too)

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?
It has been quite a while since Apple came up with Map App of their own and should be releasing improved maps with more capabilities in India.
Cheers!
Abhishek

No one here can answer your question, as there is no one from Apple here, & no one here represents Apple or speaks for Apple.

Any issues with10.6.5 or 10.6.6 concerning video leave feedback

Similar Messages

Maybe you are looking for